Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase field model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Phase field simulation of anode microstructure evolution of solid oxide fuel cell through Ni(OH) 2 diffusion

Microstructure evolution in a solid oxide fuel cell anode is strongly affected by operating condition. The detailed mesoscale evolution mechanism under operating condition is still under debate. Here we develop a phase-field model to simulate microstructure evolution through formation and diffusion of gaseous Ni(OH)2. We studied the coarsening kinetics and redistribution of Ni under different steam distributions and compare it to that under pure hydrogen condition. Overall, the results suggest that although the presence of a steady gradient of steam leads to redistribution of Ni, Ni(OH) 2 formation and diffusion do not significantly change the Ni coarsening rate under strictly humid conditions, contrary to commonly reported hypotheses. It is concluded that competing mechanisms other than Ni(OH) 2 diffusion must be responsible for the experimentally observed Ni redistribution and enhanced coarsening under humid conditions.

25 ENERGY STORAGE↗
DOE OSTI2023

A combined kinetic Monte Carlo and phase field approach to model thermally activated dislocation motion

In this work, a kinetic Monte Carlo (KMC) scheme is integrated into a phase field dislocation dynamics (PFDD) model to account for thermal activation. While the implementation is general and could be applied to many different thermally activated processes, we apply the model to simulate a dislocation transmitting through an interface. Two cases are analyzed: a dislocation transmitting through a strong interface, and a dislocation transmitting through a more realistic grain boundary in tungsten. In conclusion, results and trends for both cases are discussed in detail, and ultimately show that the combined KMC-PFDD algorithm is effective in capturing thermally activated dislocation processes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermodynamics of Light-Induced Nanoscale Polar Structures in Ferroelectric Superlattices

Here we study the thermodynamics of nanoscale polar structures in PbTiO 3 /SrTiO 3 ferroelectric superlattices induced by above-bandgap optical excitation using a phase-field model explicitly considering both structural and electronic processes. We demonstrate that the light-excited carriers provide the charge compensation of polarization bound charges and the lattice thermal energy, both of which are key to the thermodynamic stabilization of a previously observed supercrystal, a three dimensionally periodic nanostructure, within a window of substrate strains, while different mechanical and electrical boundary conditions can stabilize a number of other nanoscale polar structures by balancing the competing short-range exchange interactions responsible for the domain wall energy and longrange electrostatic and elastic interactions. The insights into the light-induced formation and richness of nanoscale structures from this work offer theoretical guidance for exploring and manipulating the thermodynamic stability of nanoscale polar structures employing a combination of thermal, mechanical, and electrical stimuli as well as light.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Morphology selection in dealloying: A phase field study of the coupling among kinetic mechanisms

A phase field model is used to investigate how the corrosion rate and morphology of a dealloying metal is controlled by the kinetic rates of bulk solid diffusion, interfacial diffusivity, and interface dissolution. A specific focus is investigating the manner by which variations in these kinetic parameters synergistically influence the onset of a morphological instability at the solid-liquid interface, which is known to precede rapid dealloying corrosion towards highly topologically complex structures such as bicontinuous porous solids. This work demonstrates that this instability can be suppressed by either an increase of interdiffusion in the solid alloy, or by a decreasing rate of dissolution at the solid-liquid interface. When the instability is suppressed, the result is a relatively planar, passivated dealloying front. Importantly, however, coupled changes in kinetic parameters can also promote the morphological instability and sustain fine-scale ligament and pore formation. Finally, the relevance of the solid-liquid interfacial diffusion for determining the rate of dealloying and ligament formation is highlighted. By elucidating the mechanistic influence of bulk and interfacial kinetic factors on the dealloyed morphology, this work helps to rationalize the contrasting morphologies observed in various dealloying systems.

Diffusion↗
DOE OSTI2020

Transformation-induced fracture toughening in CuAlBe shape memory alloys: A phase-field study

Stress-induced transformation ahead of a crack tip can relax the stress concentration and produce fracture toughness in shape memory alloys (SMAs). In this manuscript, we utilize a nonisothermal phase-field model (PFM) to study the martensitic transformation induced crack tip toughening in CuAlBe SMA. The force-displacement curve, transformation zone and high stress zone in single crystalline samples show high dependency on the grain orientation with respect to the crack alignment. Comparison between isothermal and non-isothermal simulations reveals that the transformation-induced self-heating decreases the toughening capability by increasing the critical transformation stress. Investigating the high stress zones in CuAlBe and the nontransforming CuAl alloy shows that the toughening is obtained by redistributing the stress concentration far from the crack tip, as the high stress zone follows the tip of the transformation zone. Increasing the acuity of the crack tip is found to generate more symmetric martensite wings on both side of the crack axis and a more localized high stress zone. The polycrystal specimen displays higher toughening due to the internal constraints related to the presence of various grains with difference orientations. Depending on the orientation of the grain inclosing the crack tip, the toughening can be lower or higher. Finally, coincidence of the crack tip with a triple junction is found to improve the toughening behavior.

