Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum buffer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Polarization induced doped transistor

A nitride-based field effect transistor (FET) comprises a compositionally graded and polarization induced doped p-layer underlying at least one gate contact and a compositionally graded and doped n-channel underlying a source contact. The n-channel is converted from the p-layer to the n-channel by ion implantation, a buffer underlies the doped p-layer and the n-channel, and a drain underlies the buffer.

36 MATERIALS SCIENCE↗

Low temperature synthesized SrMoO4:Eu3+ nanophosphors functionalized with ethylene glycol: A comparative study of synthesize route, morphology, luminescence and annealing

Highlights: • Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). • For the first time, a comparative study of synthesized route, morphology, luminescence and annealing has been given in detail. • Mechanism involved in the luminescence has been discussed with the help of schematic representation, energy level diagram and chromaticity diagram. • The prepared phosphors are suitable for biological labeling due to their dispersible capacity in different liquids (ethanol, phosphate buffered saline and water). - Abstract: Tetragonal SrMoO{sub 4}:Eu{sup 3+} downconverting phosphors functionalized with ethylene glycol have been synthesized via three different preparation techniques (urea hydrolysis, ammonia hydrolysis and hydrothermal methods). The developed phosphor shows strong red photoluminescence emission via electric dipole {sup 5}D{sub 0} → {sup 7}F{sub 2} transition and other weak transitions ({sup 5}D{sub 1} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 1}, {sup 5}D{sub 0} → {sup 7}F{sub 3} and {sup 5}D{sub 0} → {sup 7}F{sub 4}) by using three excitation wavelengths of 260, 395 and 464 nm. For the first time, a comprehensive discussion have been given for indirect and direct excitation for as-prepared phosphor prepared by the three different techniques. The needle imbedded spherical particles, elliptical shaped particles and orange carpels shaped particles have been obtained from the urea, ammonia and hydrothermal methods, respectively. The calculated quantum yields are found to be 7.5, 6.1 and 9.3% for urea, ammonia and hydrothermal based synthesized phosphors, respectively. The prepared phosphors are suitable for biological labeling due to their dispersible ability in different liquids (ethanol, phosphate buffered saline and water).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thickness Effect of Al-Doped ZnO Window Layer on Damp Heat Stability of CuInGaSe2 Solar Cells: Preprint

We investigated the damp heat (DH) stability of CuInGaSe2 (CIGS) solar cells as a function of thickness of the Al-doped ZnO (AZO) window layer from the 'standard' 0.12 ..mu..m to a modest 0.50 ..mu..m over an underlying 0.10-..mu..m intrinsic ZnO buffer layer. The CIGS cells were prepared with external electrical contact using fine Au wire to the tiny 'standard' Ni/Al (0.05 ..mu..m/3 ..mu..m)metal grid contact pads. Bare cell coupons and sample sets encapsulated in a specially designed, Al-frame test structure with an opening for moisture ingress control using a TPT backsheet were exposed to DH at 85oC and 85% relative humidity, and characterized by current-voltage (I-V), quantum efficiency (QE), and (electrochemical) impedance spectroscopy (ECIS). The results show that bare cellsexhibited rapid degradation within 50-100 h, accompanied by film wrinkling and delamination and corrosion of Mo and AlNi grid, regardless of AZO thickness. In contrast, the encapsulated cells did not show film wrinkling, delamination, and Mo corrosion after 168 h DH exposure; but the trend of efficiency degradation rate showed a weak correlation to the AZO thickness.

14 SOLAR ENERGY↗

Improved Surface Functionalization and Characterization of Membrane-Targeted Semiconductor Voltage Nanosensors

In this work, type-II ZnSe/CdS voltage sensing seeded nanorods (vsNRs) were functionalized with alpha helical peptides and zwitterionic decorated lipoic acids (zw LA). Specific membrane targeting with high loading efficiency and minimal non specific binding was achieved . These vsNRs display quantum yield (QY) modulation as function of membrane potential (MP) changes, as demonstrated at the ensemble level for (i) vesicles treated with valinomycin and (ii) wild type HEK cells under alternating buffers with different [K + ]. ΔF/F of ~ 1% was achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of structural and growth parameters of metamorphic InGaAs photovoltaic converters grown by MOCVD

