Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Modeling Advanced Strippers for CO2 Capture from Gas-Fired Power Plants using Aqueous Piperazine

Energy performance of 5 m piperazine was evaluated with an advanced stripper at the pilot scale, accounting for heat loss. Modeling studies indicated that heat loss at locations other than the heat source impacted the heat duty. For strippers with excess packing, the column was the most important source of heat loss, and values as low as 0.03 GJ/hr can cause pinch and reabsorption of CO2. Solvents like 5 m PZ are more affected by heat loss in the column due to a top-side temperature pinch at high lean loading. Heat loss impacts NGCC CO2 capture more than coal-based CO2 capture. Surface temperature measurements pilot plants showed that heat loss was 50-75% controlled by natural convection. Measured heat loss was correlated with steam flowrate and wind speed and ranged from 8126 to 219668 Btu/hr, representing 35% of the measured heat rate on average. Net heat duty linearly varied with CO2 removal at low lean loading and was similar for coal and NGCC conditions at fixed removal. At 90% removal, net heat duty was about 2.5 GJ/t with 4 and 12% CO2 in the flue gas. 7 At NGCC conditions, strippers with finite packing can benefit from a flashing feed to the top of the column by using a hot bypass. A flashing feed was linked to a reduction in irreversibility of the stripper from temperature driving forces. It also reduces heat duty by up to 6% at fixed packing height and reduces packing requirement for a fixed steam heater size compared to a warm bypass. Lean loading and lean solvent rate were effective handles to maximize profitability of a fixed stripper design at low gas price. High ambient temperature operation can benefit from low pressure stripping to about 0.18 lean loading at 150 ℃ to maintain the cyclic capacity at reduced rich loading. At low gas price, the capture plant was able to maximize profitability even with a high heat duty of 2.7-3.1 GJ/t at a lean loading of 0.2-0.22 mol/mol. Heat recovery by partial water vapor condensation in a gas-liquid exchanger can be replaced by a direct contact condenser (DCC). The DCC improved gas cooling and reduced heat duty compared to the CO2 exchanger at 0.2 lean loading. The DCC when used with a 150 ℃/5.5 bar stripper can reduce the cost of capture compared to the base case by $3- 4/tonne at 15 ft of packing (optimum) but increases cost of capture by $6/tonne with a 120 ℃/2 bar stripper and 10 ft of packing (optimum). The DCC can work effectively with a solvent with a high heat of absorption and thermal stability.

Suresh Babu, Athreya↗
DOE OSTI2024

Evaluating Nationwide Supply Chain for Circularity of PET and Olefin Plastics

PET (Polyethylene Terephthalate, #1) and olefin plastics including HDPE (High Density Polyethylene, #2), LDPE/LLDPE (Low Density/Linear Low-Density Polyethylene, #4) and PP (Polypropylene, #5) together comprise nearly 80% of the U.S. plastic market. Due to their high market share and extensive application in packaging these polymers have better potential for circularity than other polymer types. To understand the potential of future scenarios with higher recycling rates, supply chain scenarios for PET and olefin plastic packaging need to be analyzed with increased availability and collection of plastics. Currently there exists a knowledge gap to understand the circular supply chain on a national level. Performing a nationwide analysis introduces certain challenges such as variability in the plastic mix of the recycling stream in different municipalities, lack of collection of some types of plastics, regional differences in cost and estimating a national supply curve based on state level access rate and participation rate. Currently, a limited number of Plastic Reclaimers recycle the nation’s collected plastic involving transportation over long distances surpassing state boundaries. Modeling a nationwide scenario instead of regional/state based scenario will facilitate transportation beyond state boundaries for the development of a circular economy. A Mixed-integer Linear Programming model was developed, to identify the optimal location and capacity of the Material Recovery Facilities (MRFs) nationwide subject to maximizing the profit margin of the industrial entities within the model. We considered three different scenarios including the base case scenario (S1) collecting 2.27 million metric tons/year as well as two additional scenarios with available plastic supply of 1.8 times (S2) and 2.2 times (S3) of the base case scenario. The model identified 166, 275 and 319 counties as potential MRF locations for scenarios S1, S2 and S3 respectively. Compared to the existing number of counties having MRFs in the US, the model results indicated a reduction of 38% of MRFs for S1. For S2 and S3, the number of counties with MRFs increased 3% and 20% respectively compared to counties currently with MRFs. The average profit remains constant between $180-$181/ton regardless of the increased plastic collection.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗
DOE OSTI2026

A Physics-Informed Reinforcement Learning Framework for Economic-Thermal Co-Optimization of Crypto Mining Data Centers: Preprint

