Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Real-time estimation and control of divertor surface heat flux on the DⅢ-D tokamak

We report Future tokamaks will require robust technologies for the mitigation of heat exhaust onto the plasma-facing components. As a first step towards this development, a system has been developed at DIII-D that estimates and controls in real-time the heat flux to the PFCs. Real-time estimation of the peak power flux from this model-based approach is validated with off-line infra-red measurements for various DIII-D plasma discharges. A nonlinear free-boundary simulation code (GSevolve) is used for simulating the closed loop response and for the off-line determination of the control parameters. The implementation and first experimental results of the application during the DIII-D plasma campaign are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structural characterization, EPR and thermoluminescence properties of Cd{sub 1−x}Ni{sub x}SiO{sub 3} nanocrystalline phosphors

Highlights: ► CdSiO{sub 3}:Ni{sup 3+} nanophosphorus have been prepared at much lower temperatures. ► Phosphors are well characterized by PXRD, TEM, FTIR and UV–Vis spectroscopy. ► EPR, thermo and photoluminescence properties were also reported. -- Abstract: Cd{sub 1−x}Ni{sub x}SiO{sub 3} (x = 1–7 mol%) nanophosphors have been prepared for the first time by the combustion method using oxylyldihydrizide as a fuel. Powder X-ray diffraction results confirm the formation of monoclinic phase. Scanning electron micrographs show that Ni{sup 2+} influences the porosity of samples. The optical energy gap is widened with increase of Ni{sup 2+} ion dopant. The electron paramagnetic resonance spectrum of Ni{sup 2+} ions in CdSiO{sub 3} exhibits a symmetric absorption at g = 2.343 and the site symmetry around Ni{sup 2+} ions is predominantly octahedral. The number of spins participating in resonance (N) and the paramagnetic susceptibility (χ) has been evaluated. The thermoluminescence intensity is found to increase up to ∼20 min ultra-violet exposure and thereafter, decrease with further increase of ultra-violet dose. The kinetic parameters such as activation energy (E), frequency factor (s) and order of kinetics was estimated using glow peak shape method and the results are discussed.

36 MATERIALS SCIENCE↗

Improved Sensitivity and Separations for Phosphopeptides using Online Liquid Chromotography Coupled with Structures for Lossless Ion Manipulations Ion Mobility–Mass Spectrometry

Phosphoproteomics greatly augments proteomics and holds tremendous potential for insights into the modulation of biological systems for various disease states, etc. However, numerous challenges hinder conventional methods in terms of measurement sensitivity, throughput, and capabilities for confident phosphopeptide and phosphosite identification. In this work, we report the first example of integrating structures for lossless ion manipulations ion mobility (SLIM) IM-MS with online reversed-phase liquid chromatography (LC) to evaluate its potential for addressing the aforementioned challenges. A mixture of 51 heavy-labeled phosphopeptides was analyzed with a SLIM IM module having integrated ion accumulation and long-path separation regions. The SLIM IM-MS provided improved sensitivity over an established LC-SRM method, with limits of detection as low as 50 pM (50 amol/µl) for several peptides. Conventionally problematic phosphopeptide isomers could be resolved following an 18 m SLIM IM separation. The 2-D peak capacity was estimated as ~9000 for 90 min LC separation coupled to an 18 m SLIM IM separation, considerably higher than LC alone and providing a basis for both improved identification and quantification, with additional gains projected with the future use of longer path SLIM IM separations. Thus, LC-SLIM IM-MS offers great potential for improving the sensitivity, separation, and throughput of phosphoproteomics analyses.

