Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Effect of transition metal substitution on elastoplastic properties of LiMn 2 O 4 spinel

LiMn 2 O 4 (LMO) derivatives partially substituted with transition metals (e.g., Ni) have received attention for their higher energy density achieved at higher charge voltage than pure LMO, and may be attractive cathode candidates for emerging all solid state batteries. Accurate mechanical properties of these high voltage spinels are required for prediction of electrode and electrolyte fracture that may compromise battery lifetime and performance. In this work, we quantified the Young’s elastic modulus E and hardness H for LMO, LiMn 1.5 Ni 0.5 O 4 (LMNO), and LiMn 1.5 Ni 0.42 Fe 0.08 O 4 (LMNFO) spinel microparticles via instrumented grid nanoindentation. Elastic modulus E and hardness H increased by more than 40% (up to 145 and 11 GPa, respectively) as a result of Ni or Ni/Fe substitution; such substitution also reduces the lattice parameter and increases the oxidization state of Mn. In conclusion, these results demonstrate how changes in transition metal occupancy can significantly affect the mechanical properties of LMO spinel, and provide critical parameters for designing against fracture in all solid state batteries.

36 MATERIALS SCIENCE↗

An efficient cost reduction procedure for bounded-control LQR problems

A novel approach has been developed for approximating the solution to the constrained LQR problem, based on updating the final state and costate of a related regular problem, and on slightly shifting the switching times (the instants when the control meets the constraints). The main result is the expression of a suboptimal control in feedback form using the solution of some compatible Riccati equation. The gradient method is applied to reduce the cost via explicit algebraic formula for its partial derivatives with respect to the hidden final state/costate of the related regular problem and to the switching times. The numerical method is termed efficient because it does not involve integrations of states or cost trajectories, and reduces to its minimum the dimension of the unknown parameters at the final condition. All the relevant objects are calculated from a few auxiliary matrices, which are computed only once. The scheme is here applied to two case studies whose optimal solutions are known. The first example is a two-dimensional model of the ‘cheapest stop of a train’ problem. The second one refers to the temperature control of a metallic strip leaving a multi-stand rolling mill, a problem with a high-dimensional state.

97 MATHEMATICS AND COMPUTING↗

Exact solution of the relativistic Dunkl oscillator in (2+1) dimensions

In this paper we study the (2+1)-dimensional Dirac–Dunkl oscillator coupled to an external magnetic field. Our Hamiltonian is obtained from the standard Dirac oscillator coupled to an external magnetic field by changing the partial derivatives by the Dunkl derivatives. We solve the Dunkl–Klein–Gordon-type equations in polar coordinates in a closed form. The angular part eigenfunctions are given in terms of the Jacobi–Dunkl polynomials and the radial functions in terms of the Laguerre functions. Also, we compute the energy spectrum of this problem and show that, in the non-relativistic limit, it properly reduces to the Hamiltonian of the two dimensional harmonic oscillator.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis and prediction of reaction kinetics using the degree of rate control

“Degree of rate control” (DRC) analysis provides a quantitative approach for analysing the kinetics of multi-step reaction mechanisms that has been widely applied to both heterogeneous and homogeneous catalysis research, as well as electrocatalysis. The DRC of any given transition state or intermediate is defined as a partial derivative such that it approximately equals the fractional increase in net rate to the product of interest per differential decrease in its standard-state free energy for that species (÷RT), holding constant the standard-state free energies of all other transition states and intermediates. Even very complex mechanisms usually have only a few species with non-zero DRCs and are thus the species whose interactions with the catalyst most strongly affect the net rate. These key DRC values thus offer a simple and intuitive route to optimize catalyst materials, especially with the assistance of computational methods like density functional theory (DFT). These high-DRC species are also the species whose energetics must be most accurately measured or calculated to achieve an accurate kinetic model for any reaction mechanism. In simple cases with a single “rate-determining step”, the DRC for its transition state (TS) is + 1. Catalyst-bound intermediates, on the other hand, often have negative DRCs equal to a small integer times their fractional occupancy of catalyst sites. The apparent activation energy equals a weighted average of the standard-state enthalpies (relative to reactants) of all the species (intermediates, transition states and products) in the reaction mechanism, each weighted by its DRC (+RT). It has been shown that the apparent transfer coefficient in electrocatalysis, an inverted form of the Tafel slope, is a weighted average of the number of electrons transferred to generate each intermediate or product species in the mechanism, weighted again by the DRC. Quantitative analysis of kinetic isotope effects (KIEs, or the ratio of net rates for different reactant isotopes) in complex mechanisms has shown that the logarithm of the KIE equals the weighted average over all species in the mechanism of the difference between the two isotopes in their standard-state free energies (÷RT), again weighted by the DRC. The reaction orders with respect to fluid-phase concentrations of reactants, products and intermediates have also been proven to be directly related to DRCs. Thus, there are numerous experimental observables which equate to short linear combinations of DRCs, so that combinations of experimental measurements might provide access to DRC values. Since its invention for transition states in 1994 and its generalization to include intermediates in 2009, the DRC has thus far mainly been calculated for microkinetic models based either entirely on DFT or on DFT with the key energies (i.e., those for high-DRC species) being fine-tuned to match experiments. The relationships summarized in this work provide new opportunities for using experiments earlier in the development and optimization of microkinetic models that require input from computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computation of magnetic fields from field components on a plane grid

