Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Carbides in lunar soils and rocks

Carbides and the surrounding metal of eight particles from Apollo 14, 16, and 17 soils were analyzed for C, Fe, Ni, and Co with the electron microprobe. In addition, carbide-containing metal particles in two Apollo 17 rocks were studied. Carbide-metal assemblages were found in anorthositic hornfels, melt rock, and agglutinate, but not in any primary igneous rocks. Carbon measurements show that cohenite is the carbide phase present in all the samples. Cohenite exsolves from the carbon-rich metal phase during cooling of the lunar metal particle in the host rocks or soil fragments. Measurements of two-phase interface compositions indicate equilibration for carbides and metal during cooling below 600 C and possibly below 500 C.

Goldstein, J. I.↗
NASA NTRS1977

Comparison of lunar rocks and meteorites: Implications to histories of the moon and parent meteorite bodies

There are many similarities between lunar samples and stone meteorites. Lunar samples, especially from the highlands, indicate that they have been affected by complex and repeated impact processes. Similar complex and repeated impact processes have also been operative on the achondritic and chondritic meteorites. Similarities between lunar and meteoritic rocks are discussed as follows: (1) Monomict and polymict breccias occur in lunar rocks, as well as in achondritic and chondritic meteorites, having resulted from complex and repeated impact processes; (2) Chondrules are present in lunar meteorites, as well as in a few achondritic and most chondritic meteorites. They apparently crystallized spontaneously from molten highly supercooled droplets which may have formed from impact melts or, perhaps, volcanic processes (as well as from the solar nebula, in the case of meteoritic chondrites); (3) Lithic fragments vary from little modified (relative to the apparent original texture) to partly or completely melted and recrystallized lithic fragments. Their detailed study allows conclusions to be drawn about their parent rock types and their origin, thereby gaining insight into preimpact histories of lunar and meteoritic breccias. There is evidence that cumulate rocks were involved in the early history of both moon and parent meteorite bodies.

Prinz, M.↗
NASA NTRS1977

The surface abundance and stratigraphy of lunar rocks from data about their albedo

The data pf ground-based studies and surveys of the lunar surface by the Zond and Apollo spacecraft have been used to construct an albedo map covering 80 percent of the lunar sphere. Statistical analysis of the distribution of areas with various albedos shows several types of lunar surface. Comparison of albedo data for maria and continental areas with the results of geochemical orbital surveys allows the identification of the types of surface with known types of lunar rock. The aluminum/silcon and magnesium/silicon ratios as measured by the geochemical experiments on the Apollo 15 and Apollo 16 spacecraft were used as an indication of the chemical composition of the rock. The relationship of the relative aluminum content to the age of crystalline rocks allows a direct dependence to be constructed between the mean albedo of areas and the age of the rocks of which they are composed.

Shevchenko, V. V.↗
NASA NTRS1977

Exposure ages and erosion rates for lunar rocks

The available data on the effects of particle bombardment of lunar rocks are examined, taking into account rare gas data, neutron capture products, radioactive nuclei, and particle tracks. Attention is given to exposure ages, questions concerning the validity of exposure ages, the location of rocks during irradiation, the criteria for valid crater ages, special problems regarding lunar breccias, surface residence times from long lived radioactive nuclei, surface residence times from galactic cosmic ray track data, rocks with simple surface exposure, rocks with complex surface exposure, limits on surface residence times, suntan and subdecimeter ages, erosion rates, and a number of case histories related to exposure age measurements as applied to the problem of the dating of impact events.