Chouinard, Christopher D.↗

D 2 O Interaction with Planar ZnO(0001) Bilayer Supported on Au(111): Structures, Energetics and Influence of Hydroxyls

Here, we investigate the interaction between D 2 O and the planar ZnO(0001) bilayer grown on Au(111) with temperature programmed desorption (TPD), low energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. We show that D 2 O molecules adsorbed on this planar surface form two ordered overlayers, a (3 × 3) and a (√3 × √3) R 30°, not seen before on any of the bulk ZnO single crystal surfaces. The apparent activation energies of desorption (Ed) estimated from TPD peaks are 15.2 and 16.7–17.3 kcal/mol for (3 × 3) and (√3 × √3) R 30°, respectively, which agree well with the adsorption energy values calculated from DFT (14.9–15.6 kcal/mol and 16.8–16.9 kcal/mol, respectively). The DFT calculations reveal that the formation of the overlayers takes place at different packing densities and is mediated by extensive hydrogen bonding among the molecules. The hydroxyl groups, which accumulate very slowly on the ZnO(0001) bilayer surface under the standard ultrahigh vacuum (UHV) environment, strongly suppress the formation of the (√3 × √3) R 30° overlayer but have less impact on the (3 × 3) overlayer. These findings are explained based on the difference in packing densities of the overlayers such that only the (3 × 3) overlayer with a more open structure can accommodate small amounts of the adsorbed hydroxyl groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrahigh Hot Carrier Transient Photocurrent in Nanocrystal Arrays by Auger Recombination

Here, we show that a new mechanism for carrier transport in solution-processed colloidal semiconductor nanocrystal arrays exists at high excitation intensity on ultrafast time scales and allows for facile intrinsic transport between as-prepared nanocrystals over long distances. By combining a high speed photoconductive switch with an ultrafast laser excitation in a sub-40 ps photoconductor, we observed transient photocurrents with peak densities of 3 × 10 4 – 10 6 mA/ cm 2 in self-assembled PbSe nanocrystals capped with long native oleic acid ligands. The ratio between the transient photocurrent peak and the steady-state dark current is 10 orders of magnitude. The transient mobility at the peak current is estimated to range between 0.5–17.5 cm 2 /(V s) for the various nanocrystal sizes studied, which is 6 to 9 orders of magnitude higher than the dark current steady-state mobility in PbSe, CdSe, and CdTe nanocrystals capped with native ligands. The results are analyzed using a kinetic model which attributes the ultrahigh transient photocurrent to multiple photogenerated excitons undergoing on-particle Auger recombination, followed by rapid tunneling at high energies. This mechanism is demonstrated for a wide range of PbSe nanocrystals sizes (diameters from 2.7 to 7.1 nm) and experimental parameters. Our observations indicate that native ligand-capped nanocrystal arrays are promising for optoelectronics applications wherein multiple carriers are photoinjected to interband states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Aerosol Activation in Radiation Fog at the Atmospheric Radiation Program Southern Great Plains Site

Environmental supersaturation is a key parameter in the formation of fog and clouds, yet it cannot be measured directly and must be inferred. Calculating the ambient supersaturation in fog requires knowledge of the aerosol hygroscopicity as well as particle size distribution, and relatively few values have been reported in the literature. Here we use κ-Köhler theory to derive aerosol activation properties based on particle hygroscopicity and dry particle size distributions, and then estimate the effective peak supersaturation during eight cases of radiative fog at the Southern Great Plains site in rural north-central Oklahoma, USA. The mean hygroscopicity parameter κ of particles likely to act as cloud condensation nuclei varied from 0.14 to 0.43. Ambient effective peak supersaturation during the fog episodes was between 0.01%–0.07%, with most values below 0.04%. Furthermore, the minimum 50% dry activation diameter generally ranged between 300–400 nm with little activation of particles with diameters below 300 nm.

