Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “precipitation prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

JPSS Preparations at the Satellite Proving Ground for Marine, Precipitation, and Satellite Analysis

The ocean prediction center at the national hurricane center's tropical analysis and forecast Branch, the Weather Prediction center and the Satellite analysis branch of NESDIS make up the Satellite Proving Ground for Marine, Precipitation and Satellite Analysis. These centers had early exposure to JPSS products using the S-NPP Satellite that was launched in 2011. Forecasters continue to evaluate new products in anticipation for the launch of JPSS-1 sometime in 2017.

Remote Sensing↗

Development of Data-Driven Models for Performance Prediction and Chemical Dosing of a Full-Scale Controlled Phosphorus Precipitation Reactor

This study evaluated the use of data-driven models to improve control of a struvite precipitation reactor that removes phosphorus from wastewater while producing a fertilizer product. The researchers developed predictive models for influent orthophosphate concentration, effluent orthophosphate concentration, and phosphorus removal using operational data from a full-scale MagPrex™ reactor at a water resource recovery facility in Denver, Colorado. Model predictions were used to recommend magnesium chloride dosing adjustments needed to achieve a target effluent phosphorus concentration. Several machine learning approaches were tested, with ridge regression providing the best predictions for influent orthophosphate concentration and phosphorus removal, and XGBoost providing the best predictions for effluent orthophosphate concentration. Simulation results indicated that the decision-support approach could correctly identify dosing adjustments in most cases and reduce chemical use. Full-scale implementation achieved lower accuracy due to changing operating conditions and limited historical data in some operating ranges. Here, the results demonstrate the potential of data-driven tools to support phosphorus recovery process control while also identifying practical limitations that affect deployment in full-scale systems.

42 ENGINEERING↗

Isolation of genome-predicted Caldatribacterium ( Atribacterota ) reveals pervasive microbial cultivation problem due to folate precipitation

Most bacterial phyla have few or no pure cultures, including Atribacterota , comprised of ubiquitous anaerobes. Here, we report genome-guided enrichment and isolation of two Atribacterota species representing a new family, Caldatribacterium saccharofermentans from a hot spring, and Caldatribacterium inferamans from a deep aquifer. Both were co-enriched with sulfate-reducing bacteria and initially resisted isolation, which we link to inadvertent removal of precipitated folic acid by filter-sterilization of unbuffered Wolin’s vitamin solution. We then predict folate auxotrophy across the Atribacterota and ~29% of all bacteria, with extensive auxotrophy in 27% of phyla. Since ≥604 of 791 ( ≥ 76%) media with folic acid additions in the MediaDive database use unbuffered vitamin solutions in which folic acid is likely removed during filter-sterilization, we propose that folate auxotrophy limits culturability in defined media en masse. We also uncover unusual features of Caldatribacterium , including three lipid membrane-like layers (LMLs), with the inner LML surrounding the nucleoid, and a high percentage of secreted proteins, supporting a unique cell biology of Atribacterota .

Biological and medical sciences↗

Weather Systems Connecting Modes of Climate Variability to Regional Hydroclimate Extremes

Abstract Weather system clustering provides a high‐level summary of regional meteorological conditions. Most quantitative clustering schemes focus on precipitation alone, which does not sufficiently describe the meteorological conditions driving hydroclimate variability. This study presents the Weather Anomaly Clustering (WAC‐hydro), which extends the existing capability of predicting weather systems to predicting hydroclimate variability. Focusing on both precipitation and temperature predictions, WAC‐hydro identifies 12 clusters of daily weather anomaly modes in the US Pacific Northwest Puget Sound region during 1981–2020. The influence of El Niño‐Southern Oscillation and Madden‐Julian Oscillation on regional precipitation can be well approximated by their modulation on the weather clusters. Within each weather cluster, local factors such as topography only play a secondary role in the hydrologic variability. The weather clusters highlight two types of flood‐inducing regional weather conditions, one causing floods by inducing positive precipitation anomalies and the other causing floods through combined precipitation and temperature‐induced rain‐on‐snow effect.

