Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Atomic structure of different surface terminations of polycrystalline ZnPd

The intermetallic compound ZnPd has been found to have desirable characteristics as a catalyst for the steam reforming of methanol. The understanding of the surface structure of ZnPd is important to optimize its catalytic behavior. However, due to the lack of bulk single-crystal samples and the complexity of characterizing surface properties in the available polycrystalline samples using common experimental techniques, all previous surface science studies of this compound have been performed on surface alloy samples formed through thin-film deposition. In this study, we present findings on the chemical and atomic structure of the surfaces of bulk polycrystalline ZnPd studied by a variety of complementary experimental techniques, including scanning tunneling microscopy (STM), x-ray photoelectron spectroscopy (XPS), low energy electron microscopy (LEEM), photoemission electron microscopy (PEEM), and microspot low-energy electron diffraction ( μ -LEED). These experimental techniques, combined with density functional theory (DFT)-based thermodynamic calculations of surface free energy and detachment kinetics at the step edges, confirm that surfaces terminated by atomic layers composed of both Zn and Pd atoms are more stable than those terminated by only Zn or Pd layers. DFT calculations also demonstrate that the primary contribution to the tunneling current arises from Pd atoms, in agreement with the STM results. The formation of intermetallics at surfaces may contribute to the superior catalyst properties of ZnPd over Zn or Pd elemental counterparts. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

Evaluation of PbTe and SnTe as Ohmic Contact Layers in CdTe Solar Cell Devices

For solar cells based on CdTe, the choice of a suitable back contact material is limited by CdTe's deep work function. Here, we explored p-type PbTe and SnTe as ohmic contacts to CdTe. These contact layers were grown on single crystal CdTe substrates by molecular beam epitaxy, and the valence band offset between film and substrate was measured using X-ray photoemission spectroscopy. Polycrystalline device structures were also grown by sublimation to assess performance improvements. Doping was achieved in PbTe by thallium incorporation. Only the highest Tl doped PbTe resulted in a desirable band alignment with the CdTe, forming an electron reflector and no hole barrier. Time-resolved photoluminescence measurements also revealed significant photocarrier lifetime improvements for only the highest doped PbTe. Consequentially, devices incorporating the highest doped PbTe layers showed increased power conversion efficiency, primarily from increased fill factor. Doping of the PbTe was measured via Hall effect with variable magnetic field, which was required due to the formation of an n-type parasitic interface layer. To properly interpret the variable field Hall measurements, we derived an expression for the magnetic field-dependent conductivity tensor of an L-valley semiconductor.

anisotropic band valley↗

GrainGNN: A dynamic graph neural network for predicting 3D grain microstructure

We propose GrainGNN, a surrogate model for the evolution of polycrystalline grain structure under rapid solidification conditions in metal additive manufacturing. High fidelity simulations of solidification microstructures are typically performed using multicomponent partial differential equations (PDEs) with moving interfaces. The inherent randomness of the PDE initial conditions (grain seeds) necessitates ensemble simulations to predict microstructure statistics, e.g., grain size, aspect ratio, and crystallographic orientation. Here, currently such ensemble simulations are prohibitively expensive and surrogates are necessary.In GrainGNN, we use a dynamic graph to represent interface motion and topological changes due to grain coarsening. We use a reduced representation of the microstructure using hand-crafted features; we combine pattern finding and altering graph algorithms with two neural networks, a classifier (for topological changes) and a regressor (for interface motion). Both networks have an encoder-decoder architecture; the encoder has a multi-layer transformer long-short-term-memory architecture; the decoder is a single layer perceptron.We evaluate GrainGNN by comparing it to high-fidelity phase field simulations for in-distribution and out-of-distribution grain configurations for solidification under laser power bed fusion conditions. GrainGNN results in 80%–90% pointwise accuracy; and nearly identical distributions of scalar quantities of interest (QoI) between phase field and GrainGNN simulations compared using Kolmogorov-Smirnov test. GrainGNN's inference speedup (PyTorch on single x86 CPU) over a high-fidelity phase field simulation (CUDA on a single NVIDIA A100 GPU) is 150×–2000× for 100-initial grain problem. Further, using GrainGNN, we model the formation of 11,600 grains in 220 seconds on a single CPU core.

