SEARCH · Engineering Papers

Results for “prime generator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Strain accumulation in the Santa Barbara Channel, 1971-1987

Geophysical evidence suggests a significant amount of north-south convergence occurs across the Santa Barbara Channel. Tectonic studies indicate a discrepancy between observed fault slip in California and the North American-Pacific plate motion. Newer plate motion models (NUVEL-1) yield a lower rate of convergence. Global Positioning System (GPS) data collected in the Santa Barbara Channel in 1987, when combined with 1971 trilateration measurements, should be sufficient to resolve the present-day convergence rate. In early 1987. from January 3 to 7, GPS data were collected at 14 sites in California and at 5 additional stations throughout North America. The data can be used to estimate the rate of crustal deformation (convergence) ocurring across the Santa Barbara Channel. The GPS baselines were computed with the Bernese 2nd generation software. A comparison was made between baseline lengths obtained with the Burnese and MIT softwares. Baseline changes from 1971 to January, 1987 (GPS-Bernese) across the Santa Barbara Channel were computed. A uniform strain model was calculated from the baseline changes. The present-day rate of convergence across the Santa Barbara Channel was determined to be 8 to 10 mm/yr. This conclusion is obtained from changes in the baseline length measured with a 1971 trilateration survey and a January, 1987, GPS survey. The rapid convergence rate, in addition to the history of large seismic events, suggests this region is a prime target for future geodetic and geophysical studies.

Larsen, Shawn↗

NASA NTRS1984

Facular Limb-darkening Functions for Irradiance Modeling

The limb darkening function of faculae is an important factor in estimating facular contributions to solar irradiance variations. The existing photometric data is reviewed and a synthetic limb darkening function for faculae was generated which was compared with the limb darkening functions currently in use for irradiance modeling. The excess facular flux ranges from 0.017 to 0.0349 of the solar photospheric flux for the various representations. The present limitation appears to be the lack of comprehensive photometric data. The representations are especially varied near the limb, where photometry is most difficult. Synoptic data on calcium plage areas is used as a substitute for facular areas in modeling. Based upon the existing data, the present best value for the effect of faculae on the solar constant is given by delta s/s = 3.9 x 10(-8) A (sub plage prime) for an active region near disk center, where A (sub plage) is the calcium plage area in millionths of a solar hemisphere.

Hirayama, T.↗

NASA NTRS2008

LISA Beyond Einstein: From the Big Bang to Black Holes. LISA Technology Development at GSFC

This viewgraph presentation reviews the work that has been ongoing at the Goddard Space Flight Center (GSFC) in the development of the technology to be used in the Laser Interferometer Space Antenna (LISA) spacecrafts. The prime focus of LISA technology development efforts at NASA/GSFC has been in LISA interferometry. Specifically efforts have been made in the area of laser frequency noise mitigation. Laser frequency noise is addressed through a combination of stabilization and common-mode rejection. Current plans call for two stages of stabilization, pre-stabilization to a local frequency reference and further stabilization using the constellation as a frequency reference. In order for these techniques to be used simultaneously, the pre-stabilization step must provide an adjustable frequency offset. This presentation reports on a modification to the standard modulation/demodulation technique used to stabilize to optical cavities that generates a frequency-tunable reference from a fixed length cavity. This technique requires no modifications to the cavity itself and only minor modifications to the components. The measured noise performance and dynamic range of the laboratory prototype meet the LISA requirements.

