Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma rotation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Initiation of bipolar flows by magnetic field twisting in protostellar nebulae

A model is developed for the time-dependent twisting of an initial poloidal magnetic field threading a conducting protostellar disk. The region outside the disk is assumed to be filled, at least initially, with a low-density, force-free 'coronal' plasma. The differential rotation of the disk acts to twist the B field in the space outside the disk thus generating a toroidal magnetic field. In turn, the toroidal field acts to pinch the plasma and the poloidal field toward the system axis producing a collimated channel. This channel could facilitate the formation of bipolar flows. The magnitude and duration of the field twisting is expected to be limited by magnetohydrodynamic instability.

Newman, William I.↗
NASA NTRS1974

Spoke wavenumbers and mode transitions in NASA-Lewis bumpy torus

Waveforms of fluctuations of plasma potential, resulting from rotating electron and ion charge concentrations, have been observed in the Lewis bumpy torus. Since these fluctuations are thought to be spoke rotations in the direction of the E x B drift, measuring the direction of spoke rotation should determine the direction of the electric fields over much of the plasma surface. Since inward pointing electric fields should enhance confinement of the hot ions in this device, knowledge of the direction of the spoke rotation could give valuable information on the mechanism of plasma confinement and radial transport. A Langmuir probe was inserted into the plasma to measure the floating potential of the plasma; hence the direction of the electric field could be checked another way.

Gerdin, G. A.↗
DOE OSTI2023

Neural network model of neutral beam injection in the EAST tokamak to enable fast transport simulations

The neutral beam injection (NBI) system in EAST produces energetic neutral particles, which collide with electrons and ions in tokamak plasmas and heat the plasmas through Coulomb collisions. Moreover, it drives a non-inductive source of current, due to the charge-exchange collision between neutral particles and ions, and injects toroidal torque, which generates a toroidal rotation of the plasma. The effect caused by the NBI system, such as plasma heating, current drive, total neutron rate, momentum transfer, and shine-through, are modeled by a comprehensive module called NUBEAM. However, NUBEAM is computationally intensive since it relies on Monte Carlo methods. In this work, a neural network model has been developed as a surrogate model for NUBEAM in EAST. The database for neural-network model training, validation and testing is generated by running TRANSP for experimental discharges from recent EAST campaigns (after the latest NBI upgrade) while using the NUBEAM module. Simulation results illustrate that the trained neural network has the capability of replicating the predictions made by NUBEAM while demanding a significantly shorter execution time. Finally, these results indicate that surrogate models like the one proposed in this work could enable fast transport simulations for EAST after integrating them into a control-oriented predictive code such as COTSIM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

High-magnification Faraday rotation imaging and analysis of X-pinch implosion dynamics

An X-pinch load driven by an intense current pulse (>100 kA in ~100 ns) can result in the formation of a small radius, runaway compressional micro-pinch. A micro-pinch is characterized by a hot (>1 keV), current-driven (>100 kA), high-density plasma column (near solid density) with a small neck diameter (1–10 µm), a short axial extent (<1 mm), and a short duration (≲1 ns). With material pressures often well into the multi-Mbar regime, a micro-pinch plasma often radiates an intense, sub-ns burst of sub-keV to multi-keV x rays. A low-density coronal plasma immediately surrounding the dense plasma neck could potentially shunt current away from the neck and thus reduce the magnetic drive pressure applied to the neck. Here, to study the current distribution in the coronal plasma, a Faraday rotation imaging diagnostic (1064 nm) capable of producing simultaneous high-magnification polarimetric and interferometric images has been developed for the MAIZE facility at the University of Michigan. Designed with a variable magnification (1–10×), this diagnostic achieves a spatial resolution of ~35 µm, which is useful for resolving the ~100-μm-scale coronal plasma immediately surrounding the dense core. This system has now been used on a reduced-output MAIZE (100–200 kA, 150 ns) to assess the radial distribution of drive current immediately surrounding the dense micro-pinch neck. The total current enclosed was found to increase as a function of radius, r, from a value of ≈ 50 ± 25 kA at r ≈ 140 µm (at the edge of the dense neck) to a maximal value of ≈150 ± 75 kA for r ≥ 225 µm. This corresponds to a peak magnetic drive pressure of ≈75 ± 50 kbar at r ≈ 225 µm. The limitations of these measurements are discussed in the paper.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Empirical probability and machine learning analysis of m , n = 2, 1 tearing mode onset parameter dependence in DIII-D H-mode scenarios

