Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regolith”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Conceptual design of equipment to excavate and transport regolith from the lunar maria

NASA hopes to have a manned lunar outpost completed by 2005. In order to establish the base, regolith must be excavated from the lunar surface. Regolith will be used as a source for life-supporting elements and as radiation shielding for the lunar outpost. The design team from the University of Texas at Austin designed excavation and transportation equipment for initial operations of the lunar base. The design team also characterized the elements to be found in the regolith and determined the power required to excavate regolith. The characterization of the soil was based on a literature review of lunar geography. Power requirements for excavation were developed by adapting terrestrial equations for excavation power requirements and adapting them to lunar soil conditions. The design of the excavation and transportation equipment was broken into three functions: loosing, collecting, and transporting. A scarifier was selected to loosen, a bucket was selected to collect, and a load-haul system was selected to transport. The functions are powered by a modular fuel cell powered vehicle that provides power for motion of the equipment.

Detwiler, Mark↗

Geochemical comparison of impact glasses from lunar meteorites ALHA81005 and MAC88105 and Apollo 16 regolith 64001

Parameterizations have been developed for impact glass compositions which makes its possible to acquire geochemical information about pre-impact target materials. The impact glass populations among unrelated highland regoliths including Apollo 16 regolith 64001 and the lunar meteorites ALHA81005 and MAC88105 have been compared. It is concluded that the Apollo 16 impact glasses are compositionally more diverse than those in the lunar meteorites. This diversity reflects the complex geology of the Apollo 16 region, in which extensive exposures of mare basalts occur within 300 km. Apollo 16 regolith 64001 contains a distinctive subset of impact glasses with major element compositions similar to lunar highland meteorite. These impact glasses (less than 100 micrograms) indicate that the lunar highlands are geochemically more diverse than the compositional range currently represented by large (more than 1 gram) samples. Lunar impact glasses provide geochemical constraints on the full range of regolith compositions that occur on the moon.

Delano, John W.↗

Impact-induced thermal effects in the lunar and Mercurian regoliths

Thermal effects of micrometeoroid impact into the regoliths of the moon and Mercury, and some comparisons between the regoliths of the two bodies are presented. The impact calculations used to estimate the volumes of melt and vapor produced in the regoliths of the two bodies are described. An overview of the process of impact metamorphism in a modeled regolith target is presented, in which the roles played by impact velocity and target temperature in determining the quantities of melt and vapor are evaluated. The model impact process and fluxes are combined to estimate the production rates for impact melt and vapor on the two bodies, and the results are compared with those of previous studies. It is concluded that the rates of impact melting and vaporization on Mercury are much greater than on the moon. In a given period of time, a factor of 14 times more melt and 20 times more vapor are produced on Mercury than on the moon. A 'typical' Mercurian microcratering event produces 2.6 times more melt than its lunar counterpart; the flux calculated for Mercury is 5.5 times higher than it is at the moon.

Cintala, Mark J.↗

Conceptual design of a fleet of autonomous regolith throwing devices for radiation shielding of lunar habitats

The National Aeronautics and Space Administration (NASA) in conjunction with Universities Space Research Association (USRA) has requested that the feasibility of a fleet of regolith tossing devices designed to cover a lunar habitat for radiation protection be demonstrated. The regolith, or lunar soil, protects the lunar habitat and its inhabitants from radiation. Ideally, the device will operate autonomously in the lunar environment. To prove the feasibility of throwing regolith on the Moon, throwing solutions were compared to traditional, Earth-based methods for moving soil. Various throwing configurations were investigated. A linear throwing motion combined with a spring and motor energizing system proved a superior solution. Three different overall configurations for the lunar device are presented. A single configuration is chosen and critical parameters such as operating procedure, system volume, mass, and power are developed. The report is divided into seven main sections. First, the Introduction section gives background information, defines the project requirements and the design criteria, and presents the methodology used for the completion of this design. Next, the Preliminary Analysis section presents background information on characteristics of lunar habitats and the lunar environment. Then, the Alternate Designs section presents alternate solutions to each of the critical functions of the device. Fourth, a detailed analysis of throwing the regolith is done to demonstrate its feasibility. Then, the three overall design configurations are presented. Next, a configuration is selected and the conceptual design is expanded to include system performance characteristics, size, and mass. Finally, the Conclusions and Recommendations for Future Work section evaluates the design, outlines the next step to be taken in the design process, and suggests possible goals for future design work.

