Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical amplifiers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Sub-single exciton optical gain threshold in colloidal semiconductor quantum wells with gradient alloy shelling

Colloidal semiconductor quantum wells have emerged as a promising material platform for use in solution-processable lasers. However, applications relying on their optical gain suffer from nonradiative Auger decay due to multi-excitonic nature of light amplification in II-VI semiconductor nanocrystals. Here, we show sub-single exciton level of optical gain threshold in specially engineered CdSe/CdS@CdZnS core/crown@gradient-alloyed shell quantum wells. This sub-single exciton ensemble-averaged gain threshold of (Ng)≈ 0.84 (per particle) resulting from impeded Auger recombination, along with a large absorption cross-section of quantum wells, enables us to observe the amplified spontaneous emission starting at an ultralow pump fluence of ~ 800 nJ cm –2 , at least three-folds better than previously reported values among all colloidal nanocrystals. Finally, using these gradient shelled quantum wells, we demonstrate a vertical cavity surface-emitting laser operating at a low lasing threshold of 7.5 μJ cm –2 . These results represent a significant step towards the realization of solution-processable electrically-driven colloidal lasers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Towards a Next Generation Search for Time-Reversal Violation Using Optically Addressable Nuclei in Cryogenic Solids (Final Technical Report, September 2018 - August 2023)

Certain rare pear-shaped nuclei have unmatched sensitivity to new kinds of forces between subatomic particles that are not the same when the arrow of time is reversed. Such forces are believed to be responsible for the near absence of antimatter in the observable Universe. These rare isotopes, some for the first time, will be produced in large numbers at the Facility for Rare Isotope Beams currently under operating at Michigan State University providing an unprecedented opportunity to probe for new physics. In anticipation, we are using abundant isotopes to develop new techniques to manipulate nuclei embedded inside an optically transparent solid at cryogenic temperatures. Implantation into a solid, such as neon and argon, is potentially an effective way to both efficiently capture and repeatedly probe the small number of rare nuclei, such as radium and protactinium. An optically transparent host medium at cryogenic temperatures would allow for the laser manipulation of the nuclei in a thermally quiet and stable environment for a wide variety of guest species such as polar molecules. In such systems, the nuclei are exposed to extraordinarily large electric fields and magnetic field gradients, which significantly amplifies the measurability of certain time-reversal violating effects. The potential sensitivity of this new approach could be at least a few hundred times greater than the current leading experiment which uses stable mercury atoms. We report on the design considerations and preliminary performance of an instrument used to produce and implant molecules into a frozen argon solid.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Moore Machine Motion Controls Refurbishment Statement of Work and Specification

Diamond Turning Machines known as “Moore” machines are used in the production of Potassium diHydrogen Phosphate (KDP) optics required for the National Ignition Facility (NIF). These machines are owned by the Department of Energy, as provided by Lawrence Livermore National Security LLC (LLNS). Moore Machines 1 and 2 are located at the Gooch & Housego (G&H) facility in Highland Heights, OH. The existing Aerotech motion controllers, motor drivers/amplifiers, input/output (I/O) hardware, control computer, software user interface, human machine interface (HMI), cabling, and encoders are beyond service life and require replacement. This Statement of Work (SoW) defines the motion control system refurbishment requirements for the Moore diamond turning machines designated Moore 1 and Moore 2. The motion controls system design shall include a motion control computer, control software, motor drive amplifiers and controllers, linear scale encoders, rotary encoders, HMI, power distribution, emergency stop (E-Stop) and interlocks, cabling, switches, solenoids, transducers, sensors, actuators, ancillary system interfaces, and related components necessary for a complete machine tool control system. The Subcontractor shall include effort to standardize systems between the two machines if reasonably possible.