54 ENVIRONMENTAL SCIENCES↗

High throughput structure–property relationship for additively manufactured 316L/IN625 alloy mixtures leveraging 2-step Bayesian estimation

While the fabrication of graded materials by directed energy deposition (DED) has led to accelerated materials discovery, the ability to rapidly explore sufficiently large material composition spaces is limited due to the time-intensive nature of conventional materials characterization techniques. The present study investigates the viability of small punch test (SPT) protocols for rapidly evaluating DED-fabricated alloy mixtures of stainless steel 316L (316L) and Inconel 625 (IN625). The SPT protocols evaluated in this study include both the recently established two-step Bayesian estimation framework as well as the empirical relationships established in prior literature. It is shown that these protocols are capable of reliably and quantitatively tracking the changes in the mechanical properties of the alloy mixtures studied. Enhancement of mechanical properties was observed with the addition of IN625 to 316L, which is attributed to the austenite stabilization in the matrix and the formation of fine δ - Ni3Nb precipitates. It is shown that CALPHAD-based Scheil model simulations predicted the formation of different precipitate phases for each composition. The novel protocols presented in this paper open new avenues for high throughput material explorations for additive manufacturing.

2-step Bayesian estimation↗

Anticipated Improvements in Precipitation Physics and Understanding of Water Cycle from GPM Mission

The GPM mission is currently planned for start in the late-2007 to early-2008 time frame. Its main scientific goal is to help answer pressing scientific problems arising within the context of global and regional water cycles. These problems cut across a hierarchy of scales and include climate-water cycle interactions, techniques for improving weather and climate predictions, and better methods for combining observed precipitation with hydrometeorological prediction models for applications to hazardous flood-producing storms, seasonal flood/draught conditions, and fresh water resource assessments. The GPM mission will expand the scope of precipitation measurement through the use of a constellation of some 9 satellites, one of which will be an advanced TRMM-like core satellite carrying a dual-frequency Ku-Ka band precipitation radar and an advanced, multifrequency passive microwave radiometer with vertical-horizontal polarization discrimination. The other constellation members will include new dedicated satellites and co-existing operational/research satellites carrying similar (but not identical) passive microwave radiometers. The goal of the constellation is to achieve approximately 3-hour sampling at any spot on the globe -- continuously. The constellation s orbit architecture will consist of a mix of sun-synchronous and non-sun-synchronous satellites with the core satellite providing measurements of cloud-precipitation microphysical processes plus calibration-quality rainrate retrievals to be used with the other retrieval information to ensure bias-free constellation coverage. GPM is organized internationally, involving existing, pending, projected, and under-study partnerships which will link NASA and NOAA in the US, NASDA in Japan, ESA in Europe, ISRO in India, CNES in France, and possibly AS1 in Italy, KARI in South Korea, CSA in Canada, and AEB in Brazil. Additionally, the program is actively pursuing agreements with other international collaborators and domestic scientific agencies and institutions, as well as participation by individual scientists from academia, government, and the private sector to fulfill mission goals and to pave the way for what is expected to become an internationally-organized operational global precipitation observing system. Notably, the broad societal applications of GPM are reflected in the United Nation s identification of GPM as a foremost candidate for its Peaceful Uses of Space Program. An overview of the GPM mission design is given, followed by an explanation of its scientific agenda as an outgrowth of making improvements in rain retrieval accuracy, microphysics dexterity, sampling frequency, and global coverage. All of these improvements offer new means to observe variability in precipitation and water cycle fluxes and to achieve improved predictability of weather, climate, and hydrometeorology. Specifically, the scientific agenda of GPM has been designed to leverage the measurement improvements to improve prognostic model performance, particularly quantitative precipitation forecasting and its linked phenomena at short, intermediate, and extended time scales. The talk addresses how GPM measurements will enable better detection of accelerations and decelerations in regional and global water cycle processes and their relationship to climate variability, better impacts of precipitation data assimilation on numerical weather prediction and global climate reanalysis, and better performance from basin scale hydrometeorological models for short and long term flood-drought forecasting and seasonal fresh water resource assessment. These improvements become possible by using more accurate, more microphysically-centric, more frequent, and fully global precipitation observations to achieve better water budget closure and to provide more realistic forcing and assessment of prediction models.