36 MATERIALS SCIENCE↗

Magnetic properties of high Li doped ZnO sol–gel thin films

Highlights: • Ferromagnetism in high Li doped ZnO films. • Magnetic properties observed by Guoy's and VSM method. • The rod and wrinkle like structures are observed from the surface of the films. • Band gap of ZnO does not get altered by high Li doping. - Abstract: Undoped and Li doped ZnO thin films were deposited on a glass substrate using the sol–gel dip coating method. The films were prepared at 5 mol.% and 10 mol.% of Li doped ZnO at 550 °C annealing temperature and the deposited films were characterized by X-ray diffraction (XRD), microscopic studies, Gouy's method, vibrating sample magnetometer (VSM) and UV–visible spectroscopy. All the deposited thin films had a hexagonal wurtzite structure with polycrystalline grains at random. Primarily magnetic properties of pure and Li doped ZnO films were observed by Guoy's method which depicted Dia and Para magnetic behavior at room temperature. VSM measurement reveals a coercivity of 97.7 Oe in the films. An inverse relative ferromagnetism was perceived in Li doped ZnO films which had an average transmission of <90%.

36 MATERIALS SCIENCE↗

Mesoscale polycrystal calculations of damage in spallation in metals

The goal of this project is to produce a damage model for spallation in metals informed by the polycrystalline grain structure at the mesoscale. Earlier damage models addressed the continuwn macroscale in which these effects were averaged out. In this work we focus on cross sections from recovered samples examined with EBSD (electron backscattered diffraction), which reveal crystal grain orientations and voids. We seek to understand the loading histories of specific sample regions by meshing up the crystal grain structure of these regions and simulating the stress, strain, and damage histories in our hydro code, FLAG. The stresses and strain histories are the fundamental drivers of damage and must be calculated. The calculated final damage structures are compared with those from the recovered samples to validate the simulations.

36 MATERIALS SCIENCE↗

Structural, optical and ethanol sensing properties of Cu-doped SnO{sub 2} nanowires

In present work, one-dimensional nanostructure of Cu-doped Tin oxide (SnO{sub 2}) was synthesized by using thermal evaporation method in a tubular furnace under Nitrogen (N{sub 2}) ambience. The growth was carried out at atmospheric pressure. SEM and TEM images reveal the growth of wire-like nanostructures of Cu-doped SnO{sub 2} on Si substrate. The XRD analysis confirms that the synthesized SnO{sub 2} nanowires have tetragonal rutile structure with polycrystalline nature and X-ray diffraction pattern also showed that Cu gets incorporated into the SnO{sub 2} lattice. EDX spectra confirm the doping of Cu into SnO{sub 2} nanowires and atomic fraction of Cu in nanowires is ∼ 0.5 at%. The Vapor Liquid Solid (VLS) growth mechanism for Cu-doped SnO{sub 2} nanowires was also confirmed by EDX spectra. The optical properties of as grown Cu-doped SnO{sub 2} nanowires were studied by using UV-vis spectra which concludes the band gap of about 3.7 eV. As synthesized single Cu-doped SnO{sub 2} nanowire based gas sensor exhibit relatively good performance to ethanol gas. This sensing behaviour offers a suitable application of the Cu-doped SnO{sub 2} nanowire sensor for detection of ethanol gas.

36 MATERIALS SCIENCE↗

Influence of Boron doping on the structural, optical and electrical properties of CdO thin films by spray pyrolysis technique

Cadmium oxide and Boron (B) doped Cadmium oxide thin films were deposited using spray pyrolysis technique. The structural, morphological, electrical and optical properties of undoped and B doped CdO films are analyzed by varying the dopant concentration in the solution. The structural study shows the polycrystalline nature and cubic structure of undoped and B doped CdO thin films. Surface morphological study reveals that the grains are spherical in shape. Optical and electrical studies showed n-type semiconducting nature and optical band gap of 2.44 eV of deposited thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low temperature thin film transistors with hollow cathode plasma-assisted atomic layer deposition based GaN channels

We report GaN thin film transistors (TFT) with a thermal budget below 250 °C. GaN thin films are grown at 200 °C by hollow cathode plasma-assisted atomic layer deposition (HCPA-ALD). HCPA-ALD-based GaN thin films are found to have a polycrystalline wurtzite structure with an average crystallite size of 9.3 nm. TFTs with bottom gate configuration are fabricated with HCPA-ALD grown GaN channel layers. Fabricated TFTs exhibit n-type field effect characteristics. N-channel GaN TFTs demonstrated on-to-off ratios (I{sub ON}/I{sub OFF}) of 10{sup 3} and sub-threshold swing of 3.3 V/decade. The entire TFT device fabrication process temperature is below 250 °C, which is the lowest process temperature reported for GaN based transistors, so far.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-fluence Ga-implanted silicon—The effect of annealing and cover layers

