Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observer mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

The Operation and Evolution of the Swift X-ray Telescope

The Swift X-ray Telescope (XRT) is a CCD based X-ray telescope designed for localization, spectroscopy and long term light curve monitoring of Gamma-Ray Bursts and their X-ray afterglows. Since the launch of Swift in November 2004, the XRT has undergone significant evolution in the way it is operated. Shortly after launch there was a failure of the thermo-electric cooler on the XRT CCD, which led to the XRT team being required to devise a method of keeping the XRT CCD temperature below 50C utilizing only passive cooling by minimizing the exposure of the XRT radiator to the Earth. We present in this paper an update on how the modeling of this passive cooling method has improved in first -1000 days since the method was devised, and the success rate of this method in day-to-day planning. We also discuss the changes to the operational modes and onboard software of the XRT. These changes include improved rapid data product generation in order to improve speed of rapid Gamma-Ray Burst response and localization to the community; changes to the way XRT observation modes are chosen in order to better fine tune data aquisition to a particular science goal; reduction of "mode switching" caused by the contamination of the CCD by Earth light or high temperature effects.

Kennea, Jamie↗

Observation of Square-Planar Distortion in Lanthanide-Doped Skutterudite Crystals

Skutterudite crystals are of interest for their thermoelectric properties and in particular for the flexibility the structure offers for tuning such properties. One strategy to enhance the thermoelectric capabilities of these structures is to dope the “cage” site to disrupt phonon modes. Observation of such changes in these structures on the atomic scale is challenging, however, and understanding atomic-scale changes is crucial to understanding its macroscopic properties. Here, a series of polycrystalline Co2Ni2Sb8Sn4 skutterudites doped with Ce, Dy, and Yb were synthesized. Using scanning transmission electron microscopy, we observe small tilts in the square-planar Sb–Sn rings. Using density functional theory to calculate a relaxed structure, we attribute these distortions to under-bonding of the rings with the lanthanide dopants.

36 MATERIALS SCIENCE↗

Influence of Cloud, Fog, and High Relative Humidity during Pollution Transport Events in South Korea: Aerosol Properties and PM2.5 Variability

This investigation examines aerosol dynamics during major fine mode aerosol transboundary pollution events in South Korea primarily during the KORUS-AQ campaign from May 1 – June 10, 2016, particularly when cloud fraction was high and/or fog was present to quantify the change in aerosol characteristics due to near-cloud or fog interaction. We analyze the new AERONET Version 3 data that have significant changes to cloud screening algorithms, allowing many more fine-mode observations in the near vicinity of clouds or fog. Case studies for detailed investigation include May 25–26, 2016 when cloud fraction was high over much of the peninsula, associated with a weak frontal passage and advection of pollution from China. These cloud-influenced Chinese transport dates also had the highest aerosol optical depth (AOD), surface PM2.5 concentrations and fine mode particle sizes of the entire campaign. Another likewise cloud/high relative humidity (RH) case is June 9 and 10, 2016 when fog was present over the Yellow Sea that appears to have affected aerosol properties well downwind over the Korean peninsula. In comparison we also investigated aerosol properties on air stagnation days with very low cloud cover and relatively low RH (May 17 & 18, 2016), when local Korean emissions dominated. Aerosol volume size distributions show marked differences between the transport days (with high RH and cloud influences) and the local pollution stagnation days, with total column-integrated particle fine mode volume being an order of magnitude greater on the pollution transport dates. The PM2.5 over central Seoul were significantly greater than for coastal sites on the transboundary transport days yet not on stagnation days, suggesting addi-tional particle formation from gaseous urban emissions in cloud/fog droplets and/or in the high RH humidified aerosol environment. Many days had KORUS-AQ research aircraft flights that provided observations of aerosol absorption, particle chemistry and vertical profiles of extinction. AERONET retrievals and aircraft in situ mea-surements both showed high single scattering albedo (weak absorption) on the cloudy or cloud influenced days, plus aircraft profile in situ measurements showed large AOD enhancements (versus dried aerosol) at ambient relative humidity (RH) on the pollution transport days, consistent with the significantly larger fine mode particle radii and weak absorption.

Aerosol↗

Coupling mechanism of gain-guided integrated semiconductor laser arrays

It is shown that a gain-guided laser array couples via propagating fields rather than the evanescent mode coupling typically responsible for directional coupling in passive (directional couplers) and active (laser array) devices. It is shown that these phase-locked modes exhibit an interference pattern, in the junction plane, which arises from the curvature of the phase fronts of optical fields of the interacting lasers. The experimental results are interpreted with the aid of a simple theoretical model, and the effect of the observed mode pattern on the coupling of gain-guided lasers is discussed.

Kapon, E.↗

Detection of an X-ray flare in the RS CVn binary Sigma Corona Borealis

The first observation of a time-resolved X-ray flare in an RS CVn binary is reported. The X-ray flare was detected from the RS CVn binary Sigma CrB on August 17, 1980 during the course of a long pointed-mode observation with the Monitor Proportional Counter on the Einstein Observatory. The flare commenced at about 11:12 UT and lasted for about 205 minutes. During the flare the count rate increased by a factor of five from a quiescent state value of 0.3 count/s to a peak value of 1.5 count/s in the 1.2-10.2-keV energy band. The source spectrum during the flare was found to be considerably harder than that observed in the quiescent state. Details of the various characteristics of the X-ray flare are described.

