SEARCH · Engineering Papers

Results for “optimum design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Thermoelastic analysis of solar cell arrays and their material properties

A thermoelastic stress analysis procedure is reported for predicting the thermally induced stresses and failures in silicon solar cell arrays. A prerequisite for the analysis is the characterization of the temperature-dependent thermal and mechanical properties of the solar cell materials. Extensive material property testing was carried out in the temperature range -200 to +200 C for the filter glass, P- and N-type silicon, interconnector metals, solder, and several candidate silicone rubber adhesives. The analysis procedure is applied to several solar cell array design configurations. Results of the analysis indicate the optimum design configuration, with respect to compatible materials, effect of the solder coating, and effect of the interconnector geometry. Good agreement was found between results of the analysis and the test program.

Salama, M. A.↗

NASA NTRS1994

Weight minimization of structural components for launch in space shuttle

Minimizing the weight of structural components of the space station launched into orbit in a space shuttle can save cost, reduce the number of space shuttle missions, and facilitate on-orbit fabrication. Traditional manual design of such components, although feasible, cannot represent a minimum weight condition. At NASA Lewis Research Center, a design capability called CometBoards (Comparative Evaluation Test Bed of Optimization and Analysis Routines for the Design of Structures) has been developed especially for the design optimization of such flight components. Two components of the space station - a spacer structure and a support system - illustrate the capability of CometBoards. These components are designed for loads and behavior constraints that arise from a variety of flight accelerations and maneuvers. The optimization process using CometBoards reduced the weights of the components by one third from those obtained with traditional manual design. This paper presents a brief overview of the design code CometBoards and a description of the space station components, their design environments, behavior limitations, and attributes of their optimum designs.

Patnaik, Surya N.↗

NASA NTRS1996

Focal-Plane Analysis For Calculating Antenna Gain

Improved method devised for calculating gain of antenna system comprising main reflector and array of feed elements. Method involves much less computation; important advantage when necessary to compute gains repeatedly, with slight variations in design at each iteration, in effort to find optimum design.

Cramer, Paul W.↗

NASA NTRS2001

Thermal Analysis and Design of Multi-layer Insulation for Re-entry Aerodynamic Heating

The combined radiation/conduction heat transfer in high-temperature multi-layer insulations was modeled using a finite volume numerical model. The numerical model was validated by comparison with steady-state effective thermal conductivity measurements, and by transient thermal tests simulating re-entry aerodynamic heating conditions. A design of experiments technique was used to investigate optimum design of multi-layer insulations for re-entry aerodynamic heating. It was found that use of 2 mm foil spacing and locating the foils near the hot boundary with the top foil 2 mm away from the hot boundary resulted in the most effective insulation design. A 76.2 mm thick multi-layer insulation using 1, 4, or 16 foils resulted in 2.9, 7.2, or 22.2 percent mass per unit area savings compared to a fibrous insulation sample at the same thickness, respectively.

Daryabeigi, Kamran↗

NASA NTRS1996

Reliability, Risk and Cost Trade-Offs for Composite Designs

Risk and cost trade-offs have been simulated using a probabilistic method. The probabilistic method accounts for all naturally-occurring uncertainties including those in constituent material properties, fabrication variables, structure geometry and loading conditions. The probability density function of first buckling load for a set of uncertain variables is computed. The probabilistic sensitivity factors of uncertain variables to the first buckling load is calculated. The reliability-based cost for a composite fuselage panel is defined and minimized with respect to requisite design parameters. The optimization is achieved by solving a system of nonlinear algebraic equations whose coefficients are functions of probabilistic sensitivity factors. With optimum design parameters such as the mean and coefficient of variation (representing range of scatter) of uncertain variables, the most efficient and economical manufacturing procedure can be selected. In this paper, optimum values of the requisite design parameters for a predetermined cost due to failure occurrence are computationally determined. The results for the fuselage panel analysis show that the higher the cost due to failure occurrence, the smaller the optimum coefficient of variation of fiber modulus (design parameter) in longitudinal direction.

Shiao, Michael C.↗

NASA NTRS1980

Application of numerical optimization to the design of wings with specified pressure distributions

A practical procedure for the optimum design of transonic wings is demonstrated. The procedure uses an optimization program based on the method of feasible directions coupled with an aerodynamic analysis program which solves the three-dimensional potential equation for subsonic through transonic flow. Two new wings for the A-7 aircraft were designed by using the optimization procedure to achieve specified surface pressure distributions. The new wings, along with the existing A-7 wing, were tested in the Ames 11 ft transonic wind tunnel. The experimental data show that all of the performance goals were met. However, comparisons of the wind tunnel results with the theoretical predictions indicate some differences at conditions for which strong shock waves occur.