42 ENGINEERING↗
DOE OSTI2022

High resolution atomic force microscopy with an active piezoelectric microcantilever

Active microcantilevers with on-chip sensing and actuation provide significant advantages in tapping mode Atomic Force Microscopy (AFM). Collocated transduction allows for effective manipulation of cantilever dynamics through feedback control, enabling higher scan rates. However, the adjacency of the sensing and actuation electrodes is known to result in a high level of feedthrough, leading to a low imaging resolution. Readout circuit noise further deteriorates the imaging precision. Here, we investigate the noise sources that affect AFM microcantilevers with collocated aluminum nitride (AlN) actuator–sensor pairs. We reported these cantilevers in earlier work and demonstrated that they display a very low level of feedthrough between the actuation and sensing electrodes. We present a high signal-to-noise ratio (SNR) sensing method that enables us to demonstrate high-resolution AFM on a calibration grating with nm-step silicon carbide (SiC) terraces. In conclusion, measuring the Lorentzian response of the cantilever’s Brownian motion with the on-chip active sensor at resonance enables us to calibrate the dynamic stiffness at the first fundamental resonance mode, without utilizing an optical sensor.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Cage Balancing Enhances Optoelectronic and Lasing Performance in Stable Quasi-2D Tin Iodide Perovskites

Two-dimensional (2D) tin halide perovskites are highly tunable and low-toxicity semiconductors, promising for next-generation optoelectronics. However, achieving air stability and excellent photophysical properties simultaneously necessitates deliberate structure tuning using organic spacer cations and A-site cations. Here, we report a series of new quasi-2D Ruddlesden–Popper tin halide perovskites using a fluorinated aromatic spacer cation, 4-fluorophenethylammonium (4FPEA), and systematically investigate the impacts of layer thickness, spacer cation, and A-site cation on the crystal structures and optical properties of (4FPEA) 2 (A) n−1 S n I 3n+1 . These 4FPEA-based 2D tin perovskites, further tuned by the A-cations, exhibit uniquely undistorted 180° out-of-plane Sn–I–Sn bond angles and low octahedral distortions compared to other quasi-2D perovskites and demonstrate prolonged air stability, excellent photophysics, and amplified spontaneous emission and lasing in exfoliated microflakes. A comprehensive survey of reported n = 2 lead and tin iodide perovskites reveals that all structures can be classified into three types (tilted, balanced, and buckled) based on the structural distortion parameters of their perovskite cages. Notably, (4FPEA) 2 (A)Sn 2 I 7 are among the handful of “balanced” n = 2 perovskites with minimal distortion and excellent optoelectronic performance. Furthermore, the structural insights and cage-balancing approach revealed herein motivate the deliberate design of quasi-2D perovskites through the synergy of the spacer and cage cations, further paving the way for high-performance optoelectronic applications of stable tin halide perovskites.

Cations↗
DOE OSTI2020

Laser induced damage in coatings for cryogenic Yb:YAG active mirror amplifiers

We report results of a study of the laser induced damage threshold (LIDT) behavior of ion beam sputtered H f O 2 / S i O 2 multilayer coatings on Yb:YAG using 1-on-1 and N-on-1 test protocols. The tests were conducted at ambient, vacuum, and cryogenic conditions using 280 ps pulses at λ <#comment/> = 1030 n m . The 1-on-1 LIDT of antireflection (AR) stacks is found to be only slightly reduced under vacuum and cryogenic conditions, while that of high reflectivity (HR) stacks is insensitive to environmental conditions within the uncertainty of the measurements. Cryogenic N-on-1 tests show the LIDT of the HR coating is almost the same as in the 1-on-1 tests. Conversely, the cryogenic N-on-1 test of the AR coating shows damage at ∼ <#comment/> 13 J / c m 2 , a fluence lower than the 20.4 J / c m 2 of 1-on-1 tests. The AR damage behavior is found to be affected by imperfections at the Yb:YAG surface. These findings show that high surface quality is required to increase energy extraction from active mirror laser amplifiers.

Wang, Hanchen↗
DOE OSTI2021

A Comprehensive Survey of Readout Strategies for SiPMs Used in Nuclear Imaging Systems

Silicon photomultipliers (SiPMs) offer advantages such as lower relative cost, smaller size, and lower operating voltages compared to photomultiplier tubes. A SiPM’s readout circuit topology can significantly affect the characteristics of an imaging array. In nuclear imaging and detection, energy, timing, and position are the primary characteristics of interest. Nuclear imaging has applications in the medical, astronomy, and high energy physics fields, making SiPMs an active research area. This work is focused on the circuit topologies required for nuclear imaging. We surveyed the readout strategies including the front end preamplification topology choices of transimpedance amplifier, charge amplifier, and voltage amplifier. In addition, a review of circuit topologies suitable for energy, timing, and position information extraction was performed along with a summary of performance limitations and current challenges.

