Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “performance study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Infrared horizon sensor modeling for attitude determination and control: Analysis and mission experience

The work performed by the Attitude Determination and Control Section at the National Aeronautics and Space Administration/Goddard Space Flight Center in analyzing and evaluating the performance of infrared horizon sensors is presented. The results of studies performed during the 1960s are reviewed; several models for generating the Earth's infrared radiance profiles are presented; and the Horizon Radiance Modeling Utility, the software used to model the horizon sensor optics and electronics processing to computer radiance-dependent attitude errors, is briefly discussed. Also provided is mission experience from 12 spaceflight missions spanning the period from 1973 to 1984 and using a variety of horizon sensing hardware. Recommendations are presented for future directions for the infrared horizon sensing technology.

Phenneger, M. C.↗

Design and performance/measurement simulation studies for a ER-2 sunphotometer

Work and results, including developed software, obtained under this grant (NAG 2-620) have been reported in various progress reports, an M.S. Thesis, and software programs. The purpose of this final report is simply to provide a documented listing of what has already been reported. This includes the following: (1) Conceptual Design and Simulation of a Spectral Sunphotometer for the ER-2 Aircraft; (2) Continued Simulation and Design Studies for an ER-2 Sunphotometer; and (3) Simulation and Performance Studies of a Spectra Sunphotometer for the ER-2 Aircraft. Also, software and computational results for modeling airmass and diffuse light effects due to aerosols were provided in support of NASA ARC research on the effects of aerosols resulting from the Pinatubo volcanic eruptions. The references for these articles are as follows: (1) Post Pinatubo Optical Depth Spectra vs. Latitude and Vortex Structure; and (2) Pinatubo and Pre-Pinatubo Optical-Depth Spectra -- Mauna Loa Measurements, Comparisons, Inferred Particle Size Distributions, Radiative Effects, and Relationships to Lidar Data.

Reagan, J. A.↗

Multilayer fluid dynamics of immiscible liquids

A comprehensive analytical, numerical and experimental study of convective flow in multilayer immiscible liquids has been performed. Studies include transparent high Prandtl number of liquid as well as opaque low Prandtl metallic melts. A new radioscopic flow visualization has been developed for the latter studies.

Koster, Jean N.↗

Low-Mass Inflation Systems for Inflatable Structures

The use of inflatable space structures has often been proposed for aerospace and planetary applications. Communication, power generation, and very-long-baseline interferometry are just three potential applications of inflatable technology. The success of inflatable structures depends on the development of an applications of inflatable technology. This paper describes two design studies performed to develop a low mass inflation system. The first study takes advantage of existing onboard propulsion gases to reduce the overall system mass. The second study assumes that there is no onboard propulsion system. Both studies employ advanced components developed for the Pluto fast flyby spacecraft to further reduce mass. The study examined four different types of systems: hydrazine, nitrogen and water, nitrogen, and xenon. This study shows that all of these systems can be built for a small space structure with masses lower than 0.5 kilograms.

Thunnissen, Daniel P.↗

[Cytoembryologic studies of super dwarf wheat grown in "Svet" greenhouse in the ground-based experiments]

The Project of scientific programs MIR/SHUTTLE and MIR/NASA was allowed for studying the productional, cytoembryological, morphological, biomechanical and other characteristics of superclub wheat on cultivation in the Svet greenhouse on-board orbital complex. This work was aimed at studying the duration of the complete cycle of ontogenesis of wheat and its individual stages, the peculiarities of forming the reproductive organs, processes, fertilization and formation of the seed production while cultivating in the Svet greenhouse under terrestrial conditions. Superclub wheat has been the object of experimentation. On cultivation of superclub wheat in the Svet greenhouse at designated conditions it was found that the cycle duration "from seed to seed" was 90-97 days. The number of granules in the wheat-ears studied was quite low and ranged from 15 to 30%. Performed studies with applying the light microscopy have indicated that in superclub wheat the embryological processes occur in compliance with those regularities which are described for the other forms of soft wheat.

