Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Developing Benzodithiophene-Free donor polymer for 19.36% efficiency Green-Solvent-Processable organic solar cells

Here, in this work, a newly benzodithiophene-free D-A polymer donor, named PDTP-BDD, was developed for realizing green-solvent processed high-performance OSCs. By bridging two electron-rich unit of dithieno[3,2-b:2',3'-d]pyridin-5(4H)-one (DTP) and electron-deficient benzo[1,2-c:4,5c']dithiophene-4,8-dione (BDD) with thiophene units, PDTP-BDD possesses high absorption in the short wavelength range and a deep HOMO energy level. The rigid building blocks also make PDTP-BDD has strong aggregation and poor solubility in common halogen-free solvents (such as o-xylene) at room temperature, but it is readily dissolved and disaggregated at high temperature (120 °C). After cooling down to a lower temperature (60 °C), PDTP-BDD self-assembled and pre-aggregated slowly in the solution at a long time. By employing a delayed processing strategy in the layer-by-layer processed OSCs (LbL-OSCs), an optimized fibril network of the underling layer was realized, enabling the permeation of acceptor into the donor network. The optimized PDTP-BDD/L8-BO-based LbL-OSCs realized a high PCE of 18.42 %. By adding a small amount of D18 to further optimize the PDTP-BDD fibril network, an impressive PCE of 19.36 % was achieved finally in the resulting ternary LbL-OSCs, which is the highest value for OSCs processed by halogen-free solvents.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Design and Gas Separation Performance of Imidazolium Poly(ILs) Containing Multivalent Imidazolium Fillers and Crosslinking Agents

This work introduces a series of vinyl-imidazolium-based polyelectrolyte composites, which were structurally modified via impregnation with multivalent imidazolium-benzene ionic liquids (ILs) or crosslinked with novel cationic crosslinkers which possess internal imidazolium cations and vinylimidazolium cations at the periphery. A set of eight [C4vim][Tf2N]-based membranes were prepared via UV-initiated free radical polymerization, including four composites containing di-, tri-, tetra-, and hexa-imidazolium benzene ILs and four crosslinked derivatives which utilized tri- and tetra- vinylimidazolium benzene crosslinking agents. Structural and functional characterizations were performed, and pure gas permeation data were collected to better understand the effects of “free” ILs dispersed in the polymeric matrix versus integrated ionic crosslinks on the transport behaviors of these thin films. These imidazolium PIL:IL composites exhibited moderately high CO2 permeabilities (~20–40 Barrer), a 4–7× increase relative to corresponding neat PIL, with excellent selectivities against N2 or CH4. The addition of imidazolium-benzene fillers with increased imidazolium content were shown to correspondingly enhance CO2 solubility (di- < tri- < tetra- < hexa-), with the [C4vim][Tf2N]: [Hexa(Im+)Benz ][Tf2N] composite showing the highest CO2 permeability (PCO2 = 38.4 Barrer), while maintaining modest selectivities (αCO2/CH4 = 20.2, αCO2/N2 = 23.6). Additionally, these metrics were similarly improved with the integration of more ionic content bonded to the polymeric matrix; increased PCO2 with increased wt% of the tri- and tetra-vinylimidazolium benzene crosslinking agent was observed. This study demonstrates the intriguing interactions and effects of ionic additives or crosslinkers within a PIL matrix, revealing the potential for the tuning of the properties and transport behaviors of ionic polymers using ionic liquid-inspired small molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Formation Mechanism of Flower-like Polyacrylonitrile Particles