42 ENGINEERING↗
DOE OSTI2020

Domain Dynamics under Ultrafast Electric-Field Pulses

Exploring the dynamic responses of a material is of importance to both understanding its fundamental physics at high frequencies and potential device applications. Here we develop a phase-field model for predicting the dynamics of ferroelectric materials and study the dynamic responses of ferroelectric domains and domain walls subjected to an ultrafast electric field pulse. We discover a transition of domain evolution mechanisms from pure domain growth at a relatively low field to combined nucleation and growth of domains at a high field. We derive analytical models for the two regimes which allow us to extract the effective mass and damping coefficient of ferroelectric domain walls. The exhibition of two regimes for the ferroelectric domain dynamics at low and high electric fields is expected to be a general phenomenon that would appear for ferroic domains under other ultrafast stimuli. Finally, the present work also offers a general framework for studying domain dynamics and obtaining fundamental properties of domain walls and thus for manipulating the dynamic functionalities of ferroelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Intermittent Defect Fluctuations in Oxide Heterostructures

Abstract The heterogeneous nature, local presence, and dynamic evolution of defects typically govern the ionic and electronic properties of a wide variety of functional materials. While the last 50 years have seen considerable efforts into development of new methods to identify the nature of defects in complex materials, such as the perovskite oxides, very little is known about defect dynamics and their influence on the functionality of a material. Here, the discovery of the intermittent behavior of point defects (oxygen vacancies) in oxide heterostructures employing X‐ray photon correlation spectroscopy is reported. Local fluctuations between two ordered phases in strained SrCoO x with different degrees of stability of the oxygen vacancies are observed. Ab‐initio‐informed phase‐field modeling reveals that fluctuations between the competing ordered phases are modulated by the oxygen ion/vacancy interaction energy and epitaxial strain. The results demonstrate how defect dynamics, evidenced by measurement and modeling of their temporal fluctuations, give rise to stochastic properties that now can be fully characterized using coherent X‐rays, coupled for the first time to multiscale modeling in functional complex oxide heterostructures. The study and its findings open new avenues for engineering the dynamical response of functional materials used in neuromorphic and electrochemical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Crystal plasticity including a phase-field deformation twinning model for the high-rate deformation of cyclotetramethylene tetranitramine

A new finite strain thermomechanical model for the high-rate deformation of the β-polymorph of cyclotetramethylene tetranitramine (β-HMX) has been developed and applied to simulations of plate impact experiments. The crystal plasticity model is based on a model developed previously for RDX (Luscher et al. 2017), which is extended to incorporate deformation twinning. Twinning during normal plate impacts is simulated with a phase-field twin model. First, material parameters governing the kinetics of dislocation slip are calibrated on the subset of simulations which had negative Schmid factors for the twin system. Second, a parametric study of the twin material parameters was performed to find suitable values. Overall, the results of the simulations with the phase-field twinning model are reported for impacts on several crystal orientations. We find that the twin growth decreases with increasing distance from the impact surface because of dissipation of the shock front via dislocation-mediated plasticity, and that the simulated interface velocity with and without phase-field twinning do not show appreciable differences. These modeling results suggest that the significance of twinning in β-HMX cannot be determined with traditional loading configurations and diagnostics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multi-scale simulation of high burnup UO2 nuclear fuel during loss-of-coolant accident conditions

To improve the economics of commercial nuclear energy generation, U.S. utilities are currently seeking licensing approval to operate UO2 fuel to higher burnups. One significant safety issue that must be addressed to obtain approval is the potential for fine fragmentation/pulverization of the fuel during a loss-of-coolant accident (LOCA). It has been hypothesized that pulverization is caused by the rapid increase of pressure in fission gas bubbles in the high burnup region of the fuel during a LOCA. To better understand this phenomenon, a novel phase-field model of the fission gas bubble microstructure in UO2 has been developed and implemented in Idaho National Laboratory (INL)'s Marmot application for phase-field simulation of nuclear materials. Simulations of the bubble response to steady-state and transient conditions were conducted, and the results were used to inform a mechanistic model of pulverization in BISON, INL’s fuel performance simulation code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