Armstrong, Karem↗

Impact melting and vaporization in planetary regoliths

The thermal phenomena attending high-velocity impact have profound effects on virtually every aspect of the physical, chemical, and optical evolution of planetary regoliths. Not only do impacts pulverize, redistribute, and mix the various components of a regolith, but they also fuse and vaporize them - changing crystalline material to glass, releasing trapped or implanted gases, and spreading vaporized products across the planet's surface, among many other things. Those wishing to understand the details of regolith evolution must incorporate the effects of impact into their approach to the problem. Derived from a more extensive contribution, a short summary of the thermal processes accompanying impact into planetary regoliths, with the immediate acknowledgment that it is neither exhaustive in its consideration of the existing literature nor exact in any of its treatments, is presented. The reader desiring more information is directed to the relevant papers cited at the end; should they fail to provide satisfaction, he or she is then heartily encouraged to attack the problem immediately.

Cintala, Mark J.↗

Optical effects of regolith processes on S asteroids as simulated by laser impulse alteration of ordinary chondrite

The spectral properties of some powdered chondrites and minerals altered by Isser impulse are studied in order to estimate possible optical effects of regolith processes (micrometeoritic bombardment). Gradual reduction of overall reflectance and spectral contrast, the increase of continuum slope, the increase of spectrally derived olivine/pyroxene ratio and Fs content of orthopyroxene with increasing alteration degree show that regolith processes could affect optical properties of surface material more heavily than has been previously appreciated. Ordinary chondrites (OC's) are known to account for 80 percent of observed meteorite falls, but so far no main belt parent bodies have been identified for these meteorites. S-asteroids resemble OC's spectrally, but are characterized by a steeper red continuum unlike that of OC's and their spectrally derived mineralogies are far outside OC range. Attempts were made to explain the spectral mismatch between OC's and S asteroids by some process, which alters optical properties of uppermost regolith. However, the spectral studies of shocked (black) OC's, gas-rich OC's, melted OC's and synthetic metal-rich regoliths derived from OC's demonstrate that such altered OC materials darken, but do not redden.

Moroz, L. V.↗

Vapor Deposits in the Lunar Regolith

Since the Apollo missions, we have emphasized the following points, which are based on theoretical calculations and on laboratory studies of the properties of evaporated silicate deposits and of lunar samples. The mass of vapor generated by impacts on the lunar surface is comparable in magnitude to the mass of impact melt glasses; the physics of impact into a porous regolith requires that much of this vapor be retained in the soil rather than lost to space (as is widely believed); experimental coatings made from vaporized or sputtered lunar basalt contain abundant inclusions of submicroscopic, super paramagnetic metallic Fe; and this Fe may explain the magnetic signature, low albedo, reddened spectrum, and subdued absorption bands of lunar regolith. Our conclusions have been generally rejected by the lunar geochemical community for two reasons: there seemed to be no direct evidence for vapor deposits in Apollo samples, and it seemed that the lunar optical properties could be explained by the presence of impact melt glasses alone. However, advances in our understanding of the optical properties of glasses and of light scattering by planetary regoliths, and now the direct detection of vapor deposits, show that these objections are not valid. Vapor phase transport is a major process on the lunar surface, and unless its effects are taken into account, the chemical, magnetic, and optical properties of the regolith cannot be understood.