Thorpe, James Ira↗

NASA NTRS1992

The ALEXIS data processing package: An IDL based system

The Array of Low Energy X-ray Imaging Sensors (ALEXIS) experiment consists of a mini-satellite containing six wide angle EUV/ultrasoft x-ray telescopes. Its purpose is to map out the sky in three narrow (approximately 5 percent) bandpasses around 66, 71, and 93 eV. The 66 and 71 eV bandpasses are centered on intense Fe emission lines which are characteristic of million degree plasmas such as the one thought to produce the soft x-ray background. The 93 eV bandpass is not near any strong emission lines and is more sensitive to continuum sources. The mission will be launched on the Pegasus Air Launched Vehicle in the second half of 1992 into a 400-nautical-mile, high inclination orbit and will be controlled entirely from a small ground station located at Los Alamos. The project is a collaborative effort between Los Alamos National Laboratory, Sandia National Laboratory, and the University of California-Berkeley Space Sciences Laboratory. The six telescopes are arranged in three pairs. As the satellite spins twice a minute they scan the entire anti-solar hemisphere. Each f/1 telescope consists of a spherical, multilayer-coated mirror with a curved, microchannel plate detector located at the prime focus. The multilayer coatings determine the bandpasses of the telescopes. The field of view of each telescope is 30 degrees with a spatial resolution of 0.5 degree, limited by spherical aberration. The data processing requirements for ALEXIS are large. Each event is one of the six telescopes is telemetered to the ground with its time of arrival and position on the detector. This information must be folded with the aspect solution for the satellite to reconstruct the direction on the sky from which the photon came. Because of the way the six telescopes scan the sky, the effective exposure calculation is also very computationally intensive. ALEXIS may generate up to 100 megabytes of raw data per day, which are converted into a gigabyte per day of processed data. While the processing job for ALEXIS is sizable, the programming staff is small. To maximize programming efficiency, and to make the best use of tools available in the public domain, we chose IDL as our software development platform. IDL was used from the start of instrument development through flight. We use IDL as a top-level executive for the processing tasks (replacing Unix shell scripts), as a device independent graphics engine, as a database manager, and as a final data manipulator. IDL routines spawn special purpose C programs to perform detailed telemetry deconvolution and other specialized functions. We discuss the use of IDL and C within the processing and archiving strategy for the ALEXIS data anlaysis system as implemented on a SPARCstation platform. We also show results from our End-to-End software simulation capability as processed by our analysis codes.

Bloch, J. J.↗

NASA NTRS2009

Pulsar Simulations for the Fermi Large Area Telescope

Pulsars are among the prime targets for the Large Area Telescope (LAT) aboard the recently launched Fermi observatory. The LAT will study the gamma-ray Universe between 20 MeV and 300 GeV with unprecedented detail. Increasing numbers of gamma-ray pulsars are being firmly identified, yet their emission mechanisms are far from being understood. To better investigate and exploit the tAT capabilities for pulsar science. a set of new detailed pulsar simulation tools have been developed within the LAT collaboration. The structure of the pulsar simulator package (PulsarSpeccrum) is presented here. Starting from photon distributions in energy and phase obtained from theoretical calculations or phenomenological considerations, gamma-rays are generated and their arrival times at the spacecraft are determined by taking Into account effects such as barycentric effects and timing noise. Pulsars in binary systems also can be simulated given orbital parameters. We present how simulations can be used for generating a realistic set of gamma rays as observed by the LAT, focusing on some case studies that show the performance of the LAT for pulsar observations.

Razzano, M.↗

NASA NTRS1993

Solar dynamic power system development for Space Station Freedom

The development of a solar dynamic electric power generation system as part of the Space Station Freedom Program is documented. The solar dynamic power system includes a solar concentrator, which collects sunlight; a receiver, which accepts and stores the concentrated solar energy and transfers this energy to a gas; a Brayton turbine, alternator, and compressor unit, which generates electric power; and a radiator, which rejects waste heat. Solar dynamic systems have greater efficiency and lower maintenance costs than photovoltaic systems and are being considered for future growth of Space Station Freedom. Solar dynamic development managed by the NASA Lewis Research Center from 1986 to Feb. 1991 is covered. It summarizes technology and hardware development, describes 'lessons learned', and, through an extensive bibliography, serves as a source list of documents that provide details of the design and analytic results achieved. It was prepared by the staff of the Solar Dynamic Power System Branch at the NASA Lewis Research Center in Cleveland, Ohio. The report includes results from the prime contractor as well as from in-house efforts, university grants, and other contracts. Also included are the writers' opinions on the best way to proceed technically and programmatically with solar dynamic efforts in the future, on the basis of their experiences in this program.

