Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radiality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Radial and latitudinal gradients in the solar internal angular velocity

The frequency splittings of intermediate-degree (3 to 170 deg) p-mode oscillations obtained from a 16-day subset of observations were analyzed. Results show evidence for both radial and latitudinal gradients in the solar internal angular velocity. From 0.6 to 0.95 solar radii, the solar internal angular velocity increases systematically from 440 to 463 nHz, corresponding to a positive radial gradient of 66 nHz/solar radius for that portion of the solar interior. Analysis also indicates that the latitudinal differential rotation gradient which is seen at the solar surface persists throughout the convection zone, although there are indications that the differential rotation might disappear entirely below the base of the convection zone. The analysis was extended to include comparisons with additional observational studies and between earlier results and the results of additional inversions of several of the observational datasets. All the comparisons reinforce conclusions regarding the existence of radial and latitudinal gradients in the internal angular velocity.

Rhodes, Edward J., Jr.↗
NASA NTRS1988

Confirmation of radial velocity variability in Arcturus

The paper presents results of high-precision measurements of radial-velocity variations in Alpha Boo. Significant radial-velocity variability is detected well in excess of the random and systematic measurement errors. The radial velocity varies by an amount greater than 200 m/sec with a period of around 2 days.

Cochran, William D.↗
NASA NTRS1988

Solar cycle dependence of the radial gradient of cosmic ray intensity

Observation of the interplanetary intensity of cosmic rays (Ep greater than 80 MeV) by Pioneers 10 and 11 now spans a 16-year time period 1972-1988 and heliocentric radial distances, out to 43.7 AU for Pioneer 10 and 25.8 AU for Pioneer 11. Solar modulation continues to be present at the current distances of both spacecraft. The radial gradient of intensity is measured continuously over the slowly varying, outward moving radial segment r10-r11. The 50-day mean values of the gradient G vary systematically and cyclically in phase with solar activity as measured by sunspot number, with a maximum value of about 2.1 percent/AU at sunspot maximum and a minimum value of about 1.2 percent/AU at sunspot minimum.

Van Allen, James A.↗
NASA NTRS1988

The regimes of the east-west and the radial anisotropies of cosmic rays in the heliosphere

Observations dating back to 1957 are used to show that there are two distinct physical states of the heliosphere. From 1957-1970 the diurnal anisotropy consisted of the azimuthal component only. This period is defined as the regime of the east-west anisotropy. The period 1971-1979 is characterized by the appearance of a radial anisotropy which attained a maximum amplitude in 1976, when the solar activity was minimum. It is suggested that there is an inverse correlation between the amplitude of the radial anisotropy and solar activity. The physical state of the heliosphere is very stable during the regime of east-west anisotropy and extremely dynamic during the radial anisotropy regime. It is suggested that the heliosphere switches from one physical state to another following the onset of the solar polar field reversal.

Ahluwalia, H. S.↗
NASA NTRS1990

Radial Cracks Would Signal Wearout Of Turbine Blades

Nonfatal defects made to appear before fatal ones. Proposed to design turbine blades to crack radially before they crack chordwise. Advance radial cracking promoted in design by adjusting thermal stresses and net bending stresses. Prior appearance of radial crack or cracks in used blade serves as warning that more-threatening chordwise crack or cracks may subsequently appear. Blade replaced before it fails.

Paulus, Donald E.↗
NASA NTRS1989

Radial diffusion in the Uranian radiatian belts - Inferences from satellite absorption loss models

Low-energy charged particle (LECP) phase space density profiles available from the Voyager/1986 Uranus encounter are analyzed, using solutions of the time-averaged radial diffusion equation for charged particle transport in a dipolar planetary magnetic field. Profiles for lower-energy protons and electrons are first analyzed to infer radial diffusion rate as a function of L, assuming that satellite absorption is the dominant loss process and local sources for these particles are negligible. Satellite macrosignatures present in the experimentally derived profiles are approximately reproduced in several cases, lending credence to the loss model and indicating that magnetospheric distributed losses are not as rapid as satellite absorption near the minimum satellite L shells for the particles. Diffusion rates and L dependences are found to be similar to those previously inferred in the inner Jovian magnetosphere (Thomsen et al., 1977) and for the inner Saturnian magnetosphere (Hood, 1985). Profiles for higher energy electrons and protons are also analyzed using solutions that allow for the existence of significant particle sources as well as sinks. Possible implications for radial diffusion mechanisms in the Uranian radiation belts are discussed.

Hood, L. L.↗
NASA NTRS1990

A possible case of radially antisunward propagating substorm onset in the near-earth magnetotail

It is generally thought that the local effects associated with substorm onset in the near-earth magnetotail (R less than about 10 earth radii) have a component of propagation which is radially earthward. This study presents a case during which it is possible that the local effects of substorm onset propagated radially antisunward, examining energetic-ion and magnetic-field data from AMPTE/CCE and energetic-particle data from the GEO satellite 1982-019 during a period of weak substorm activity on June 11, 1985. Although the effects of this event on the ground were very weak, the substorm had a dramatic effect on at least one portion of the near-earth magnetotail. During the period the spacecraft were in an unusually close radial alignment. The data show that phenomena associated with the local effects of substorm onset began at or near GEO before they were observed at CCE. This event is best explained by a near-earth disruption of the cross-tail current sheet and the consequent formation of a substorm current wedge, with a component of expansion antisunward down the tail.