Non-NASA Center↗

Southern Rockies Western Slope Agriculture: Identifying Drivers of Rangeland Production for Drought Planning on the Western Slope of the Southern Rockies

Over the last decade, the southern Rocky Mountains of the United States have experienced increasingly severe and variable drought. Local ranchers and landowners have reported strain on their operations, citing decreasing forage production for their cattle and a need to adjust their business models, even considering abandoning their businesses altogether. The study identified Major Land Resource Area-48 (MLRA-48) and northwestern Colorado as the key region for analysis. NASA DEVELOP partnered with the BLM Colorado River Field Office, Colorado State University Extension, USDA Forest Service, and the National Drought Mitigation Center to address stakeholder concerns of the efficacy of existing remotely sensed rangeland production estimation platforms and explore possible early warning climatic indicators of drought. The study identified two key rangeland platforms, the Rangeland Production Monitoring Service (RPMS) and Rangeland Analysis Platform (RAP) and used in-situ data to statistically validate their efficacy. RAP outperformed RPMS in estimating in-situ biomass and was therefore used in our climate modeling. Our study performed a random forest analysis, sampling 1500 points across the study area, comparing monthly RAP biomass estimates to a variety of climatic variables, including mean precipitation, temperature, palmer drought severity index, snow water equivalent, wind speed and direction, and vapor pressure deficit. After analysis, our study determined that vapor pressure deficit is a key indicator in predicting forage production in MLRA-48. Our study recommends the use of RAP in estimating potential forage, with caution for its tendency to overestimate. Our climate analysis provided our partners with greater understanding of the influence of various climatic factors in determining forage production and allows them to assist landowners in planning for future drought.

Addie Gonzalez↗

Low transition-region characteristics of equatorial coronal holes

The results of observations concerning the low transition region of equatorial coronal holes, performed by the Solar and Heliospheric Observatory (SOHO), are discussed. A study performed by other authors led to the conclusion that the chromospheric network corresponding to an equatorial hole is brighter in some lines than the one corresponding to the quiet sun. A statistical study on equatorial holes using the Lyman beta lines from the solar ultraviolet measurements of emitted radiation (SUMER), onboard SOHO, is presented. The mean profiles of cell, network and bright points in and out of the coronal holes are discussed, together with the possible implications of the observations.

Patsourakos, S.↗

Multi-System Effects of Daily Artificial Gravity Exposures in Humans Deconditioned by Bed Rest

We have begun to explore the utility of intermittent artificial gravity (AG) as a multi-system countermeasure to the untoward health and performance effects of adaptation to decreased gravity during prolonged space flight. The first study in this exploration was jointly designed by an international, multi-disciplinary team of scientists interested in standardizing an approach so that comparable data could be obtained from follow-on studies performed in multiple international locations. Fifteen rigorously screened male volunteers participated in the study after providing written informed consent. All were subjected to 21 days of 6deg head-down-tilt (HDT) bed rest. Eight were treated with daily 1hr AG exposures (2.5g at the feet decreasing to 1.0g at the heart) aboard a short radius (3m) centrifuge, while the other seven served as controls. Multiple observations were made of dependent measures in the bone, muscle, cardiovascular, sensory-motor, immune, and behavioral systems during a 10 day acclimatization period prior to HDT bed rest and again during an 8 day recovery period after the bed rest period. Comparisons between the treatment and control subjects demonstrated salutary effects of the AG exposure on aspects of the muscle and cardiovascular systems, with no untoward effects on the vestibular system, the immune system, or cognitive function. Bone deconditioning was similar between the treatment and control groups, suggesting that the loading provided by this specific AG paradigm was insufficient to protect that system from deconditioning. Future work will be devoted to varying the loading duty cycle and/or coupling the AG loading with exercise to provide maximum physiological protection across all systems. Testing will also be extended to female subjects. The results of this study suggest that intermittent AG could be an effective multi-system countermeasure.