The rapid expansion of cryptocurrency mining has created a new class of high-density data centers characterized by extreme thermal flux and high sensitivity to volatile economic markets. Traditional thermal management strategies, typically reliant on rule-based control, maintain static setpoints that fail to account for fluctuating electricity prices and cryptocurrency values - factors critical to mining profitability. To address this, we present a physics-informed reinforcement learning (PIRL) framework for economic-thermal co-optimization in crypto mining data centers. This framework consists of a proximal policy optimization (PPO) agent, a virtual testbed powered by high-fidelity physics-based models, and an interactive frontend dashboard. The PPO agent is trained using the virtual testbed and strict hardware safety limits. This physics-informed approach allows the agent to learn a stochastic policy that dynamically balances mining revenue against operational costs by co-optimizing HVAC cooling setpoints and IT computational hashrate. The simulation results demonstrate that the integrated framework achieved an 8.62% increase in net operational profit compared to traditional baseline strategies while strictly adhering to safety-critical temperature constraints (coolant supply temperature < 32 degrees C). This work provides a scalable template for the deployment of reinforcement learning in mission critical facilities where economic volatility and physical safety must be managed simultaneously.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Proactive Assignment Strategy With Human Choice Models for Boosting Pooled Rideshare Service

This study analyzes various human factors considerations in estimating discounts for pooled rideshare trips. The discounts are utilized in an optimization-based rideshare assignment strategy (proactive strategy) and compared against each other, as well as a heuristic strategy attempting to replicate current real-world pooling rates. Simulations within Austin, Texas and Greenville, South Carolina, reveal the proactive strategy’s ability to increase average vehicle occupancy by 0.23 persons/mile in Austin and 0.52 persons/mile in Greenville. A significant ability to decrease trip rejections and increase profitability is also observed. Finally, the strengths of particular combinations of factors are discussed relative to their effectiveness in each region.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Coordination Polymer Electrocatalysts Enable Efficient CO‐to‐Acetate Conversion

Abstract Upgrading carbon dioxide/monoxide to multi‐carbon C 2+ products using renewable electricity offers one route to more sustainable fuel and chemical production. One of the most appealing products is acetate, the profitable electrosynthesis of which demands a catalyst with higher efficiency. Here, a coordination polymer (CP) catalyst is reported that consists of Cu(I) and benzimidazole units linked via Cu(I)‐imidazole coordination bonds, which enables selective reduction of CO to acetate with a 61% Faradaic efficiency at −0.59 volts versus the reversible hydrogen electrode at a current density of 400 mA cm −2 in flow cells. The catalyst is integrated in a cation exchange membrane‐based membrane electrode assembly that enables stable acetate electrosynthesis for 190 h, while achieving direct collection of concentrated acetate (3.3 molar) from the cathodic liquid stream, an average single‐pass utilization of 50% toward CO‐to‐acetate conversion, and an average acetate full‐cell energy efficiency of 15% at a current density of 250 mA cm −2 .

Luo, Mingchuan↗
DOE OSTI2024

Corrosion Engineering of Part‐Per‐Million Single Atom Pt 1 /Ni(OH) 2 Electrocatalyst for PET Upcycling at Ampere‐Level Current Density

The plastic waste issue has posed a series of formidable challenges for the ecological environment and human health. While conventional recycling strategies often lead to plastic down-cycling, the electrochemical strategy of recovering valuable monomers enables an ideal, circular plastic economy. Here a corrosion synthesized single atom Pt 1 /Ni(OH) 2 electrocatalyst with part-per-million noble Pt loading for highly efficient and selective upcycling of polyethylene terephthalate (PET) into valuable chemicals (potassium diformate and terephthalic acid) and green hydrogen is reported. Electro-oxidation of PET hydrolysate, ethylene glycol (EG), to formate is processed with high Faraday efficiency (FE) and selectivity (>90%) at the current density close to 1000 mA cm −2 (1.444 V vs RHE). The in situ spectroscopy and density functional theory calculations provide insights into the mechanism and the understanding of the high efficiency. Remarkably, the electro-oxidation of EG at the ampere-level current density is also successfully illustrated by using a membrane-electrode assembly with high FEs to formate integrated with hydrogen production for 500 h of continuous operation. In conclusion, this process allows valuable chemical production at high space-time yield and is highly profitable (588–700 $\$$ ton −1 PET), showing an industrial perspective on single-atom catalysis of electrochemical plastic upcycling.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metal–Organic Framework Integrating Ionic Framework and Bimetallic Coupling Effect for Highly Efficient Oxygen Evolution Reaction