Source record↗

NASA NTRS1981

NASA V/STOL Propulsion Control Analysis - Phase I and II program status

NASA-Lewis Research Center initiated the V/STOL Propulsion Control Analysis Program in 1979 in order to take advantage of advanced electronic control technology for the next generation of V/STOL aircraft. The rationale, methods, and criteria developed during Phase I and Phase II of the program are discussed first. The development of an integrated flight and propulsion control system is then described. Most V/STOL aircraft under consideration depend on reaction thrusters or separate lift engines for attitude control and on engine thrust variations for height control. S/CTOL aircraft vector-thrust for pitch control during low speed operation. The baseline propulsion control system provides a thrust level response of 10 rad/sec and a vectoring response of 22 rad/sec. The requirements of the control components include: (1) redundant electronic control computers with minimum software and 100% Fault Coverage; (2) prime reliable electromechanical actuator interfaces; (3) miniature, digitally compatible sensors with easily detected failure modes; and (4) dual element, fail operational fuel pumps.

Miller, R. J.↗

NASA NTRS2008

Durability Assessment of TiAl Alloys

The durability of TiAl is a prime concern for the implementation of TiAl into aerospace engines. Two durability issues, the effect of high temperature exposure on mechanical properties and impact resistance, have been investigated and the results are summarized in this paper. Exposure to elevated temperatures has been shown to be detrimental to the room temperature ductility of gamma alloys with the most likely mechanisms being the ingress of interstitials from the surface. Fluorine ion implantation has been shown to improve the oxidation resistance of gamma alloys, and ideally it could also improve the environmental embrittlement of high Nb content TiAl alloys. The effect of F ion implantation on the surface oxidation and embrittlement of a third generation, high Nb content TiAl alloy (Ti-45Al-5Nb-B-C) were investigated. Additionally, the ballistic impact resistance of a variety of gamma alloys, including Ti-48Al-2Cr- 2Nb, Ti-47Al-2Cr-2Nb, ABB-2, ABB-23, NCG359E, 95A and Ti-45Al-5Nb-B-C was accessed. Differences in the ballistic impact properties of the various alloys will be discussed, particularly with respect to their manufacturing process, microstructure, and tensile properties.

Draper, Susan L.↗

NASA NTRS1965

Report from Mars - Mariner IV, 1964-1965

The successful mission of Mariner IV is a most gratifying conclusion to the first generation of lunar and planetary exploration, which has been based on lightweight automatic unmanned spacecraft in constant communication with Earth, designed for lunar impact or planetary encounter. The flight of this first Mars probe is noteworthy not only for the outstanding quantity and quality of scientific data but also as the verification of large and useful advances in a number of technological areas. The Mariner Mars Project of 1964-1965 was conducted for the National Aeronautics and Space Administration by the Jet Propulsion Laboratory; it was made possible by the valued assistance and support of many government agencies, scientific institutions, and industrial concerns. Among these are NASA's Lewis Research Center (Launch Vehicle Systems Manager) and their prime contractors, Lockheed Missiles and Space Corporation and General Dynamics/Convair; Goddard Space Flight Center (Launch Operations) and other agencies at Cape Kennedy; the agencies of the Australian, South African, and Spanish governments which operate overseas tracking stations; many hundreds of American industrial contractors and vendors; and a number of scientists in various fields of endeavor. The Project was established in late 1962 with the objective of conducting scientific observations near the planet Mars and returning the data to Earth for study and analysis; secondary objectives were to develop and study the equipment and techniques involved and to make certain scientific measurements of the interplanetary environment on the way to Mars. Successful accomplishment of these objectives under the severe constraints which were a part of the mission is a tribute to every single individual who shared in the preparation and execution of the Mariner Mars Project.