Haney, H. P.↗

NASA NTRS1972

Comparison of two gas chromatograph models and analysis of binary data

The overall objective of the gas chromatograph system studies is to generate fundamental design criteria and techniques to be used in the optimum design of the system. The particular tasks currently being undertaken are the comparison of two mathematical models of the chromatograph and the analysis of binary system data. The predictions of two mathematical models, an equilibrium absorption model and a non-equilibrium absorption model exhibit the same weaknesses in their inability to predict chromatogram spreading for certain systems. The analysis of binary data using the equilibrium absorption model confirms that, for the systems considered, superposition of predicted single component behaviors is a first order representation of actual binary data. Composition effects produce non-idealities which limit the rigorous validity of superposition.

Keba, P. S.↗

NASA NTRS1970

Hypersonic Research Facilities Study - Volume III, Part 2: Phase II Parametric Studies Flight Vehicle Synthesis

Airbreathing hypersonic aircraft employing liquid hydrogen fuel have the potential of satisfying a number of mission requirements in the 1980-2000 time period. However, major advances in the technological state of the art are necessary before such aircraft can be considered either feasible or practical. The objective was to assess the research and development requirements for hypersonic aircraft and based on these requirements, to provide the NASA with characteristics of a number of desirable hypersonic research facilities. The study is organized in three phases. Phase I was a preliminary analysis of a broad group of concepts which were reduced to seven flight research facilities and eleven ground research facilities for Phase II study. The purpose of Phase II was to perform parametric studies to refine the facility designs and obtain sensitivity information in the neighborhood of "near optimum" designs, and to select those facilities that appear most attractive in the sense of research potential vs cost for further refinement in Phase III. This part of Volume III presents the results of the synthesis of the flight research facilities.

Source record↗

NASA NTRS1977

Preliminary Design and Fabrication Assessment for Two Solar Sail Candidates

Primary emphasis is directed to the spinning sail design and fabrication assessment. Several methods of fabricating the spinning sail blades are presented and compared. Evaluations are made of each proposed design, as well as the baseline design. These efforts resulted in the recommendation of an apparent optimum design and fabrication plan with an assessment of the major advantages/disadvantages of each concept considered.

Weis, R.↗

NASA NTRS1994

Optimization of aerospace structures

Research carried out is grouped under two topics: (1) Design Optimization, and (2) Integrated Force Method of Analysis. Design Optimization Research Topics are singularity alleviation enhances structural optimization methods, computer based design capability extended through substructure synthesis, and optimality criteria provides optimum design for a select class of structural problems. Integrated Force Method of Analysis Research Topics are boundary compatibility formulation improves stress analysis of shell structures. Brief descriptions of the four topics are appended.

Keith, Theo G., Jr.↗

NASA NTRS1992

Analytical formulation of optimum rotor interdisciplinary design with a three-dimensional wake

An analytical formulation of optimum rotor interdisciplinary design is presented. A finite-state aeroelastic rotor model, coupling generalized dynamic wake with blade finite elements, is applied to perform the optimum rotor blade design for improved aerodynamic performance and vehicle vibration, while a feasible direction nonlinear optimizer, CONMIN, provides the optimization algorithm. The approach features a systematic rotor aeroelastic model which offers an efficient analytical tool, and retains necessary aerodynamic and blade dynamic building blocks for a sufficient rotor dynamic response analysis. The formulation is well suited for an efficient design sensitivity computation without resorting to finite difference, and thus provides a practical design tool. The results show improved rotor aerodynamic performance and reduced hub vibratory loads for the optimized blade as compared to the advanced rotor of reference design.

He, Chengjian↗

NASA NTRS1985

A new 70-meter antenna quadripod with reduced RF blockage

The new subreflector mount (quadripod) for the 64-meter to 70-meter antenna extension project was the result of many trial designs aimed at reducing radio frequency spherical and plane wave blockage and minimizing structural weight while satisfying strength and natural frequency requirements. An optimum design emerged which has a gain improvement of 0.32 dB over the present 64-meter design. Some of the trial designs made and the final optimum configuration selected are described.

Cucchissi, J. J.↗

NASA NTRS1992

Designing Assemblies Of Plates

VICONOPT calculates vibrations and instabilities of assemblies of prismatic plates. Designed for efficient, accurate analysis of buckling and vibration, and for optimum design of panels of composite materials. Written in FORTRAN 77.