Smith, Eric A.↗

A 3-dimensional numerical simulation of the atmospheric injection of aerosols by a hypothetical basaltic fissure eruption

Researchers simulated the atmospheric response to a hypothetical basaltic fissure eruption using heating rates based on the Roza flow eruption. The simulation employs the Colorado State University Regional Atmospheric Model (RAMS) with scavenging effects. The numerical model is a three-dimensional non-hydrostatic time-split compressible cloud/mesoscale model. Explicit microphysics include prediction of cloud, rain, crystal, and hail precipitation types. Nucleation and phoretic scavenging are predicted assuming that the pollutant makes an effective cloud droplet nucleus. Smoke is carried as a passive tracer. Long and short wave radiation heating tendencies, including the effects of the smoke, are parameterized. The longwave emission by the lava surface is neglected in the parameterization and included as an explicit heating term instead. A regional scale domain of 100 x 100 km in the horizontal and 22 km high is used. The horizontal grid spacing is taken to be 2 km and the vertical spacing is taken to be 0.75 km. The initial atmospheric state is taken to be horizontally homogenous and based on the standard atmospheric sounding. The fissure is assumed to be 90 km long and oriented in a zig/zag pattern.

Tripoli, Gregory J.↗

Sensitivity of modeled Indian monsoon to Chinese and Indian aerosol emissions

The South Asian summer monsoon supplies over 80 % of India's precipitation. Industrialization over the past few decades has resulted in severe aerosol pollution in India. Understanding monsoonal sensitivity to aerosol emissions in general circulation models (GCMs) could improve predictability of observed future precipitation changes. The aims here are (1) to assess the role of aerosols in India's monsoon precipitation and (2) to determine the roles of local and regional emissions. For (1), we study the Precipitation Driver Response Model Intercomparison Project experiments. We find that the precipitation response to changes in black carbon is highly uncertain with a large intermodel spread due in part to model differences in simulating changes in cloud vertical profiles. Effects from sulfate are clearer; increased sulfate reduces Indian precipitation, a consistency through all of the models studied here. For (2), we study bespoke simulations, with reduced Chinese and/or Indian emissions in three GCMs. A significant increase in precipitation (up to ∼20 %) is found only when both countries' sulfur emissions are regulated, which has been driven in large part by dynamic shifts in the location of convective regions in India. These changes have the potential to restore a portion of the precipitation losses induced by sulfate forcing over the last few decades.

Indian monsoons↗

Exploring the Predictability of the High-Energy Tail of MEE Precipitation Based on Solar Wind Properties

Medium Energy Electron (MEE) precipitation (≳30 keV) ionizes the mesosphere and initiates chemical reactions, which ultimately can reduce mesospheric and stratospheric ozone. Currently, there are considerable differences in how existing parameterizations represent flux response, timing, and duration of MEE precipitation, especially considering its high-energy tail (≳300 keV). This study compares the nature of ≳300 to ≳30 keV electron fluxes to better understand differences within MEE precipitation. The MEE fluxes are estimated from measurements by the Medium Energy Proton and Electron Detector (MEPED) onboard the Polar Orbiting Environmental Satellite (POES) from 2004 to 2014. The fluxes are explored in the context of solar wind drivers: corotating high-speed solar wind streams (HSSs) and coronal mass ejections (CMEs) alongside their associated solar wind properties. Three key aspects of ≳300 keV electron fluxes are investigated: maximum response, peak timing, and duration. The results reveal a structure-dependent correlation (0.89) between the peak fluxes of ≳30 and ≳300 keV electrons. The epsilon coupling function correlates well (0.84) with the ≳300 keV peak flux, independent of solar wind structure. The ≳300 keV flux peaks 0–3 days after the ≳30 keV flux peaks. The highest probability (∼42%) occurs for a 1-day delay, while predictive capabilities increase when accounting for solar wind speed. The ≳300 keV flux response has the highest probability of lasting 4 days for both CMEs and HSSs. The results form a base for a stochastic MEE parameterization that goes beyond the average picture, enabling realistic flux variability on both daily and decadal scales.