Metamorphic Ga{sub 0.76}In{sub 0.24}As heterostructures for photovoltaic converters are grown by the MOCVD (metal–organic chemical vapor deposition) technique. It is found that, due to the valence-band offset at the p-In{sub 0.24}Al{sub 0.76}As/p-In{sub 0.24}Ga{sub 0.76}As (wide-gap window/emitter) heterointerface, a potential barrier for holes arises as a result of a low carrier concentration in the wide-gap material. The use of an InAlGaAs solid solution with an Al content lower than 40% makes it possible to raise the hole concentration in the widegap window up ~9 × 10{sup 18} cm{sup –3} and completely remove the potential barrier, thereby reducing the series resistance of the device. The parameters of an GaInAs metamorphic buffer layer with a stepwise In content profile are calculated and its epitaxial growth conditions are optimized, which improves carrier collection from the n-GaInAs base region and provides a quantum efficiency of 83% at a wavelength of 1064 nm. Optimization of the metamorphic heterostructure of the photovoltaic converter results in that its conversion efficiency for laser light with a wavelength of 1064 nm is 38.5%.

36 MATERIALS SCIENCE↗

Transversely diode-pumped alkali metal vapour laser

We have studied theoretically the operation of a transversely diode-pumped alkali metal vapour laser. For the case of high-intensity laser radiation, we have obtained an analytical solution to a complex system of differential equations describing the laser. This solution allows one to exhaustively determine all the energy characteristics of the laser and to find optimal parameters of the working medium and pump radiation (temperature, buffer gas pressure, and intensity and width of the pump spectrum). (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure characterization of MHEMT heterostructure elements with In{sub 0.4}Ga{sub 0.6}As quantum well grown by molecular beam epitaxy on GaAs substrate using reciprocal space mapping

The crystallographic parameters of elements of a metamorphic high-electron-mobility transistor (MHEMT) heterostructure with In{sub 0.4}Ga{sub 0.6}As quantum well are determined using reciprocal space mapping. The heterostructure has been grown by molecular-beam epitaxy (MBE) on the vicinal surface of a GaAs substrate with a deviation angle of 2° from the (001) plane. The structure consists of a metamorphic step-graded buffer (composed of six layers, including an inverse step), a high-temperature buffer of constant composition, and active high-electron-mobility transistor (HEMT) layers. The InAs content in the metamorphic buffer layers varies from 0.1 to 0.48. Reciprocal space mapping has been performed for the 004 and 224 reflections (the latter in glancing exit geometry). Based on map processing, the lateral and vertical lattice parameters of In{sub x}Ga{sub 1–x}As ternary solid solutions of variable composition have been determined. The degree of layer lattice relaxation and the compressive stress are found within the linear elasticity theory. The high-temperature buffer layer of constant composition (on which active MHEMT layers are directly formed) is shown to have the highest (close to 100%) degree of relaxation in comparison with all other heterostructure layers and a minimum compressive stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities of growing InGaAs/GaAs/AlGaAs laser structures by MOCVD on Ge/Si substrates

The growth of InGaAs/GaAs/AlGaAs laser structures by MOCVD at low pressures on Si(001) substrates with a Ge epitaxial metamorphic buffer layer of various thicknesses is studied. The results of the influence of the growth temperature and incorporation of additional AlAs layers at the boundary with the Ge/Si(001) substrate on the crystalline and optical quality of the formed III–V structures are presented. It is shown that the incorporation of the AlAs/GaAs/AlAs lattice at the initial growth stages of III–V heterostructures on Ge buffer layers grown on exact Si(001) substrates makes it possible to considerably decrease the density of threading defects and, consequently, form effectively emitting laser structures. The possibility of growing strained InGaAs quantum wells on Si(001) substrates allowing stimulated radiation in a wavelength region longer than 1100 nm is shown.

36 MATERIALS SCIENCE↗

Collisional population transfer in yterbium ions

Long-lived metastable states of Yb+ ions are used for atomic frequency standards, precision measurements, and quantum information research. The effect of population trapping and transfer in these states must be well understood. We report here the transfer of Yb+ ions into the long-lived {sup 2}F{sub 7/2} state by means of collisions between He buffer gas and Yb+ ions held in a linear Paul trap. Transfer rates were measured as functions of buffer-gas pressure and repump-laser power, and the collisional population transfer rates were extracted. The measured transfer rate coefficients are 8.32(75)x10-11 and 8.65(33)x10-11 cm3/s for the collisional processes {sup 2}P{sub 1/2}{yields}{sup 2}D{sub 5/2} and {sup 2}D{sub 3/2}{yields}{sup 2}F{sub 7/2}, respectively.