42 ENGINEERING↗
DOE OSTI2024

Electron Spin Polarization in Large Electric Fields

This project investigated the effects of large electric fields on electron spin polarization in semiconductors, which is of interest for spin-based electronics (“spintronics”) and quantum information processing. It has been theoretically proposed that large electric fields could potentially preserve or amplify electron spin polarization, which would make it easier to generate, transport, and detect spin polarization in spin-based devices; however, previous measurements had not measured the response of electron spin polarization at large electric fields. During this project, methods to perform measurements of electron spin polarization at large electric fields were developed and performed using ultrafast time- and spatially-resolved magneto-optical spectroscopy, high-voltage pulses, and lock-in detection. The device geometry was engineered to reduce the threshold voltage required to reach the Gunn threshold, and the effect of optical illumination on the sample conductivity and Gunn oscillations was investigated. Electron spin polarization measurements were performed at electric fields up to and beyond the Gunn threshold for the device. The measurements showed that the electron spin polarization magnitude decreased with increasing electric field in the devices measured, and a spin amplification effect was not observed. However, these effects could potentially exist in a different material or in a material with a different doping concentration or in a different device geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantum entanglement distribution coexisting with high-rate, broadband classical optical communications over a real-world fiber connecting remote, synchronized nodes

Compatibility with existing classical network infrastructure offers a scalable path towards deploying large-scale quantum networks. Here, we demonstrate O-band polarization-encoded quantum entanglement distribution over an installed 24.4-km fiber while coexisting with a state-of-the-art fully loaded C-band classical communications line system and a picosecond-level precision L-band synchronization signal. The classical system carries two 800-Gbps channels while the remainder of the C-band is filled with amplified spontaneous emission, as is standard for such state-of-the-art communications systems. We examine the spontaneous Raman scattering spectrum generated from this broadband C-band light and offer insights into wavelength allocation for O-band quantum channels. Optimal wavelength selection and narrow filtering enable well-preserved Bell state fidelity when coexisting with 21.4-dBm aggregate launch power across the C-band suitable for 36-Tbps transmission. To the best of our knowledge, this is the first implementation of entanglement-based quantum communications between two remote nodes coexisting with independent classical communications traffic. We demonstrate coexistence of quantum entanglement with ultra-high power levels and record classical bandwidth, offering promise for real-world entanglement-based networking integrated within high-capacity communications infrastructure.

Talcott, Gina M. [Northwestern U.] (ORCID:00000002↗
DOE OSTI2024

Ultra-Long Distance BOTDA Sensor System Employing Hybrid Amplification and Advanced Noise Reduction Techniques

Brillouin Optical Time Domain Analysis (BOTDA) sensor systems play a pivotal role in distributed sensing, which enables precise measurements of strain and temperature across extensive fiber lengths. This research offers a comprehensive strategy to extend the sensing range of BOTDA systems beyond tens of kilometers while maintaining high spatial resolutions. Such enhanced sensing is realized through the integration of distributed Raman amplification, inline amplification using erbium-doped fiber amplifiers (EDFA), and advanced noise reduction techniques. Optimizing Raman pump and probe wave profiles ensures the robustness of Brillouin scattering signals, effectively countering attenuation-induced losses. Additionally, enhancing weak Brillouin signals by strategically placing EDFAs at optimal fiber locations keeps sensor sensitivity high. Leveraging inherent redundancy in measured data as a function of frequency and fiber distance, the non-local means (NLM) filter removes noise while preserving essential physical information. In summary, this research has shown a holistic exploration of extending BOTDA’s distance sensing capabilities up to 150 km with spatial resolutions of 8 meters.