Flower-like polyacrylonitrile (PAN) particles have shown promising performance for numerous applications, including sensors, catalysis, and energy storage. However, the detailed formation process of these unique structures during polymerization has not been investigated. Here, we elucidate the formation process of flower-like PAN particles through a series of in situ and ex situ experiments. We have the following key findings. First, lamellar petals within the flower-like particles were predominantly orthorhombic PAN crystals. Second, branching of the lamellae during the particle formation arose from PAN's fast nucleation and growth on pre-existing PAN crystals, which was driven by the poor solubility of PAN in the reaction solvent. Third, the particles were formed to maintain a constant center-to-center distance during the reaction. The separation distance was attributed to strong electrostatic repulsion, which resulted in the final particles' spherical shape and uniform size. Lastly, we employed the understanding of the formation mechanism to tune the PAN particles' morphology using several experimental parameters including incorporating comonomers, changing temperature, adding nucleation seeds, and adjusting the monomer concentration. Here these findings provide important insights into the bottom-up design of advanced nanostructured PAN-based materials and controlled polymer nanostructure self-assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insights into controlling bacterial cellulose nanofiber film properties through balancing thermodynamic interactions and colloidal dynamics

In recent years, nanocellulose has emerged as a sustainable and environmentally friendly alternative to traditional petroleum-derived structural polymers. Sourced either from plants, algae, or bacteria, nanocellulose can be processed into colloid, gel, film and fiber forms. However, the required fundamental understanding of process parameters that govern the morphology and structure–property relationships of nanocellulose systems, from colloidal suspensions to bulk materials, has not been developed and generalized for all forms of cellulose. This further hinders the more widespread adoption of this biopolymer in applications. Our study investigates the dispersion of cellulose nanofibers (CNFs) produced by a bacterial–yeast co-culture, in solvents, highlighting the role of thermodynamic interactions in influencing their colloidal behavior. By adjusting Hansen solubility parameters, we controlled the thermodynamic relationship between CNFs and solvents across various concentrations, studying the dilute to semi-dilute regimes. Rheological measurements revealed that the threshold at which a concentration-based regime transition occurs is distinctly solvent-dependent. Complementing rheological analysis with small angle X-ray scattering and zeta potential measurements, our findings reveal that enhancing CNF–solvent interactions increases excluded volume in the dilute regime, emphasizing the importance of the balance between fiber–fiber and fiber–solvent interactions. Moreover, we investigated the transition from colloidal to solid state by creating films from dispersions with varying interaction parameters in semi-dilute regimes. Through mechanical testing and scanning electron microscopy imaging of the fracture surfaces, we highlight the significance of electrokinetic effects in such transitions, as dispersions with higher electrokinetic stabilization gave rise to stronger and tougher films despite having less favorable thermodynamic interaction parameters. Finally, our work provides insights into the thermodynamic and electrokinetic interplay that governs bacterial CNF dispersion, offering a foundation for future application and a deeper understanding of nanocellulose's colloidal and structure-property relationships.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Weather aging effects on modified asphalt with rubber-polyethylene composites

Weather aging may cause more severe degradation on asphalt than thermal-oxidative aging due to the synergistic effect among oxygen, heat, ultraviolet (UV) radiation, and moisture. This study aimed to investigate weather aging effects and anti-aging mechanisms on asphalt modified with rubber-polyethylene (PE) composites. The modified binder blends and asphalt mixtures were subjected to outdoor weather aging. Dynamic shear rheometer (DSR), Fourier transform infrared spectroscopy (FTIR), Gel permeation chromatography (GPC), and optical microscopy tests were adopted to characterize the rheological properties, aging resistance, polymer degradation, and anti-aging mechanisms of modified binder blends, respectively. Mixture performance tests including Asphalt Pavement Analyzer (APA) and Ideal-CT tests were used to evaluate rutting and cracking resistance of asphalt mixtures. Results showed that weather aging can cause more severe aging to asphalt binders than pressure aging vessel (PAV) due to the severe degradation of PE particles. Rubber-PE composites alloyed with an extruder proved to stabilize PE particles in asphalt and significantly improve the aging resistance of modified binder blends. Furthermore, the enhanced aging resistance is attributed to the dispersion of PE particles and carbon black released by soluble rubbers.