74 ATOMIC AND MOLECULAR PHYSICS↗

High sensitivity and high Q-factor nanoslotted parallel quadrabeam photonic crystal cavity for real-time and label-free sensing

We experimentally demonstrate a label-free sensor based on nanoslotted parallel quadrabeam photonic crystal cavity (NPQC). The NPQC possesses both high sensitivity and high Q-factor. We achieved sensitivity (S) of 451 nm/refractive index unit and Q-factor >7000 in water at telecom wavelength range, featuring a sensor figure of merit >2000, an order of magnitude improvement over the previous photonic crystal sensors. In addition, we measured the streptavidin-biotin binding affinity and detected 10 ag/mL concentrated streptavidin in the phosphate buffered saline solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intermixing at the absorber-buffer layer interface in thin-film solar cells: The electronic effects of point defects in Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4} devices

We investigate point defects in the buffer layers CdS and ZnS that may arise from intermixing with Cu(In,Ga)(S,Se){sub 2} (CIGS) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTS) absorber layers in thin-film photovoltaics. Using hybrid functional calculations, we characterize the electrical and optical behavior of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities in the buffer. We find that In and Ga substituted on the cation site act as shallow donors in CdS and tend to enhance the prevailing n-type conductivity at the interface facilitated by Cd incorporation in CIGS, whereas they are deep donors in ZnS and will be less effective dopants. Substitutional In and Ga can favorably form complexes with cation vacancies (A-centers) which may contribute to the “red kink” effect observed in some CIGS-based devices. For CZTS absorbers, we find that Zn and Sn defects substituting on the buffer cation site are electrically inactive in n-type buffers and will not supplement the donor doping at the interface as in CIGS/CdS or ZnS devices. Sn may also preferentially incorporate on the S site as a deep acceptor in n-type ZnS, which suggests possible concerns with absorber-related interfacial compensation in CZTS devices with ZnS-derived buffers. Cu, Na, and K impurities are found to all have the same qualitative behavior, most favorably acting as compensating acceptors when substituting on the cation site. Our results suggest one beneficial role of K and Na incorporation in CIGS or CZTS devices is the partial passivation of vacancy-related centers in CdS and ZnS buffers, rendering them less effective interfacial hole traps and recombination centers.

36 MATERIALS SCIENCE↗

Magneto-transport study on Sn-rich Sn 1–x Ge x thin films enabled by CdTe buffer layer

α-Sn, generally known as gray tin, has attracted significant scientific interest due to its potential to host novel topological phases. Studying the transport properties of α-Sn thin films grown on the InSb substrate has been challenging, as the InSb substrate also significantly contributes to the transport properties. In this article, we report a novel approach to epitaxially grow α-Sn thin films on an InSb substrate with a resistive buffer layer of CdTe. Thin films of α–Sn 1–x Ge x (x = 0, 0.025) alloy of 15 nm thickness have been grown using molecular beam epitaxy. The high quality of the samples has been determined through high-resolution x-ray diffraction. The CdTe buffer layer has high resistance and acts as an insulating virtual substrate, which significantly suppresses contribution from InSb. Magnetotransport measurements show clear Shubnikov–de Hass oscillations in α–Sn 1–x Ge x (x = 0, 0.025) thin films. A change in oscillation frequency is observed upon alloying with Ge, implying a modification in the electronic structure and demonstrating the effectiveness of the CdTe buffer layer approach. Furthermore, this work provides a new approach that enables the electronic transport characterization of the α–Sn 1–x Ge x alloy system, which enables the study of the topological quantum states using electronic transport and their device applications.

36 MATERIALS SCIENCE↗

Heterointegration of InGaAs/GaAs quantum wells on micro-patterned Si substrates

InGaAs/GaAs quantum wells (QWs) grown on μ-patterned Ge/Si substrates by metal organic vapor phase epitaxy are investigated by electron microscopy and spatially resolved photoluminescence (PL) spectroscopy. The lattice parameter mismatch of GaAs and Si is overcome by a Ge buffer layer grown by low-energy plasma enhanced chemical vapor deposition. The GaAs crystals form truncated pyramids whose shape is strongly affected by the geometry of the underlying pattern consisting of 8 μm deep and 3–50 μm wide square Si pillars. Comparing the measured PL energies with calculations performed in the effective mass approximation reveals that the QW emission energies are significantly influenced by the GaAs morphology. It is shown that the geometry favors indium diffusion during growth from the inclined facets towards the top (001) facet. The Si pillar-size dependent release of thermally induced strain observed in the PL measurements is confirmed by X-ray diffraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum dot-based microfluidic biosensor for cancer detection