Williams, F. W.↗

NASA NTRS1971

A pseudo-noise transponder design for low data rate users of the tracking and data relay satellite system

A compromise optimum design for the low data rate users of the Tracking and Data Relay Satellite System (TDRSS) is presented. Design goals for the TDRSS are employed in this report to arrive at the transponder design. Multipath, R.F.I., antenna pattern anomolies, other user signals, and other definable degrading factors are included as trade-off parameters in the design. Synchronization, emergency voice, user stabilization, polarization diversity and error control coding are also considered and their impact on the transponder design is evaluated.

Birch, J. N.↗

NASA NTRS1982

Helicopter vibration suppression using simple pendulum absorbers on the rotor blade

A comprehensive anaytical design procedure for the installation of simple pendulums on the blades of a helicopter rotor to suppress the root reactions is presented. A frequency response anaysis is conducted of typical rotor blades excited by a harmonic variation of spanwise airload distributions as well as a concentrated load at the tip. The results presented included the effect of pendulum tuning on the minimization of the hub reactions. It is found that a properly designed flapping pendulum attenuates the root out-of-plane force and moment whereas the optimum designed lead-lag pendulum attenuates the root in-plane reactions. For optimum pendulum tuning the parameters to be determined are the pendulum uncoupled natural frequency, the pendulum spanwise location and its mass. It is found that the optimum pendulum frequency is in the vicinity of the excitation frequency. For the optimum pendulum a parametric study is conducted. The parameters varied include prepitch, pretwist, precone and pendulum hinge offset.

Pierce, G. A.↗

NASA NTRS1980

Optimum subsonic, high-angle-of-attack nacelles

Many proposed advanced aircraft - but especially tilt-nacelle, subsonic-cruise, V/STOL aircraft - require nacelles that operate over a wide range of aerodynamic conditions. The optimum design of such nacelles and their inlets is described, including how the inlet low-speed design conditions are selected, the conditions for which the various regions of the inlet are designed, and appropriate criteria of merit. For low-speed operation the optimum internal surface velocity distributions and skin friction distributions are described for three categories of inlets: those without boundary-layer control (BLC), those with BLC, and those with blow-in door slots and retractable slats. Experimental results are presented that show the performance of the various types of inlets. At cruise speed the effect of factors that reduce the nacelle external surface area and the local skin friction is illustrated. These factors are cruise Mach number, inlet throat size, fan-face Mach number, and nacelle contour. The interrelation of these cruise-speed factors with the design requirements for good low-speed performance is discussed. Finally an inlet design without BLC and an optimized inlet design with slots and slats are compared to illustrate the possible reductions in nacelle size.

Luidens, R. W.↗

NASA NTRS1988

Aerodynamic characteristics of wings designed with a combined-theory method to cruise at a Mach number of 4.5

A wind-tunnel study was conducted to determine the capability of a method combining linear theory and shock-expansion theory to design optimum camber surfaces for wings that will fly at high-supersonic/low-hypersonic speeds. Three force models (a flat-plate reference wing and two cambered and twisted wings) were used to obtain aerodynamic lift, drag, and pitching-moment data. A fourth pressure-orifice model was used to obtain surface-pressure data. All four wing models had the same planform, airfoil section, and centerbody area distribution. The design Mach number was 4.5, but data were also obtained at Mach numbers of 3.5 and 4.0. Results of these tests indicated that the use of airfoil thickness as a theoretical optimum, camber-surface design constraint did not improve the aerodynamic efficiency or performance of a wing as compared with a wing that was designed with a zero-thickness airfoil (linear-theory) constraint.

Mack, Robert J.↗

NASA NTRS1984

The ADS general-purpose optimization program

The mathematical statement of the general nonlinear optimization problem is given as follows: find the vector of design variables, X, that will minimize f(X) subject to G sub J (x) + or - 0 j=1,m H sub K hk(X) = 0 k=1,l X Lower I approx less than X sub I approx. less than X U over I i = 1,N. The vector of design variables, X, includes all those variables which may be changed by the ADS program in order to arrive at the optimum design. The objective function F(X) to be minimized may be weight, cost or some other performance measure. If the objective is to be maximized, this is accomplished by minimizing -F(X). The inequality constraints include limits on stress, deformation, aeroelastic response or controllability, as examples, and may be nonlinear implicit functions of the design variables, X. The equality constraints h sub k(X) represent conditions that must be satisfied precisely for the design to be acceptable. Equality constraints are not fully operational in version 1.0 of the ADS program, although they are available in the Augmented Lagrange Multiplier method. The side constraints given by the last equation are used to directly limit the region of search for the optimum. The ADS program will never consider a design which is not within these limits.

Vanderplaats, G. N.↗