54 ENVIRONMENTAL SCIENCES↗

Characterization of spent nuclear fuel canister surface roughness using surface replicating molds

In this study we present a replication method to determine surface roughness and to identify surface features when a sample cannot be directly analyzed by conventional techniques. As a demonstration, this method was applied to an unused spent nuclear fuel dry storage canister to determine variation across different surface features. In this study, an initial material down-selection was performed to determine the best molding agent and determined that non-modified Polytek PlatSil23-75 provided the most accurate representation of the surface while providing good usability. Other materials that were considered include Polygel Brush-On 35 polyurethane rubber (with and without Pol-ease 2300 release agent), Polytek PlatSil73-25 silicone rubber (with and without PlatThix thickening agent and Pol-ease 2300 release agent), and Express STD vinylpolysiloxane impression putty. The ability of PlatSil73-25 to create an accurate surface replica was evaluated by creating surface molds of several locations on surface roughness standards representing ISO grade surfaces N 3 , N 5 , N 7 , and N 8 . Overall, the molds were able to accurately reproduce the expected roughness average (R a ) values, but systematically over-estimated the peak-valley maximum roughness (R z ) values. Using a 3D printed sample cell, several locations across the stainless steel spent nuclear fuel canister were sampled to determine the surface roughness. These measurements provided information regarding variability in normal surface roughness across the canister as well as a detailed evaluation on specific surface features (e.g., welds, grind marks, etc.). The results of these measurements can support development of dry storage canister ageing management programs, as surface roughness is an important factor for surface dust deposition and accumulation. This method can be applied more broadly to different surfaces beyond stainless steel to provide rapid, accurate surface replications for analytical evaluation by profilometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Measuring the Hubble constant with Type Ia supernovae as near-infrared standard candles

The most precise local measurements of H 0 rely on observations of Type Ia supernovae (SNe Ia) coupled with Cepheid distances to SN Ia host galaxies. Recent results have shown tension comparing H 0 to the value inferred from CMB observations assuming ΛCDM, making it important to check for potential systematic uncertainties in either approach. To date, precise local H 0 measurements have used SN Ia distances based on optical photometry, with corrections for light curve shape and colour. Here, we analyse SNe Ia as standard candles in the near-infrared (NIR), where luminosity variations in the supernovae and extinction by dust are both reduced relative to the optical. From a combined fit to 9 nearby calibrator SNe with host Cepheid distances from Riess et al. (2016) and 27 SNe in the Hubble flow, we estimate the absolute peak J magnitude M J = -18.524 ± 0.041 mag and H 0 = 72.8 ± 1.6 (statistical) ±2.7 (systematic) km s -1 Mpc -1 . The 2.2% statistical uncertainty demonstrates that the NIR provides a compelling avenue to measuring SN Ia distances, and for our sample the intrinsic (unmodeled) peak J magnitude scatter is just ~0.10 mag, even without light curve shape or colour corrections. Our results do not vary significantly with different sample selection criteria, though photometric calibration in the NIR may be a dominant systematic uncertainty. Our findings suggest that tension in the competing H 0 distance ladders is likely not a result of supernova systematics that could be expected to vary between optical and NIR wavelengths, like dust extinction. We anticipate further improvements in H 0 with a larger calibrator sample of SNe Ia with Cepheid distances, more Hubble flow SNe Ia with NIR light curves, and better use of the full NIR photometric data set beyond simply the peak J-band magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗

Search for gamma-ray emission from Galactic novae with the Fermi -LAT

Context. A number of novae have been found to emit high-energy gamma rays (>100 MeV). However, the origin of this emission is not yet understood. We report on the search for gamma-ray emission from 75 optically detected Galactic novae in the first 7.4 years of operation of the Fermi Large Area Telescope using the Pass 8 data set. Aims. We compile an optical nova catalog including light curves from various resources and estimate the optical peak time and optical peak magnitude in order to search for gamma-ray emission to determine whether all novae are gamma-ray emitters. Methods. We repeated the analysis of the six novae previously identified as gamma-ray sources and developed a unified analysis strategy that we then applied to all novae in our catalog. We searched for emission in a 15 day time window in two-day steps ranging from 20 days before to 20 days after the optical peak time. We performed a population study with Monte Carlo simulations to set constraints on the properties of the gamma-ray emission of novae. Results. Two new novae candidates have been found at ~ 2σ global significance. Although these two novae candidates were not detected at a significant level individually, taking them together with the other non-detected novae, we found a sub-threshold nova population with a cumulative 3σ significance. We report the measured gamma-ray flux for detected sources and flux upper limits for novae without significant detection. Lastly, our results can be reproduced by several gamma-ray emissivity models (e.g., a power-law distribution with a slope of 2), while a constant emissivity model (i.e., assuming novae are standard candles) can be rejected.