Metal–organic frameworks (MOFs) are recognized as promising electrocatalysts for the oxygen evolution reaction (OER) because of their permanent porosity and rich architectural diversity; however, ionic MOFs enabling fast ions exchange during OER are rarely explored. Here, an ionic MOF (Ni-btz) constructed with an azolate ligand is selected, and continuous 3D bimetallic MOF (NiFe-btz) films deriving from high-degree intergrowth of microsized MOFs particles are fabricated. The as-prepared NiFe-btz/NF-OH electrode exhibits excellent OER performance with a low overpotential of 239 mV at 10 mA cm –2 under alkaline condition. The OER charge transfer process and bimetallic coupling effect in ionic NiFe-btz are probed by density functional theory calculations and confirmed via X-ray photoelectron spectroscopy and in situ Raman measurements. The partial density of states of NiFe-btz indicates that the main contribution for electron density around the Fermi level is from Cl ions clarifying the profitable impact of ionic MOF framework. This work systematically demonstrates the relationship of electronic structure and OER activity in ionic, bimetallic MOFs and expands the scope of 3D MOF films for efficient OER.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scalable Direct Recycling of Cathode Black Mass from Spent Lithium‐Ion Batteries

Abstract End of life (EoL) lithium‐ion batteries (LIBs) are piling up at an intimidating rate, which is alarming for environmental health. With further expected rapid growth of LIB use, the magnitude of spent battery accumulation is also expected to grow. LiNi x Co y Mn z O 2 (NCM) cathode materials are a dominant chemistry in high energy LIBs, and make up a huge portion of this waste accumulation. Direct recycling is one of the most promising ways to turn this waste to wealth, but has been limited to lab‐scale, due to lack of robustness, namely the tedious pretreatment required that involves toxic organic solvents. Herein, a process that integrates the pretreatment and relithiation of the cathode black mass is demonstrated. Cathode material from EoL electric vehicle (EV) batteries is treated in a 100 g per batch operation and the regenerated cathode active material demonstrates 100% electrochemical performance recovery, with 91% yield rate, and shows promise for further scale up. This process has the advantages of integration, scalability, and universality, which clears the barricade for direct recycling to move from lab to industry scale with considerable profitability.

Chemistry↗
DOE OSTI2026

Design and optimization of processes for recovering rare earth elements from end‐of‐life permanent magnets

Recovery of rare earth elements (REEs) from end-of-life (EOL) products represents a strategic opportunity to strengthen the domestic supply chain for rare earth elements. This work presents a superstructure-based optimization framework for finding the most economical processing pathway for different EOL rare earth permanent magnets (REPMs). The framework evaluates state-of-the-art technologies across four processing stages—disassembly, demagnetization, leaching and extraction, and precipitation and calcination—using net present value (NPV) maximization and cost of recovery (COR) minimization objectives. A novel bottom-up costing framework for hydrogen decrepitation is also introduced. Two feedstocks were considered: REPMs from EOL hard disk drives (HDDs), and electric and hybrid electric vehicles (EVs and HEVs). While HDD recycling proved unprofitable due to limited feedstock availability, EVs/HEVs were profitable across a range of parameters and cost estimates. Therefore, our findings suggest that the proposed EOL EV/HEV recycling process may be economical and is worthy of further investigation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Specialty chemicals production case study: Economic analysis of modular chemical process intensification versus conventional stick‐built approaches

Abstract The beneficial synergies of chemical process intensification and plant modularization present a unique step‐wise advancement opportunity for many chemical manufacturers, but economic case studies are needed to raise awareness of such opportunities. The primary objective of this case study is to better understand the business case economics of a specialty chemical plant using modular chemical process intensification (MCPI), by comparing it with that of a conventional stick‐built (CSB) plant that produces the same product at the same production capacity. When comparing MCPI against CSB approaches for a plant project strategy decision, analysts should thoroughly understand and model the differences and similarities in scope bases. The MCPI approach for this case study benefitted from dramatic reductions in capital expenditures (CAPEX). A sizeable reduction in plant spatial volume likely explains some of these reductions. Sizeable operational expenditure (OPEX) reductions with the MCPI plant appear to be associated with the reduced operator staffing required from converting a labor‐intensive batch process into an automated, continuous flow process. Traditional project investment economic measures strongly favored the MCPI case for the design, construction, and operation of the specialty chemical plant. The net present value for the MCPI case was nearly twice that for the CSB case over a ten‐year period, and the payback period for the CSB case was nearly five times longer than that of the MCPI case. The opinion‐based perspective of the study participant identified significant contributors to superior MCPI economic performance for this case study. With the two conditions of low MCPI CAPEX and high product profit margin, economic analysis indicates that incorporation of a backup MCPI train, for operational redundancy when downtime occurs, is a very beneficial strategy.