The influence of SiO{sub 2} and SiN{sub x} cover layers on the dopant distribution as well as microstructure of high fluence Ga implanted Si after thermal processing is investigated. The annealing temperature determines the layer microstructure and the cover layers influence the obtained Ga profile. Rapid thermal annealing at temperatures up to 750 °C leads to a polycrystalline layer structure containing amorphous Ga-rich precipitates. Already after a short 20 ms flash lamp annealing, a Ga-rich interface layer is observed for implantation through the cover layers. This effect can partly be suppressed by annealing temperatures of at least 900 °C. However, in this case, Ga accumulates in larger, cone-like precipitates without disturbing the surrounding Si lattice parameters. Such a Ga-rich crystalline Si phase does not exist in the equilibrium phase diagram according to which the Ga solubility in Si is less than 0.1 at. %. The Ga-rich areas are capped with SiO{sub x} grown during annealing which only can be avoided by the usage of SiN{sub x} cover layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, structural and magnetic characterization of polycrystalline Yb{sub 2}Ti{sub 2}O{sub 7}

The discovery of the Yb{sub 2}Ti{sub 2}O{sub 7} is among the most significant findings in magnetic materials in over a decade. The spin-ice model is based on an ingenious analogy to Pauling’s model of geometrical frustration in water ice, which is confirmed by various experiments. Here we present the characteristics of Yb2Ti2O7 studied by X-ray diffraction and magnetic measurements. Polycrystalline sample of Yb{sub 2}Ti{sub 2}O{sub 7} was prepared by sol-gel synthesis followed by thermal annealing at 1400 ° C for 36 hours. We calculated the change in the magnetic entropy from isothermal magnetization curves. We find no evidence of plateau at Pauling residual entropy. Temperature dependence of the inverse magnetic susceptibility reveals Curie-Wiess temperature Θ{sub cw} = 156mK and paramagnetic moment μ{sub eff} ≈ 3.58 µ{sub B}, indicating weak ferromagnetic interaction. Using Arrott plot we conclude that Yb{sub 2}Ti{sub 2}O{sub 7} possibly enters a magnetic ground state below Tc~140 mK.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental explanation of the formation mechanism of surface mound-structures by femtosecond laser on polycrystalline Ni{sub 60}Nb{sub 40}

Femtosecond laser surface processing (FLSP) is an emerging technique for creating functionalized surfaces with specialized properties, such as broadband optical absorption or superhydrophobicity/superhydrophilicity. It has been demonstrated in the past that FLSP can be used to form two distinct classes of mound-like, self-organized micro/nanostructures on the surfaces of various metals. Here, the formation mechanisms of below surface growth (BSG) and above surface growth (ASG) mounds on polycrystalline Ni{sub 60}Nb{sub 40} are studied. Cross-sectional imaging of these mounds by focused ion beam milling and subsequent scanning electron microscopy revealed evidence of the unique formation processes for each class of microstructure. BSG-mound formation during FLSP did not alter the microstructure of the base material, indicating preferential valley ablation as the primary formation mechanism. For ASG-mounds, the microstructure at the peaks of the mounds was clearly different from the base material. Transmission electron microscopy revealed that hydrodynamic melting of the surface occurred during FLSP under ASG-mound forming conditions. Thus, there is a clear difference in the formation mechanisms of ASG- and BSG-mounds during FLSP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal Growth and Atom Diffusion in (Cu)ZnTe/CdTe via Molecular Dynamics

Molecular dynamics (MD) simulations and experimental evaporation were applied to study the growth of evaporated (Cu)ZnTe on mono- and polycrystalline CdTe. The simulated structures show polytypism and polycrystallinity, including texturing and grain boundaries, diffusion, and other phenomena in excellent qualitative agreement with experimental atomic probe tomography, transmission electron microscope, and secondary ion mass spectrometry. Results show formation of Cu clusters in nonstoichiometric growths even at early stages of deposition. Results also show significantly faster diffusion along defected regions (uncorrelated CdTe grain boundaries) as compared with more highly crystalline areas (high-symmetry grain boundaries and pristine regions). Activation energies and pre-exponential factors of Cu, Zn, and Te diffusion were determined using simulation. The MD model captures crystal growth phenomena with a high degree of fidelity.