m, n = 2, 1 tearing mode onset empirical probability and machine learning analyses of a multiscenario DIII-D database of over 14 000 H-mode discharges show that the normalized plasma beta, the rotation profile, and the magnetic equilibrium shape have the strongest impact on the 2,1 tearing mode stability, in qualitative agreement with neoclassical tearing modes (m and n are the poloidal and toroidal mode numbers, respectively). In addition, 2,1 tearing modes are most likely to destabilize when n > 1 tearing modes are already present in the core plasma. The covariance matrix of tearing sensitive plasma parameters takes a nearly block-diagonal form, with the blocks incorporating thermodynamic, current and safety factor profile, separatrix shape, and plasma flow parameters, respectively. This suggests a number of paths to improved stability at fixed pressure and edge safety factor primarily by preserving a minimum of 1 kHz differential rotation, increasing the minimum safety factor above unity, using upper single null magnetic configuration, and reducing the core impurity radiation. In addition, lower triangularity, lower elongation, and lower pedestal pressure may also help to improve stability. Furthermore, the electron and ion temperature, collisionality, resistivity, internal inductance, and the parallel current gradient appear to only weakly correlate with the 2,1 tearing mode onsets in this database.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1967

Jupiter's Magnetosphere

Magnetospheric model of Jupiter showing maximum plasma densities co-rotating with planet

PLASMA DENSITY↗
NASA NTRS1988

Static properties of a non-neutral Be-9(+)-ion plasma

The paper reports measurements of the static properties of laser-cooled nonneutral Be-9(+)-ion plasmas stored in Penning traps (PT) under a variety of experimental conditions. The shape, rotation frequency, density, and temperature of the ions were measured as functions of the PT potential and laser-cooling configuration. Within experimental error, the ion plasmas rotate without shear and exhibit approximate thermal equilibrium.

Brewer, L. R.↗
NASA NTRS1973

Analysis and synthesis of coronal and interplanetary energetic particle, plasma, and magnetic field observations over three solar rotations.

In a previous paper (Krimigis et al., 1971), simultaneous observations in 1967 of solar particle events at low (less than 1 MeV) energies were presented. In the present paper, the full complement of simultaneous plasma, magnetic field, and energetic particle data is combined, and a complete analysis is made of all the events discussed in the original paper. The essential concept of 'collimated convection' is introduced, whereby the bulk velocity along the field lines of low-energy solar particles is independent of solar local plasma velocity, and the particles are strongly collimated along the field line with no transverse velocity component other than that of the field line itself. Collimated convection effects are shown to exist in small-scale convection and large-scale evolution of particle fluxes; the particle fluxes are, in turn, used to delineate the small-scale and large-scale evolution of the interplanetary magnetic field. Use of collimated convection is made in demonstrating a technique whereby energetic particle intensity profiles in the interplanetary medium can be related to equatorial high coronal magnetic field structures, by using the instantaneous solar wind velocity. This technique is applied in mapping particle intensities from Mariner 5 onto H alpha synoptic charts of chromospheric magnetic field structures for Carrington rotations 1523 to 1525.