An algorithm is presented to calculate the field components of the magnetic field [B x (x, y, z), B y (x, y, z), B z (x, y, z)] at a point (x, y, z) in space, from the knowledge of the components [B x (x, y) = 0, z), B y (x, y = 0, z), B z (x, y = 0,z)] on a “reference plane”, which is normal to the y-axis at . The algorithm, which is a general one and is not restricted to fields with mid-plane symmetry is based on the Maclaurin series expansion of the magnetic field components at any point in space in terms of the distance (y) of the point from the reference plane. The coefficients of the Maclaurin series expansion are expressed in terms of the on-plane field components and their partial derivatives with respect to spatial coordinates (). The field components are usually generated from magnetic field measurements on a rectangular grid on the plane. This algorithm was employed in 1986 in the RAYTRACE computer code to help calculate the optical properties of magnets and of the Alternating Gradient Synchrotron (AGS) at the Brookhaven National Laboratory (BNL). Here, a general mathematical formulation of this algorithm based on the differential algebraic method was presented by Makino in 2011. This paper presents the step by step derivation of the algorithm and provides the necessary formulas to be introduced by the reader in any computer code which requires the field components generated by magnetic devices. In addition provides an example of the use of the algorithm and its limitations as applied to a Halbach type magnet with or without median plane symmetry.

43 PARTICLE ACCELERATORS↗

Calibration of parallel bond parameters in bonded particle models via physics-informed adaptive moment optimisation

This study proposes an automated calibration procedure for bond parameters in bonded discrete element modelling. By exploring the underlying physical correlations between microscopic parameters of bonds and macroscopic strength parameters of the continuum to be modelled, the microscopic shear strength and tensile strength are identified as independent variables for calibration purpose. Then a physics-informed iterative scheme is proposed to automatically approximate the bond parameters by viewing the micro-macro relation as an implicitly defined mathematical mapping function. As a result of highly non-convex features of this implicit mapping, the adaptive moment estimation (Adam), which is especially suitable for problems with noisy gradients, is adopted as the basic iterative scheme, in conjunction with other numerical techniques to approximately evaluate the partial derivatives involved. The whole procedure offers a simple and effective framework for bond parameter calibration. Finally, a numerical example of SiC ceramic is provided for validation. By compared with some existing calibration methods, the proposed method shows significant advantages in terms of calibration efficiency and accuracy.

42 ENGINEERING↗

Continuous Structural Transition in Glass-Forming Molten Titanate BaTi 2 O 5

The structure of the model titanate glass former BaTi2O5 has been studied over a wide temperature (T) range in the molten, supercooled, and glassy states under conditions of aerodynamic levitation. Both high-energy X-ray diffraction and Ti K-edge X-ray absorption spectroscopy reveal a continuous structural transition involving reduction of the cation-oxygen (and oxygen-cation) average coordination numbers and bond lengths with increasing T. Ti-0 coordination in the moderately supercooled and equilibrium melt follows a linear trend n(Tio) = 5.4(1)- [3.5(7) x 10(-4)]T [K] (1300 <= T <= 1830 K, T-g = 960 K, T-m = 1660 K). Comparison to the melt-quenched glass implies an increase in partial derivative n(Tio)/partial derivative T at lower T, as T-g is approached from above. Both Ba-0 coordination and bond length also decrease at higher T, and the role of Ba addition is to reduce n(Tio) below its value in pure molten TiO2, which is related to the presence of density maxima in molten BaO-TiO2. Density measurements made by imaging of the levitated melt yielded rho(T) = 4.82(55)- 0.0004(3)T in units of K and g cm(-3). While BaTi2O5 glass likely consists of a fully connected Ti-0 network, free of nonbridging oxygen (NBO) [OTi1 and with at least 13(4)% [OTi3] triclusters, the 1835(40) K equilibrium melt contains at least 10(4)% NBO along with 90(4)% bridging oxygen [OTi2]. The results highlight the fact that glasses can be considered as structural analogues of melts only for those melts deeply supercooled into the glass transition region. The results imply possible fictive T dependence of titanate glass structure, suggesting applications as, e.g., laser written waveguides with large refractive indices and refractive index contrasts. The temperature-dependent structure further implies a super-Arrhenian melt viscosity with consequences for glass manufacture, titanate-rich slags produced in iron smelting, TiO2-bearing magmas, and by analogy silicate melts at high pressures, as found in planetary interiors.