Lopez, R. E.↗
NASA NTRS1989

One-dimensional analysis of plane and radial thin film flows including solid-body rotation

The flow of a thin liquid film with a free surface along a horizontal plate which emanates from a pressurized vessel is examined by integrating the equations of motion across the thin liquid layer and discretizing the integrated equations using finite difference techniques. The effects of 0-g and solid-body rotation will be discussed. The two cases of interest are plane flow and radial flow. In plane flow, the liquid is considered to be flowing along a channel with no change in the width of the channel, whereas in radial flow the liquid spreads out radially over a disk, so that the area changes along the radius. It is desired to determine the height of the liquid film at any location along the plate of disk, so that the heat transfer from the plate or disk can be found. The possibility that the flow could encounter a hydraulic jump is accounted for.

Thomas, S.↗
NASA NTRS1990

A comparison of the radial distribution of molecular gas and non-thermal radio continuum in spiral disks

The present study includes 65 spiral galaxies selected from the Five College Radio Astronomy Observatory (FCRAO) Extragalactic CO Survey for which the major axis distributions of CO emission and 1.49 GHz radio continuum emission are well determined. The radial distribution of the CO emission has been measured with the FCRAO at positions along the major axis that are spaced by one half power beam width (HPBW) (45 seconds). The radial profile of the 1.49 GHz radio continuum emission was constructed by determining the radio emission at the location of the CO measurements from the 1.49 GHz maps of Condon (1987). Large, greater than a factor of ten, radially decreasing gradients in the star formation efficiency are observed for a small percentage, approx. 10 percent, of the spirals in this sample. The majority of spirals, however, are associated with small gradients in the star formation efficiency that do not systematically increase or decrease with radius. That the star formation efficiency does not systematically decrease with radius tends to argue against a global dynamical mechanism, such as a spiral density wave, for being the dominant mechanism triggering disk star formation for the majority of spirals in this sample. The results tend to support the view that the star formation in spiral disks is dominated by a local process that depends more on the molecular cloud properties than the dynamical structure of a galaxy.

Devereux, Nicholas A.↗
NASA NTRS1991

Comparison of a quasi-3D analysis and experimental performance for three compact radial turbines

An experimental aerodynamic evaluation of three compact radial turbine builds was performed. Two rotors which were 40 to 50 percent shorter in axial length than conventional state of the art radial rotors were tested. A single nozzle design was used. One rotor was tested with the nozzle at two stagger angle settings. A second rotor was tested with the nozzle in only the closed down setting. Experimental results were compared to predict results from a quasi-3D inviscid and boundary layer analysis, called Meridl/Tsonic/Blayer (MTSB). This analysis was used to predict turbine performance. It has previously been calibrated only for axial, not radial, turbomachinery. The predicted and measured efficiencies were compared at the design point for the three turbines. At the design points the analysis overpredicted the efficiency by less than 1.7 points. Comparisons were also made at off-design operating points. The results of these comparisons showed the importance of an accurate clearance model for efficiency predictions and also that there are deficiencies in the incidence loss model used.

Simonyi, P. S.↗
NASA NTRS1991

Design and experimental evaluation of compact radial-inflow turbines

The application of a multistage 3D Euler solver to the aerodynamic design of two compact radial-inflow turbines is presented, along with experimental results evaluating and validating the designs. The objectives of the program were to design, fabricate, and rig test compact radial-inflow turbines with equal or better efficiency relative to conventional designs, while having 40 percent less rotor length than current traditionally-sized radial turbines. The approach to achieving these objectives was to apply a calibrated 3D multistage Euler code to accurately predict and control the high rotor flow passage velocities and high aerodynamic loadings resulting from the reduction in rotor length. A comparison of the advanced compact designs to current state-of-the-art configurations is presented.

Fredmonski, A. J.↗
NASA NTRS1991

Comparison of a quasi-3D analysis and experimental performance for three compact radial turbines

An experimental aerodynamic evaluation of three compact radial turbine builds was performed. Two rotors which were 40-50 percent shorter in axial length than conventional state-of-the-art radial rotors were tested. A single nozzle design was used. One rotor was tested with the nozzle at two stagger angle settings. A second rotor was tested with the nozzle in only the closed down setting. Experimental results were compared to predicted results from a quasi-3D inviscid and boundary layer analysis, called MTSB (Meridl/Tsonic/Blayer). This analysis was used to predict turbine performance. It has previously been calibrated only for axial, not radial, turbomachinery. The predicted and measured efficiencies were compared at the design point for the three turbines. At the design points the analysis overpredicted the efficiency by less than 1.7 points. Comparisons were also made at off-design operating points. The results of these comparisons showed the importance of an accurate clearance model for efficiency predictions and also that there are deficiencies in the incidence loss model used.

