Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “particle seeding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Measurements of Heat Transfer, Flow, and Pressures in a Simulated Turbine Blade Internal Cooling Passage

An experimental study was made to obtain quantitative information on heat transfer, flow, and pressure distribution in a branched duct test section that had several significant features of an internal cooling passage of a turbine blade. The objective of this study was to generate a set of experimental data that could be used for validation of computer codes that would be used to model internal cooling. Surface heat transfer coefficients and entrance flow conditions were measured at nominal entrance Reynolds numbers of 45,000, 335,000, and 726,000. Heat transfer data were obtained by using a steady-state technique in which an Inconel heater sheet is attached to the surface and coated with liquid crystals. Visual and quantitative flow-field data from particle image velocimetry measurements for a plane at midchannel height for a Reynolds number of 45,000 were also obtained. The flow was seeded with polystyrene particles and illuminated by a laser light sheet. Pressure distribution measurements were made both on the surface with discrete holes and in the flow field with a total pressure probe. The flow-field measurements yielded flow-field velocities at selected locations. A relatively new method, pressure sensitive paint, was also used to measure surface pressure distribution. The pressure paint data obtained at Reynolds numbers of 335,000 and 726,000 compared well with the more standard method of measuring pressures by using discrete holes.

Russell, Louis M.↗
NASA NTRS1987

The first products made in space - Monodisperse latex particles

Monodisperse latex particles developed by seeded emulsion polymerization on various Space Shuttle flights are analyzed. The flight hardware was composed of a monodisperse latex reactor and a support electronics package, and the particles were examined by optical microscopy and TEM. Data on the particle size distributions, larger and smaller off-size particles, and conversion-time curves for the particles are examined and compared to ground-based results. It is observed that the ground-based polymerizations have more coagulum than the flight polymerizations; the flight latex particles have narrower size distributions than the ground particles; and the number of off-size larger particles in the flight particles is smaller than in the ground data.

Vanderhoff, J. W.↗
NASA NTRS1989

Seed population for about 1 MeV per nucleon heavy ions accelerated by interplanetary shocks

Data obtained between 1977 and 1982 by the ISEE 1 and ISEE 3 satellites on the composition of heavy ions of about 1 MeV per nucleon, accelerated in interplanetary shock events which followed solar flare events, are examined. It was found that the average relative abundances for C, O, and Fe in the shock events were very close to those found for energetic ions in the solar flares, suggesting that, at these energies, the shock accelerated particles have the solar energetic particles as their seed population. This hypothesis is supported by the fact that the Fe/O ratio in the solar particle events is very strongly correlated with the Fe/O ratio in associated diffusive shock events.

Tan, L. C.↗
NASA NTRSDate not supplied

Seeding Method for Velocimetry and Visualization of Supersonic Retropropulsion Nozzle Plumes

In the current work, the “Venturi seeder” method for nozzle plumes is improved and studied to determine suitability for particle image velocimetry. This seeding method involves independently pressurizing the primary flow path and a separate seed liquid reservoir, connecting them at the throat of a Venturi contraction upstream of the nozzle. The pressure differential at the throat causes the liquid to enter the nozzle channel where it is atomized into particles by strong shearing forces. This new seeding system was characterized by conducting a series of diagnostics using different exit nozzle pressure ratios and seed reservoir pressures. Shadowgraph imaging confirmed the nozzle plumes to be underexpanded jets. A particle sizing device determined that generated DEHS oil particles had median aerodynamic diameters of 0.67, 0.69, and 0.73 μm for seed liquid reservoir pressure supplies of 0.67, 0.60, and 0.93 MPa and primary flow path pressures of 0.67, 0.76, and 0.93 MPa measured downstream of the Venturi throat, respectively. These diameters were within the threshold for acceptable response time in typical gas flows (≤ 1 μm). PIV experiments were conducted on the nozzle plume for all presented cases; mean axial and transverse velocities appeared as expected for the underexpanded jet structure, including the Mach disk and re-acceleration regions. Additional sizing analysis based on the particle response times across the normal shock again showed particle diameters to be well less than 1 μm for all cases. The results suggest that this method is an inexpensive and relatively simple solution to the problem of seeding nozzle plumes. The method will be used in testing of supersonic retropropulsion models in the Unitary Plan Wind Tunnel at The NASA Langley Research Center in 2022.

