Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer melts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Connecting radiation-driven changes in structural, thermal, and mechanical properties in several medical device polymers

Stemming from security threats and shortages in supply, a recent push has emerged to develop alternatives to radioisotope Cobalt-60 gamma radiation for sterilization of polymeric medical products, including electron beam (e-beam) and X-ray machine-based sources. However, before large-scale implementation, the effects of these non-isotope-based methods must be thoroughly investigated from several perspectives, involving their potential detrimental effects on the structural, thermal, and mechanical properties of polymers in medical devices. This paper investigates such effects in commonly used medical device polymers, including polypropylene homopolymer (PPH), polyolefin elastomer (POE), low-density polyethylene (LDPE), acrylonitrile butadiene styrene (ABS), and chlorobutyl rubber (CIIR). To connect radiation-driven changes in polymer structural and thermal properties and corresponding changes in mechanical properties, several characterization techniques were utilized, including gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). We found that the tensile strength of X-ray irradiated PPH, as well as X-ray, e-beam, and gamma irradiated CIIR decreases due to chain scission, which is corroborated by GPC and DMA. The GPC results of LDPE suggest chain scission, but interestingly without a corresponding decline in tensile strength. By comparison, POE and ABS appear to undergo further crosslinking with increasing irradiation dose, which generally strengthens them. Importantly, in the vast majority of the cases, there were small to no changes in properties upon changing radiation technologies (at a given dose), i.e., no radiation source dependence. However, in a few specific cases, radiation method dependencies did arise, for instance, in terms of the molecular weight of PPH being significantly increased upon X-ray irradiation, while the melting temperature, glass transition temperature, and elongation at break reduced compared to gamma. Overall, this study provides valuable insight into radiation-driven chemical and structural changes in polymers that produce changes in physical and functional properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enabling Industrial Re-Use of Large-Format Additive Manufacturing Molding and Tooling

Large-format additive manufacturing (LFAM) is an enabling manufacturing technology capable of producing large parts with highly complex geometries for a wide variety of applications, including automotive, infrastructure/construction, and aerospace mold and tooling. In the past decade, the LFAM industry has seen widespread use of bio-based, glass, and/or carbon fiber reinforced thermoplastic composites which, when printed, serve as a lower-cost alternative to metallic parts. One of the highest-volume materials utilized by the industry is carbon fiber (CF)-filled polycarbonate (PC), which in out-of-autoclave applications can achieve comparable mechanical performance to metal at a significantly lower cost. Previous work has shown that if this material is recovered at various points throughout the manufacturing process for both the lab and pilot scale, it can be mechanically recycled with minimal impacts on the functional performance and printability of the material while significantly reducing the feedstock costs. End-of-life (EOL) CF-PC components were processed through industrial shredding, melt compounding, and LFAM equipment, followed by evaluation of the second-life material properties. Experimental assessments included quantitative analysis of fiber length attrition, polymer molecular weight degradation using gel permeation chromatography (GPC), density changes via pycnometry, thermal performance using dynamic mechanical analysis (DMA), and mechanical performance (tensile properties) in both the X- and Z-directions. Results demonstrated a 24.6% reduction in average fiber length compared to virgin prints, accompanied by a 21% decrease in X-direction tensile strength and a 39% reduction in tensile modulus. Despite these reductions, Z-direction tensile modulus improved by 4%, density increased by 6.8%, and heat deflection temperature (HDT) under high stress retained over 97% of its original value. These findings underscore the potential for integrating mechanically recycled CF-PC into industrial LFAM applications while highlighting the need for technological innovations to mitigate fiber degradation and enhance material performance for broader adoption. This critical step toward circular material practices in LFAM offers a pathway to reducing feedstock costs and environmental impact while maintaining functional performance in industrial applications.

additive manufacturing↗
DOE OSTI2020

Dynamic Bottlebrush Polymer Networks: Self-Healing in Super-Soft Materials

Here, we introduce a design strategy to expand the range of accessible mechanical properties in covalent adaptable networks (CANs) using bottlebrush polymer building blocks. Well-defined bottlebrush polymers with rubbery poly(4-methylcaprolactone) side-chains were crosslinked in formulations that include a bislactone and strong Lewis acid (tin ethylhexanoate). The resulting materials exhibit tunable stress relaxation rates at elevated temperatures (160–180 °C) due to dynamic ester crosslinks that undergo transesterification with residual hydroxy groups. Varying the crosslinker loading or bottlebrush backbone degree of polymerization yields predictable low-frequency shear moduli ca. 10–100 kPa, well below values typical of linear polymer CANs (1 MPa). These extensible networks can be stretched to strains as large as 350% before failure and undergo efficient self-healing to recover >85% of their original toughness upon repeated fracture and melt processing. In summary, molecular architecture creates new opportunities to tailor the mechanical properties of CANs in ways that are otherwise difficult to achieve.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymer, Additives, and Processing Effects on N95 Filter Performance