Aging resistance↗
DOE OSTI2020

Structure and composition of blueberry fiber pectin and xyloglucan that bind anthocyanins during fruit puree processing

Blueberry is a well-known source of antioxidants and prebiotic dietary fiber yet the fate of these health-beneficial ingredients during fruit processing it is not understood. Detailed composition and structure of blueberry pomace (PF) remaining after commercial blueberry fruit puree processing, as well as the water soluble and water insoluble fractions, were determined. The PF was comprised of dietary fiber (60.8%) that was largely insoluble (46.2% vs. 14.6% soluble dietary fiber) pectin, xyloglucan, arabinoxylan and mannan polysaccharides, fructose (11.22%) and glucose (10.37%) free sugars, protein (9%), fat (5%), and anthocyanins (6444.5 μg/g). The most abundant anthocyanins detected in PF were malvidin 3-arabinoside and peonidin 3-glucoside and the pectin was determined to be methyl-esterified and acetylated rhamnogalacturonan I with a 4,5-unsaturated function at the non-reducing end based on oligosaccharide structural analysis. Blueberry PF xyloglucan oligosaccharide side chain structures included xylose, arabinose and galactose consistent with arabino-xyloglucan structure. Additionally, microwave-assisted extraction of blueberry PF (pH 2 for 10 min at 80 °C) was performed to more clearly elucidate pectin structure, and revealed a pectin polymer with high molar mass (1072 kDa) and viscosity that was dependent upon the molar mass. A random coil shape was confirmed for both the blueberry PF and microwave extracted blueberry pectin, which agreed with previous reports that flexible blueberry pectin contributes to strong anthocyanin binding. In summary, the blueberry pomace anthocyanin content was slightly higher than that reported for fresh whole blueberry fruit, which suggests that most blueberry anthocyanins adhered to the pomace fiber, and most likely the insoluble pectin, during and after processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Proton Conducting Sulfonated Poly(Ionic Liquid) Block Copolymers

Herein, we report the synthesis of proton-conducting sulfonated poly(ionic liquid) block copolymers (S-PILBCPs) containing one block with sulfonic acid (sulfonated styrene, SS) and the other with an IL moiety (vinylbenzylmethylimidazolium bis(trifluoromethylsulfonyl)imide, VBMIm-TFSI) using reversible addition–fragmentation chain-transfer (RAFT) polymerization and post-polymerization modifications (i.e., functionalization, anion exchange reactions, and sulfonation). The S-PILBCPs uniquely conjoin the SS block with mobile protons (H + ) and the PIL block with mobile anions (TFSI – ), where multiple highly desired properties, including high proton conductivity (from the SS block), and high IL-philicity and oxygen solubility (from the PIL block) can exist compartmentally within a microphase separated morphology (evidenced by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS)). High ion conductivity of 79.7 mS/cm at a PIL block composition of 21.6 mol % was observed at 80 °C and 90% relative humidity (RH) (comparable to the benchmark Nafion ionomer). This work successfully demonstrates the design of S-PILBCPs as a new material platform and showcases its promise as an ionomer for proton exchange membrane fuel cells (PEMFCs) as they simultaneously and compartmentally combine proton conductivity and oxygen solubility. Furthermore, these benefits have recently been leveraged to achieve substantial improvement in oxygen reduction reaction (ORR) activity and subsequently fuel cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

BETO 2021 Peer Review - Improving Formate Upgrading by Cupriavidus Necator 2.3.2.111