Hapke, Bruce↗

Moessbauer Mineralogy on the Moon: The Lunar Regolith

A first-order requirement for spacecraft missions that land on solid planetary objects is instrumentation for mineralogical analyses. For purposes of providing diagnostic information about naturally-occurring materials, the element iron is particularly important because it is abundant and multivalent. Knowledge of the oxidation state of iron and its distribution among iron-bearing mineralogies tightly constrains the types of materials present and provides information about formation and modification (weathering) processes. Because Moessbauer spectroscopy is sensitive to both the valence of iron and its local chemical environment, the technique is unique in providing information about both the relative abundance of iron-bearing phases and oxidation state of the iron. The Moessbauer mineralogy of lunar regolith samples (primarily soils from the Apollo 16 and 17 missions to the Moon) were measured in the laboratory to demonstrate the strength of the technique for in situ mineralogical exploration of the Moon. The regolith samples were modeled as mixtures of five iron-bearing phases: olivine, pyroxene, glass, ilmenite, and metal. Based on differences in relative proportions of iron associated with these phases, volcanic ash regolith can be distinguished from impact-derived regolith, impact-derived soils of different geologic affinity (e.g., highlands, maria) can be distinguished on the basis of their constituent minerals, and soil maturity can be estimated. The total resonant absorption area of the Moessbauer spectrum can be used to estimate total FeO concentrations.

Morris, Richard V.↗

Compositional Variation in Lunar Regolith Samples: Vertical

Some techniques for measuring composition and mineralogy remotely detect only the upper few micrometers to millimeters of material. Is this a serious concern for lunar regolith studies? Here it is shown the centimeter-scale variation with depth in the composition of lunar regolith based on results of the studies of regolith cores taken on the Apollo missions. In short, the compositional variation of lunar regolith with depth over tens of centimeters is equivalent to that observed laterally at the surface over kilometers. On average, however, the composition of material in the upper half centimeter is probably reasonably representative of the upper half meter or more (the depth of most Apollo cores), particularly for measurements made from orbit that integrate over a large surface area.

Korotev, Randy L.↗

A New Method for Estimating the Single Scattering Phase Functions of Regolith Grains

Hapke's photometric model has been widely used in solar system remote sensing applications for nearly two decades. Recently, Hapke extended his model to describe the coherent-backscatter opposition effect and multiple-scattering by particles with anisotropic single particle phase functions (SPPF's). A practical difficulty for retrieving Hapke's model parameters from typical planet, satellite, and asteroid photometry data sets is that the model employs a large number of adjustable parameters (at least eight) that can be reliably constrained only for a small number of planetary data sets in which both disk-resolved and whole-disk observations are available from opposition to very large phase angles. The present work aims to reduce the number of adjustable parameters and preserve (or even enhance) the model's accuracy and usefulness by expressing Hapke's parameters in terms of more fundamental physical properties on which they mutually depend. The most difficult part of this task, described here, is to develop a simple method for computing the effective SPPF for structurally complex regolith grains from optical constants, grain-size distribution, and average regolith porosity. The development of light-scattering models for irregularly shaped particles is a large, complex subject and many sophisticated methods, such as Discrete Dipole Approximation (DDA) and Monte-Carlo simulations, have been explored elsewhere. Many of these methods are computationally intensive and probably impractical for routine substitution in Hapke's model. Here, progress is reported in developing a practical, semi-empirical method for estimating the directional scattering behavior (i.e. SPPF) of irregular regolith grains. The method employs Optical Transfer Function (OTF) techniques to model how the structural complexity of regolith particles broaden and attenuate the angular distribution of scattered light relative to that expected from ideal spherical particles of equivalent size and composition.

Helfenstein, P.↗

Making a Regolith Breccia

Regolith breccias are created when regolith is fused together by shock from nearby impacts. Some of these breccias are so friable that they crumble easily back into the soils from which they formed. Others are compacted enough to survive being launched off a parent body and landing on Earth, as evidenced by our collection of regolith breccia meteorites from both the moon and the asteroids. By comparing and contrasting de-lithified soils to their regolith counterparts, insight can be gained into the breccia forming process.