Bhatta, Hari↗
DOE OSTI2020

Cooperative response of magnetism and superconductivity in the magnetic superconductor RbEuFe 4 As 4

Herein, we present a study of the magnetic-flux evolution in the magnetic superconductor RbEuFe 4 As 4 performed using magneto-optical imaging and magnetization measurements during field cooling and warming and magnetic field cycling at temperatures above and below the magnetic transition point, T$_m$. The vortex patterns emerging at T ≲ T$_m$ reveal that the Eu-spin subsystem serves as an internal pump of the magnetic flux while the superconducting critical current controls the delivery of magnetic-flux quanta into the bulk. The interplay of magnetic susceptibility amplifying the magnetic induction and vortex pinning attenuating the magnetic-flux entry results in a field- and temperature-dependent critical state that emulates a paramagnetic Meissner effect. The observed vortex dynamics corresponds to a nontrivial spatial current distribution and yields a self-consistent inhomogeneous enhancement of the sample magnetization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Photonic time-crystals - fundamental concepts [Invited]

Photonic Time-Crystals (PTCs) are materials in which the refractive index varies periodically and abruptly in time. This medium exhibits unusual properties such as momentum bands separated by gaps within which waves can be amplified exponentially, extracting energy from the modulation. This article provides a brief review on the concepts underlying PTCs, formulates the vision and discusses the challenges.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Significantly enhanced near-field coupling via tip engineering

The ability to significantly enhance near-field coupling between light and matter at the nanoscale is crucial for advancing the fields of nanophotonics and nanopolariotonics. However, conventional probes face challenges in achieving optimal light–matter interaction. In this study, we propose a novel, to the best of our knowledge, simulation-based strategy that leverages tip engineering to dramatically amplify the scattering field through tailored double-layer geometries. By employing a core-shell structure with a thin shell layer optimized for specific dielectric permittivity and effective polarizability, we demonstrate a near-field enhancement of up to 10 times compared to conventional probes. Our findings highlight exciting new possibilities for optimizing near-field interactions through probe designs with customized resonances, paving the way for substantially improved nano-optical sensing, imaging, and detection.

Shiravi, H.↗
DOE OSTI2023

Modeling the Amplfied OSC Experiment at IOTA

Optical Stochastic Cooling (OSC), a beam cooling technique based on Stochastic Cooling, is in the early stages of experimental development. It uses radiation produced by the beam in an undulator magnet (the pickup) to correct the momentum deviation of particles downstream in another undulator (the kicker). The OSC mechanism was recently demonstrated at Fermilabʼs IOTA ring using a passive configuration. However, the cooling rate of OSC can be dramatically increased by first amplifying the undulator radiation before applying the corrective kick. In collaboration with the IOTA experiment, we developed a computational model of the OSC mechanism. This work presents beam‐dynamics simulations of the amplified‐OSC configuration. We implement a model of intrabeam scattering and study the effects on beam equilibrium and diffusion rate as a function of bunch charge. Finally, we investigate the phase‐space dynamics with various coupling configurations between the transverse and longitudinal planes.

Dick, A. J.↗
DOE OSTI2025

Laser system design and critical technologies for the NSF OPAL project

The three-year NSF OPAL project is completing the preliminary design of a 2 x 25-PW all-optical parametric chirped-pulse amplification (OPCPA) system capable of delivering 500-J, 20-fs pulses. The design includes two Alpha beamlines that can be co-timed and pointed into two experimental areas for high-intensity research in several configurations. Additionally, a more flexible 2-PW Beta beam can be used in place of one Alpha beam to allow a wider range of focusing geometries and synchronized electron-beam generation for diverse experimental applications. Here, building on the development of the mid-scale MTW-OPAL prototype system, the NSF OPAL project also focuses on advancing essential technologies, such as large-grating fabrication techniques and actively-cooled disk amplifiers.