Formate can be generated by electrocatalytic reduction of CO2 and has been proposed as a soluble intermediate for the storage of carbon and energy. Biological systems capable of assimilating formate could enable conversion of formate generated from low-cost renewable energy and waste CO2 to myriad fuels and chemicals. To that end, the goal of this project is to develop the natural formatotroph Cupriavidus necator as a robust microbial chassis for efficient conversion of formate to value-added products. Using a combination of laboratory evolution and rational engineering, we have identified mutations and genetic deletions that improve its growth rate and biomass yield on formate by 1.2X. Using RNA-seq transcriptomics, we are elucidating the mechanisms that underly these improvements and anticipate this will contribute to our understanding of formate conversion. We have also engineered C. necator to convert formate to the potential polymer precursor 2-hydroxymuconate semialdehyde (2HMS) by introducing an exogenous pathway and deleting competing pathways and demonstrated production and robust growth using a pH-stat bioreactor. Final techno-economic analysis and life-cycle assessment on biological production of 2HMS from formate will enable the DOE and other stake holders to evaluate the economic and environmental impact of this project and related technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Mechanically robust hydrophobized double network hydrogels and their fundamental salt transport properties

Abstract Water swollen polymer networks are attractive for applications ranging from tissue regeneration to water purification. For water purification, charged polymers provide excellent ion separation properties. However, many ion exchange membranes (IEMs) are brittle, necessitating the use of thick support materials that ultimately decrease throughput. To this end, novel double network hydrogels (DNHs) with variable water content are prepared and characterized in terms of mechanical and ion transport properties to evaluate their potential utility as tough membrane materials. The first network contains fixed anionic charges, while the other is comprised of a copolymer with varied ratios of hydrophobic ethyl acrylate (EA) and hydrophilic dimethyl acrylamide (DMA) repeat units. Characterization of freestanding DNH films reveals a reduction in water content from 88 to 53 wt% and a simultaneous increase in ultimate stress and strain by ~3.5× and ~4.5×, respectively, for 95%/5% EA/DMA, relative to 100% DMA. Fundamental salt transport properties relevant to water purification, including permeability, solubility, and diffusivity, are measured and systematically compared with conventional membrane materials to inform the development of DNHs for membrane applications. The ability to simultaneously reduce water content and increase mechanical integrity highlights the potential of DNHs as a synthetic platform for future membrane applications.

Allen, Marshall J.↗
DOE OSTI2021

Understanding why poly(acrylic acid) works: decarbonylation and cross-linking provide an ionically conductive passivation layer in silicon anodes

Poly(acrylic acid) (PAA) is commonly used as a binder for fabricating silicon (Si) anode active materials in lithium-ion batteries due to its useful properties including high polar solvent solubility, good rheology, and strong adhesive properties. However, the role and evolution of PAA during electrode fabrication, cycling, and calendar aging are not well understood. In this work, we reveal the evolution of PAA during electrode curing and relate its chemical change to the final electrode properties and performance. These studies are made possible using two types of in situ attenuated total reflectance-infrared Fourier transform (ATR-FTIR) spectroscopy: thermal ATR-FTIR to probe the cross-linking reaction, and ATR-FTIR spectroelectrochemistry of three-dimensional composite electrodes, a unique technique developed herein that probes the solvation dynamics of lithium ions at the silicon anode interface under electrochemical polarization. Specifically, we show that PAA undergoes a thermally-mediated, cross-linking decarbonylation reaction to form an ether-based network polymer. To show the importance of the polyether moieties, we synthesize partially esterified PAA analogues that do not undergo this cross-linking decarbonylation reaction and correlate the degree of cross-linking to half-cell performance metrics. Finally, we unveil the mechanism of the polyether binder performance through in situ ATR-FTIR spectroelectrochemistry and show that PAA acts as an interfacial material that conducts lithium-ions, limits solvent molecule access to the Si surface, and stabilizes the electrode against parasitic lithium inventory loss at high state of charge for an extended period of time.