We report results of the studies relating to fabrication of an impedimetric microfluidic–based nucleic acid sensor for quantification of DNA sequences specific to chronic myelogenous leukemia (CML). The sensor chip is prepared by patterning an indium–tin–oxide (ITO) coated glass substrate via wet chemical etching method followed by sealing with polydimethylsiloxane (PDMS) microchannel for fluid control. The fabricated microfluidic chip comprising of a patterned ITO substrate is modified by depositing cadmium selenide quantum dots (QCdSe) via Langmuir–Blodgett technique. Further, the QCdSe surface has been functionalized with specific DNA probe for CML detection. The probe DNA functionalized QCdSe integrated miniaturized system has been used to monitor target complementary DNA concentration by measuring the interfacial charge transfer resistance via hybridization. The presence of complementary DNA in buffer solution significantly results in decreased electro-conductivity of the interface due to presence of a charge barrier for transport of the redox probe ions. The microfluidic DNA biosensor exhibits improved linearity in the concentration range of 10{sup −15} M to 10{sup −11} M.

60 APPLIED LIFE SCIENCES↗

Implementation of all-optical active low/high tri-state buffer logic using the micro-ring resonator structures

Implementation of high-speed switching activity in the all-optical domain is one of the required necessities for modern high-speed technology and secured communication. The paper includes the interesting method describing micro-ring resonator structures as switching logic, exploring it to implement the active low tri-state buffer in the all-optical domain structures. The paper shows the switching activity of micro-ring resonator structures along with the corresponding graphs are discussed, including what happens when enabling the effective active high/low all optical tri-state buffer logic functionality. The application and advantage of tri-state buffer logic in the all-optical domain are explained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral shape of a signal in light-induced diffusive pulling (pushing) of particles into a light beam

We study theoretically how the dependences of transport collision frequencies ν{sub i}, collision broadening γ and collision shift Δ of the levels on the velocity v of resonant particles influence lightinduced diffusive pulling (pushing) (LDP) effects in the framework of a generalised model of strong collisions in the case of velocitydependent collision rates (so-called kangaroo model). It is found that allowance for the dependences ν{sub i}(v), γ(v) and Δ(v) does not change the spectral shape of an LDP signal. In particular, in the case of low-intensity radiation, the spectral dependence of the LDP signal coincides with the absorption line shape. It is shown that the magnitude of the LDP effect is proportional to the difference between the diffusion coefficients of particles in the excited and ground states. It is found that the spectral anomalies previously predicted in the LDP effect [Gel'mukhanov F.Kh. JETP Lett., 55, 214 (1992)] for an idealised model of the Lorentz gas (the limiting case of heavy buffer particles), which arise due to the dependences ν{sub i}(v), γ(v) and Δ(v), are typical only for this gas. At a realistic ratio of the masses of absorbing and buffer particles, spectral anomalies do not occur in the LDP effect. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectroscopy on the A 1 Π←X 1 Σ + Transition of Buffer-Gas Cooled AlCl

Aluminum monochloride (AlCl) has been proposed as an excellent candidate for laser cooling. Here we present absorption spectroscopy measurements on the A 1 Π←X 1 Σ + transition in AlCl inside a cryogenic helium buffer-gas beam cell. The high resolution absorption data enables a rigorous, quantitative comparison with our high-level ab initio calculations of the electronic and rovibronic energies, providing a comprehensive picture of the AlCl quantum structure. Further, the combination of high resolution spectral data and theory permits the evaluation of spectroscopic constants and associated properties, like equilibrium bond length, with an order of magnitude higher precision. Based on the measured molecular equilibrium constants of the A 1 Π state, we estimate a Franck-Condon factor of the A 1 Π←X 1 Σ + of 99.88%, which confirms that AlCl is amenable to laser cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface states of strained thin films of the Dirac semimetal Cd 3 As 2

Herein we report on the growth and transport properties of strained thin films of the three-dimensional Dirac semimetal Cd 3 As 2 . Epitaxial heterostructures, consisting of (112)-oriented Cd 3 As 2 films, are grown on nearly lattice matched ( Ga 1 - x In x ) Sb buffer layers on (111) GaAs substrates by molecular beam epitaxy. The epitaxial coherency strain breaks the fourfold rotational symmetry, which protects the bulk Dirac nodes in Cd 3 As 2 . All strained films exhibit the quantum Hall effect with most carriers residing in the two-dimensional states, irrespective of the sign of the biaxial stress. The Hall mobility monotonically increases as the biaxial stress is changed from compressive towards tensile. Furthermore, pronounced anisotropy is seen in the transport properties. The results show that the quantum Hall effect, which is quite similar to that of unstrained (112)-oriented films, is independent of the presence of bulk Dirac nodes. Its appearance is consistent with the topological surface states that are a characteristic of the topological Z 2 invariant.

36 MATERIALS SCIENCE↗