A Gaussian process autoregressive model capturing microstructure evolution paths in a Ni–Mo–Nb alloy

Additive manufacturing is increasingly being employed to produce components of complex geometries in structural alloys because of the expected energy savings associated with the near-net-shape capability and the ability to build in novel internal features that are not possible with many conventional manufacturing approaches. However, because of the extreme thermal conditions encountered, the non-equilibrium microstructures produced during powder bed-based additive manufacturing processes must be subjected to custom post-heat treatment processes to recover the target mechanical properties. Phase-field models and simulation techniques have matured to a state where the microstructure evolution paths, and the morphologies of the resulting precipitate phases can be predicted reasonably accurately, considering alloy-specific thermodynamic and kinetic aspects of the nucleation and growth processes. However, phase-field simulations are computationally intensive, which precludes the ability to apply the simulations directly to the length scale of the entire component. Therefore, it is highly desirable to develop low-computational-cost surrogate models that effectively capture the physics at the microstructural length scale, while facilitating the design of optimized processing conditions resulting in location-specific targeted microstructures at the component scale. The work presented here demonstrates the application of the materials knowledge system framework to develop a surrogate model that effectively captures the microstructural path during annealing of a Ni–Mo–Nb alloy containing different Mo and Nb compositions known to segregate during solidification under additive manufacturing conditions. Specifically, the surrogate model built in this work is based on a Gaussian process autoregressive model informed by statistical representation of simulated microstructures using two-point correlations and dimensionality reduction through principal component analysis. In conclusion, this surrogate model is shown to capture the bifurcation of the microstructural path during precipitation, which yields a microstructure dominated by the $\gamma^{\prime\prime}$ phase at high Nb concentrations and the $\delta$ phase at low Nb concentrations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A thermodynamically consistent finite strain phase field approach to ductile fracture considering multi-axial stress states

Phase field models for ductile fracture have gained significant attention in the last two decades due to their ability in implicitly tracking the nucleation and propagation of cracks. However, most crack phase field formulations for elastoplastic solids focus only on the effects of plastic deformation, and do not consider the different multi-axial stress states that may arise in practical designs. In this work, a thermodynamically consistent phase field approach coupled with finite strain plasticity, considering multi-axial stress states is presented. In order to account for the coupling between plasticity and stress states, the Stress-Weighted Ductile Fracture Model (SWDFM) is utilized. The SWDFM represents a criterion for predicting ductile crack initiation under both monotonic and cyclic loadings based on histories of an internal plastic variable, stress triaxiality, and the Lode angle parameter. The excellent performance of the SWDFM for predicting ductile crack initiation motivates for its incorporation into a phase field approach for predicting both crack initiation and propagation through degradation of the fracture toughness. Moreover, based on the second law of thermodynamics, exact requirements are imposed on the rate at which the fracture toughness can evolve. Here, a novel function for degrading the plastic yield surface during the evolution of damage is introduced. This function, in line with experimental observations, leads to an accumulation of plastic deformation in damaged regions of a solid, and avoids numerical instabilities arising from concentrations of large plastic deformations in severely damaged regions. For validating the proposed model, results of computational simulations are compared to data from selected tests considering different multi-axial stress states. Comparisons of the numerical results with data from laboratory experiments demonstrate the capabilities of the proposed framework.

42 ENGINEERING↗
DOE OSTI2022

Phase-field simulations of fission gas bubble growth and interconnection in U-(Pu)-Zr nuclear fuel

Abstract The growth and interconnection of fission gas bubbles in the hotter central regions of U-(Pu)-Zr nuclear fuel has been simulated with a phase-field model. The Cahn-Hilliard equation was used to represent the two-phase microstructure, with a single defect species. The volume fraction of the bubble phase and surface area of the bubble-matrix interface were determined during growth and interconnection. Surface area increased rapidly during the initial stages of growth, then slowed and finally decreased as bubble interconnection began and coarsening acted to reduce surface area. The fraction of the bubbles vented to a simulation domain boundary, f V , was quantified as a measure of the microstructure’s interconnectivity and plotted as a function of porosity p . The defect species diffusivity was varied; although changes in diffusivity significantly affected the microstructure, the plots of f V vs. p did not change significantly. The percolation threshold p c was calculated to be approximately 0.26, depending on the assumed diffusivity and using an initial bubble number density based on experimental observations. This is slightly smaller than the percolation threshold for continuum percolation of overlapping 3D spheres. The simulation results were used to parameterize two different engineering-scale swelling models for U-(Pu)-Zr in the nuclear fuel performance code BISON.