25 ENERGY STORAGE↗
DOE OSTI2020

Revealing the working mechanism of a multi-functional block copolymer binder for lithium-sulfur batteries

The lithium-sulfur (Li-S) battery is one of the most promising substitutes for current energy storage systems because of its low cost, high theoretical capacity, and high energy density. However, the high solubility of intermediate products (i.e., lithium polysulfides) and the resultant shuttle effect lead to rapidly fading capacity and a low coulombic efficiency, which hinder the practical application of Li-S batteries. In this study, block copolymers are constructed with both an ethylene oxide unit and a styrene unit and then used as binders for Li-S batteries. Electrochemical performance improvements are attributed to the synergistic effects contributed by the different units of the block copolymer. Here, the ethylene oxide unit traps polysulfide, which bonds strongly with the intermediate lithium polysulfide, and enhances the transport of lithium ions to reach high capacity. Meanwhile, the styrene unit maintains cathode integrity by improving the mechanical properties and elasticity of the constructed block copolymer to accommodate the large volume changes. By enabling multiple functions via different units in the polymer chain, high sulfur utilization is achieved, polysulfide diffusion is confined, and the shuttle effect is suppressed during the cycle life of Li-S batteries, as revealed by operando ultraviolet–visible spectroscopy and S K-edge X-ray absorption spectroscopy.

25 ENERGY STORAGE↗
DOE OSTI2023

High-Throughput Characterization and Optimization of Polyamide Hydrolase Activity Using Open Port Sampling Interface Mass Spectrometry

Enzymatic biodegradation of polymers, such as polyamides (PA), has the potential to cost-effectively reduce plastic waste, but enhancements in degradation efficiency are needed. Engineering enzymes through directed evolution is one pathway toward identification of critical domains needed for improving activity. However, screening such enzymatic libraries (100s-to-1000s of samples) is time-consuming. Here we demonstrate the use of robotic autosampler (PAL) and immediate drop on demand technology (I.DOT) liquid handling systems coupled with open-port sampling interface-mass spectrometry (OPSI-MS) to screen for PA6 and PA66 hydrolysis by 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC) in a high-throughput (8–20 s/sample) manner. The OPSI-MS technique required minimal sample preparation and was amenable to 96-well plate formats for automated processing. Enzymatic hydrolysis of PA characteristically produced soluble linear oligomer products that could be identified by OPSI-MS. Incubation temperatures and times were optimized for PA6 (65 °C, 24 h) and PA66 (75 °C, 24 h) over 108 experiments. In addition, the I.DOT/OPSI-MS quantified production of PA6 linear dimer (8.3 ± 1.6 μg/mL) and PA66 linear monomer (13.5 ± 1.5 μg/mL) by NylC with a lower limit of detection of 0.029 and 0.032 μg/mL, respectively. For PA6 and PA66, linear oligomer production corresponded to 0.096 ± 0.018% and 0.204 ± 0.028% conversion of dry pellet mass, respectively. The developed methodology is expected to be utilized to assess enzymatic hydrolysis of engineered enzyme libraries, comprising hundreds to thousands of individual samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Direct Conversion of Delignified Biomass into Non-Volatile Products Using Thermophilic Bacteria

Butyric acid (BA) can be used as a platform intermediate for diesel and sustainable aviation fuels (SAFs) as well as a precursor for diverse commodity chemicals for the production of polymers, fibers, solvents, and preservatives. This work presents a co-culture-based bioprocess for the production of BA from corn stover by two thermophilic bacteria, Clostridium thermocellum, a well-known efficient degrader of insoluble and oligomeric cellulosic substrates, and Clostridium thermobutyricum, a highly efficient BA producer from monomeric sugars. First, we tested the capability of C. thermocellum to deconstruct three different biomass streams from the NREL pilot plant pretreatment process -raw, deacetylated, and deacetylated and mechanically refined corn stover (DMR)-, and up to 82% solids deconstruction and 91% carbohydrate utilization were obtained when using DMR solids. Then, the sugar utilization and by-product formation capabilities on various substrates by C. thermobutyricum were compared to evaluate its potential as a co-culture partner for C. thermocellum. Model carbon sources -glucose and xylose- were compared to a mixture of substrates present in soluble DMR hydrolysate streams, and the highest cell density as well as the maximum BA titer (8.3 g/L) were observed on DMR hydrolysate. Finally, clostridial co-cultivations on DMR solids were performed to investigate the inoculation time for both organisms that enhances BA production; while C. thermocellum was always inoculated at the beginning of the cultivation, C. thermobutyricum was inoculated at 0, 36, or 72h. It was found that BA production begins immediately upon inoculation of C. thermobutyricum regardless of the inoculation time. However, higher solids deconstruction and carbohydrate utilization results (83.7 and 95.6%, respectively) were obtained when both organisms were inoculated at the beginning of the fermentation. Under those conditions, up to 2.6 g/L of BA were obtained from DMR solids after 120h of cultivation. This work provides relevant information for the sustainable production of BA using thermophilic bacteria.