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Recent Advances in the Use of Ionic Liquids and Deep Eutectic Solvents for Lignocellulosic Biorefineries and Biobased Chemical and Material Production

Biorefineries, which process biomass feedstocks into valuable (bio)products, aim to replace fossil fuel-based refineries to produce energy and chemicals, reducing environmental and health hazards, including climate change, and supporting a sustainable economy. In particular, lignocellulose-based biorefineries, utilizing the most abundant renewable feedstock on Earth, have significant potential to supply sustainable energy, chemicals and materials. Ionic liquids (ILs, organic salts with low melting temperatures) and deep eutectic solvents (DESs, mixtures with eutectic points lower than the ideal mixture) are capable of dissolving some of the key lignocellulose polymers, and even the whole biomass. Furthermore, they have intrinsic advantages over molecular solvents, including safer usage profiles and high tunability, which allow tailored physicochemical properties. Such properties provide unique opportunities for the development of new processes that could unlock the full potential of future biorefineries. Here, we review the current state of lignocellulosic biomass processing with ILs and DESs, with a specific focus on the pretreatment chemistry, process flow and products from each component; followed by discussions on sustainability assessments and technological challenges. We aim to inform the research community about the opportunities, challenges and perspectives in developing truly sustainable lignocellulose-based biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2024

Development of Additive Manufacturing for Ceramic Matrix Composite Vanes

This report discusses the development of additive manufacturing for polymer-derived ceramic materials to create novel cooled gas turbine airfoils made from ceramics. Gas turbine engines have extremely high temperatures in the hot section of the engine that exceed the melting point of nickel superalloy materials that the engine is made from. Advanced cooling technologies have been developed over decades for metallic parts. Ceramic materials have higher temperature capabilities than superalloys, but are difficult to shape in the complex designs used in modern turbines. Several thrusts were investigated during the project, including development of higher material strength resins, improvement of ultraviolet (UV) photopolymerization and post-processing techniques to increase survivability of ceramic parts, thermomechanical modeling of novel ceramic airfoil designs for higher cooling effectiveness, and experimental validation of the modeling and manufacturing in a turbine vane test facility at nondimensional conditions that are relevant to modern gas turbines. Some major findings of the work include a significant increase in ceramic survivability during pyrolysis (a high temperature process that converts the organic material to a ceramic) by adjusting the composition ratios of the resins, as well as a tolulene soak after printing to remove unreacted polymer material. Thermomechanical optimization of the internal cooling structure indicated that a high density pin fin array would enable an 80% increase in overall cooling effectiveness relative to a baseline geometry, which was later verified during experimental testing in a high speed linear cascade. Ceramic vanes were tested at Mach numbers of up to 0.9 which is relevant to modern gas turbines. High temperature capability of the ceramic vanes was not tested in this work.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strong, thermo-reversible salogels with boronate ester bonds as thermal energy storage materials

Inorganic salt hydrates are promising phase change materials (PCMs) but suffer from low viscosity at temperatures above their melting point resulting in leakage problems during thermal storage applications. To achieve shape stabilization of one type of molten inorganic PCM – calcium nitrate tetrahydrate (CNH) – this work explored gelation of polyvinyl alcohol (PVA) in this solvent and the effect of dynamic boronate ester bonds on salogel strength. The occurrence of gelation of PVA in molten CNH but not in water is rationalized by the extremely high salt content and scarcity of hydration water in CNH, enabling intermolecular hydrogen bonding between PVA chains. While neat PVA salogels in CNH were weak, with a gel-to-sol transition temperature (T gel ) below room temperature, the addition of small amounts of borax (<~0.3 wt%) introduced dynamic covalent crosslinks and yielded salogels with T gel tunable over a wide temperature range from 7 to 70 °C. Here, the PVA/borax salogels were about one order of magnitude stronger than their well-known PVA/borax hydrogel counterparts, and, unlike PVA/borax hydrogels, were capable of retaining their shape and preventing leakage of molten CNH. Moreover, the salogels exhibited reversible and repeatable temperature-triggered gel-to-sol transitions and the ability to self-heal. The low polymer and crosslinker concentration also ensured that more than 95% of the heat of fusion of neat CNH was maintained in the salogels and was retained after twenty cycles of melting and crystallization, demonstrating the robust nature of these energy storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Fabrication of New PCM Hydrogel Composites