O'Connor, James T.↗
DOE OSTI2023

Technoeconomic assessment of distillation heat transfer intensification using aeroelastically fluttering reeds

Dry cooling, where forced air is the heat transfer medium, is a preferable cooling method in arid locations lacking readily available process water. However, such locations often experience high ambient temperatures that limit the effectiveness of air cooling. The objective of this study is to quantify the economic and energetic benefits of heat transfer intensification via the implementation of aeroelastically fluttering reeds to the air-cooled condenser of a methanol distillation column. Condenser size and performance, regarding recovered methanol and required fan power, is evaluated across condenser operating temperatures (T cond ) from 60 to 62°C and heat transfer coefficients (U) U base –2U base for a range of inlet air temperatures based on ambient temperature data from Yuma, Arizona. Under typical design sizing, condenser capital cost was reduced by 6%–35% (1.3U base –2U base ) and nominal methanol recovery was increased from 0.26% to 0.38% (T cond = 62–60°C). At optimized condenser size, all enhanced U and T cond pairs increase methanol recovery and reduce fan power costs compared to the optimal Ubase reference. Overall, using enhanced heat transfer to maintain condenser temperature under a wider range of inlet conditions, rather than to reduce operation temperature, produces more favorable performance. Methanol price is not a determining factor in which pairs are profitable. Analysis was repeated for a global warming scenario, revealing more valuable improvements under elevated temperatures. Energy savings from condenser improvement to a methanol production system are not significant with respect to an optimized conventional system. Furthermore, unit economic and energetic incentives suggest implementation of fluttering reeds may be justified in other applications.

42 ENGINEERING↗
DOE OSTI2021

Supply analysis of preferential market incentive for energy crops

This analysis explores the valuation of feedstock quality attributes of switchgrass and miscanthus – two energy crops poised for future expansion – and compares the relative economic availability of these two crops under two scenarios: (i) uniform price assumptions (i.e., no incentive for quality), and (ii) a scenario of a price premium based on convertibility (i.e., an incentive for quality). Given data on cellulose content, hemicellulose content, and their relative convertibility, miscanthus is expected to be 11% more efficient at conversion to biofuels than switchgrass under the biochemical conversion route. Based on this scenario of improved conversion efficiency and associated profit, we simulate an 11% price premium for miscanthus over other feedstocks in a base-case scenario. By adding this price premium, supplies of miscanthus increase over the base case by about 4 million (44%), 94 million (64%), and 166 million (94%) tons in year 0, 10, and 20 after simulated contracts for production are initiated respectively. These results emphasize that custom simulations are needed to quantify feedstock availability if supplies are intended to reflect grower response to industry demands for feedstock quality specifications. Farmers can grow ‘peas or carrots’, and price signals from biorefineries will influence what energy crops they produce. Recognizing that the energy crop mix is tractable according to quality characteristics is relevant both for near-term and long-term biofuels research and development. Here, we recommend accounting for market preferences for quality attributes when estimating potential future supplies of energy crops.

09 BIOMASS FUELS↗
DOE OSTI2023

Carbon mitigation payments can reduce the riskiness of bioenergy crop production

Abstract Perennial bioenergy crops provide substantial carbon mitigation benefits but have risky returns. We couple economic analysis with a biogeochemical model (DayCent) to examine the effect of carbon mitigation payments on the spatially varying bioenergy crop returns and risk profiles relative to conventional crops across the rainfed United States. These payments increase the likelihood of positive profit in the Midwest for miscanthus and southern states for switchgrass. At low biomass prices, these payments make bioenergy crops appealing to risk‐averse farmers. At moderate biomass prices, these payments make bioenergy crops appealing to all farmers regardless of risk preference.