bacterial co-culture↗
DOE OSTI2023

Comparison of the Chemical Composition of Liquids from the Pyrolysis and Hydrothermal Liquefaction of Lignocellulosic Materials

Major differences in thermal stability and hydrotreatment behavior of HTL and pyrolysis oils have been reported in the literature. However, little is known about the variations in the chemical composition of these oils that could explain such differences. Two commercial wood pyrolysis oils (Pyrovac and BTG), and their water-soluble (WS) and water-insoluble fractions (WIS) were analyzed and compared with the aqueous (WS WD-57 ) and oily (WIS WS-57 ) fractions obtained from hydrothermal liquefaction (HTL) of Douglas-fir. The samples were characterized by GC/MS, Karl Fischer titration, carbonyl content, total acid number, elemental composition, calorific value, proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Folin-Ciocalteu (FC), and UV fluorescence. All the fractions were also analyzed by Fourier Transform Ion Cyclotron Resonance Mass Spectroscopy (FT-ICR-MS) and by Electrospray Ionization (EI). The most prevalent class of compounds in the water insoluble phases were phenols derived from lignin. Water-soluble phases contain mostly the oxygenated compounds derived from cellulose and hemicellulose and were richer in carbonyl functional groups. The water content of the resulting aqueous phases were between: 65 (WS BTG ) and 96 (WS Pyrovac ) wt. %. The bio-oil from BTG has higher water content and lower HHV, compared to Pyrovac oil. The GC/MS results of BTG oil show the presence of a more prominent acetic acid peak and higher TAN number than the Pyrovac oil. The GC/MS of Pyrovac oil showed more obvious mono-phenol peaks. The quantification of this family by Folin-Ciocalteu method confirmed higher content of monophenolic compounds compared with the BTG oil. The lower thermal stability of pyrolysis oils compared with HTL biocrudes can be partially explained by the fact that pyrolysis oils (BTG and Pyrovac) contain carbohydrates while HTL biocrude (WIS WD-57 ) doesn’t. Thus, we decided to further investigate the chemical differences between the phenolic rich fractions insoluble in water and the holocellulose derived compounds soluble in water. Even after water extraction, the acid content of the water insoluble fraction from BTG (WISBTG) was higher than the acid content of the water insoluble fraction obtained by HTL (WISWSD-57). Likewise, the acid content of the aqueous phases derived from pyrolysis oils (WS Pyrovac , WS BTG ) was also higher than for the aqueous phase obtained by HTL (WSWSD-57). This result is in part due to the use of bases in the HTL process that neutralizes the acid formed in that process. Moreover, the starting feedstock may also influence the differences between the oils. Although, the UV-Fluorescence spectra, ICR-MS and the EI analyses showed some minor differences in the molecular weight and chemical make-up of the oligomers soluble and insoluble in water from pyrolysis and HTL; the differences observed were not large enough to justify the differences in behavior between these oils reported in the literature. Our results suggest that the differences observed between HTL biocrudes and pyrolysis oils are likely partially due to the presence of holocellulose derived products in the pyrolysis oils and higher acid contents.