Salt hydrates are low-cost phase-change materials (PCMs) with excellent thermal energy storage capacities. However, they are limited by low thermal cycling stability due to incongruent melting-induced phase separation. This project will solve the long-standing issue of phase separation of salt hydrates by stabilizing salt particles in a charged polymer hydrogel network. The proposed approach uses combined physical and chemical stabilization mechanisms achieved by selecting a proper chemistry and molecular weight of the polymer matrix. In summary, we have identified several important formulations that show good energy storage capacity performance and good cycling stability. The thermal storage capacity can be further improved through further sample optimization. The thermal conductivities of the samples were low, but there are ways to improve it by adding a highly thermally conductive material with a high aspect ratio. The method of preparation is suitable for scale-up.

25 ENERGY STORAGE↗
DOE OSTI2021

Investigation of Surface Skidding Response of PBX 9501 and PBX 9502

Introduction: Assess the hazards of handling polymer bonder explosives(PBX) for the case of skidding with grit particles in the frictional interface. High explosive (HE) materials tested: PBX 9501 and 9502. High melting point materials at the skidding interface between HE and a substrate is known to increase the probability of ignition by creating hot spots not subject to reduced heating from the melting of HE material. Skidding occurred at peak forces of 6-26 kN normal force, and 0.6-3.4 kN of frictional force. Velocities for skidding range from 5-30 m/s, see figure 7. Sparse amounts of 300 μm silica grit is applied loosely to the HE surface before testing. Previous works have tested ignition by grit. Testing parameters include angle of impact, drop height, grit size, grit density, substrate material. This study focuses on pre ignition conditions and detailed thermal imaging of the frictional interface. Conclusions: Temperature hot spots were observed at high points in HE surface topology. These high points may be created by grit particles. Since these points impact first high frictional work is concentrated and quickly increases temperature. Small amounts of grit do not affect the overall frictional force but do concentrate the frictional work to create hot spots.

36 MATERIALS SCIENCE↗
DOE OSTI2026

BOTTLE: Hybrid Chemical-Mechanical Separation and Upcycling of Mixed Plastic Waste

The main objective of this project is to develop a hybrid mechanical-chemical recycling technology for multilayered and laminated plastics. We aimed to separate and upcycle up to more than 80% of the two main constituents of such structures, polyolefins and polyesters, for a significantly lower cost and at higher energetic efficiency and much larger throughputs than chemical recycling. At the end of the project, the team was able to: a) Develop an extrusion-based separation technology that resorts to polyester depolymerizaton and extraction and allows for more than 90% of the polyester to be separated in the melt from the main polyolefin stream. b) Depolymerize the separated PET to more than 90%, which facilitates its posterior repolymerization and guarantees its retention in the polymer value-chain. c) Develop a zeolite-induced extrusion-based technology able to conduct continuous catalytic cracking of polyolefins, including highly contaminated PCR streams, at temperatures as low as 350 OC. d) Show, using LCA/TEA analysis that the two technologies are much more advantageous techno-economically and over the material’s life cycle than existing recycling technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fractionation of Lignin for Selective Shape Memory Effects at Elevated Temperatures

We report a facile approach to control the shape memory effects and thermomechanical characteristics of a lignin-based multiphase polymer. Solvent fractionation of a syringylpropane-rich technical organosolv lignin resulted in selective lignin structures having excellent thermal stability coupled with high stiffness and melt-flow resistance. The fractionated lignins were reacted with rubber in melt-phase to form partially networked elastomer enabling selective programmability of the material shape either at 70 °C, a temperature that is high enough for rubbery matrix materials, or at an extremely high temperature, 150 °C. Utilizing appropriate functionalities in fractionated lignins, tunable shape fixity with high strain and stress recovery, particularly high-stress tolerance were maintained. Detailed studies of lignin structures and chemistries were correlated to molecular rigidity, morphology, and stress relaxation, as well as shape memory effects of the materials. The fractionation of lignin enabled enrichment of specific lignin properties for efficient shape memory effects that broaden the materials’ application window. Electron microscopy, melt-rheology, dynamic mechanical analysis and ultra-small angle neutron scattering were conducted to establish morphology of acrylonitrile butadiene rubber (NBR)-lignin elastomers from solvent fractionated lignins.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polypropylene Degradation Catalyzed by Tantalum Hydrides Supported on Sulfated Alumina