Aagesen, Larry K. (ORCID:000000034936676X)↗
DOE OSTI2025

Computational Modeling of Molten Salt Infiltration and Oxidation in Nuclear Graphite

Graphite is utilized as a moderator and reflector in advanced nuclear reactor designs due to its high thermal conductivity, neutron moderation properties, and resistance to radiation damage. However, its longterm performance and reliability are challenged by degradation mechanisms such as molten salt infiltration in molten salt reactors (MSRs) and oxidation in gas-cooled reactors (GCRs). These mechanisms can compromise the structural integrity and operational lifetime of graphite components, necessitating a more detailed assessment of their physical behavior. This report focuses on the development of computational models for molten salt infiltration and oxidation of graphite to aid the design and performance analysis of graphite components. For molten salt infiltration, a computational framework is developed that couples incompressible Navier-Stokes and phase-field model to simulate the penetration of molten salt into graphite?s interconnected pore structure. Initial model verification is performed using two-phase flows in two dimensions, demonstrating the models ability to capture fundamental physical behavior and agree with analytical solution. This framework is then applied to a realistic IG110 nuclear graphite , where a computed tomography extracted pore geometry is used to analyse the infiltration behavior of FLiNaK molten salt. This model provides insights into how the microstructure and other relevant parameters influence the transport pathways of molten salt into graphite, potentially offering a means to rapidly evaluate a graphite grade?s resistance to infiltration. For oxidation, the report details pore-scale mass and heat transport models, describing the diffusion of gases, reaction kinetics, and thermal effects. Additionally, this report highlights inconsistencies in the existing volume-averaged macroscopic model, particularly in upscaling of reaction kinetics and flux terms, and surface to volume transformations. These inconsistencies suggest that current formulations may not accurately capture the experimentally observed graphite oxidation process, highlighting the need for improved model development. This work advances the development of physics-based computational models for graphite degradation, contributing to improved predictive models for next-generation nuclear reactor designs. Future efforts will focus on refining the infiltration model to address non-physical behaviors and enhance its robustness. Additionally, for oxidation, further studies will employ the principles of volume averaging to rigorously derive the upscaled equations, potentially in collaboration with subject matter experts.

Computational Modeling of Molten Salt Infiltration↗
DOE OSTI2020

Computational thermomechanics for crystalline rock. Part II: Chemo-damage-plasticity and healing in strongly anisotropic polycrystals

We present a thermal–mechanical–chemical-phase field model that captures the multi-physical coupling effects of precipitation creeping, crystal plasticity, anisotropic fracture, and crack healing in polycrystalline rock at various temperature and strain-rate regimes. This model is solved via a fast Fourier transfer solver with an operator-split algorithm to update displacement, temperature and phase field, and chemical concentration incrementally. In nuclear waste disposal in salt formation, brine inside the crystal salt may migrate along the grain boundary and cracks due to the gradient of interfacial energy and pressure. This migration has a significant implication on the permeability evolution, creep deformation, and crack healing within rock salt but is difficult to incorporate implicitly via effective medium theories compared with computational homogenization. As such, we introduce a thermodynamic framework and a corresponding computational implementation that explicitly captures the brine diffusion along the grain boundary and crack at the grain scale. Meanwhile, the anisotropic fracture and healing are captured via a high-order phase field that represents the regularized crack region in which a newly derived non-monotonic driving force is used to capture the fracture and healing due to the solution–precipitation. Numerical examples are presented to demonstrate the capacity of the thermodynamic framework to capture the multiphysics material behaviors of rock salt.