09 BIOMASS FUELS↗
DOE OSTI2024

High-resolution chemical patterns from negative tone resists for the integration of extreme ultraviolet patterns of metal-oxide resists with directed self-assembly of block copolymers

Extreme ultraviolet (EUV) lithography faces significant challenges in designing suitable resist materials that can provide adequate precision, while maintaining economically viable throughput. These challenges in resist materials have led to printing failures and high roughness in EUV patterns, compromising the performance of semiconductor devices. Integrating directed self-assembly (DSA) of block copolymers (BCPs) with EUV lithography offers a promising solution because, while the BCPs register to the EUV-defined chemical guiding pattern, the thermodynamically determined structures of the BCPs automatically rectify defects and roughness in the EUV pattern. Despite the superior resolution of metal-oxide EUV resists (MORs), their application to DSA is limited by the difficulty in converting them into chemical patterns that allow effective transfer of the rectified patterns of DSA films into inorganic materials. To address this challenge, this study introduces a novel strategy for fabricating chemical patterns using hydrogen silsesquioxane (HSQ), a high-resolution negative tone inorganic resist, as a model system for MORs. Initially, a sacrificial Cr pattern is generated from HSQ patterns via reactive ion etching. The sacrificial Cr pattern is converted into a chemical pattern by first grafting a water-soluble polyethylene oxide brush onto the substrate, then wet etching the Cr, and finally grafting nonpolar polystyrene brushes. Assembling polystyrene-block-poly(methyl methacrylate) on these patterns results in structures oriented and registered with the underlying pattern, achieving 24 nm full-pitch resolutions. In conclusion, this approach has the potential to integrate MOR patterns into the DSA process, thereby enabling the generation of high-quality sub-10 nm patterns with high-χ BCPs.

Atomic force microscopy↗
DOE OSTI2021

The Reactivity of Polyethylene Microplastics in Water under Low Oxygen Conditions Using Radiation Chemistry

Polyethylene (PE) is an intensely utilized polymer, which has consequently led to it becoming a common environmental contaminant. PE and other plastic waste are known to be highly persistent in surface waters; however, chemical and physical changes do take place over time, dependent mostly on highly variable natural conditions, such as oxygen (O2) availability. Gamma radiation was used to generate reactive oxygen species, namely hydroxyl radicals, in initially aerated aqueous solutions to simulate the natural weathering of microplastics in waters where there are fluctuations and often depletions in dissolved O2. The headspace of the irradiated PE-containing solutions was probed for the formation of degradation products using solid-phase microextraction (SPME) fibers in combination with gas chromatography mass spectrometry (GCMS). The major species detected were n-dodecane, with trace levels of tridecane, 2-dodecanone, and hexadecane, which were believed to be predominately adsorbed in the PE microplastics in excess of their aqueous solubility limits. Surface characterization by Raman spectroscopy and light and dark field microscopy indicated no change in the chemical composition of the irradiated PE microplastics under low O2 to anaerobic conditions. However, morphological changes were observed, indicating radical combination reactions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Water and salt transport properties of pentiptycene-containing sulfonated polysulfones for desalination membrane applications

A series of pentiptycene-containing disulfonated polysulfone copolymers (PENT-BP) were synthesized via condensation polymerization. Water and salt transport properties (solubility, diffusivity and permeability) were characterized for acid-form membranes (PENT-BP(H)) and compared with triptycene-based sulfonated polysulfones (TRP-BP(H)) and a non-iptycene-containing 4,4'-biphenol-based series (BPS(H)) of polysulfones to investigate the effect of pentiptycene on membrane performance. At comparable water content, the PENT-BP(H) exhibited increased water and salt permeability due to the additional free volume introduced by the pentiptycene units. Enhanced water/salt permeability selectivity of PENT-BP(H) series was also observed due to a significantly higher diffusivity selectivity. At comparable water permeance (P w D ~ 8 X 10 -6 cm 2 /s), the salt rejection of PENT-BP (H) copolymers obtained from dead-end filtration reached 91–93% at 400 psi, higher than that of a corresponding BPS(H) series. This study suggests that incorporation of iptycene moieties into polymer backbone is an effective strategy to enhance desalination membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