Noble, S. K.↗

Generation of an Ordinary-Chondrite 'Regolith' by Repetitive Impact

Analyses of meteorites and remote sensing studies for years have suggested the presence of regolith on asteroids, yet detailed observations of asteroid regoliths have been possible only recently with the flybys of 951 Gaspra, 243 Ida, and 253 Mathilde, and with the orbiting of and landing on 433 Eros by the NEAR Shoemaker spacecraft. Virtually all investigations into the generation and evolution of asteroid regoliths to date have been theoretical in nature. These have been guided mainly by observations of the lunar regolith, using what meager experimental data exist for terrestrial materials as substitutes for their asteroidal counterparts. As part of a program to evaluate the behavior of an ordinary chondrite under impact conditions, about 460 g of the L6 chondrite ALH85017 were subjected to 50 consecutive impacts, sufficient to reduce the target from a mean grain size of 11 mm to 0.5 mm. Some of the details of these experiments are presented here.

Cintala, M. J.↗

A Thorium-rich Mare Basalt Rock Fragment from the Apollo 12 Regolith: A Sample from a Young Procellarum Flow?

In this abstract, we report on the composition, mineralogy and petrography of a basaltic rock fragment, 12032,366-18, found in the Apollo 12 regolith. Age data, collected as part of an investigation by Barra et al., will be presented in detail in. Here, only the age dating result is summarized. This rock fragment garnered our attention because it is significantly enriched in incompatible elements, e.g., 7 ppm thorium, compared to other known lunar basalts. Its mineral- and trace-element chemistry set it apart from other Apollo 12 basalts and indeed from all Apollo and Luna basalts. What makes it potentially very significant is the possibility that it is a sample of a relatively young, thorium-rich basalt flow similar to those inferred to occur in the Procellarum region, especially northwestern Procellarum, on the basis of Lunar Prospector orbital data. Exploiting the lunar regolith for the diversity of rock types that have been delivered to a landing site by impact processes and correlating them to their likely site of origin using remote sensing will be an important part of future missions to the Moon. One such mission is Moonrise, which would collect regolith samples from the South Pole-Aitken Basin, concentrating thousands of rock fragments of 3-20 mm size from the regolith, and returning the samples to Earth.

Jolliff, B. L.↗

DEVELOPMENT OF STANDARDIZED LUNAR REGOLITH SIMULANT MATERIALS

Lunar exploration activities require scientific and engineering studies that use standardized testing procedures and ultimately support flight certification of hardware and the development of technologies for their use on the lunar surface. It is necessary to anticipate the full range of source materials and environmental constraints that are expected on the Moon and Mars, and to evaluate in-situ resource utilization (ISRU) coupled with testing and development. Historical use of lunar simulants has focused on physical aspects of the lunar regolith for landing and transportation activities. Lunar mare simulants MLS-1 and JSC-1 have been developed, but supplies have been exhausted. Renewed emphasis on exploration and ISRU activities requires development of standardized simulant reference materials that are traceable interlaboratory standards for testing and simulate the lunar regolith in terms of physical, chemical, and mineralogical properties. This new generation of lunar regolith simulants must therefore support both technological development and testing methods. These issues were extensively discussed at the 2005 Lunar Regolith Simulant Materials Workshop.

Carpenter, P.↗

Development of Standardized Lunar Regolith Simulant Materials

Lunar exploration requires scientific and engineering studies using standardized testing procedures that ultimately support flight certification of technologies and hardware. It is necessary to anticipate the range of source materials and environmental constraints that are expected on the Moon and Mars, and to evaluate in-situ resource utilization (ISRU) coupled with testing and development. Physical properties of the regolith dominate processes such as excavation and drilling, while chemical properties dominate processes such as elemental extraction. We describe here the development of standardized lunar regolith simulant (SLRS) materials that are traceable interlaboratory standards for testing and technology development. These SLRS materials must simulate the lunar regolith in terms of physical, chemical, and mineralogical properties. A comprehensive simulant development program has been outlined and is in progress. A summary of these issues is contained in the 2005 Workshop on Lunar Regolith Simulant Materials