Burnett, D. S.↗
NASA NTRS1977

Lunar Science Conference, 8th, Houston, Tex., March 14-18, 1977, Proceedings. Volume 1 - The moon and the inner solar system. Volume 2 - Petrogenetic studies of mare and highland rocks. Volume 3 - Planetary and lunar surfaces

Solar system processes are considered along with the origin and evolution of the moon, planetary geophysics, lunar basins and crustal layering, lunar magnetism, the lunar surface as a planetary probe, remote observations of lunar and planetary surfaces, earth-based measurements, integrated studies, physical properties of lunar materials, and asteroids, meteorites, and the early solar system. Attention is also given to studies of mare basalts, the kinetics of basalt crystallization, topical studies of mare basalts, highland rocks, experimental studies of highland rocks, geochemical studies of highland rocks, studies of materials of KREEP composition, a consortium study of lunar breccia 73215, topical studies on highland rocks, Venus, and regional studies of the moon. Studies of surface processes, are reported, taking into account cratering mechanics and fresh crater morphology, crater statistics and surface dating, effects of exposure and gardening, and the chemistry of surfaces.

Merril, R. B.↗
NASA NTRS1977

Petrology of Apollo 15 black-and-white rocks 15445 and 15455 - Fragments of the Imbrium impact melt sheet

The paper describes two macroscopically similar black-and-white rocks, 15445 and 15455, which were collected from the rim of Spur Crater on the Apennine Front. The two Apollo 15 rocks are very similar in chemistry and clast population, but the matrix of 15455 is finer grained than that of 15445. The 15445 sample contains a lithic clast assemblage of plutonic/metamorphic spinel troctolite, troctolite, norite, and anorthosite, and its fine-grained vesicular black coherent matrix consists of a melt-bonded aggregate of small mineral clasts which are mainly olivine, plagioclase, and pink spinel. The two rocks are distinct from any other large samples from the Apollo 15 site. It is suggested that the rocks are samples of an impact melt sheet which forms a bedrock unit of the Apennine Front, and that this melt sheet did not form in a local small-scale event but was produced during the Imbrium impact event.

Ryder, G.↗
NASA NTRS1977

SCCRV, a major component of highlands rocks

An investigation was conducted of the composition of lunar highlands samples rich in mafics. Most of the samples were Apollo 16 rocks. The compositional data for 13 lunar rocks are listed in a table. The nonpristine rocks 64815 and 77545 having essentially identical KREEP contents of about 32% have very similar, high contents of the mafic component SCCRV. The same amounts of rather similar ingredients were mixed at locations 1000 km apart. The composition of SCCRV is discussed. According to the three most plausible hypotheses for the origin of SCCRV which are proposed the SCCRV is primordial material, SCCRV consists entirely or mainly of a single type of lunar rock, or SCCRV resulted from the mixing of two or more lunar materials.

Wasson, J. T.↗
NASA NTRS1977

Exposure histories of lunar rocks 71135 and 71569

Rare-gas isotopic analyses have been performed on lunar rocks 71135 and 71569. The conventional (Kr-81)-Kr cosmic-ray exposure ages are 103 + or - 3 m.y. for 71135 and 134 + or - 7 m.y. for 71569. An approach is outlined to deducing complex exposure histories from rare-gas data using depth profiles of the production rates of the cosmogenic rare-gas isotopes. Examination of the Xe isotopes by means of a 'concordia' plot suggests that 71569 may have a simple one-stage exposure history whereas 71135 has a more complex history. An attempt is made to construct exposure models for these two rocks which account for the abundances of all the cosmogenic rare gases, the Xe isotopic compositions, and the apparent (Kr-81)-Kr exposure ages. This study demonstrates the depreciation of (Kr-81)-Kr ages for rocks exposed at shallow depths, caused by the relatively rapid variation of the Kr-81 production as the rock is eroded. Possible implications of the tentative results for the formation age of the Central Cluster unit are discussed.

Niemeyer, S.↗
NASA NTRS1978

Some observations on the mechanism of aircraft wing rock

A pressure scale model of Northrop F-5A was tested in NASA Ames Research Center Eleven-Foot Transonic Tunnel to simulate the wing rock oscillations in a transonic maneuver. For this purpose, a flexible model support device was designed and fabricated which allowed the model to oscillate in roll at the scaled wing rock frequency. Two tunnel entries were performed to acquire the pressure (steady state and fluctuating) and response data when the model was held fixed and when it was excited by flow to oscillate in roll. Based on these data, a limit cycle mechanism was identified which supplied energy to the aircraft model and caused the Dutch roll type oscillations, commonly called wing rock. The major origin of the fluctuating pressures which contributed to the limit cycle was traced to the wing surface leading edge stall and the subsequent lift recovery. For typical wing rock oscillations, the energy balance between the pressure work input and the energy consumed by the model aerodynamic and mechanical damping was formulated and numerical data presented.