particle image velocimetry↗
NASA NTRS1999

Stereo Imaging Velocimetry

A system and a method for measuring three-dimensional velocities at a plurality of points in a fluid employing at least two cameras positioned approximately perpendicular to one another. The cameras are calibrated to accurately represent image coordinates in world coordinate system. The two-dimensional views of the cameras are recorded for image processing and centroid coordinate determination. Any overlapping particle clusters are decomposed into constituent centroids. The tracer particles are tracked on a two-dimensional basis and then stereo matched to obtain three-dimensional locations of the particles as a function of time so that velocities can be measured therefrom The stereo imaging velocimetry technique of the present invention provides a full-field. quantitative, three-dimensional map of any optically transparent fluid which is seeded with tracer particles.

McDowell, Mark↗
NASA NTRS1985

Correcting for particle counting bias error in turbulent flow

An ideal seeding device is proposed generating particles that exactly follow the flow out are still a major source of error, i.e., with a particle counting bias wherein the probability of measuring velocity is a function of velocity. The error in the measured mean can be as much as 25%. Many schemes have been put forward to correct for this error, but there is not universal agreement as to the acceptability of any one method. In particular it is sometimes difficult to know if the assumptions required in the analysis are fulfilled by any particular flow measurement system. To check various correction mechanisms in an ideal way and to gain some insight into how to correct with the fewest initial assumptions, a computer simulation is constructed to simulate laser anemometer measurements in a turbulent flow. That simulator and the results of its use are discussed.

Edwards, R. V.↗
DOE OSTI2021

Transition between Instability and Seeded Self-Modulation of a Relativistic Particle Bunch in Plasma

We use a relativistic ionization front to provide various initial transverse wakefield amplitudes for the self-modulation of a long proton bunch in plasma. We show experimentally that, with sufficient initial amplitude [ ≥ ( 4.1 ± 0.4) MV / m ], the phase of the modulation along the bunch is reproducible from event to event, with 3%–7% (of 2 π ) rms variations all along the bunch. The phase is not reproducible for lower initial amplitudes. We observe the transition between these two regimes. Phase reproducibility is essential for deterministic external injection of particles to be accelerated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Radiobiological experiments with plant seeds aboard the biosatellite Kosmos 1887

The effects of spaceflight factors on the seeds of Arabidopsis thaliana and Crepis capillaris were studied provided with various protective measures: the seeds were located inside the satellite and in open space, protected with aluminium foil and also exposed without the foil cover. When the seeds were in open space without any protection, their viability was found to be suppressed; the survival rate and fertility of plants grown from these seeds were also diminished. An increase in the frequency of chromosome aberrations (CA) and in the number of multiple injuries was registered in this case. Experiments with the aluminium foil shielding showed a decrease in the suppression of the seeds' viability, but mutational changes were found to be even more increased, while the survival and fertility of the plants decreased. An increase in the thickness of shielding resulted in a decrease in the effects up to the level of the control, except for the effects connected with CA and fertility of the plants. Analysis of the results shows that these impairments can be ascribed to the action of single heavy charged particles (HCP). The seeds can be thus regarded as an integral biological 'dosimeter' which allows estimation of the total effects of radiation, ecological and biological factors.

Cosmos 1887 Project↗
NASA NTRS1995

Radiobiological experiments with plant seeds aboard the biosatellite Cosmos 1887

The effects of spaceflight factors on the seeds of Arabidopsis thaliana and Crepis capillaris were studied. The seeds were located inside the satellite in an open space, protected with aluminum foil and also exposed without the foil cover. When the seeds were in open space without any protection, their viability was found to be suppressed; the survival rate and fertility of plants grown from these seeds were also diminished. An increase in the frequency of chromosome aberrations (CA) and in the number of multiple injuries was registered in this case. Experiments with the aluminum foil shielding showed a decrease in the suppression of the seeds' viability, but mutational changes were found to be even more increased, while the survival rate and fertility of the plants decreased. An increase in the thickness of shielding resulted in a decrease in the effects up to the level of the control, except for the effects connected with CA and fertility of the plants. Analysis of the results shows that these impairments can be ascribed to the action of single heavy charged particles (HCP). The seeds can thus be regarded as an integral biological 'dosimeter' which allows estimation of the total effects of radiation, ecological and biological factors.