Ta–H + sites supported on sulfated aluminum oxide (SAO), [Ta(H) 2 (O–) 2 ][SAO] (1), catalyze the hydrogenolysis of isotactic polypropylene (iPP, M n = 13.3 kDa; D = 2.4; mmmm = 94%) to form low-molecular-weight branched alkanes (C 11 –C 30 ) in good yields (70%). Here, the alkanes formed lose stereochemical information originating from iPP, but residual iPP remains highly isotactic. In the presence of D 2 , similar mixtures of alkanes are formed containing –CH 3–x D x , –CHD, and –CD–. Residual iPP maintains high tacticity and incorporates deuterium primarily into –CH 3 groups of the polymer (–CH 3–x D x /–CHD–/–CD– ~10:1:0). 1 reacts with pinacolborane to form [TaH(κ 2 -H 2 BPin)(O–) 2 ][SAO] (2). At 200 °C in an iPP melt, 2 reacts to form products indicative of C–H bond activation at –CH 3 groups and internal –CH 2 – groups in iPP in a ~1:3 ratio, indicating a slight kinetic preference for C–H bond activation at internal –CH 2 – groups. 1 is more reactive toward iPP than high-density polyethylene in hydrogenolysis reactions

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

End-exclusion zones in strongly stretched, molten polymer brushes of arbitrary shape

Theories of strongly stretched polymer brushes, particularly the parabolic brush theory, are valuable for providing analytically tractable predictions for the thermodynamic behavior of surface-grafted polymers in a wide range of settings. Furthermore, the parabolic brush limit fails to describe polymers grafted to convex curved substrates, such as the surfaces of spherical nanoparticles or the interfaces of strongly segregated block copolymers. It has previously been shown that strongly stretched curved brushes require a boundary layer devoid of free chain ends, requiring modifications of the theoretical analysis. While this “end-exclusion zone” has been successfully incorporated into the descriptions of brushes grafted onto the outer surfaces of cylinders and spheres, the behavior of brushes on surfaces of arbitrary curvature has not yet been studied. We present a formulation of the strong-stretching theory for molten brushes on the surfaces of arbitrary curvature and identify four distinct regimes of interest for which brushes are predicted to possess end-exclusion zones, notably including regimes of positive mean curvature but negative Gaussian curvature. Through numerical solutions of the strong-stretching brush equations, we report predicted scaling of the size of the end-exclusion zone, the chain end distribution, the chain polarization, and the free energy of stretching with mean and Gaussian surface curvatures. Through these results, we present a comprehensive picture of how the brush geometry influences the end-exclusion zones and exact strong-stretching free energies, which can be applied, for example, to model the full spectrum of brush geometries encountered in block copolymer melt assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Processing behavior evolution of recycled polypropylene: An integrated experimental and Computer-Aided engineering simulation study

Polypropylene (PP) comprises 21% of global plastics production and 18% of plastics waste, yet less than 1% of solid-waste PP is recycled in the United States (U.S.), representing significant environmental and economic challenges. Mechanical recycling, the most prevalent recycling method, subject's materials to thermomechanical stresses, which typically degrade polymer properties, affecting the quality of polymer products. This study replicates the impact of mechanical recycling through multiple extrusion cycles to examine the effects on PP's processing behavior. Dynamic scanning calorimetry (DSC) measurements showed stable melting behavior across all processing conditions, while crystallization analysis exhibited consistent shifts in kinetic parameters. Rheological characterization demonstrated progressive viscosity reductions through successive cycles, particularly pronounced at elevated reprocessing temperatures. Here, the integration of this experimental data into injection molding simulations showed that recycled PP maintains viable processing characteristics. Our findings establish quantitative correlations between processing history and material behavior, enabling optimization of processing parameters directly rather than relying on trial-and-error approaches. While these results reflect idealized recycling conditions with minimal contamination, they provide a framework for understanding fundamental property evolution during mechanical recycling.