Hwang, C.↗
NASA NTRS1979

Some observations on the mechanism of aircraft wing rock

A scale model of the Northrop F-5A was tested in NASA Ames Research Center Eleven-Foot Transonic Tunnel to simulate the wing rock oscillations in a transonic maneuver. For this purpose, a flexible model support device was designed and fabricated, which allowed the model to oscillate in roll at the scaled wing rock frequency. Two tunnel entries were performed to acquire the pressure (steady state and fluctuating) and response data when the model was held fixed and when it was excited by flow to oscillate in roll. Based on these data, a limit cycle mechanism was identified, which supplied energy to the aircraft model and caused the Dutch roll type oscillations, commonly called wing rock. The major origin of the fluctuating pressures that contributed to the limit cycle was traced to the wing surface leading edge stall and the subsequent lift recovery. For typical wing rock oscillations, the energy balance between the pressure work input and the energy consumed by the model's aerodynamic and mechanical damping was formulated and numerical data presented.

Hwang, C.↗
NASA NTRS1978

Dust, impact pits, and accreta on lunar rock 12054

The large variation in the areal density of meteoroid impact pits observed over the face of lunar rock chip 12054,54 was previously attributed to variable amounts of shielding of this chip by loosely bound dust. However, an examination of the directionality of flow of the disk and splash accreta on this chip now suggests that the regions with low areal densities of pits and disk accreta were geometrically shielded by a formerly overhanging part of the rock. The 'overhang' is postulated to have broken off during the return of this rock to earth. There remains, nevertheless, considerable evidence for shielding of rock and grain surfaces on the lunar surface by loosely bound dust. The areal extent and depth of deposition of dust is still poorly understood, however. Populations of disk (or pancake) accreta and 'solid' accreta that show evidence of melting are shown to be correlated with impact pit densities. The population of solid angular accreta with exteriors that exhibit little evidence of melting shows no correlation with impact pit densities.

Zook, H. A.↗
NASA NTRS1979

Lunar basalts and pristine highland rocks - Comparison of siderophile and volatile elements

The objective of the present paper is to compare pristine highland rocks and low-Ti mare basalts on the basis of all 53 Chicago analyses of these to types of rock. Apart from being of interest in its own right, such a comparison provides a test of Delano and Ringwood's (1979) contention that 'abundances of Ge, Au, and other siderophile elements in pristine highland rocks are not consistent with magmatic differentiation'. The other topics reexamined in this paper are the correlation of siderophiles and volatiles in pristine rocks with Rb and Cs (likewise questioned by Delano and Ringwood), the relationship of 'non-mare' basalts (14053, 60639) to their mare counterparts, and the abundance of some incompatible elements in the lunar bulk.

Wolf, R.↗
NASA NTRS1981

Dynamic tensile strength of lunar rock types

The dynamic tensile strength of four rocks are determined. A flat plate impact experiment is employed to generate approximately one-microsecond-duration tensile stress pulses in rock samples by superposing rarefaction waves to induce fracture. It is noted that the effect of chemical weathering and other factors has not been explicitly studied. The given tensile strengths are based on a series of experiments on each rock where determination of incipient spallation is made by terminal microscopic examination. The data are generally consistent with previous determinations, at least one of which was for a significantly chemically altered but physically coherent rock.

