Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pallet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Spacelab-1: An early space station for science and technology

The scientific capabilities of the Spacelab manned pallet are reviewed, together with the implications of an expansion of the research effectiveness with a free-flying platform. The premier Spacelab flight will carry out earth observations with a metric camera and SAR, atmospheric studies will be performed with imaging spectrometers, and space plasma physics will be examined by injecting particle beams or VLF waves into the near-Shuttle environment. Radiance and spectrum data will be gathered of the sun and UV and X ray information will be recorded from the stars. Experimentation will also be carried out for on-board crystal growth, metallurgy, and glassy material production, as well as the response of biological systems to zero-g conditions and hard space radiation. The telemetry, time, crewmember participation, and on-board controls required for Spacelab operations are outlined. Missions for a space platform for studying the atmosphere/space interface are described.

Knott, K.↗

A solar flare X-ray polarimeter for the Space Shuttle

An instrument has recently been built and tested which is designed to measure the polarization of the hard (5-30 keV) X-ray emission from solar flares, and thereby to investigate the energy release mechanism and constrain flare models. In particular, these measurements will help to determine whether hard X-ray bursts are produced by nonthermal or by thermal electrons. The polarimeter makes use of the angular dependence of Thomson scattering from targets of metallic lithium. It has an energy resolution of a few keV, a time resolution of 5 s, and sufficient sensitivity to measure polarization levels (3 sigma) of a few percent in about 10 s for a moderate strength solar flare. The instrumental polarization has been directly measured and found to be within the design goal of approximately 1%. This polarimeter is scheduled to be flown as part of the OSS-1 pallet on an early Space Shuttle mission.

Lemen, J. R.↗

NASA-ESA Spacelab systems and programs; Proceedings of the Seminar, Washington, DC, April 23, 24, 1981

Topics discussed include the development status of the Space Shuttle and Spacelab, with attention to Spacelab subsystem performance capabilities and Shuttle-Spacelab flight operations; Spacelab data management and software for science applications, ESA and Space Shuttle pointing systems, and the Space Shuttle's Office of Space and Terrestrial Applications (OSTA)-1 payload. Also covered are the lessons learned from the first Spacelab mission, the pallet-only mode verification flight of the second Spacelab mission, the objectives of the Spacelab mission D1, its role in the German space program, and its implementation, the impact of Spacelab on space-based life sciences research, the high resolution, large area modular reflector array X-ray telescope to be used by Spacelab, and Space Shuttle contamination effects on UV coronagraphic observations.

Moore, J. W.↗

Moisture sounding at millimeter wavelengths /94/183 GHz/ at high altitudes

A moisture sounding radiometer at millimeter wavelengths has been developed for high altitude measurements onboard NASA's WB-57F aircraft. Three channels about the 183.3 GHz water vapor line permit measurement of the atmospheric water vapor profile. A single window channel at 94 GHz provides correction for clouds over the ocean and for surface emissivity variations over land. The instrument is an imaging radiometer operating under microprocessor control throughout each data flight. The system is contained within two packages integrated into the WB-57F pallet. A ground support system was used to perform a quick-look analysis of the data collected immediately following each flight.

Gagliano, J. A.↗

Alternate thermal control coolant fluid investigation for the NASA Space Transportation System

Although Freon 21 has been assumed to be the coolant fluid for both the Space Shuttle Orbiter's primary heat rejection system and Spacelab's pallet heat transport loop, the fluid's supplier has considered stopping its production. This fact, together with the recent determination that maximum allowable toxicity levels must be reduced by a factor of 100, has prompted NASA's present investigation of a Freon 21 replacement which would provide comparable heat transport/rejection capability without requiring the redesign of existing hardware. Systems performance was analytically evaluated for many fluids, together with tests establishing material compatibility with alternate fluids and the character of any synergistic effects. Test results have indicated that Freon 114 is a viable alternative for some of the systems in question.