MARINER IV SPACE PROBE↗

NASA NTRS1984

An overview of the evolution of Landsat-4

Landsat-4 was launched on July 16, 1982, from Vandenberg Air Force Base in California. This launch culminated over a decade of planning, design, and implementation effort. During this period, many decisions and choices had to be made involving such items as the characteristics of the second-generation observing instrument named the Thematic Mapper (TM), the orbital altitude and coverage pattern, the configuration of the ground processing systems, etc. In total, the design and operation of Landsat-4 depart substantially from those of the successful Landsat 1, 2, and 3 series. Results derived from the operation of Landsat-4 systems and analyses of data products indicate that there have been very significant successes associated with Landsat-4. The TM provides observations that are considerably improved over the Multispectral Scanner (MSS). The middle-infrared bands at 1.6 and 2.2 micrometers, for example, are providing land-cover classification results that meet or exceed expectations. It is now hoped that successful operation of Landsat-4, Landsat-D' (D-prime), and the Tracking and Data Relay Satellite System (TDRSS) will permit the acquisition of a worldwide set of TM and MSS observations.

Salomonson, V. V.↗

NASA NTRS1980

A suggestion concerning the generation of the physical state of stellar mantles

The physical state of the winds of B supergiants varies from one of a high level of ionization and rapid outflow to one of relatively low ionization and a moderate rate of outflow as one goes from type B0 to type A0. It is proposed here that this is the result of magnetodynamic energy being released in the mantles of these stars, much as occurs in the sun. Data are presented to show that this idea is plausible. It is noted that the release of magnetodynamic energy as the result of interaction between magnetic fields and differential motion in an inhomogeneous structure is probably the cause of the heating in all outer stellar atmospheres (mantles). In the late-type stars, the material in the mantle must first be ionized by the deposition of energy from acoustic waves; in the early-type stars, the material is already ionized at least once in the photosphere, as a result of the normal transfer of radiative energy, so no priming process is necessary for these stars.

Underhill, A. B.↗

NASA NTRS1972

Speed in Information Processing with a Computer Driven Visual Display in a Real-time Digital Simulation

Information transfer between the operator and computer-generated display systems is an area where the human factors engineer discovers little useful design data relating human performance to system effectiveness. This study utilized a computer-driven, cathode-ray-tube graphic display to quantify human response speed in a sequential information processing task. The performance criteria was response time to sixteen cell elements of a square matrix display. A stimulus signal instruction specified selected cell locations by both row and column identification. An equal probable number code, from one to four, was assigned at random to the sixteen cells of the matrix and correspondingly required one of four, matched keyed-response alternatives. The display format corresponded to a sequence of diagnostic system maintenance events, that enable the operator to verify prime system status, engage backup redundancy for failed subsystem components, and exercise alternate decision-making judgements. The experimental task bypassed the skilled decision-making element and computer processing time, in order to determine a lower bound on the basic response speed for given stimulus/response hardware arrangement.

Kyle, R. G.↗

NASA NTRS2001

[Growth and development of plants in a sequence of generations under the conditions of space flight (experiment Greenhouse-3)]

The purpose was to study characteristic features of growth and development of several plant generations in space flight in experiment GREENHOUSE-3 as a part of the Russian-US space research program MIR/NASA in 1997. The experiment consisted of cultivation of Brassica rapa L. in board greenhouse Svet. Two vegetative cycles were fully completed and the third vegetation was terminated on day 13 on the phase of budding. The total duration of the space experiment was 122 days, i.e. same as in the ground controls. In the experiment with Brassica rapa L. viable seeds produced by the first crop were planted in space flight and yielded next crop. Crops raised from the ground and space seeds were found to differ in height and number of buds. Both parameters were lowered in the plants grown from the space seeds. The prime course for smaller size and reduced organogenic potential of plantTs reproductive system seems to be a less content of nutrients in seeds that had matured in the space flight. Experiment GREENHOUSE-3 demonstrated principle feasibility of plant reproduction in space greenhouse from seeds developed in microgravity.