Roelof, E. C.↗
NASA NTRS1994

A mechanism to produce a dawn-dusk component of plasma flow during magnetic reconnection in the magnetotail

Magnetic reconnection between antiparallel field lines in the magnetotail is generally thought to produce plasma acceleration in the earthward-tailward direction. However, measurements of the plasma velocity in the magnetotail during substorm activity sometimes reveal a dawn-dusk component of plasma flow. In this paper, we show that a dawn-dusk component of plasma acceleration may be produced during reconnection if the neutral line is not perpendicular to the magnetic field. In this case, Magnetohydrodynamic (MHD) simulations show that reconnection between antiparallel field lines will initially produce plasma acceleration that is nearly parallel to the neutral line because the magnetic tension force is not opposed by a pressure gradient force in this direction. As the magnetic field topology evolves to a steady state, the plasma flow direction rotates until it is nearly parallel to the plane that initially contained the antiparallel magnetic field lines before reconnection (hereafter referred to as the initial field plane). However, the time required to reach a steady state (typically several hundred seconds in the magnetotail region) may be greater than the time during which the reconnection process is active. Consequently, bursts of plasma flow with a dawn-dusk component may occur in the magnetotail. The initial acceleration along the neutral line depends on the angle theta (sub B) between the neutral line and the initial field plane, with the largest burst of plasma flow along the neutral line occuring when theta (s ub B) = 45 degs.

Hawkins, J. G.↗
DOE OSTI2024

Overview of physics results from MAST upgrade towards core-pedestal-exhaust integration

Recent results from MAST Upgrade are presented, emphasising understanding the capabilities of this new device and deepening understanding of key physics issues for the operation of ITER and the design of future fusion power plants. The impact of MHD instabilities on fast ion confinement have been studied, including the first observation of fast ion losses correlated with Compressional and Global Alfvén Eigenmodes. High-performance plasma scenarios have been developed by tailoring the early plasma current ramp phase to avoid internal reconnection events, resulting in a more monotonic q profile with low central shear. The impact of m/n = 3/2, 2/1 and 1/1 modes on thermal plasma confinement and rotation profiles has been quantified, and scenarios optimised to avoid them have transiently reached values of normalised beta approaching 4.2. In pedestal and ELM physics, a maximum pedestal top temperature of ~350 eV has been achieved, exceeding the value achieved on MAST at similar heating power. Mitigation of type-I ELMs with n = 1 RMPs has been observed. Studies of plasma exhaust have concentrated on comparing conventional and Super-X divertor configurations, while X-point target, X-divertor and snowflake configurations have been developed and studied in parallel. In L-mode discharges, the separatrix density required to detach the outer divertors is approximately a factor 2 lower in the Super-X than the conventional configuration, in agreement with simulations. Detailed analysis of spectroscopy data from studies of the Super-X configuration reveal the importance of including plasma-molecule interactions and D 2 Fulcher band emission to properly quantify the rates of ionisation, plasma-molecule interactions and volumetric recombination processes governing divertor detachment. In H-mode with conventional and Super-X configurations, the outer divertors are attached in the former and detached in the latter with no impact on core or pedestal confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

On the relation between solar wind structure and solar wind rotational and tangential discontinuities.

Solar wind plasma and magnetic field data were used to identify rotational and tangential discontinuities during the first 40 days of the flight of Mariner 5. Of the 40 rotational discontinuities found, 36 were clustered in three distinct 3- to 6-day intervals. These three intervals were characterized by high solar wind bulk velocities, high magnetic field magnitudes, low densities, high correlation between velocity and magnetic field changes, and the presence of smooth Alfven waves. The rotational discontinuities had magnetic field changes that were generally close to the direction of magnetic field changes for smooth Alfven waves. Although the primary component of these changes was perpendicular to the equatorial plane for both, the radial component for the discontinuities was generally larger. The normals to the tangential discontinuity surfaces strongly preferred a direction near the ecliptic plane and perpendicular to the spiral field direction.

