Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Magneto-transport study on Sn-rich Sn 1–x Ge x thin films enabled by CdTe buffer layer

α-Sn, generally known as gray tin, has attracted significant scientific interest due to its potential to host novel topological phases. Studying the transport properties of α-Sn thin films grown on the InSb substrate has been challenging, as the InSb substrate also significantly contributes to the transport properties. In this article, we report a novel approach to epitaxially grow α-Sn thin films on an InSb substrate with a resistive buffer layer of CdTe. Thin films of α–Sn 1–x Ge x (x = 0, 0.025) alloy of 15 nm thickness have been grown using molecular beam epitaxy. The high quality of the samples has been determined through high-resolution x-ray diffraction. The CdTe buffer layer has high resistance and acts as an insulating virtual substrate, which significantly suppresses contribution from InSb. Magnetotransport measurements show clear Shubnikov–de Hass oscillations in α–Sn 1–x Ge x (x = 0, 0.025) thin films. A change in oscillation frequency is observed upon alloying with Ge, implying a modification in the electronic structure and demonstrating the effectiveness of the CdTe buffer layer approach. Furthermore, this work provides a new approach that enables the electronic transport characterization of the α–Sn 1–x Ge x alloy system, which enables the study of the topological quantum states using electronic transport and their device applications.

36 MATERIALS SCIENCE↗

Heterointegration of InGaAs/GaAs quantum wells on micro-patterned Si substrates

InGaAs/GaAs quantum wells (QWs) grown on μ-patterned Ge/Si substrates by metal organic vapor phase epitaxy are investigated by electron microscopy and spatially resolved photoluminescence (PL) spectroscopy. The lattice parameter mismatch of GaAs and Si is overcome by a Ge buffer layer grown by low-energy plasma enhanced chemical vapor deposition. The GaAs crystals form truncated pyramids whose shape is strongly affected by the geometry of the underlying pattern consisting of 8 μm deep and 3–50 μm wide square Si pillars. Comparing the measured PL energies with calculations performed in the effective mass approximation reveals that the QW emission energies are significantly influenced by the GaAs morphology. It is shown that the geometry favors indium diffusion during growth from the inclined facets towards the top (001) facet. The Si pillar-size dependent release of thermally induced strain observed in the PL measurements is confirmed by X-ray diffraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum dot-based microfluidic biosensor for cancer detection

We report results of the studies relating to fabrication of an impedimetric microfluidic–based nucleic acid sensor for quantification of DNA sequences specific to chronic myelogenous leukemia (CML). The sensor chip is prepared by patterning an indium–tin–oxide (ITO) coated glass substrate via wet chemical etching method followed by sealing with polydimethylsiloxane (PDMS) microchannel for fluid control. The fabricated microfluidic chip comprising of a patterned ITO substrate is modified by depositing cadmium selenide quantum dots (QCdSe) via Langmuir–Blodgett technique. Further, the QCdSe surface has been functionalized with specific DNA probe for CML detection. The probe DNA functionalized QCdSe integrated miniaturized system has been used to monitor target complementary DNA concentration by measuring the interfacial charge transfer resistance via hybridization. The presence of complementary DNA in buffer solution significantly results in decreased electro-conductivity of the interface due to presence of a charge barrier for transport of the redox probe ions. The microfluidic DNA biosensor exhibits improved linearity in the concentration range of 10{sup −15} M to 10{sup −11} M.

60 APPLIED LIFE SCIENCES↗

Implementation of all-optical active low/high tri-state buffer logic using the micro-ring resonator structures

Implementation of high-speed switching activity in the all-optical domain is one of the required necessities for modern high-speed technology and secured communication. The paper includes the interesting method describing micro-ring resonator structures as switching logic, exploring it to implement the active low tri-state buffer in the all-optical domain structures. The paper shows the switching activity of micro-ring resonator structures along with the corresponding graphs are discussed, including what happens when enabling the effective active high/low all optical tri-state buffer logic functionality. The application and advantage of tri-state buffer logic in the all-optical domain are explained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral shape of a signal in light-induced diffusive pulling (pushing) of particles into a light beam