manned↗

NASA NTRS2018

Principles for a Practical Moon Base

NASA planning for the human space flight frontier is now coming into alignment with goals promoted by other planetary-capable national space agencies. US policy aims to achieve the “horizon goal” of Humans to Mars through significant learning about systems, operations, and partnerships in the cislunar and lunar-surface environment first. US Space Policy Directive 1 made this shift explicit: “the United States will lead the return of humans to the Moon for long-term exploration and utilization, followed by human missions to Mars and other destinations”. The stage is now set for sufficient public and private American investment in a wide range of lunar activities. Assumptions about Moon base architectures and operations are likely to drive the invention of requirements that will in turn govern development of systems, commercial-services purchase agreements, and priorities for technology investment. Yet some fundamental architecture-shaping lessons already captured in the literature are not evident drivers, and remain absent from most depictions of lunar base concepts. A prime example is general failure to recognize that most of the time (i.e., before and between intermittent human occupancy), a Moon base must be robotic: most of the activity, most of the time, must be implemented by robot agents rather than astronauts. This paper reviews key findings of a seminal robotic-base design-operations analysis commissioned by NASA in 1989. It culminates by discussing implications of these lessons for today’s Moon Village and SPD-1 paradigms: exploration by multiple actors; public-private partnership development and operations; cislunar infrastructure; production-quantity exploitation of volatile resources near the poles to bootstrap further space activities; autonomy capability that was frontier in 1989 but now routine within terrestrial industry. We need to engineer today’s generation of practical, justifiable, and inspirational Moon base concepts.

Sherwood, Brent↗

NASA NTRS2007

RF Performance of Membrane Aperture Shells

This paper provides an overview of recent results establishing the suitability of Membrane Aperture Shell Technology (MAST) for Radio Frequency (RF) applications. These single surface shells are capable of maintaining their figure with no preload or pressurization and minimal boundary support, yet can be compactly roll stowed and passively self deploy. As such, they are a promising technology for enabling a future generation of RF apertures. In this paper, we review recent experimental and numerical results quantifying suitable RF performance. It is shown that candidate materials possess metallic coatings with sufficiently low surface roughness and that these materials can be efficiently fabricated into RF relevant doubly curved shapes. A numerical justification for using a reflectivity metric, as opposed to the more standard RF designer metric of skin depth, is presented and the resulting ability to use relatively thin coating thickness is experimentally validated with material sample tests. The validity of these independent film sample measurements are then confirmed through experimental results measuring RF performance for reasonable sized doubly curved apertures. Currently available best results are 22 dBi gain at 3 GHz (S-Band) for a 0.5m aperture tested in prime focus mode, 28dBi gain for the same antenna in the C-Band (4 to 6 GHz), and 36.8dBi for a smaller 0.25m antenna tested at 32 GHz in the Ka-Band. RF range test results for a segmented aperture (one possible scaling approach) are shown as well. Measured antenna system actual efficiencies (relative to the unachievable) ideal for these on axis tests are generally quite good, typically ranging from 50 to 90%.

Flint, Eirc M.↗

NASA NTRS2003

ISO Key Project: Exploring the Full Range of Quasar/Agn Properties

While most of the work on this program has been completed, as previously reported, the portion of the program dealing with the subtopic of ISO LWS data analysis and reduction for the LWS Extragalactic Science Team and its leader, Dr. Howard Smith, is still active. This program in fact continues to generate results, and newly available computer modeling has extended the value of the datasets. As a result the team requests a one-year no-cost extension to this program, through 31 December 2004. The essence of the proposal is to perform ISO spectroscopic studies, including data analysis and modeling, of star-formation regions using an ensemble of archival space-based data from the Infrared Space Observatory's Long Wavelength Spectrometer and Short Wavelength Spectrometer, but including as well some other spectroscopic databases. Four kinds of regions are considered in the studies: (1) disks around more evolved objects; (2) young, low or high mass pre-main sequence stars in star-formation regions; (3) star formation in external, bright IR galaxies; and (4) the galactic center. One prime focus of the program is the OH lines in the far infrared. The program has the following goals: 1) Refine the data analysis of ISO observations to obtain deeper and better SNR results on selected sources. The ISO data itself underwent 'pipeline 10' reductions in early 2001, and additional 'hands-on data reduction packages' were supplied by the ISO teams in 2001. The Fabry-Perot database is particularly sensitive to noise and slight calibration errors; 2) Model the atomic and molecular line shapes, in particular the OH lines, using revised Monte-Carlo techniques developed by the SWAS team at the Center for Astrophysics; 3) Attend scientific meetings and workshops; 4) Perform E&PO activities related to infrared astrophysics and/or spectroscopy.