79 ASTRONOMY AND ASTROPHYSICS↗

An Innovative Adaptive Pushover Procedure Based on Storey Shear

Since the conventional pushover analyses are unable to consider the effect of the higher modes and progressive variation in dynamic properties, recent years have witnessed the development of some advanced adaptive pushover methods. However in these methods, using the quadratic combination rules to combine the modal forces result in a positive value in load pattern at all storeys and the reversal sign of the modes is removed; consequently these methods do not have a major advantage over their non-adaptive counterparts. Herein an innovative adaptive pushover method based on storey shear is proposed which can take into account the reversal signs in higher modes. In each storey the applied load pattern is derived from the storey shear profile; consequently, the sign of the applied loads in consecutive steps could be changed. Accuracy of the proposed procedure is examined by applying it to a 20-storey steel building. It illustrates a good estimation of the peak response in inelastic phase.

36 MATERIALS SCIENCE↗

X-ray Emission of Low-Energy-Peaked BL Lacertae Objects

Presented here is an analysis of X-ray observations of the following seven low-energy-peaked BL Lacertae objects: BL Lacertae, S5 0716+71, W Comae, 3C 66A, S4 0954+65, OJ 287, and AO 0235+16. The spectral data for these objects were taken from observations by the XMM-Newton and/or Chandra X-ray observatories. These objects are being analyzed in an effort to reanalyze all XMM-Newton and Chandra data of low-energy BL Lacs, similar to the efforts of Perlman et al.[4] for high energy BL Lacs. The objects were studied in an effort to understand the nature of the X-ray and multi-waveband emissions in these objects, study the shape of the spectra, and compare the observations of low-energy-peaked BL Lacs to previous observations of these objects and also to observations of high-energy-peaked BL Lacs. Light curves and spectra were analyzed to look for evidence of spectral variability in the objects and as a comparison to previous research on these objects. Most data shows both synchrotron and Inverse-Compton emission, though only little correlation was seen between the emission strength and the spectral slope. Our data is generally well-fitted to a broken power law model with distinct bimodality seen in the first spectral index (six observations with {Gamma}{sub 1{approx}}0.4 and four observations with {Gamma}{sub 1{approx}}3.0), a break in energy between 0.6 and 1.4 keV, and a second spectral index {Gamma}{sub 2{approx}}2.0. None of the observations showed spectral lines, which is consistent with past results. For S5 0716+71 the XMM-Newton X-ray and optical data, along with radio data obtained from the University of Michigan Radio Astronomy Observatory (UMRAO), a spectral energy distribution was created and peak frequencies were estimated.

79 ASTRONOMY AND ASTROPHYSICS↗

Diamond micro-Raman thermometers for accurate gate temperature measurements

Determining the peak channel temperature in AlGaN/GaN high electron mobility transistors and other devices with high accuracy is an important and challenging issue. A surface-sensitive thermometric technique is demonstrated, utilizing Raman thermography and diamond microparticles to measure the gate temperature. This technique enhances peak channel temperature estimation, especially when it is applied in combination with standard micro-Raman thermography. Its application to other metal-covered areas of devices, such as field plates is demonstrated. Furthermore, this technique can be readily applied to other material/device systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced emergence of unusually high-frequency transverse excitations in a liquid alkali metal: Evidence of two types of collective excitations contributing to the transverse dynamics at high pressures