36 MATERIALS SCIENCE↗

Degrees of Rate Control at Non(pseudo)steady-State Conditions

The degrees of rate control enable identification of rate-controlling transition states and species during (pseudo-)steady-state reaction. We demonstrate a method for identifying rate-controlling transition states and species at non-(pseudo-)steady-state conditions through modification of the definitions for degrees of rate control and sensitivities by superimposing the condition that time constants of the analytical rate function are kept constant when taking the partial derivatives of rate with respect to the rate constants/free energies. In conclusion, the utility of transient degrees of rate control is demonstrated for catalytic reaction networks to rationalize features of the transient rate including extrema and discontinuities.

42 ENGINEERING↗

Analytical Identification Method of Generalized Short‐Circuit Ratio Using Phasor Measurement Units

This paper introduces a novel analytical approach for the identification of the admittance matrix and the generalized short-circuit ratio (gSCR) in power systems integrated with renewable energy sources. The proposed method leverages voltage and current measurements from phasor measurement units (PMUs) to construct a least squares objective function, which is then solved using matrix calculus and partial derivatives. Unlike conventional optimization algorithms, this approach provides an analytical solution that substantially reduces data requirements, enabling the efficient and accurate identification of the gSCR with smaller datasets. Additionally, its fixed computational complexity allows for real-time updates as new data are collected, ensuring continuous refinement of the system of equations and enabling rapid, precise gSCR calculations. The method also exhibits strong robustness against measurement noise, making it well-suited for practical applications in dynamic power systems. The combination of reduced data requirements, real-time adaptability, noise robustness and fixed computational load establishes this method as a highly efficient and reliable tool for real-time power system stability analysis. Case studies on an EPRI 36-bus system demonstrate the method's effectiveness, highlighting its accuracy in closely matching true gSCR values, even under diverse disturbances and noisy conditions.

Han, Zelei [Hohai University, Nanjing (China)] (OR↗

Global Solutions to the L{sup 2}--Critical Schroedinger--Poisson System

The main purpose of the present paper is to study the global behavior of solutions to the L{sup 2}-critical Schroedinger-Poisson system i{partial_derivative}{sub t}{psi}(t,x)+{delta}{psi}(t,x) = V(t,x){psi}(t,x), (t,x)(set-membership sign)R{sub +}xR{sup 3}, {delta}V(t,x) = -4{pi}|{psi}(t,x)|{sup (8/3)}, {psi}(0,x) = {psi}{sub 0}(x). More precisely, we shall establish the local existence of solutions for initial data {psi}{sub 0} in L{sup 2}(R{sup 3}), as well as the existence of global solutions for small initial data. Finally, we shall prove the existence of scattering operator.

97 MATHEMATICS AND COMPUTING↗

Final state problem for the cubic nonlinear Klein-Gordon equation

We study the final state problem for the nonlinear Klein-Gordon equation, u{sub tt}+u-u{sub xx}={mu}u{sup 3}, t is an element of R,x is an element of R, where {mu} is an element of R. We prove the existence of solutions in the neighborhood of the approximate solutions 2 Re U(t)w{sub +}(t), where U(t) is the free evolution group defined by U(t)=F{sup -1}e{sup -it<{xi}}{sup >}F, <x>={radical}(1+x{sup 2}), F and F{sup -1} are the direct and inverse Fourier transformations, respectively, and w{sub +}(t,x)=F{sup -1}(u{sub +}({xi})e{sup (3/2)i{mu}}{sup <{xi}}{sup >{sup 2}}{sup |u{sub +}{sup ({xi})|{sup 2}}{sup log t}), with a given final data u{sub +} is a real-valued function and parallel <{xi}>{sup 3}<i{partial_derivative}{sub {xi}}>u{sub +}({xi}) parallel {sub L{sup {infinity}}} is small.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inhomogeneous critical nonlinear Schroedinger equations with a harmonic potential

In this paper, we study the Cauchy problem of the inhomogeneous nonlinear Schroedinger equation with a harmonic potential: i{partial_derivative}{sub t}u=-div(f(x){nabla}u)+|x|{sup 2}u-k(x)|u|{sup 4/N}u, x is an element of R{sup N}, N{>=}1, which models the remarkable Bose-Einstein condensation. We discuss the existence and nonexistence results and investigate the limiting profile of blow-up solutions with critical mass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Curvature function and coarse graining