We study theoretically how the dependences of transport collision frequencies ν{sub i}, collision broadening γ and collision shift Δ of the levels on the velocity v of resonant particles influence lightinduced diffusive pulling (pushing) (LDP) effects in the framework of a generalised model of strong collisions in the case of velocitydependent collision rates (so-called kangaroo model). It is found that allowance for the dependences ν{sub i}(v), γ(v) and Δ(v) does not change the spectral shape of an LDP signal. In particular, in the case of low-intensity radiation, the spectral dependence of the LDP signal coincides with the absorption line shape. It is shown that the magnitude of the LDP effect is proportional to the difference between the diffusion coefficients of particles in the excited and ground states. It is found that the spectral anomalies previously predicted in the LDP effect [Gel'mukhanov F.Kh. JETP Lett., 55, 214 (1992)] for an idealised model of the Lorentz gas (the limiting case of heavy buffer particles), which arise due to the dependences ν{sub i}(v), γ(v) and Δ(v), are typical only for this gas. At a realistic ratio of the masses of absorbing and buffer particles, spectral anomalies do not occur in the LDP effect. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopy on the A 1 Π←X 1 Σ + Transition of Buffer-Gas Cooled AlCl

Aluminum monochloride (AlCl) has been proposed as an excellent candidate for laser cooling. Here we present absorption spectroscopy measurements on the A 1 Π←X 1 Σ + transition in AlCl inside a cryogenic helium buffer-gas beam cell. The high resolution absorption data enables a rigorous, quantitative comparison with our high-level ab initio calculations of the electronic and rovibronic energies, providing a comprehensive picture of the AlCl quantum structure. Further, the combination of high resolution spectral data and theory permits the evaluation of spectroscopic constants and associated properties, like equilibrium bond length, with an order of magnitude higher precision. Based on the measured molecular equilibrium constants of the A 1 Π state, we estimate a Franck-Condon factor of the A 1 Π←X 1 Σ + of 99.88%, which confirms that AlCl is amenable to laser cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface states of strained thin films of the Dirac semimetal Cd 3 As 2

Herein we report on the growth and transport properties of strained thin films of the three-dimensional Dirac semimetal Cd 3 As 2 . Epitaxial heterostructures, consisting of (112)-oriented Cd 3 As 2 films, are grown on nearly lattice matched ( Ga 1 - x In x ) Sb buffer layers on (111) GaAs substrates by molecular beam epitaxy. The epitaxial coherency strain breaks the fourfold rotational symmetry, which protects the bulk Dirac nodes in Cd 3 As 2 . All strained films exhibit the quantum Hall effect with most carriers residing in the two-dimensional states, irrespective of the sign of the biaxial stress. The Hall mobility monotonically increases as the biaxial stress is changed from compressive towards tensile. Furthermore, pronounced anisotropy is seen in the transport properties. The results show that the quantum Hall effect, which is quite similar to that of unstrained (112)-oriented films, is independent of the presence of bulk Dirac nodes. Its appearance is consistent with the topological surface states that are a characteristic of the topological Z 2 invariant.

36 MATERIALS SCIENCE↗

Coexistence of type-I and type-II band alignments in antimony-incorporated InAsSb quantum dot nanostructures

Antimony-incorporated InAsSb quantum dots (QDs) are grown by molecular beam epitaxy on GaAs(001) substrates. The QD density increases {approx}7 times while the QD height decreases {approx}50% due to the increase of QD nucleation sites after Sb incorporation into the GaAs buffer layer and into the InAs QDs. These Sb-incorporated InAsSb QDs show red-shift in the photoluminescence (PL) spectrum and large energy separation between confined energy levels. More interestingly, besides the typical type-I QD transition, an additional peak from the recombination at wetting layer interface develops as the excitation laser intensity increases. This peak clearly exhibits type-II characteristics from the measurement of a large blue-shift of the PL peak and a long PL decay time. Finally, the mechanism of the coexistence of type-I and type-II band alignments is discussed.

36 MATERIALS SCIENCE↗

Localized growth of InAs quantum dots on nanopatterned InP(001) substrates

We present the method of site-controlled growth of InAs quantum dots on InP(001) by solid-source molecular beam epitaxy. InAs dots are positioned using nanopatterns realized by electron beam lithography and dry etching. We have obtained the localized InAs dots for InAs deposit thickness inferior to the critical thickness for the two-dimensional/three-dimensional growth mode transition measured on a flat InP surface, implying that the dots can be actively positioned at predefined nucleation sites. Photoluminescence results show the emission of localized InAs dots on patterns overgrown with a thin InP buffer layer, at a wavelength around 1.5 {mu}m at room temperature.