Hueter, U.↗

Studies of beam plasma interactions in a space simulation chamber using prototype Space Shuttle instruments

In March, 1981, electron beam experiments were conducted in a large space simulation chamber using equipment destined to be flown aboard NASA's Office of Space Science-1 pallet (OSS-1). Two major flight experiments were involved. They include the Vehicle Charging and Potential (VCAP) experiment and the Plasma Diagnostics Package (PDP). Apparatus connected with VCAP included a Fast Pulse Electron Gun (FPEG), and a Charge and Current Probe (CCP). A preliminary view is provided of the results obtained when the electron emissions were held steady over relatively long periods of time such that steady state conditions could be obtained with respect to the electron beam interaction with the neutral gases and plasma of the vacuum chamber. Of particular interest was the plasma instability feature known as the Beam Plasma Discharge. For the present experiments the FPEG was used in a dc mode with a range of currents of 2 to 80 mA at a beam energy of 970 eV. Attention is given to the emissions of VLF and HF noise associated with the dc beam.

Banks, P. M.↗

Image motion compensation for the OSS-3/7 telescopes

The three telescope for the NASA Office of Space Science (OSS) Missions 3/7 will be clustered on the Instrument Point System (IPS). The IPS is to be mounted on a Spacelab pallet in the space shuttle orbiter. The three telescopes include the Ultraviolet Imaging Telescope (UIT), the Hopkins Ultraviolet Telescope (HUT), and the Wisconsin Ultraviolet Photopolarimetry Experiment (WUPPE). All three instruments have the ability to view from earth orbit stellar objects which are fainter than those which can be seen with ground-based telescopes. An Image Motion Compensation (IMC) system will be required for the appropriate conduct of the observations. The OSS-3/7 pointing problem is discussed, and a cost effective IMC system is proposed.

Shelton, H.L.↗

41-B tenth Space Shuttle mission

The manned maneuvering unit, two untethered ""spacewalks'', EVA timeline, shuttle pallet satellite, payloads (Palapa-B2, Westar 6), and a rehearsal rendezvous are discussed.

Source record↗

Photovoltaic concentrator pointing dynamics and plasma interaction study

The objectives of this experiment are to use the Space Technology Experiments Platform (STEP) system to demonstrate the viability of concentrator photovoltaic arrays by: (1) configuring a deployable mast on the STEP pallet with concentrator mass models and some active photovoltaic modules; (2) measuring the array pointing dynamics under normal rotation as well as disturbance conditions; (3) performing an array plasma interaction experiment to determine the steady-state plasma losses under various voltage conditions; and (4) providing active distributed control of the support truss to determine the improvement in dynamic response. Experiment approach and test control and instrumentation are described.

Stern, T. G.↗

A deployable structure and solar array controls experiment for STEP

A candidate configuration for a controls experiment on the Space Technology Experiments Platform (STEP) is described. The elements of the experiment are the mast, the solar array, and an articulation module between the two. The characteristic dimensions are very compatible for integration on a pallet such a STEP's proposed configuration. The controls' objective would be the measurement of orbiter interaction as well as the system identification of the appendages. The flight experiment configuration would also provide a test bed for various active vibration controls concepts. The instrumentation being considered would measure accelerations, strains, displacements, and temperatures. The deployable mast has eight elements defining a structural bay. Uniaxial measurements would be required to define loads at a cross section of the structure. Displacements due to thermal distortion of the mast and the local state of the solar concentrator may be measured by an optical ranging technique from the orbiter aft flight deck.

Nishimoto, T. S.↗

The development of a high-capacity instrument module heat transport system, appendixes

Data sheets provide temperature requirements for 82 individual instruments that are under development or planned for grouping on a space platform or pallet. The scientific objectives of these instrument packages are related to solar physics, space plasma physics, astronomy, high energy astrophysics, resources observations, environmental observations, materials processing, and life sciences. System specifications are given for a high capacity instrument module heat transport system to be used with future payloads.

Source record↗

Launch processing for Spacelab 1

The final integration of Spacelab payloads with the Shuttle is described. Attention is given to launch processing planning, schedules, quality control, and problem reports and configuration maintenance. Also covered are the integration and checkout of individual and combined experiments, mounting the end cones, attachment of the transfer tunnel, and inclusion of an extra experiments pallet. The entire Spacelab module was subjected to a full systems simulation before deliverance to the Orbiter bay. Modular parts that were transferred from building-to-building were placed in sealed containers filled with a purged atmosphere during transport.