Unlike phonons in crystals, the collective excitations in liquids cannot be treated as propagation of harmonic displacements of atoms around stable local energy minima. The viscoelasticity of liquids, reflected in transition from the adiabatic to elastic high-frequency speed of sound and in absence of the long-wavelength transverse excitations, results in dispersions of longitudinal (L) and transverse (T) collective excitations essentially different from the typical phonon ones. Practically, nothing is known about the effect of high pressure on the dispersion of collective excitations in liquids, which causes strong changes in liquid structure. Here dispersions of L and T collective excitations in liquid Li in the range of pressures up to 186 GPa were studied by ab initio simulations. Two methodologies for dispersion calculations were used: direct estimation from the peak positions of the L/T current spectral functions and simulation-based calculations of wavenumber-dependent collective eigenmodes. It is found that at ambient pressure, the longitudinal and transverse dynamics are well separated, while at high pressures, the transverse current spectral functions, density of vibrational states, and dispersions of collective excitations yield evidence of two types of propagating modes that contribute strongly to transverse dynamics. Emergence of the unusually high-frequency transverse modes gives evidence of the breakdown of a regular viscoelastic theory of transverse dynamics, which is based on coupling of a single transverse propagating mode with shear relaxation. The explanation of the observed high-frequency shift above the viscoelastic value is given by the presence of another branch of collective excitations. With the pressure increasing, coupling between the two types of collective excitations is rationalized within a proposed extended viscoelastic model of transverse dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Upgrading multilayer zone plate technology for hard x-ray focusing

Multilayer zone plate (MZP) technology for hard X-ray focusing was upgraded and its focusing performance was evaluated using 20-keV X-rays at the synchrotron beamline (BL24XU) of SPring-8. The MZP consists of MoSi{sub 2} and Si layers alternately deposited on a glass fiber by magnetron sputtering so that all zone boundaries satisfy the Fresnel zone configuration. The focused beam was evaluated using knife-edge scanning in which the measured intensity distribution is identical to the line spread function (LSF) in the focal plane. The focused beamsize of about 30 nm was estimated by oscillation peaks observed in the measured LSF according to Rayleigh’s criterion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A monitoring campaign for Luhman 16AB. I. Detection of resolved near-infrared spectroscopic variability

We report resolved near-infrared spectroscopic monitoring of the nearby L dwarf/T dwarf binary WISE J104915.57–531906.1AB (Luhman 16AB), as part of a broader campaign to characterize the spectral energy distribution and temporal variability of this system. A continuous 45 minute sequence of low-resolution IRTF/SpeX data spanning 0.8-2.4 μm were obtained, concurrent with combined-light optical photometry with ESO/TRAPPIST. Our spectral observations confirm the flux reversal of this binary, and we detect a wavelength-dependent decline in the relative spectral fluxes of the two components coincident with a decline in the combined-light optical brightness of the system over the course of the observation. These data are successfully modeled as a combination of achromatic (brightness) and chromatic (color) variability in the T0.5 Luhman 16B, consistent with variations in overall cloud opacity; and no significant variability was found in L7.5 Luhman 16A, consistent with recent resolved photometric monitoring. We estimate a peak-to-peak amplitude of 13.5% at 1.25 μm over the full light curve. Using a simple two-spot brightness temperature model for Luhman 16B, we infer an average cold covering fraction of ≈30%-55%, varying by 15%-30% over a rotation period assuming a ≈200-400 K difference between hot and cold regions. We interpret these variations as changes in the covering fraction of a high cloud deck and corresponding 'holes' which expose deeper, hotter cloud layers, although other physical interpretations are possible. A Rhines scale interpretation for the size of the variable features explains an apparent correlation between period and amplitude for Luhman 16B and the variable T dwarfs SIMP 0136+0933 and 2MASS J2139+0220, and predicts relatively fast winds (1-3 km s{sup –1}) for Luhman 16B consistent with light curve evolution on an advective time scale (1-3 rotation periods). The strong variability observed in this flux reversal brown dwarf pair supports the model of a patchy disruption of the mineral cloud layer as a universal feature of the L dwarf/T dwarf transition.