Turner, J. M.↗
NASA NTRS2013

Computational Studies of Magnetic Nozzle Performance

An extensive literature review of magnetic nozzle research has been performed, examining previous work, as well as a review of fundamental principles. This has allow us to catalog all basic physical mechanisms which we believe underlie the thrust generation process. Energy conversion mechanisms include the approximate conservation of the magnetic moment adiabatic invariant, generalized hall and thermoelectric acceleration, swirl acceleration, thermal energy transformation into directed kinetic energy, and Joule heating. Momentum transfer results from the interaction of the applied magnetic field with currents induced in the plasma plume., while plasma detachment mechanisms include resistive diffusion, recombination and charge exchange collisions, magnetic reconnection, loss of adiabaticity, inertial forces, current closure, and self-field detachment. We have performed a preliminary study of Hall effects on magnetic nozzle jets with weak guiding magnetic fields and weak expansions (p(sub jet) approx. = P(sub background)). The conclusion from this study is that the Hall effect creates an azimuthal rotation of the plasma jet and, more generally, creates helical structures in the induced current, velocity field, and magnetic fields. We have studied plasma jet expansion to near vacuum without a guiding magnetic field, and are presently including a guiding magnetic field using a resistive MHD solver. This research is progressing toward the implementation of a full generalized Ohm's law solver. In our paper, we will summarize the basic principle, as well as the literature survey and briefly review our previous results. Our most recent results at the time of submittal will also be included. Efforts are currently underway to construct an experiment at the University of Michigan Plasmadynamics and Electric Propulsion Laboratory (PEPL) to study magnetic nozzle physics for a RF-thruster. Our computational study will work directly with this experiment to validate the numerical model, in order to study magnetic nozzle physics and optimize magnetic nozzle design. Preliminary results from the PEPL experiment will also be presented.

Ebersohn, Frans H.↗
DOE OSTI2024

Tearing Stable Stationary ITER Baseline Operation in DIII-D

We present a tearing stable, stationary and reproducible operating solution for DIII-D plasmas characterized by the ITER Baseline Scenario normalized parameter set and shape. In these plasmas low differential rotation (Δf1,2) between the core and edge is identified as the single root cause of the onset of the primary limiting instability, the 2,1 Neoclassical Tearing Mode (NTM), while a group of other examined parameters have a much weaker impact on the stability. Explanation is offered by drift kinetic simulations, which show a six-fold reduction in the NTM onset threshold due to diminished stabilizing ion polarization currents when the seed island drift frequency ceases in the local plasma frame. Based on the experimental observation and the explanation provided by the theory, a new method is developed to sustain Δf1,2 by modifying the edge neoclassical potential through neutral gas fueling. This method enables stationary ITER baseline operation free of disruptive 2,1 tearing modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Divertor detachment in the pre-fusion power operation phase in ITER during application of resonant magnetic perturbations

Detachment of the divertor plasma during application of resonant magnetic perturbation (RMP) fields is evaluated for hydrogen H-mode plasma during the first pre-fusion power operation (PFPO-1) phase in ITER by 3D plasma boundary modelling with EMC3–EIRENE. Plasma response effects from a linearized, resistive, single fluid MHD model are discussed, which includes partial screening of the externally applied field—but also field amplification near the separatrix. Furthermore, this field amplification is found to play a pivotal role for the magnetic footprint on the divertor targets, but is sensitive to model parameters. Extensions of the footprint beyond the straight portions of the ITER vertical divertor targets, optimized for high stationary heat flux handling, may be possible depending on the level of toroidal rotation in the plasma. Exhaust from the bulk plasma is guided by the helical corrugations (lobes) of the perturbed separatrix, and this results in an upstream heat flux that is distributed over these lobes with lower peak values than in the typical radial heat flux profiles seen in the absence of magnetic perturbations. As a consequence, an earlier onset (with respect to the upstream density) of detachment is found in the traditional strike zone when RMPs are applied, but secondary, non-axisymmetric strike locations appear—and those remain attached at temperatures above 10 eV. Neon seeding can mitigate these non-axisymmetric heat loads, but this becomes less efficient for large magnetic footprints.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Experimental investigation of beam-ion losses induced by magnetic perturbations using the light ion beam probe technique in the ASDEX Upgrade tokamak