36 MATERIALS SCIENCE↗

Enhancement of short-circuit current density in polymer bulk heterojunction solar cells comprising plasmonic silver nanowires

We demonstrate that the influence of plasmonic effects based on silver nanowires (Ag NWs) on the characteristics of polymer solar cells (PSCs). The solution-processed Ag NWs are situated at the interface of anode buffer layer and active layer, which could enhance the performance especially the photocurrent of PSCs by scattering, localized surface plasmon resonance, and surface plasmon polaritons. Plasmonic effects are confirmed by the enhancement of extinction spectra, external quantum efficiency, and steady state photoluminescence. Consequently, the short-circuit current density (J{sub sc}) and power conversion efficiency enhance about 24% and 18%, respectively, under AM1.5 illumination when Ag NWs plasmonic nanostructure incorporated into PSCs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Slow light with low group-velocity dispersion at the edge of photonic graphene

We theoretically study the light propagation at the zigzag edges of a honeycomb photonic crystal (PC), or photonic graphene. It is found that the corresponding edge states have a sinusoidal dispersion similar to those found in PC coupled resonator optical waveguides [CROWs; M. Notomi et al., Nature Photon. 2, 741 (2008)]. The sinusoidal dispersion curve can be made very flat by carefully tuning edge parameters. As a result, low group velocity and small group velocity dispersion can be simultaneously obtained for light propagating at the zigzag edge of photonic graphene. Compared with PC CROWs, our slow-light system exhibits no intrinsic radiation loss and has a larger group velocity bandwidth product. Our results could find applications in on-chip optical buffers and enhanced light-matter interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computing an Optimal Entanglement Path with Throughput and Fidelity Considerations

Entanglement distribution is a core function of quantum networks essential for operations including teleportation, distributed quantum sensing, and multisite computation. Entanglement throughput and fidelity are two critical performance measures that depend on the quantum transmission along the links and swapping operations at the repeaters along the path. We study the problem of computing a end-to-end entanglement path that satisfies both fidelity and throughput requirements, leveraging qubit buffers at the nodes and considering the sequential swapping order. We show that the general problem of simultaneously satisfying both metrics to be NP-hard, and develop an algorithm to maximize throughput subject to a given fidelity threshold. We introduce the concepts of entanglement probability distribution and path domination and exploit them in the design of our algorithm. Extensive numerical results show that our algorithm can find optimal solutions in networks with thousands of nodes in less than a second. We also describe practical and possible implementation aspects of this algorithm in terms of devices and architecture support.

Xue, Guoliang [Arizona State University]↗

Dislocation gliding and cross-hatch morphology formation in AIII-BV epitaxial heterostructures

An approach for understanding the origin of cross-hatch pattern (CHP) on the surface of lattice mismatched GaMnAs/InGaAs samples grown on GaAs (001) substrates is developed. It is argued that the motion of threading dislocations in the (111) slip planes during the relaxation of InGaAs buffer layer is more complicated process and its features are similar to the ones of dislocation half-loops gliding in plastically deformed crystals. The heterostructures were characterized by atomic force microscopy and electron beam induced current (EBIC). Detailed EBIC experiments revealed contrast features, which cannot be accounted for by the electrical activity of misfit dislocations at the buffer/substrate interface. We attribute these features to specific extended defects (EDs) generated by moving threading dislocations in the partially relaxed InGaAs layers. We believe that the core topology, surface reconstruction, and elastic strains from these EDs accommodated in slip planes play an important role in the CHP formation. The study of such electrically active EDs will allow further understanding of degradation and changes in characteristics of quantum devices based on strained heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast optical transport of ultracold molecules over long distances

Abstract Optically trapped laser-cooled polar molecules hold promise for new science and technology in quantum information and quantum simulation. Large numerical aperture optical access and long trap lifetimes are needed for many studies, but these requirements are challenging to achieve in a magneto-optical trap (MOT) vacuum chamber that is connected to a cryogenic buffer gas beam source, as is the case for all molecule laser cooling experiments so far. Long distance transport of molecules greatly eases fulfilling these requirements as molecules are placed into a region separate from the MOT chamber. We realize a fast transport method for ultracold molecules based on an electronically focus-tunable lens combined with an optical lattice. The high transport speed is achieved by the 1D red-detuned optical lattice, which is generated by interference of a focus-tunable laser beam and a focus-fixed laser beam. Efficiency of 48(8)% is realized in the transport of ultracold calcium monofluoride (CaF) molecules over 46 cm distance in 50 ms, with a moderate heating from 32(2) μ K to 53(4) μ K. Positional stability of the molecular cloud allows for stable loading of an optical tweezer array with single molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Design and Performance of an InAs Quantum Dot Scintillator with Integrated Photodetector