42 ENGINEERING↗
DOE OSTI2024

Designing a Dynamic Material via Interlocking Kraft Lignin with Ultrahigh Molecular Weight Poly(ethylene oxide)

The environmental issues stemming from plastic waste and the excessive use of petroleum-based chemicals are both concerning and urgent. To effectively address this problem, we need to adopt a comprehensive approach involving developing more sustainable and renewable materials. These materials should be capable of demonstrating similar or even better performance than functional polymers synthesized from petroleum-based chemicals. Our research aims to develop more sustainable materials by leveraging the intrinsic characteristics of a natural polymer, lignin, a byproduct of the biorefinery industries. We utilized the three-dimensional branching structure of lignin as a material framework. We employed an approach to co-reactive melt processing of kraft lignin with aliphatic flexible chains of soft cross-linkers through the reaction of the cross-linker epoxy chain ends with lignin functional groups. Our study demonstrates that the interlocked structure formed from the co-blending of kraft lignin with ultrahigh molecular weight poly(ethylene oxide) and the cross-linking of lignin chains through a solvent-free process can manipulate the macromolecular interactions and relaxation. This manipulation results in materials that exhibit a wide range of thermomechanical properties and self-healing and shape memory effects, with drastically improved stiffness in a single material. We have explored the fundamental understanding of the macromolecular chain relaxation dynamics originating from the interlocking structure formation. In conclusion, this investigation utilized various techniques, including thermal, mechanical, rheology, and quasi-elastic neutron scattering.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Composite entanglement topology and extensional rheology of symmetric ring-linear polymer blends

Extensive molecular simulations are applied to characterize the equilibrium dynamics, entanglement topology, and nonlinear extensional rheology of symmetric ring-linear polymer blends with systematically varied ring fraction ϕR. Chains with degree of entanglement Z≈14 are mixed to produce 10 well-entangled systems with ϕR varying from neat linear to neat ring melts. Z is large enough that except for very large ϕR, the rings are threaded by multiple linear chains in equilibrium. Primitive path analysis is used to visualize and quantify the structure of the composite ring-linear entanglement network. We measure the quantity of ring-linear threading and linear-linear entanglement as a function of ϕR and identify with simple arguments a ring fraction ϕR≈0.4 where the topological constraints of the composite entanglement network are maximized. These topological analyses are used to rationalize the ϕR-dependence of ring and linear chain dynamics, conformations, and rheology. Simulations of startup uniaxial elongation flows demonstrate the extensional stress overshoot observed in recent filament stretching experiments and characterize how it depends on the blend composition and entanglement topology. The overshoot is driven by an overstretching and recoil of ring polymers due to the convective unthreading of rings from linear chains.

O’Connor, Thomas C.↗
DOE OSTI2021

Dynamic tunability of phase-change material transition temperatures using ions for thermal energy storage

Thermal energy storage (TES) based on phase-change materials (PCMs) has many current and potential applications, such as climate control in buildings, thermal management for batteries and electronics, thermal textiles, and transportation of pharmaceuticals. Despite its promise, the adoption of TES has been limited, in part due to limited tunability of the transition temperature, which hinders TES performance for varying use temperatures. Transition temperature tuning of a material using an external stimulus, such as pressure or an electric field, typically requires very large stimuli. To circumvent this problem, here, we report on the dynamic transition temperature tunability of a PCM using ions. We achieve a transition temperature tunability up to 6°C in polyethylene glycol (PEG) by using the salt lithium oxalatodifluoroborate at a low voltage of 2.5 V, which may enable simpler and safer devices/system designs. We also explain the thermal properties of the salt/PCM solution using the Flory-Huggins theory.

25 ENERGY STORAGE↗
DOE OSTI2022

Microwave assisted heating of plastic waste: Effect of plastic/susceptor (SiC) contacting patterns

We discuss plastic accumulation as a growing sustainability challenge. Most plastics are thermally inert at room temperature, requiring high temperatures for depolymerization. In the quest for developing sustainable plastic upcycling, we investigate silicon carbide (SiC) as microwave absorbing susceptors for reaching depolymerization temperatures. We utilize three SiC topologies – particles, hot-pressed plastic films containing SiC particles, and monoliths. SiC particles of >0.5 mm in diameter can provide heating rates approaching ~200 °C/min at modest powers. Still, physically mixed plastic-susceptor beds suffer from density differences, causing non-uniform contact during plastic softening and melting. Hot-pressed plastic films containing SiC particles allow uniform plastic-susceptor contact but suffer from slow heating as only a single layer of susceptors exists between polymer layers. SiC monoliths mitigate these challenges by preferentially dissipating the microwaves and rapidly heating the plastics independently of polymeric properties.

36 MATERIALS SCIENCE↗