Wilkes, Belinda↗

NASA NTRS2013

Orion MPCV Touchdown Detection Threshold Development and Testing

A robust method of detecting Orion Multi ]Purpose Crew Vehicle (MPCV) splashdown is necessary to ensure crew and hardware safety during descent and after touchdown. The proposed method uses a triple redundant system to inhibit Reaction Control System (RCS) thruster firings, detach parachute risers from the vehicle, and transition to the post ]landing segment of the Flight Software (FSW). The vehicle crew is the prime input for touchdown detection, followed by an autonomous FSW algorithm, and finally a strictly time based backup timer. RCS thrusters must be inhibited before submersion in water to protect against possible damage due to firing these jets under water. In addition, neglecting to declare touchdown will not allow the vehicle to transition to post ]landing activities such as activating the Crew Module Up ]righting System (CMUS), resulting in possible loss of communication and difficult recovery. A previous AIAA paper gAssessment of an Automated Touchdown Detection Algorithm for the Orion Crew Module h concluded that a strictly Inertial Measurement Unit (IMU) based detection method using an acceleration spike algorithm had the highest safety margins and shortest detection times of other methods considered. That study utilized finite element simulations of vehicle splashdown, generated by LS ]DYNA, which were expanded to a larger set of results using a Kriging surface fit. The study also used the Decelerator Systems Simulation (DSS) to generate flight dynamics during vehicle descent under parachutes. Proto ]type IMU and FSW MATLAB models provided the basis for initial algorithm development and testing. This paper documents an in ]depth trade study, using the same dynamics data and MATLAB simulations as the earlier work, to further develop the acceleration detection method. By studying the combined effects of data rate, filtering on the rotational acceleration correction, data persistence limits and values of acceleration thresholds, an optimal configuration was determined. The lever arm calculation, which removes the centripetal acceleration caused by vehicle rotation, requires that the vehicle angular acceleration be derived from vehicle body rates, necessitating the addition of a 2nd order filter to smooth the data. It was determined that using 200 Hz data directly from the vehicle IMU outperforms the 40 Hz FSW data rate. Data persistence counter values and acceleration thresholds were balanced in order to meet desired safety and performance. The algorithm proved to exhibit ample safety margin against early detection while under parachutes, and adequate performance upon vehicle splashdown. Fall times from algorithm initiation were also studied, and a backup timer length was chosen to provide a large safety margin, yet still trigger detection before CMUS inflation. This timer serves as a backup to the primary acceleration detection method. Additionally, these parameters were tested for safety on actual flight test data, demonstrating expected safety margins.

Daum, Jared↗

NASA NTRS2015

Durability and CMAS Resistance of Advanced Environmental Barrier Coatings Systems for SiC/SiC Ceramic Matrix Composites

Environmental barrier coatings (EBCs) and SiCSiC ceramic matrix composites (CMCs) systems will play a crucial role in next generation turbine engines for hot-section component applications because of their ability to significantly increase engine operating temperatures with improved efficiency, reduce engine weight and cooling requirements. This paper will emphasize advanced environmental barrier coating developments for SiCSiC turbine airfoil components, by using advanced coating compositions and processing, in conjunction with mechanical and environment testing and durability validations. The coating-CMC degradations and durability in the laboratory simulated engine fatigue-creep and complex operating environments are being addressed. The effects of Calcium-Magnesium-Alumino-Silicate (CMAS) from road sand or volcano-ash deposits on the degradation mechanisms of the environmental barrier coating systems will be discussed. The results help understand the advanced EBC-CMC system performance, aiming at the durability improvements of more robust, prime-reliant environmental barrier coatings for successful applications of the component technologies and lifing methodologies.

Ceramic Matrix Composites↗