A new scintillation material composed of InAs quantum dots (QDs) hosted within a GaAs matrix was developed, and its performance with different types of radiation is evaluated. A methodology for designing an integrated photodetector (PD) with a low defect density and that is optically matched to the QD’s emission spectrum is introduced, utilizing an engineered epitaxial InAlGaAs metamorphic buffer layer. The photoluminescence (PL) collection efficiency of the integrated PD is examined using two-dimensional scanning laser excitation. The detector response to 5.5 MeV α-particles and 122 keV photons is presented. Yields of 13 electrons/keV for α-particles and 30–60 electrons/keV for photons were observed. The energy resolution of 12% observed with α-particles was mainly limited by noise- and geometry-related optical losses. The radiation hardness of an InAs QDs hosted within GaAs and a wider band gap AlGaAs ternary alloy was studied under a 1 MeV proton implantation up to a 10 14 cm –2 dose. The integrated PL responses were compared to evaluate PL quenching due to non-radiative defects. The QDs embedded in the AlGaAs demonstrated improved radiation hardness compared to QDs in the GaAs matrix and in the InGaAs quantum wells.

36 MATERIALS SCIENCE↗

Carbon doped GaN buffer layer using propane for high electron mobility transistor applications: Growth and device results

The creation of a semi insulating (SI) buffer layer in AlGaN/GaN High Electron Mobility Transistor (HEMT) devices is crucial for preventing a current path beneath the two-dimensional electron gas (2DEG). In this investigation, we evaluate the use of a gaseous carbon gas precursor, propane, for creating a SI GaN buffer layer in a HEMT structure. The carbon doped profile, using propane gas, is a two stepped profile with a high carbon doping (1.5 × 10{sup 18 }cm{sup −3}) epitaxial layer closest to the substrate and a lower doped layer (3 × 10{sup 16 }cm{sup −3}) closest to the 2DEG channel. Secondary Ion Mass Spectrometry measurement shows a uniform incorporation versus depth, and no memory effect from carbon doping can be seen. The high carbon doping (1.5 × 10{sup 18 }cm{sup −3}) does not influence the surface morphology, and a roughness root-mean-square value of 0.43 nm is obtained from Atomic Force Microscopy. High resolution X-ray diffraction measurements show very sharp peaks and no structural degradation can be seen related to the heavy carbon doped layer. HEMTs are fabricated and show an extremely low drain induced barrier lowering value of 0.1 mV/V, demonstrating an excellent buffer isolation. The carbon doped GaN buffer layer using propane gas is compared to samples using carbon from the trimethylgallium molecule, showing equally low leakage currents, demonstrating the capability of growing highly resistive buffer layers using a gaseous carbon source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparator circuits with local ramp buffering for a column-parallel single slope ADC

A comparator circuit suitable for use in a column-parallel single-slope analog-to-digital converter comprises a comparator, an input voltage sampling switch, a sampling capacitor arranged to store a voltage which varies with an input voltage when the sampling switch is closed, and a local ramp buffer arranged to buffer a global voltage ramp applied at an input. The comparator circuit is arranged such that its output toggles when the buffered global voltage ramp exceeds the stored voltage. Both DC- and AC-coupled comparator embodiments are disclosed.

42 ENGINEERING↗

Controlling structural phases of Sn through lattice engineering

Topology and superconductivity, two distinct phenomena, offer unique insight into quantum properties and their applications in quantum technologies, spintronics, and sustainable energy technologies. Tin (Sn) plays a pivotal role here as an element because of its two structural phases, α-Sn exhibiting topological characteristics and β-Sn showing superconductivity. Here, we demonstrate precise control of these phases in Sn thin films using molecular beam epitaxy with systematically varied lattice parameters of the buffer layer. The Sn films exhibit either β-Sn or α-Sn phases as the buffer layer's lattice constant varies from 6.10 Å to 6.48 Å, spanning the range from GaSb (like InAs) to InSb. Further, the crystal structures of α- and β-Sn films are characterized by x-ray diffraction and confirmed by Raman spectroscopy and scanning transmission electron microscopy. Atomic force microscopy validates the smooth, continuous surface morphology. Electrical transport measurements further verify the phases: resistance drop near 3.7 K for β-Sn superconductivity and Shubnikov-de Haas oscillations for α-Sn topological characteristics. Density functional theory shows that α-Sn is stable under tensile strain and β-Sn under compressive strain, aligning well with experimental findings. Hence, this study introduces a platform controlling Sn phases through lattice engineering, enabling innovative applications in quantum technologies and beyond.

36 MATERIALS SCIENCE↗