Carpenter, P.↗

Development of Standardized Lunar Regolith Simulant Materials

Lunar exploration requires studies using standardized testing procedures. Previous lunar simulants focused on physical aspects of the lunar regolith. Renewed lunar exploration requires standardized lunar regolith simulant (SLRS) materials that simulate the physical, chemical, and mineralogical properties of the regolith [l]. A root simulant models an end-member, and a derivative is formed by addition of material [2]. The 2005 Workshop recommended a low-Ti mare basalt and a high-Ca highland anorthosite set of roots. Derivatives involve addition of ilmenite and glassy agglutinates [3]. An ideal SLRS material is homogeneous. Geochemical standards are finely-ground to reduce chemical variability, but lunar simulants have a grain size variation and mineralogy that must match the lunar regolith. The simulant homogeneity is monitored using major, minor, and trace element data of progressively smaller samples compared to bulk material. Both chemical and geotechnical properties depend on the contrast from grain to grain. The variability of simulant material is an inherent property that must be taken into account. Simulant production requires monitoring of adherence to simulant requirements and homogeneity during production. Quality control establishes a traceability to a master set of reference standards.

Carpenter, P.↗

A One-Piece Lunar Regolith-Bag Garage Prototype

Shelter structures on the moon, even in early phases of exploration, should incorporate lunar materials as much as possible. We designed and constructed a prototype for a one-piece regolith-bag unpressurized garage concept, and, in parallel, we conducted a materials testing program to investigate six candidate fabrics to learn how they might perform in the lunar environment. In our concept, a lightweight fabric form is launched from Earth to be landed on the lunar surface and robotically filled with raw lunar regolith. In the materials testing program, regolith-bag fabric candidates included: VectranTM, NextelTM, Gore PTFE FabricTM, ZylonTM TwaronTM and NomexTM. Tensile (including post radiation exposure), fold, abrasion, and hypervelocity impact testing were performed under ambient conditions, and, within our current means, we also performed these tests under cold and elevated temperatures. In some cases, lunar simulant (JSC-1) was used in conjunction with testing. Our ambition is to continuously refine our testing to reach lunar environmental conditions to the extent possible. A series of preliminary structures were constructed during design of the final prototype. Design is based on the principles of the classic masonry arch. The prototype was constructed of KevlarTM and filled with vermiculite (fairly close to the weight of lunar regolith on the moon). The structure is free-standing, but has not yet been load tested. Our plan for the future would be to construct higher fidelty mockups with each iteration, and to conduct appropriate tests of the structure.

Smithers, Gweneth A.↗

A One-Piece Lunar Regolith-Bag Garage Prototype

Shelter structures on the moon, even in early phases of exploration, should incorporate lunar materials as much as possible. We designed and constructed a prototype for a one-piece regolith-bag unpressurized garage concept, and, in parallel, we conducted a materials testing program to investigate six candidate fabrics to learn how they might perform in the lunar environment. In our concept, a lightweight fabric form is launched from Earth to be landed on the lunar surface and robotically filled with raw lunar regolith. In the materials testing program, regolith-bag fabric candidates included: Vectran(TM), Nextel(TM), Gore PTFE Fabric(TM), Zylon(TM), Twaron(TM), and Nomex(TM). Tensile (including post radiation exposure), fold, abrasion, and hypervelocity impact testing were performed under ambient conditions, and, within our current means, we also performed these tests under cold and elevated temperatures. In some cases, lunar simulant (JSC-1) was used in conjunction with testing. Our ambition is to continuously refine our testing to reach lunar environmental conditions to the extent possible. A series of preliminary structures were constructed during design of the final prototype. Design is based on the principles of the classic masonry arch. The prototype was constructed of Kevlar(TM) and filled with vermiculite (fairly close to the weight of lunar regolith on the moon). The structure is free-standing, but has not yet been load tested. Our plan for the future would be to construct higher fidelity mockups with each iteration, and to conduct appropriate tests of the structure.

Smithers, Gweneth A.↗