The impact of externally applied magnetic perturbations (MPs) on fast-ion losses has been investigated by means of the light ion beam probe (LIBP) technique in the ASDEX Upgrade tokamak. The LIBP technique allows to experimentally infer the fast-ion orbit displacement induced by MPs via first-orbit losses using scintillator based fast-ion loss detector (FILD) measurements. The fast-ion orbit displacement against different applied MP spectra has been studied. These shots were conducted in ELM mitigated H-mode plasmas. A rigid rotation of the MP coils was applied with a frequency of 1 Hz, with an n = 2 configuration and changing the differential phase between the upper and lower set of coils (ΔΦ ul ) on a shot-to-shot basis. Beam sources Q7 (tangential) and Q8 (radial) were used to probe different fast-ion orbits with FILD1. The measured fast-ion orbit displacement ranges from 3 to 20 mm approximately, and no qualitative difference is observed between ions from beam sources Q7 and Q8. The minimum is found for a ΔΦ ul ~ 50°, which is shifted with respect to the minimum of the plasma boundary displacement, found at ΔΦ ul ~ 0°. A first attempt to validate the orbit following code ASCOT—including the plasma response calculated with the MARS-F code—against these experimental measurements is performed. Finally, while the dependence of the first-orbit fast-ion displacement with ΔΦ ul does not match the experimental measurements, these simulations do capture other features such as the order of magnitude of the orbit displacement and the importance of the toroidal spectrum of the applied perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Interplanetary medium data book: Supplement 3A, 1977-1985

Supplement 3 of the Interplanetary Medium Data Book contains a detailed discussion of a data set compilation of hourly averaged interplanetary plasma and magnetic field parameters. The discussion addresses data sources, systematic and random differences, time shifting of ISEE 3 data, and plasma normalizations. Supplement 3 also contains solar rotation plots of field and plasma parameters. Supplement 3A contains computer-generated listings of selected parameters from the composite data set. These parameters are bulk speed (km/sec), density (per cu cm), temperature (in units of 1000 K) and the IMF parameters: average magnitude, latitude and longitude angles of the vector made up of the average GSE components, GSM Cartesian components, and the vector standard deviation. The units of field magnitude, components, and standard deviation are gammas, while the units of field direction angles and degrees.

Couzens, David A.↗
DOE OSTI2024

Quasilinear theory and modelling of gyrokinetic turbulent transport in tokamaks

The theory, development, and validation of reduced quasilinear models of gyrokinetic turbulent transport in the closed flux surface core of tokamaks is reviewed. In combination with neoclassical collisional transport, these models are successful in accurately predicting core tokamak plasma temperature, density, rotation, and impurity profiles in a variety of confinement regimes. Refined experimental tests have been performed to validate the predictions of the quasilinear models, probing changes in the dominant gyrokinetic instabilities, as reflected in fluctuation measurements, cross-phases, and transport properties. These tests continue to produce a deeper understanding of the complex mix of instabilities at both electron and ion gyroradius scales.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Measurement of near- and far-field impurity flows during pellet-induced rapid shutdown in DIII-D

Both near-field (<1 m away toroidally from the pellet) and far-field (>1 m away toroidally from the pellet) poloidal and toroidal impurity (carbon ion) flows are measured using visible imaging and fast bolometry during a polypropylene pellet-induced rapid plasma shutdown in the DIII-D tokamak. In the near field, the pellet appears to increase poloidal flow in the ion diamagnetic direction, possibly due to the strong radial temperature gradient caused by the pellet ablation. In the far field, the poloidal impurity flow typically appears slower and in the opposite direction. Toroidal impurity flow appears to be strongly influenced by the plasma initial toroidal rotation, especially in the far field. These results demonstrate that rapid shutdown impurity flows are not necessarily global in structure but can be quite different close to and far from the injected pellet.

Electromagnetic radiation detectors↗