J A Salice↗

Monitoring Intense Thunderstorms in the Hindu-Kush Himalayan Region

Some of the most extreme thunderstorms on the planet routinely occur in the Hindu-Kush Himalaya (HKH) region— where many government organizations lack the resources needed to fully assess the risk associated with hazards that result from high impact convective weather. This project combines innovative numerical weather prediction, satellite-based precipitation and land imagery techniques into a high impact weather assessment tool kit (HIWAT) that is building the capabilities of national meteorological departments and other weather sensitive agencies in the HKH region to predict, observe and effectively respond to threats and impacts posed by thunderstorms that affect the region, thereby enhancing extreme weather resilience in the region.

extreme weather↗

Evaluation of present-day extreme precipitation over the United States: an inter-comparison of convection and dynamic permitting configurations of E3SMv1

Abstract Accurate simulation of the present-day characteristics of mean and extreme precipitation at regional scales remains a challenge for Earth system models, which is due in part to deficiencies in model physics such as convective parameterization (CP), and coarse resolution. High horizontal resolution (HR, ∼25 km) and multiscale modeling framework (MMF, i.e. replacing conventional CP with embedded km-scale cloud-resolving models) are two promising directions that could help improve the interaction between subgrid-scale physical processes and large-scale climate. Here, we evaluate simulated extreme precipitation over the United States (US) across three configurations (i.e. low-resolution [LR], HR, and MMF) of the Energy Exascale Earth System Model (E3SMv1) and intercompare them against two gridded observation datasets (climate prediction center daily US precipitation and integrated multi-satellite retrievals for global precipitation measurement). We assess the model’s ability to simulate very heavy seasonal precipitation (illustrated by the difference between the 99th and 90th percentile values) as well as the spatial distributions of several extreme precipitation indices defined by the expert team on climate change detection and indices. Our results show that both the dry (i.e. consecutive dry days (CDD)) and wet (i.e. consecutive wet days, maximum 5 day precipitation, and very wet days) extremes evaluated herein show some improvement as well as degradation with MMF and HR relative to LR. These results vary across seasons and US subregions. For instance, only the very heavy precipitation of winter is improved with MMF and HR. Both configurations alleviate the well-known drizzling bias evident in LR across both winter and summer in many parts of the US, largely due to the overall improvement in intensity and frequency of precipitation. Additionally, our results suggest that while E3SMv1-MMF has higher intensity rates when it does rain, it has too many CDD during the summer, contributing to a low mean precipitation bias.

54 ENVIRONMENTAL SCIENCES↗

Enhancing Resilience of Urban Systems Against Climate-Induced Floods Using Advanced Data-Driven and Computing Techniques: A Driver-Pressure-State-Impact-Response (DPSIR) Framework

Focal Area: This white paper proposes advanced data-driven and computing techniques to improve the predictability of extreme climate events (precipitation) and focuses on comprehending their impact dynamics to enhance resilience of urban systems. Science Challenge: In urban systems, climate change has presented significant challenges related to accurate spatiotemporal prediction of extreme climate events (heavy precipitation) and their impacts, i.e. flooding. The occurrence of extreme climate events and their compounding repercussions on the built environment make urban systems increasingly more vulnerable. The interactions between extreme climate events, urban systems, and the corresponding impacts are irregular, non-linear, and dynamic, making it difficult to standardize resilience. As it stands, the management of complex urban systems is affected by uncertainties related to the nature of short- and long-term consequences caused by extreme events.