09 BIOMASS FUELS↗
DOE OSTI2020

The effects of different types of mulch on soil properties and tea production and quality

Abstract BACKGROUND Tea is an important economic crop in China. Mulching, a modern agricultural practice, can modify the soil microenvironment and maintain the crop yield. RESULTS To investigate the effect of different mulching modes on tea plant growth, filed experiments were conducted in a Shizipu tea plantation located in Langxi Country (Xuanchen City, Anhui Province, China). Five treatments were carried out in a randomized complete block arrangement: (i) clean tillage (control); (ii) black plastic film; (iii) weed barrier fabric; (iv) rice straw mulch; and (v) intercropping with Vulpia myuros . The effects of different mulch modes on soil temperature, water moisture, soil compactness, root activity, soil enzyme activity and nutrition status on tea yield, quality and economic benefits were compared at the harvest stage. In the present study, compared with other mulch treatments, intercropping with V. myuros significantly reduced the topsoil temperature (to an optimum temperature) and soil compactness, and increased the water holding capacity in the deep soil layer, which contributed to increased tea root activity and respiration. Furthermore, intercropping with V. myuros significantly increased soil enzymes activity, soil organic matter, and the available nitrogen and phosphorus concentrations in the main root zone. Therefore, the stronger tea root activity accelerated nutrition uptake and increased the tea yield and quality‐related components of the tea, thus resulting in a larger average net income. CONCLUSION Intercropping with V. myuros could serve as a profitable agricultural method for tea production. © 2020 Society of Chemical Industry

Xianchen, Zhang↗
DOE OSTI2025

Opportunities for Cerium Valorization in the Rare Earth Supply Chain

Rare earth (RE) elements are co-located in ore deposits and must be treated together during the difficult extraction and separation. Cerium is the majority element in most deposits (> 50 %), and the growing need for Nd, Pr and the heavy lanthanides in permanent magnets and other energy transition technologies results in costly stockpiling of cerium oxide which has low demand. Finding new high-value applications for cerium or its compounds is therefore a sought-after goal to improve the profitability of rare earth mining and processing. Here, this contribution will highlight the use of cerium in high-strength aluminum alloys and the preparation of Ce-based permanent magnets as two emerging technologies for high-value products that have potential to stabilize the fluctuating rare earth market, substitute critical materials, support the nascent domestic rare earth industry and provide technologies for the pending green energy transition.

Energy - Conversion, Materials science↗
DOE OSTI2020

Coherent elastic neutrino-nucleus scattering at the European Spallation Source

The European Spallation Source (ESS), presently well on its way to completion, will soon provide the most intense neutron beams for multi-disciplinary science. Fortuitously, it will also generate the largest pulsed neutrino flux suitable for the detection of Coherent Elastic Neutrino-Nucleus Scattering (CEνNS), a process recently measured for the first time at ORNL’s Spallation Neutron Source. We describe innovative detector technologies maximally able to profit from the order-of-magnitude increase in neutrino flux provided by the ESS, along with their sensitivity to a rich particle physics phenomenology accessible through high-statistics, precision CEνNS measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Combining biotechnology with sustainability: feasibility of bioenergy sorghum in generating high-value bioproducts

Biofuels generated through fermentation of plant-derived lignocellulosic biomass are currently not competitive with fossil fuels. Here, a framework is described for the engineering of valuable coproducts to improve the economic feasibility of biofuel production. To accomplish this goal, the desirable traits of the bioenergy crop Sorghum bicolor are harnessed via modern engineering approaches. A robust analysis is provided to highlight the scientific basis, costs, regulatory challenges, and lucrative nature of coproduct development. Sustainable biofuel production could also have far-reaching societal impacts, especially in the context of our rapidly changing global climate. This perspective suggests that the path to profitable biofuel production is attainable and encourages consideration of similar approaches by the biotechnology industry.

09 BIOMASS FUELS↗
DOE OSTI2023

Optimal Sizing and Dispatch of Solar Power with Storage

Designers of utility-scale solar plants with storage, seeking to maximize some aspect of plant performance, face multiple challenges. In many geographic locations, there is significant penetration of photovoltaic generation, which depresses energy prices during the hours of solar availability. An energy storage system affords the opportunity to dispatch during higher-priced time periods, but complicates plant design and dispatch decisions. Solar resource variability compounds these challenges, because determining optimal system sizes requires simultaneously considering how the plant will be operated under the imposed market and weather conditions. We develop an approach to analyze the economic performance of hybrid and single-technology solar power plants, which incorporates optimal dispatch, and considers the expected electricity market and weather conditions. We utilize the System Advisor Model software package to simulate the operation of multiple renewable generation and energy storage technologies, in conjunction with hourly-fidelity generation decisions determined by a revenue-maximizing, mixed-integer linear program. We show that, under our assumed market and weather conditions, the lifetime benefit-to-cost ratio can be improved by 6 to 19 percent, relative to a baseline design without optimizing, and that a concentrating solar power with thermal energy storage design produces significantly more energy per year, but is less profitable under our cost assumptions.

black-box optimization↗