79 ASTRONOMY AND ASTROPHYSICS↗

Small-scale properties of atomic gas in extended disks of galaxies

We present high-resolution H I 21 cm observations with the Karl G. Jansky Very Large Array for three H I rich galaxies in absorption against radio quasars. Our sample contains six sightlines with impact parameters from 2.6 to 32.4 kpc. We detected a narrow H I absorber of FWHM 1.1 km s{sup –1} at 444.5 km s{sup –1} toward SDSS J122106.854+454852.16 probing the dwarf galaxy UCG 7408 at an impact parameter of 2.8 kpc. The absorption feature was barely resolved and its width corresponds to a maximum kinetic temperature, T{sub k} ≈ 26 K. We estimate a limiting peak optical depth of 1.37 and a column density of 6 × 10{sup 19} cm{sup –2}. The physical extent of the absorber is 0.04 kpc{sup 2} and covers ∼25%-30% of the background source. A comparison between the emission and absorption strengths suggests the cold-to-total H I column density in the absorber is ∼30%. Folding in the covering fraction, the cold-to-total H I mass is ∼10%. This suggest that condensation of warm H I (T{sub s} ∼ 1000 K) to cold phase (T{sub s} < 100 K) is suppressed in UGC 7408. The unusually low temperature of the H I absorber also indicates inefficiency in condensation of atomic gas into molecular gas. The suppression in condensation is likely to be the result of low metal content in this galaxy. The same process might explain the low efficiency of star formation in dwarf galaxies despite their huge gas reservoirs. We report the non-detection of H I in absorption in five other sightlines. This indicates that either the cold gas distribution is highly patchy or the gas is much warmer (T{sub s} > 1000 K) toward these sightlines.

79 ASTRONOMY AND ASTROPHYSICS↗

Symmetry of the CMB sky as a new test of its statistical isotropy. Non cosmological octupole?

In this article we propose a novel test for statistical anisotropy of the CMB ΔT( n-circumflex = (θ,φ)). The test is based on the fact, that the Galactic foregrounds have a remarkably strong symmetry with respect to their antipodal points with respect to the Galactic plane, while the cosmological signal should not be symmetric or asymmetric under these transitions. We have applied the test for the octupole component of the WMAP ILC 7 map, by looking at a{sub 3,1} and a{sub 3,3}, and their ratio to a{sub 3,2} both for real and imaginary values. We find abnormal symmetry of the octupole component at the level of 0.58%, compared to Monte Carlo simulations. By using the analysis of the phases of the octupole we found remarkably strong cross-correlations between the phases of the kinematic dipole and the ILC 7 octupole, in full agreement with previous results. We further test the multipole range 2 < l < 100, by investigating the ratio between the l+m = even and l+m = odd parts of power spectra. We compare the results to simulations of a Gaussian random sky, and find significant departure from the statistically isotropic and homogeneous case, for a very broad range of multipoles. We found that for the most prominent peaks of our estimator, the phases of the corresponding harmonics are coherent with phases of the octupole. We believe, our test would be very useful for detections of various types of residuals of the foreground and systematic effects at a very broad range of multipoles 2 ≤ l ≤ 1500−3000 for the forthcoming PLANCK CMB map, before any conclusions about primordial non-Gaussianity and statistical anisotropy of the CMB.

79 ASTRONOMY AND ASTROPHYSICS↗

Metal Oxide Varistor (MOV) Lifetime Estimation with Impulse-Based Testing in PV Inverter Systems

Surges caused by lightning strikes could damage electrical components in photovoltaic (PV) systems. Metal oxide varistors (MOVs) are commonly used to protect PV systems from lightning strikes. This paper proposes a holistic impulse-based MOV lifetime estimation framework. The impacts of peak current and fault duration induced by lightning events are considered in the MOV lifetime estimation framework. Moreover, the impact of different parameter combinations on MOV lifetime estimation is analyzed. The effectiveness of the proposed work is validated in a PV inverter test system developed in MATLAB/Simulink.

lifetime estimation↗