54 ENVIRONMENTAL SCIENCES↗

Linking the subseasonal variability of the East Asia winter monsoon and the Madden-Julian Oscillation through wave disturbances along the subtropical jet

Despite an urgent demand for reliable subseasonal-to-seasonal (S2S) predictions to guide disaster preparedness, our current climate models show limited S2S prediction skill, particularly for precipitation, due to an inadequate understanding of the key processes that drive regional S2S variability. Here we demonstrate that the leading subseasonal variability mode of precipitation over the East Asian Winter Monsoon (EAWM) region is not only closely tied to the activity of the Madden-Julian Oscillation (MJO), but also linked to precipitation and temperature extremes worldwide, influenced by a circumglobal Rossby wave-train along the subtropical westerly jet. Despite a close phase-lock relationship between the MJO and subseasonal EAWM precipitation, our findings indicate that the MJO itself may only play a minor role in the subseasonal EAWM variability. Given its significant impact on the S2S variability of global weather extremes, we call for coordinated community efforts to enhance the understanding and prediction of the circumglobal Rossby wave-train.

Atmospheric science↗

Contribution of Soil Moisture Information to Streamflow Prediction in the Snowmelt Season: A Continental-Scale Analysis

In areas dominated by winter snowcover, the prediction of streamflow during the snowmelt season may benefit from three pieces of information: (i) the accurate prediction of weather variability (precipitation, etc.) leading up to and during the snowmelt season, (ii) estimates of the amount of snow present during the winter season, and (iii) estimates of the amount of soil moisture underlying the snowpack during the winter season. The importance of accurate meteorological predictions and wintertime snow estimates is obvious. The contribution of soil moisture to streamflow prediction is more subtle yet potentially very important. If the soil is dry below the snowpack, a significant fraction of the snowmelt may be lost to streamflow and potential reservoir storage, since it may infiltrate the soil instead for later evaporation. Such evaporative losses are presumably smaller if the soil below the snowpack is wet. In this paper, we use a state-of-the-art land surface model to quantify the contribution of wintertime snow and soil moisture information -- both together and separately -- to skill in forecasting springtime streamflow. We find that soil moisture information indeed contributes significantly to streamflow prediction skill.

Reichle, Rolf↗

New insights on the effects of chemistry and temperature on α’ precipitation during aging of FeCrAl alloys

Here, the effect of Al on α' precipitation in FeCrAl alloys was studied through thermal aging of several model binary FeCr and FeCrAl alloys with Cr content of 13 wt.%, 17 wt.%, and 25 wt.% with and without 5.5 wt.% Al. Aging was performed up to 1,000h at varying temperatures from 400-500°C. At 400°C no age hardening was observed due to slow kinetics at this temperature. For both the 17Cr and 25Cr alloys, the addition of Al shows a lowering of the miscibility gap, consistent with other reports in literature. Interestingly, however, for the 25Cr alloys the addition of Al in the FeCrAl ternary alloy accelerated α' precipitation below the miscibility gap. Such enhanced precipitation has also been predicted by our atomistic kinetic Monte Carlo (AKMC) simulations. While previous literature has often focused on Al suppressing α', here we show that while Al can lower the miscibility gap in the Fe-Cr ferritic system thermodynamically, it may also enhance the kinetics of precipitation.

36 MATERIALS SCIENCE↗

Convective Biases in the US DOE Global Storm‐Resolving Model: Insights From Regionally Refined Simulations During the CACTI Campaign

Accurately simulating convective processes in complex terrain remains a critical challenge for global storm-resolving models (GSRMs). This study systematically evaluates moist convective biases in the Regionally Refined Mesh configuration of the U.S. Department of Energy Simple Cloud-Resolving E3SM Atmosphere Model (RRM-SCREAM) using comprehensive observations and large-eddy simulations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) campaign in the mountainous area of central Argentina. Comparisons of simulations with high-resolution observations and reanalysis data indicate that RRM-SCREAM effectively captures large-scale meteorological patterns, including regional atmospheric gradients and diurnal variability. However, RRM-SCREAM disproportionately produces smaller precipitation clusters referred to as “popcorn convection,” and exaggerated rainfall intensities compared to observations and reference models. Detailed examination of a representative orographic shallow-to-deep convective transition case shows that RRM-SCREAM delays initial shallow convection growth due to lower-tropospheric dryness and sustained convective inhibition, but once triggered, deep convection becomes overly vigorous with excessively strong vertical velocities and elevated cloud ice content, linked to a thermodynamic structure characterized by suppressed low-level moistening and excessive upper-level moisture retention. Our results highlight specific deficiencies in the model representation of convective vertical velocity, cloud microphysical processes, and convective precipitation organization within RRM-SCREAM. Addressing these biases is essential for improving the predictions of convective clouds and precipitation in the global high-resolution atmospheric models.