36 MATERIALS SCIENCE↗

Comparative thermal fatigue resistance

Nineteen cast nickel-base alloys, five cast cobalt-base alloys, and two wrought nickel-base alloys are included in study. Five nickel-base alloys have directionally-solidified polycrystalline grain structure. Three diffusion coatings and vapor-deposited overlay coating are also included in investigation.

Bizon, P. T.↗

Glass-Si heterojunction solar cells

An increase in efficiency from 2% to over 7% was achieved by a solar cell that used polycrystal silicon heterojunction with SnO2 glass. For Single crystal substrates, efficiencies close to 10% were measured. These cells had the same structures as polycrystalline cells. Work on p+/n heterojunction using In2O3 glass resulted in cells of 3% efficiency on polycrystalline material and 4% efficiency on single crystal material.

Ahrons, R. W.↗

Undercooling of molten silicon

Droplets of uncoated molten Si(0.4-0.8 mm diameter) have been undercooled 250 C. Ge droplets of similar size have been undercooled 280 C in a B2O3 flux. The observed nucleation onset temperatures of both Si and Ge droplets are at or below the predicted amorphous phase melting temperatures T(al). The solidified structures were polycrystalline. The nucleation frequency I, calculated from the Si data (20,000/cu cm s at 240 + or - 20 C undercooling), should be an upper limit of the homogeneous nucleation frequency of the crystal phase, since it has not been established that nucleation was homogeneous in these experiments. However, this limiting I for Si indicates that homogeneous nucleation of crystal would not become appreciable in laser pulsing experiments until the liquid Si is undercooled to well below T(al).

Devaud, G.↗

Li NMR study of heavy-fermion LiV2O4 containing magnetic defects

We present a systematic study of the variations of the {sup 7}Li NMR properties versus magnetic defect concentration up to 0.83 mol% within the spinel structure of polycrystalline powder samples and a collection of small single crystals of LiV2O4 in the temperature range from 0.5 to 4.2 K. We also report static magnetization measurements and ac magnetic susceptibility measurements at 14 MHz on the samples at low temperatures. Both the NMR spectrum and nuclear spin-lattice relaxation rate are inhomogeneous in the presence of the magnetic defects. The NMR data for the powders are well explained by assuming that (i) there is a random distribution of magnetic point defects, (ii) the same heavy Fermi liquid is present in the samples containing the magnetic defects as in magnetically pure LiV2O4, and (iii) the influences of the magnetic defects and of the Fermi liquid on the magnetization and NMR properties are separable. In the single crystals, somewhat different behaviors are observed. Remarkably, the magnetic defects in the powder samples show evidence of spin freezing below T {approx} 1.0 K, whereas in the single crystals with similar magnetic defect concentration no spin freezing was found down to 0.5 K. Thus different types of magnetic defects and/or interactions between them appear to arise in the powders versus the crystals, possibly due to the substantially different synthesis conditions of the powders and crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distinctive features of fluorescence and waveguides in magnesium aluminate spinel crystals driven by structural discrepancy

Transparent polycrystalline ceramics are of significant importance for a wide range of scientific and industrial applications. Developing a deeper understanding of their thermodynamic behavior is essential for achieving their maximum output performance in technological applications. This study provides a systematic investigation into the thermal excitation-induced fluorescence kinetics and waveguide characteristics of Magnesium Aluminate Spinel (MgAl 2 O 4 ) single crystals, with a focus on the intricate relationship between structure and properties. High-temperature extreme environments through irradiation with swift heavy ions 645.0 MeV Xe and 352.8 MeV Fe ions were created; the atomic deposition energy threshold (E th ) associated with disorder morphologies was assessed between 0.91 and 0.99 eV atom –1 . The track prediction model was developed to support the theoretical prediction of track formation. Electronic energy loss (E ele ) disrupts the balance of the initial structure through the thermal spike effect, leading to the formation of absorption-related F and F + color centers. These defects enhance photoluminescence in the visible spectrum and result in an effective modulation of the intrinsic bandgap. Moreover, as ion beams penetrate into the material, the uneven damage distribution induces the formation of waveguide structures. In conclusion, these findings provide valuable insights into the fabrication of functional devices through irradiation technologies and the structural changes of MgAl 2 O 4 at high temperatures within extreme environments.

36 MATERIALS SCIENCE↗