Mcbrayer, R. O.↗

Modulated beam injection from the Space Shuttle during magnetic conjunctions of STS 3 with the DE 1 satellite

An electron beam emitted from the Office of Space Sciences 1 pallet on STS 3 was pulsed with specially designed very low frequency (VLF) formats in an attempt to generate whistler mode waves. Modulated operations of the beam emitted by a fast pulse electron generator (FPEG) were initiated during times of magnetic conjunctions between STS 3 and the high-altitude DE 1 satellite equipped with broadband VLF receivers. Coordinated FPEG/VLF modulation and DE 1 wideband data acquisition were achieved in 12 different cases. No evidence of any waves generated by FPEG were detected on the DE 1 analog wideband data. However, it is shown that in all of the cases, either the STS 3 attitude was such that the emitted electrons struck the main body of the vehicle, or it was not possible for whistler mode waves to propagate from the STS 3 location up to the vicinity of the DE 1 satellite.

Inan, U. S.↗

Radiation measurements aboard Spacelab 1

The radiation environment inside Spacelab 1 was measured by a set of passive radiation detectors distributed throughout the volume inside the module, in the access tunnel, and outside on the pallet. Measurements of the low linear energy transfer (LET) component obtained from the thermoluminescence detectors ranged from 102 to 190 millirads, yielding an average low LET dose rate of 11.2 millirads/day inside the module, about twice the low LET dose rate measured on previous flights of the Space Shuttle. Because of the higher inclination of the orbit (57 versus 28.5 deg for previous Shuttle flights), substantial fluxes of highly ionizing high charge and energy galactic cosmic ray particles were observed, yielding an overall average mission dose-equivalent of about 150 millirems, more than three times higher than that measured on previous Shuttle missions.

Benton, E. V.↗

Measurements of electromagnetic interference on OV102 Columbia using the plasma diagnostics package

The third Space Shuttle mission's OSS-1 payload included 30 Hz-800 MHz and S-band receivers which assessed the intentional (transmitter) and unintentional (subsystem) EMI levels. It was noted that, at the pallet location, the UHF voice downlink transmitter field strengths did not exceed 0.1 V/m. At the remote manipulator system, the figure was 0.5 V/m. Below 300 kHz, the magnetic field noise was 30 dB pT + or - 20 dB, while the electric field noise was broadband and variable over at least 60 dB, depending on thruster firings and Orbiter attitude. This noise may have been generated by the Orbiter's interaction with the ambient plasma.

Shawhan, S. D.↗

The evolution of small payload carrier systems

The design of a bridge-like structure to span the Space Shuttle cargo bay but occupy only 3 feet of its length is discussed. The new structure was named the Missions Peculiar Equipment Support Structure (MPESS). The basic design requirements were as follows: to serve as support structure for small number of experiments; to occupy the minimal length of cargo bay; to have a standard interface hole pattern; to provide support at an elevated position; to employ standard Spacelab pallet trunnion; and to ensure natural frequency between the STS liftoff and landing frequency. The bridge-like structure is a riveted and bolted truss with machind end fittings which interface with the Spacelab trunnions. The structure is fabricated from aluminum alloy and assembled with stainless steel fasteners.

Breaux, C. G.↗

The design, fabrication and delivery of a spacelab neutral buoyancy Instrument Pointing System (IPS) mockup

Underwater simulations of EVA contingency operations such as manual jettison, payload disconnect, and payload clamp actuation were used to define crew aid needs and mockup pecularities and characteristics to verify the validity of simulation using the trainer. A set of mockup instrument pointing system tests was conducted and minor modifications and refinements were made. Flight configuration struts were tested and verified to be operable by the flight crew. Tasks involved in developing the following end items are described: IPS gimbal system, payload, and payload clamp assembly; the igloos (volumetric); spacelab pallets, experiments, and hardware; experiment, and hardware; experiment 7; and EVA hand tools, support hardware (handrails and foot restraints). The test plan preparation and test support are also covered.

Vanvalkenburgh, C. N.↗