Benton, E. V.↗
NASA NTRS2015

Particle Image Velocimetry Applications Using Fluorescent Dye-Doped Particles

Polystyrene latex sphere particles are widely used to seed flows for velocimetry techniques such as Particle Image Velocimetry (PIV) and Laser Doppler Velocimetry (LDV). These particles may be doped with fluorescent dyes such that signals spectrally shifted from the incident laser wavelength may be detected via Laser Induced Fluorescence (LIF). An attractive application of the LIF signal is achieving velocimetry in the presence of strong interference from laser scatter, opening up new research possibilities very near solid surfaces or at liquid/gas interfaces. Additionally, LIF signals can be used to tag different fluid streams to study mixing. While fluorescence-based PIV has been performed by many researchers for particles dispersed in water flows, the current work is among the first in applying the technique to micron-scale particles dispersed in a gas. A key requirement for such an application is addressing potential health hazards from fluorescent dyes; successful doping of Kiton Red 620 (KR620) has enabled the use of this relatively safe dye for fluorescence PIV for the first time. In this paper, basic applications proving the concept of PIV using the LIF signal from KR620-doped particles are exhibited for a free jet and a twophase flow apparatus. Results indicate that while the fluorescence PIV techniques are roughly 2 orders of magnitude weaker than Mie scattering, they provide a viable method for obtaining data in flow regions previously inaccessible via standard PIV. These techniques have the potential to also complement Mie scattering signals, for example in multi-stream and/or multi-phase experiments.

Petrosky, Brian J.↗
DOE OSTI2024

Solid Electrolyte Bimodal Grain Structures for Improved Cycling Performance

Here, the application of solid-state electrolytes in Li batteries is hampered by the occurrence of Li-dendrite-caused short circuits. To avoid cell failure, the electrolytes can only be stressed with rather low current densities, severely restricting their performance. As grain size and pore distributions significantly affect dendrite growth in ceramic electrolytes such as Li 7 La 3 Zr 2 O 12 and its variants; here, a “detour and buffer” strategy to bring the superiority of both coarse and fine grains into play, is proposed. To validate the mechanism, a coarse/fine bimodal grain microstructure is obtained by seeding unpulverized large particles in the green body. The rearrangement of coarse grains and fine pores is fine-tuned by changing the ratio of pulverized and unpulverized powders. The optimized bimodal microstructure, obtained when the two powders are equally mixed, allows, without extra interface decoration, cycling for over 2000 h as the current density is increased from 1.0 mA·cm -2 , and gradually, up to 2.0 mA·cm -2 . The “detour and buffer” effects are confirmed from postmortem analysis. The complex grain boundaries formed by fine grains discourage the direct infiltration of Li. Simultaneously, the coarse grains further increase the tortuosity of the Li path. This study sheds light on the microstructure optimization for the polycrystalline solid-state electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Arctic Ice Nucleation Sampling during MOSAiC (INPMOSAIC2) Field Campaign Report

The accelerated rate of warming in the Arctic is of great concern due to potential impacts that include release of greenhouse gases from permafrost, melting glacial ice contributing to sea level rise, and declining sea ice cover exposing the darker ocean surface. These processes induce positive feedbacks and contribute to further warming that affects climate globally. Clouds play a crucial role in regulating the energy reaching the sea ice and snow surfaces, but the magnitude of their effects on surface temperature is not well constrained in the Arctic. Aerosols are an important contributor by serving as seeds for cloud particle formation, but even less is known about their overall impact and origin. In particular, aerosols that serve as ice nucleating particles (INPs) are vastly understudied, especially above the central Arctic Ocean. However, INPs likely play a significant role in arctic mixed-phase cloud (AMPC) microphysics and the resulting impacts of such clouds on the surface energy budget over the sea ice.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Tropospheric aerosols over the western North Atlantic Ocean during the winter and summer deployments of ACTIVATE 2020: life cycle, transport, and distribution

The Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE) is a NASA mission to characterize aerosol–cloud interactions over the western North Atlantic Ocean (WNAO). Such characterization requires understanding of life cycle, composition, transport pathways, and distribution of aerosols over the WNAO. This study uses the GEOS-Chem model to simulate aerosol distributions and properties that are evaluated against aircraft, ground-based, and satellite observations during the winter and summer field deployments in 2020 of ACTIVATE. Transport in the boundary layer (BL) behind cold fronts was a major mechanism for the North American continental outflow of pollution to the WNAO in winter. Turbulent mixing was the main driver for the upward transport of sea salt within and ventilation out of BL in winter. The BL aerosol composition was dominated by sea salt, which increased in the summer, followed by organics and sulfate. Aircraft in situ aerosol measurements provided useful constraints on wet scavenging in GEOS-Chem. The model generally captured observed features such as continental outflow, land–ocean gradient, and mixing of anthropogenic aerosols with sea salt. Model sensitivity experiments with elevated smoke injection heights to the mid-troposphere (versus within BL) better reproduced observations of smoke aerosols from the western US wildfires over the WNAO in the summer. Model analysis suggests strong hygroscopic growth of sea salt particles and their seeding of marine BL clouds over the WNAO (< 35° N). Future modeling efforts should focus on improving parameterizations for aerosol wet scavenging, implementing realistic smoke injection heights, and applying high-resolution models that better resolve vertical transport.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Digital Image Velocimetry

Proposed technique for production of velocity maps from sequences of photographic video images of flows seeded with small particles. In digital image velocimetry, image analyzed by digital Fourier tranformation. Process free of noise, more precise, and consumes less time. Eliminates need to process photographs, indicates directions of velocity vectors unambiguously, and offers increased dynamic ranges. Because all processing performed electronically, eventually capable of mapping flow-velocity fields in real time.

Cho, Y. C.↗
NASA NTRS1991

Planar imaging of the mixing characteristics of a multi-element triplet injector

Planar light scattering has been used to investigate the turbulent mixing in a multi-element triplet injector at mixture ratio conditions typical of liquid rocket engine gas generators. Experiments were conducted at atmospheric pressure using air seeded with smoke particles to simulate the oxidizer flow and unseeded air to simulate the fuel. Data sets of 200 images (containing 122,000 simultaneous measurements each) of the instantaneous distribution of the scattered light were acquired at several positions throughout the flow. These images have been processed digitally to produce local distributions of the average and rms fluctuation of the mixture fraction. In addition, the spatial autocorrelation of the images has been calculated and analyzed to determine a mean length scale related to the large scale structures in the flow.

Makel, D. B.↗
NASA NTRS1994

Stochastic acceleration of energetic ions in Jupiter's magnetosphere

An equation governing the combined radial diffusion and stochastic acceleration of super-Alfvenic ions by magnetohydrodynamic waves in Jupiter's outer magnetosphere is derived. The formulation is based upon a total energy invariant of the adiabatic transport which applies to an isotropic distribution undergoing rapid pitch angle scattering by waves. An analytic solution to the double diffusion equation is obtained and numerical results are presented for two models of ion injection. The first model assumes S(+) and O(+) are injected throughout a broad region of space through photoionization of Jupiter's magnetospheric neutral wind and obtain an initial energy corresponding to the local corotation energy after pickup by the planetary magnetic field. The second model assumes a monoenergetic distribution of energetic protons is implanted in the middle magnetosphere by the action of field-aligned potential drops in Jupiter's auroral ionosphere. For both light and heavy ions the injection process creates a seed population of particles which are further accelerated nonadiabatically by the MHD waves and adiabatically through radial diffusion. A comparison of the theoretical results with a recent data analysis of Voyager low-energy charged particle measurements is made with very good agreement, thus providing a rigorous quantitative account of and definitive explanation for the high-energy ion component of Jupiter's magnetosphere.

Barbosa, D. D.↗