42 ENGINEERING↗
DOE OSTI2021

Phase field dislocation dynamics (PFDD) modeling of non-Schmid behavior in BCC metals informed by atomistic simulations

Body-Centered Cubic (BCC) metals exhibit anomalous mechanical properties such as twinning/anti-twinning and tension/compression asymmetry, which are attributed to asymmetric behavior of screw dislocations. Unlike Face-Centered Cubic (FCC) metals, the Critical Resolved Shear Stress (CRSS) of BCC metals deviates from the Schmid law. Here, we use a mesoscale modeling approach called Phase Field Dislocation Dynamics (PFDD) to understand the critical factors that control this non-Schmid behavior and reproduce atomistic predictions of the CRSS (Peierls stress). All inputs to the PFDD model are obtained from Molecular Statics (MS) simulations. Multiple pathways for modeling the non-Schmid behavior are investigated by incorporating the representative dislocation properties into different energy terms in the PFDD model. One way to understand non-Schmid behavior is to incorporate stress components projected on inclined planes into the external energy term within PFDD. Alternatively, we propose that non-Schmid behavior can also be accounted for by considering the variation of the {110} unstable stacking fault energy and the dislocation core width as a function of the applied tensorial stress field. The CRSS predicted using PFDD modeling is in excellent agreement with MS predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Probing the Critical Nucleus Size in the Metal-Insulator Phase Transition of VO 2

In a first-order phase transition, critical nucleus size governs nucleation kinetics, but the direct experimental test of the theory and determination of the critical nucleation size have been achieved only recently in the case of ice formation in supercooled water. The widely known metal-insulator phase transition (MIT) in strongly correlated VO 2 is a first-order electronic phase transition coupled with a solid-solid structural transformation. It is unclear whether classical nucleation theory applies in such a complex case. Here we directly measure the critical nucleus size of the MIT by introducing size-controlled nanoscale nucleation seeds with focused ion irradiation at the surface of a deeply supercooled metal phase of VO 2 . The results compare favorably with classical nucleation theory and are further explained by phase-field modeling. This Letter validates the application of classical nucleation theory as a parametrizable model to describe phase transitions of strongly correlated electron materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Microstructure, Thermal, and Mechanical Properties Relationships in U and UZr Alloys (Final Report)

Uranium-zirconium (U-Zr) alloys are candidate fuel systems for transmutation based reactors that can be used to burn long-lived minor actinides and fission products in fast spectrum reactors. Metallic fuels have also been gaining more recent attention for applications as accident tolerant fuels, as well as for use in small modular reactors. This research focused on a “science-based” approach to capture the connections between U and U-Zr alloys’ three-dimensional (3-D) microstructure, thermal properties, and mechanical properties through closely coordinated experiments and modeling efforts from the unirradiated to the irradiated fuels. Advanced characterization and modeling techniques were used to understand irradiation-induced microstructural evolution and its direct impact on the thermal and mechanical properties of U and U-Zr fuel. Closely coordinated experiments and modeling were performed to provide crucial data that does not currently exist. Overall, this research spanned multiple length and time scales within the models and experiments. The scope of the research encompassed the understanding of the irradiation effects in U and various U-Zr alloys with particular attention paid to three task areas: (1) microstructural evolution, (2) in-situ/ex-situ thermal and mechanical properties, and (3) multiscale modeling connections to microstructure, thermal, and mechanical properties. This research resulted in (1) the 3-D characterization of neutron irradiated U-Zr fuel in multiple phase regions to better understand fission gas swelling and constituent redistribution, (2) development of a microstructural model linking thermal and mechanical properties via in situ Raman and nanoindentation, (3) and mesoscale phase field modeling was coupled with the AEH method in the MOOSE framework was used to calculate the effective thermal conductivities of U-Zr fuels consisting of α-U and δ-UZr 2 heterogeneous microstructures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

A physics-based model of cladding wastage layer formation rate

In this report, lower length scale simulations to inform an engineering-scale model of fuel-cladding chemical interaction (FCCI) conducted under the auspices of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in FY22 are described. An overall strategy for the implementation of the BISON model is described, and the past and current lower length scale work on FCCI formation is put into the context of this overall strategy. Density functional theory and kinetic Monte Carlo simulations are used to determine the diffusion coefficient of neodymium in iron. Density functional theory calculations are also used to parameterize a parabolic approximation for the dependence of free energy on composition for the intermetallic compound Fe 17 Nd 2 . A phase-field model of the Fe-Nd system was developed that includes the random solid solution body-centered cubic phase and the intermetallic Fe 17 Nd 2 . The model was used to simulate growth of the intermetallic layer in a diffusion couple and the results were compared to experiment. The model’s prediction of the parabolic growth constant is within 40 % of the experimental value. The model is also used to simulate the formation of a grain boundary attack layer that is observed in experiment. The simulations show enhanced Nd concentration along the grain boundaries, but do not clearly show formation of a Fe 17 Nd 2 layer

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