A classic theorem in the theory of connections on principal fiber bundles states that the evaluation of all holonomy functions gives enough information to characterize the bundle structure (among those sharing the same structure group and base manifold) and the connection up to a bundle equivalence map. This result and other important properties of holonomy functions have encouraged their use as the primary ingredient for the construction of families of quantum gauge theories. However, in these applications often the set of holonomy functions used is a discrete proper subset of the set of holonomy functions needed for the characterization theorem to hold. We show that the evaluation of a discrete set of holonomy functions does not characterize the bundle and does not constrain the connection modulo gauge appropriately. We exhibit a discrete set of functions of the connection and prove that in the abelian case their evaluation characterizes the bundle structure (up to equivalence), and constrains the connection modulo gauge up to ''local details'' ignored when working at a given scale. The main ingredient is the Lie algebra valued curvature function F{sub S}(A) defined below. It covers the holonomy function in the sense that expF{sub S}(A)=Hol(l={partial_derivative}S,A).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shear driven electromagnetic drift-waves in a nonuniform dense magnetoplasma

Linear characteristic properties of high- and low-frequency (in comparison with the cyclotron frequency) electromagnetic drift-waves are studied in a nonuniform, dense magnetoplasma (composed of electrons and ions), in the presence of parallel (magnetic field-aligned) velocity shear, by using quantum magnetohydrodynamic model. By applying the drift-approximation (viz., |{partial_derivative} {sub t}|<<{omega}{sub ci}<<{omega}{sub ce}) to the quantum momentum equations, together with the continuity equations and the Poisson equation, we derive the governing equations for electromagnetic drift-waves with the shear flow. These linear equations are then Fourier transformed to obtain the dispersion relation in both high-frequency and low-frequency regimes. The dispersion relations are then discussed under various limiting cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Emergence of wave equations from quantum geometry

We argue that classical geometry should be viewed as a special limit of noncommutative geometry in which aspects which are inter-constrained decouple and appear arbitrary in the classical limit. In particular, the wave equation is really a partial derivative in a unified extra-dimensional noncommutative geometry and arises out of the greater rigidity of the noncommutative world not visible in the classical limit. We provide an introduction to this 'wave operator' approach to noncommutative geometry as recently used[27] to quantize any static spacetime metric admitting a spatial conformal Killing vector field, and in particular to construct the quantum Schwarzschild black hole. We also give an introduction to our related result that every classical Riemannian manifold is a shadow of a slightly noncommutative one wherein the meaning of the classical Ricci tensor becomes very natural as the square of a generalised braiding.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long-run growth rate in a random multiplicative model

We consider the long-run growth rate of the average value of a random multiplicative process x{sub i+1} = a{sub i}x{sub i} where the multipliers a{sub i}=1+ρexp(σW{sub i}₋1/2 σ²t{sub i}) have Markovian dependence given by the exponential of a standard Brownian motion W{sub i}. The average value (x{sub n}) is given by the grand partition function of a one-dimensional lattice gas with two-body linear attractive interactions placed in a uniform field. We study the Lyapunov exponent λ=lim{sub n→∞}1/n log(x{sub n}), at fixed β=1/2 σ²t{sub n}n, and show that it is given by the equation of state of the lattice gas in thermodynamical equilibrium. The Lyapunov exponent has discontinuous partial derivatives along a curve in the (ρ, β) plane ending at a critical point (ρ{sub C}, β{sub C}) which is related to a phase transition in the equivalent lattice gas. Using the equivalence of the lattice gas with a bosonic system, we obtain the exact solution for the equation of state in the thermodynamical limit n → ∞.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational stochastic model of ions implantation

Implantation flux ions into crystal leads to phase transition /PT/ 1-st kind. Damaging lattice is associated with processes clustering vacancies and gaseous bubbles as well their brownian motion. System of stochastic differential equations /SDEs/ Ito for evolution stochastic dynamical variables corresponds to the superposition Wiener processes. The kinetic equations in partial derivatives /KE/, Kolmogorov-Feller and Einstein-Smolukhovskii, were formulated for nucleation into lattice of weakly soluble gases. According theory, coefficients of stochastic and kinetic equations uniquely related. Radiation stimulated phase transition are characterized by kinetic distribution functions /DFs/ of implanted clusters versus their sizes and depth of gas penetration into lattice. Macroscopic parameters of kinetics such as the porosity and stress calculated in thin layers metal/dielectric due to Xe{sup ++} irradiation are attracted as example. Predictions of porosity, important for validation accumulation stresses in surfaces, can be applied at restoring of objects the cultural heritage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