Paloski, William H.↗

Wind Tunnel Model Design for Sonic Boom Studies of Nozzle Jet Flows with Shock Interactions

NASA and the U.S. aerospace industry are performing studies of supersonic aircraft concepts with low sonic boom pressure signatures. The computational analyses of modern aircraft designs have matured to the point where there is confidence in the prediction of the pressure signature from the front of the vehicle, but uncertainty remains in the aft signatures due to boundary layer and nozzle exhaust jet effects. Wind tunnel testing without inlet and nozzle exhaust jet effects at lower Reynolds numbers than in-flight make it difficult to accurately assess the computational solutions of flight vehicles. A wind tunnel test in the NASA Ames 9- by 7-Foot Supersonic Wind Tunnel is planned for February 2016 to address the nozzle jet effects on sonic boom. The experiment will provide pressure signatures of test articles that replicate waveforms from aircraft wings, tails, and aft fuselage (deck) components after passing through cold nozzle jet plumes. The data will provide a variety of nozzle plume and shock interactions for comparison with computational results. A large number of high-fidelity numerical simulations of a variety of shock generators were evaluated to define a reduced collection of suitable test models. The computational results of the candidate wind tunnel test models as they evolved are summarized, and pre-test computations of the final designs are provided.

Wind Tunnel↗

Low speed propellers: Impact of advanced technologies

Sensitivity studies performed to evaluate the potential of several advanced technological elements on propeller performance, noise, weight, and cost for general aviation aircraft are discussed. Studies indicate that the application of advanced technologies to general aviation propellers can reduce fuel consumption in future aircraft an average of ten percent, meeting current regulatory noise limits. Through the use of composite blade construction, up to 25 percent propeller weight reduction can be achieved. This weight reduction in addition to seven percent propeller efficiency improvements through application of advanced technologies result in four percent reduction in direct operating costs, ten percent reduction in aircraft acquisition cost, and seven percent lower gross weight for general aviation aircraft.

Keiter, I. D.↗

Model aerodynamic test results for a refined actuated inlet ejector nozzle at simulated takeoff and cruise conditions

Wind tunnel model tests were conducted to demonstrate the aerodynamic performance improvements of a refined actuated inlet ejector nozzle. Models of approximately one-tenth scale were configured to simulate nozzle operation at takeoff, subsonic cruise, transonic cruise and supersonic cruise. Variations of model components provided a performance evaluation of ejector inlet and exit area, forebody boattail angle and ejector inlet operation in the open and closed mode. Approximately 700 data points were acquired at Mach numbers of 0, 0.36, 0.9, 1.2, and 2.0 for a wide range of nozzle flow conditions. Results show that relative to two ejector nozzles previously tested performance was improved significantly at takeoff and subsonic cruise performance, a C sub f of 0.982, was attained equal to the high performance of the previous tests. The established advanced supersonic transport propulsion study performance goals were met or closely approached at takeoff and supersonic cruise.

Nelson, D. P.↗

Development of algorithms for understanding the temporal and spatial variability of the earth's radiation balance

A brief description is given of how temporal and spatial variability in the earth's radiative behavior influences the goals of satellite radiation monitoring systems and how some previous systems have addressed the existing problems. Then, results of some simulations of radiation budget monitoring missions are presented. These studies led to the design of the Earth Radiation Budget Experiment (ERBE). A description is given of the temporal and spatial averaging algorithms developed for the ERBE data analysis. These algorithms are intended primarily to produce monthly averages of the net radiant exitance on regional, zonal, and global scales and to provide insight into the regional diurnal variability of radiative parameters such as albedo and long-wave radiant exitance. The algorithms are applied to scanner and nonscanner data for up to three satellites. Modeling of dialy shortwave albedo and radiant exitance with satellite samling that is insufficient to fully account for changing meteorology is discussed in detail. Studies performed during the ERBE mission and software design are reviewed. These studies provide quantitative estimates of the effects of temporally sparse and biased sampling on inferred diurnal and regional radiative parameters. Other topics covered include long-wave diurnal modeling, extraction of a regional monthly net clear-sky radiation budget, the statistical significance of observed diurnal variability, quality control of the analysis, and proposals for validating the results of ERBE time and space averaging.

Brooks, D. R.↗

Nuclear reactor power as applied to a space-based radar mission

The SP-100 Project was established to develop and demonstrate feasibility of a space reactor power system (SRPS) at power levels of 10's of kilowatts to a megawatt. To help determine systems requirements for the SRPS, a mission and spacecraft were examined which utilize this power system for a space-based radar to observe moving objects. Aspects of the mission and spacecraft bearing on the power system were the primary objectives of this study; performance of the radar itself was not within the scope. The study was carried out by the Systems Design Audit Team of the SP-100 Project.