42 ENGINEERING↗
DOE OSTI2022

Engineering the radiative dynamics of thermalized excitons with metal interfaces

As a platform for optoelectronic devices based on exciton dynamics, monolayer transition metal dichalcogenides (TMDCs) are often placed near metal interfaces or inside planar cavities. While the radiative properties of point dipoles at metal interfaces has been studied extensively, those of excitons, which are delocalized and exhibit a temperature-dependent momentum distribution, lack a thorough treatment. Here, we analyze the emission properties of excitons in TMDCs near planar metal interfaces and explore their dependence on exciton center-of-mass momentum, transition dipole orientation, and temperature. Defining a characteristic energy scale k B T c = ($\hbar k$) 2 /2m (k being the radiative wavevector and m the exciton mass), we find that at temperatures T $\gg$ T c and low densities where the momentum distribution can be characterized by Maxwell-Boltzmann statistics, the modified emission rates (normalized to free space) behave similarly to point dipoles. This similarity in behavior arises due to the broad nature of wavevector components making up the exciton and point dipole emission. On the other hand, the narrow momentum distribution of excitons for T < T c can result in significantly different emission behavior as compared to point dipoles. These differences can be further amplified by considering excitons with a Bose Einstein distribution at high phase space densities, such as in a condensate phase. We find suppression or enhancement of emission relative to the point dipole case by several orders of magnitude. These insights can help optimize the performance of optoelectronic devices that incorporate 2D semiconductors near metal electrodes and can inform future studies of exciton radiative dynamics at low temperatures. Additionally, these studies show that nanoscale optical cavities are a viable pathway to generating long-lifetime exciton states in TMDCs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Plasmonic hybrid core-shell (HyCoS) AgPt NP template hybridized with GQDs for SERS enhancement of 4-MBA and BT

Surface-enhanced Raman spectroscopy (SERS) is an attractive vibrational spectroscopic technique that can enable a non-destructive and ultra-sensitive detection down to the single-molecule level. Herein, a novel hybrid SERS platform is developed based on hybrid core-shell (HyCoS) AgPt nanoparticles (NPs) and graphene quantum dots (GQDs) for the enhancement of Raman vibration of 4-mercaptobenzoic acid (4-MBA) and benzenethiol (BT). The unique design of HyCoS AgPt NPs induces strong electromagnetic mechanism (EM) enhancement through the amplification of electromagnetic fields by the excitation of high-density surface plasmons and hot spots. Superior localized surface plasmon resonance (LSPR) is generated by the AgPt core-shell and background Ag NP coupling, which is systematically investigated by the optical properties and FDTD simulations. The background Ag NPs can further increase the coverage of metallic NPs, leading to higher-density hot spots and enhanced SERS response. At the same time, GQDs can provide plentiful accessible edges for the charge transfer to the HOMO and LUMO of 4-MBA and BT based on the chemical mechanism (CM) enhancement. The mixing approach of GQDs and target molecules on the HyCoS AgPt NPs can significantly amplify the Raman signals via the strong adsorption of probe molecules by the π – π interaction. The enhancement factors of proposed SERS platform can reach ~107 and ~105 for the 4-MBA and BT respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Plasmonic hybrid core-shell (HyCoS) AgPt NP template hybridized with GQDs for SERS enhancement of 4-MBA and BT

Surface-enhanced Raman spectroscopy (SERS) is an attractive vibrational spectroscopic technique that can enable a non-destructive and ultra-sensitive detection down to the single-molecule level. Herein, a novel hybrid SERS platform is developed based on hybrid core-shell (HyCoS) AgPt nanoparticles (NPs) and graphene quantum dots (GQDs) for the enhancement of Raman vibration of 4-mercaptobenzoic acid (4-MBA) and benzenethiol (BT). The unique design of HyCoS AgPt NPs induces strong electromagnetic mechanism (EM) enhancement through the amplification of electromagnetic fields by the excitation of high-density surface plasmons and hot spots. Superior localized surface plasmon resonance (LSPR) is generated by the AgPt core-shell and background Ag NP coupling, which is systematically investigated by the optical properties and FDTD simulations. The background Ag NPs can further increase the coverage of metallic NPs, leading to higher-density hot spots and enhanced SERS response. At the same time, GQDs can provide plentiful accessible edges for the charge transfer to the HOMO and LUMO of 4-MBA and BT based on the chemical mechanism (CM) enhancement. The mixing approach of GQDs and target molecules on the HyCoS AgPt NPs can significantly amplify the Raman signals via the strong adsorption of probe molecules by the π–π interaction. The enhancement factors of proposed SERS platform can reach ~10 7 and ~10 5 for the 4-MBA and BT respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