Su, Tianning [Lawrence Livermore National Laborato↗

Soil Moisture and Mesoscale Convective Complex Development During the 1993 US Midwest Flood: Results from the MM5-PLACE Atmosphere/Land-Surface Model

The 1993 US Midwest Flood produced record levels of flooding, in the Mississippi River Basin. This flooding resulted from repeated frontal passages and mesoscale convective complexes (MCCs) during the months of June and July. A better understanding of processes that influenced MCC development during the 1993 Flood may lead to improved forecasts of heavy precipitation and flooding. Here, we consider the impact of soil moisture on MCC development during a two-day period (June 23-24) of the 1993 US Midwest Flood. The purpose of this study is to assess the importance of soil moisture distribution on the timing, intensity, and location of heavy precipitation. In this study, the MM5-PLACE Atmosphere/Land-Surface Model is utilized. The atmospheric component consists of the Penn State/NCAR MM5 mesoscale model, and the land-surface component consists of the Goddard Parameterization for Land Atmosphere-Cloud Exchange (PLACE). Initial soil moisture is provided from two sources: 1) NCEP reanalysis, and 2) Antecedent Precipitation Index (API) using NOAA rain gauge measurements as a proxy for soil moisture. NCEP reanalysis provides coarse resolution initial soil moisture (2.5 degree), while API provides high resolution initial soil moisture (10-200 km depending on NOAA rain gauge spacing). Initial results indicate that the distribution of soil moisture has a significant impact on the timing and location of heavy precipitation during this two-day flood event. Precipitation in simulations with high resolution initial soil moisture agrees more closely with observed precipitation. These results suggest that high resolution soil moisture observations are necessary to accurately predict severe storm development, heavy precipitation, and subsequent flooding.

Baker, R. David↗

Assessing the Impact of Pre-gpm Microwave Precipitation Observations in the Goddard WRF Ensemble Data Assimilation System

The forthcoming Global Precipitation Measurement (GPM) Mission will provide next generation precipitation observations from a constellation of satellites. Since precipitation by nature has large variability and low predictability at cloud-resolving scales, the impact of precipitation data on the skills of mesoscale numerical weather prediction (NWP) is largely affected by the characterization of background and observation errors and the representation of nonlinear cloud/precipitation physics in an NWP data assimilation system. We present a data impact study on the assimilation of precipitation-affected microwave (MW) radiances from a pre-GPM satellite constellation using the Goddard WRF Ensemble Data Assimilation System (Goddard WRF-EDAS). A series of assimilation experiments are carried out in a Weather Research Forecast (WRF) model domain of 9 km resolution in western Europe. Sensitivities to observation error specifications, background error covariance estimated from ensemble forecasts with different ensemble sizes, and MW channel selections are examined through single-observation assimilation experiments. An empirical bias correction for precipitation-affected MW radiances is developed based on the statistics of radiance innovations in rainy areas. The data impact is assessed by full data assimilation cycling experiments for a storm event that occurred in France in September 2010. Results show that the assimilation of MW precipitation observations from a satellite constellation mimicking GPM has a positive impact on the accumulated rain forecasts verified with surface radar rain estimates. The case-study on a convective storm also reveals that the accuracy of ensemble-based background error covariance is limited by sampling errors and model errors such as precipitation displacement and unresolved convective scale instability.

microwave observations↗