Simonyi, P. S.↗
NASA NTRS1991

An observation of a heliospheric magnetic cycle dependence for the integral radial gradient of E above 60 MeV cosmic rays

The dependence of the integral radial gradient of the cosmic radiation upon the cosmic ray intensity level and heliocentric radial distance is investigated. The magnitude of the integral radial gradient (IRG) from 1982-1990, during a period of negative polarity, is a strong function of the cosmic ray intensity changing from about 1.5 percent/AU at the time of the peak intensity in 1987 to about 3 percent/AU at times of minimum intensity in 1982 and 1990. In the early period studied from 1977 to 1982, during a period of positive polarity, practically no dependence of the magnitude of the IRG on the cosmic ray intensity was found. The gradient remained at about 3 percent/AU during the entire period. It is argued that these specific changes in the behavior of the gradient in opposite polarity cycles are not predicted by either the drift-wavy current sheet or simple diffusion-convection models of the solar modulation. The results are discussed in the context of the present understanding of the causes of the asymmetry in the 11-year modulation cycles.

Webber, W. R.↗
NASA NTRS1992

Hollow Cathode With Multiple Radial Orifices

Improved hollow cathode serving as source of electrons has multiple radial orifices instead of single axial orifice. Distributes ion current more smoothly, over larger area. Prototype of high-current cathodes for ion engines in spacecraft. On Earth, cathodes used in large-diameter ion sources for industrial processing of materials. Radial orientation of orifices in new design causes current to be dispersed radially in vicinity of cathode. Advantageous where desireable to produce plasma more nearly uniform over wider region around cathode.

Brophy, John R.↗
NASA NTRS1991

A viscous flow study of shock-boundary layer interaction, radial transport, and wake development in a transonic compressor

A numerical study based on the 3D Reynolds-averaged Navier-Stokes equation has been conducted to investigate the detailed flow physics inside a transonic compressor. 3D shock structure, shock-boundary layer interaction, flow separation, radial mixing, and wake development are all investigated at design and off-design conditions. Experimental data based on laser anemometer measurements are used to assess the overall quality of the numerical solution. An additional experimental study to investigate end-wall flow with a hot-film was conducted, and these results are compared with the numerical results. Detailed comparison with experimental data indicates that the overall features of the 3D shock structure, the shock-boundary layer interaction, and the wake development are all calculated very well in the numerical solution. The numerical results are further analyzed to examine the radial mixing phenomena in the transonic compressor. A thin sheet of particles is injected in the numerical solution upstream of the compressor. The movement of particles is traced with a 3D plotting package. This numerical survey of tracer concentration reveals the fundamental mechanisms of radial transport in this transonic compressor.

Hah, Chunill↗
NASA NTRS1991

The radial-azimuthal stability of accretion disks - Gas pressure contributions

A radial-azimuthal stability analysis of a thin, alpha disk accretion flow is presented. The proportion of radiation pressure, Pr, of the unperturbed flow is allowed to vary according to the parameter beta = Pr/P, where P is the total pressure. As is the case for a purely radial analysis, the disk is stable for beta equal to or less than 0.6. However, the coupling of radial and azimuthal perturbations eliminates the viscous instability for such nonradial modes for all values of beta. The group velocity of the retrograde thermal mode is calculated as a function of beta.

Mckee, M. R.↗
NASA NTRS1991

Pressure anisotropy and radial stress balance in the Jovian neutral sheet

By examining particle and magnetic field data from the Voyager 1 and 2 spacecraft, signatures were found indicating that the (greater than about 28 keV) particle pressure parallel to the magnetic field is greater than the pressure perpendicular to the field within the nightside neutral sheet (three nightside neutral sheet crossings, with favorable experimental conditions, were used). By incorporating the pressure anisotropy into the calculation of radial forces within the hightside neutral sheet, it is found that (1) force balance is approximately achieved and (2) the anisotropy force term provides the largest contribution of the other particle forces considered (pressure gradients and the corotation centrifugal force). With regard to the problem of understanding the balance of radial forces within the dayside neutral sheet (McNutt, 1984; Mauk and Krimigis, 1987), the nightside pressure anisotropy force is larger than the dayside pressure gradient forces at equivalent radial distances; however, a full accounting of the dayside regions remains to be achieved.

Paranicas, C. P.↗
NASA NTRS1993

Stirling Engine With Radial Flow Heat Exchangers

Conflict between thermodynamical and structural requirements resolved. In Stirling engine of new cylindrical configuration, regenerator and acceptor and rejector heat exchangers channel flow of working gas in radial direction. Isotherms in regenerator ideally concentric cylinders, and gradient of temperature across regenerator radial rather than axial. Acceptor and rejector heat exchangers located radially inward and outward of regenerator, respectively. Enables substantial increase in power of engine without corresponding increase in diameter of pressure vessel.

Vitale, N.↗