Jaffe, L.↗

Conceptual design of a next-generation, fully reusable manned launch system

The conceptual design of a rocket-powered, two-stage fully reusable launch vehicle has been performed as a part of the Advanced Manned Launch System (AMLS) study at the NASA Langley Research Center. The main goals of the AMLS study are to provide routine, low-cost manned access to space. Technologies and system approaches have been studied that would contribute to significant reductions in operating costs relative to current systems. System and operational characteristics of the two-stage fully reusable vehicle are presented, and the various tools and methods used in the design process are summarized. The results of a series of trade studies performed to examine the effect of varying major vehicle parameters on the reference two-stage fully reusable vehicle are also summarized.

Stanley, Douglas O.↗

Self-Reacting Friction Stir Welding for Aluminum Alloy Circumferential Weld Applications

Friction stir welding is an innovative weld process that continues to grow in use, in the commercial, defense, and space sectors. It produces high quality and high strength welds in aluminum alloys. The process consists of a rotating weld pin tool that plasticizes material through friction. The plasticized material is welded by applying a high weld forge force through the weld pin tool against the material during pin tool rotation. The high weld forge force is reacted against an anvil and a stout tool structure. A variation of friction stir welding currently being evaluated is self-reacting friction stir welding. Self-reacting friction stir welding incorporates two opposing shoulders on the crown and root sides of the weld joint. In self-reacting friction stir welding, the weld forge force is reacted against the crown shoulder portion of the weld pin tool by the root shoulder. This eliminates the need for a stout tooling structure to react the high weld forge force required in the typical friction stir weld process. Therefore, the self-reacting feature reduces tooling requirements and, therefore, process implementation costs. This makes the process attractive for aluminum alloy circumferential weld applications. To evaluate the application of self-reacting friction stir welding for aluminum alloy circumferential welding, a feasibility study was performed. The study consisted of performing a fourteen-foot diameter aluminum alloy circumferential demonstration weld using typical fusion weld tooling. To accomplish the demonstration weld, weld and tack weld development were performed and fourteen-foot diameter rings were fabricated. Weld development consisted of weld pin tool selection and the generation of a process map and envelope. Tack weld development evaluated gas tungsten arc welding and friction stir welding for tack welding rings together for circumferential welding. As a result of the study, a successful circumferential demonstration weld was produced leading the way for future circumferential weld implementation.

Bjorkman, Gerry↗

Effects of False Tilt Cues on the Training of Manual Roll Control Skills

This paper describes a transfer-of-training study performed in the NASA Ames Vertica lMotion Simulator. The purpose of the study was to investigate the effect of false tilt cues on training and transfer of training of manual roll control skills. Of specific interest were the skills needed to control unstable roll dynamics of a mid-size transport aircraft close to the stall point. Nineteen general aviation pilots trained on a roll control task with one of three motion conditions: no motion, roll motion only, or reduced coordinated roll motion. All pilots transferred to full coordinated roll motion in the transfer session. A novel multimodal pilot model identification technique was successfully applied to characterize how pilots' use of visual and motion cues changed over the course of training and after transfer. Pilots who trained with uncoordinated roll motion had significantly higher performance during training and after transfer, even though they experienced the false tilt cues. Furthermore, pilot control behavior significantly changed during the two sessions, as indicated by increasing visual and motion gains, and decreasing lead time constants. Pilots training without motion showed higher learning rates after transfer to the full coordinated roll motion case.

simulators↗

The Use of General Purpose Computer Programs to Derive Equations of Motion for Optimal Isolation Studies

Techniques were developed that utilize general purpose structural analysis computer programs to generate the equations of motion necessary for limiting performance studies. The methodology necessary to couple available general purpose finite element structural programs to a limiting performance capability was developed. Primary emphasis was given to the use of the general purpose program to develop equations of motion in a form that can be used by the limiting performance program.

Pilkey, W. D.↗