Cohn, S. N.↗
NASA NTRS1982

Hydrothermally altered impact melt rock and breccia - Contributions to the soil of Mars

An examination is made of samples of melt rock and breccia from 12 terrestrial impact craters to identify alteration minerals and their conditions of formation. It is found that in most cases the dominant assemblage is clay-silica-K feldspar-zeolite, suggesting hydrothermal alteration at low pressures and temperatures of 100-300 C. The clays are in the main Fe-chlorites and smectites, in most cases depleted in Al and enriched in Fe and Mg relative to their source rocks. The alteration of impact glass is found often to be complete, whereas the alteration of crystalline melt rock is limited to a few percent of the rock volume. Impact breccia is altered to only a slight extent compared with the alteration of glass. It is believed that impact-induced hydrothermal alteration is to be expected at Martian impact sites if significant quantities of ground ice and/or water are present.

Allen, C. C.↗
NASA NTRS1983

Workshop on Pristine Highlands Rocks and the early History of the Moon

Oxide composition of the Moon, evidence for an initially totally molten Moon, geophysical contraints on lunar composition, random sampling of a layered intrusion, lunar highland rocks, early evolution of the Moon, mineralogy and petrology of the pristine rocks, relationship of the pristine nonmore rocks to the highlands soils and breccias, ferroan anorthositic norite, early lunar igneous history, compositional variation in ferroan anosthosites, a lunar magma ocean, deposits of lunar pristine rocks, lunar and planetary compositions and early fractionation in the solar nebula, Moon composition models, petrogenesis in a Moon with a chondritic refractory lithophile pattern, a terrestrial analog of lunar ilmenite bearing camulates, and the lunar magma ocean are summarized.

Longhi, J.↗
NASA NTRS1984

An evaluation of thematic mapper simulator data for the geobotanical discrimination of rock types in Southwest Oregon

Rock type identification may be assisted by the use of remote sensing of associated vegetation, particularly in areas of dense vegetative cover where surface materials are not imaged directly by the sensor. The geobotanical discrimination of ultramafic parent materials was investigated and analytical techniques for lithologic mapping and mineral exploration were developed. The utility of remotely sensed data to discriminate vegetation types associated with ultramafic parent materials in a study area in southwest Oregon were evaluated. A number of specific objectives were identified, which include: (1) establishment of the association between vegetation and rock types; (2) examination of the spectral separability of vegetation types associated with rock types; (3) determination of the contribution of each TMS band for discriminating vegetation associated with rock types and (4) comparison of analytical techniques for spectrally classifying vegetation.

Weinstock, K. J.↗
NASA NTRS1984

Subcritical crack growth and other time- and environment-dependent behavior in crustal rocks

Stable crack growth strongly influences both the fracture strength of brittle rocks and some of the phenomena precursory to catastrophic failure. Quantification of the time and environment dependence of fracture propagation is attempted with the use of a fracture mechanics technique. Some of the difficulties encountered when applying techniques originally developed for simple synthetic materials to complex materials like rocks are examined. A picture of subcritical fracture propagation is developed that embraces the essential ingredients of the microstructure, a microcrack process zone, and the different roles that the environment plays. To do this, the results of (1) fracture mechanics experiments on five rock types, (2) optical and scanning electron microscopy, (3) studies of microstructural aspects of fracture in ceramics, and (4) exploratory tests examining the time-dependent response of rock to the application of water are examined.

Swanson, P. L.↗
NASA NTRS1984

Subcritical Fracture Propagation in Rocks: an Examination Using the Methods of Fracture Mechanics and Non-Destructive Testing

An experimental investigation of tensile rock fracture is presented with an emphasis on characterizing time dependent crack growth using the methods of fracture mechanics. Subcritical fracture experiments were performed in moist air on glass and five different rock types at crack velocities using the double torsion technique. The experimental results suggest that subcritical fracture resistance in polycrystals is dominated by microstructural effects. Evidence for gross violations of the assumptions of linear elastic fracture mechanics and double torsion theory was found in the tests on rocks. In an effort to obtain a better understanding of the physical breakdown processes associated with rock fracture, a series of nondestructive evaluation tests were performed during subcritical fracture experiments on glass and granite. Comparison of the observed process zone shape with that expected on the basis of a critical normal principal tensile stress criterion shows that the zone is much more elongated in the crack propagation direction than predicted by the continuum based microcracking model alone.

Swanson, P. L.↗