Agrawal, P. C.↗

Development of an ideal observer that incorporates nuisance parameters and processes list-mode data

Observer models were developed to process data in list-mode format in order to perform binary discrimination tasks for use in an arms-control-treaty context. Data used in this study was generated using GEANT4 Monte Carlo simulations for photons using custom models of plutonium inspection objects and a radiation imaging system. We evaluated observer model performance and then presented using the area under the receiver operating characteristic curve. Lastly, we studied the ideal observer under both signal-known-exactly conditions and in the presence of unknowns such as object orientation and absolute count-rate variability; when these additional sources of randomness were present, their incorporation into the observer yielded superior performance.

61 RADIATION PROTECTION AND DOSIMETRY↗

Vibrational modes of hydrogen in (NH{sub 4})H{sub 5}(PO{sub 4}){sub 2} (Neutron scattering and simulation)

The vibrational modes of hydrogen in (NH{sub 4})H{sub 5}(PO{sub 4}){sub 2} have been investigated by inelastic incoherent neutron scattering at temperatures above (220 K) and below (160 and 5 K) the phase-transition point T{sub c} = 180 K. Computer simulation of vibrational modes has been performed for the low-temperature phase (NH{sub 4})H{sub 5}(PO{sub 4}){sub 2} at 5 K. The calculated generalized incoherent dynamic factor and the partial incoherent dynamic factors for all hydrogens make it possible to identify the observed modes from acid hydrogens and hydrogens of ammonium ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NEW SPATIALLY RESOLVED MID-INFRARED OBSERVATIONS OF THE TRANSITIONAL DISK TW Hya AND TENTATIVE EVIDENCE FOR A SELF-LUMINOUS COMPANION

We present spatially resolved observations of the canonical transition disk object TW Hya at 8.74 {mu}m, 11.66 {mu}m, and 18.30 {mu}m, obtained with the T-ReCS instrument on the Gemini telescope. These observations are a result of a novel observing mode at Gemini that enables speckle imaging. Using this technique, we image our target with short enough exposure times to achieve diffraction limited images. We use Fourier techniques to reduce our data, which allows high-precision calibration of the instrumental point-spread function. Our observations span two epochs and we present evidence for temporal variability at 11.66 {mu}m in the disk of TW Hya. We show that previous models of TW Hya's disk from the literature are incompatible with our observations and construct a model to explain the discrepancies. We detect marginal asymmetry in our data, most significantly at the shortest wavelengths. To explain our data, we require a model that includes an optically thin inner disk extending from 0.02 to 3.9 AU, an optically thick ring representing the outer disk wall at 3.9 AU and extending to 4.6 AU, and a hotter-than-disk-equilibrium source of emission located at {approx}3.5 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

POEMMA - Probe of Extreme Multi-Messenger Astrophysics: CRs and Neutrinos

Developed as a NASA Astrophysics Probe mission concept study, the Probe Of Extreme Multi-Messenger Astrophysics (POEMMA) science goals are to identify the sources of ultra-high energy cosmic rays (UHECRs) and to observe cosmic neutrinos above 10 PeV. POEMMA consists of two satellites flying in loose formation at 525 km altitudes. A novel focal plane design is optimized to observe the UV air fluorescence signal in a stereoscopic UHECR observation mode and the Cherenkov signals from air showers from UHECRs and neutrino-induced tauleptons in an Earth-limb viewing mode. POEMMA is designed to achieve full-sky coverage and significantly higher sensitivity to the highest energy cosmic messengers compared to what have been achieved so far by ground-based experiments. POEMMA will measure the spectrum, composition, and full sky distribution of the UHECRs above 10 EeV to identify the most energetic cosmic accelerators in the universe and study the acceleration mechanism(s). POEMMA will also have high sensitivity to cosmogenic neutrinos by observing the upward-moving air showers induced from tau neutrino interactions in the Earth. POEMMA will also be able to re-orient to a Target-of-Opportunity (ToO) neutrino mode to view transient astrophysical sources. In this talk, the science goals, instrument design, launch and mission profile, and simulated UHECR and neutrino measurement capabilities for POEMMA will be presented.

Krizmanic, John↗

Modal Analysis of the Orion Capsule Two Parachute System

As discussed in Ref [1], it is apparent from flight tests that the system made up of two main parachutes and a capsule can undergo several distinct dynamical behaviors. The most significant and problematic of these is the pendulum mode in which the system develops a pronounced swinging motion with an amplitude of up to 24 deg. Large excursions away from vertical by the capsule could cause it to strike the ground at a large horizontal or vertical speed and jeopardize the safety of the astronauts during a crewed mission. In reference [1], Ali et al. summarized a series of efforts taken by the Capsule Parachute Assembly System (CPAS) Program to understand and mitigate the pendulum issue. The period of oscillation and location of the system's pivot point are determined from post-flight analysis. Other noticeable but benign modes include: 1) flyout (scissors) mode, where the parachutes move back and forth symmetrically with respect to the vertical axis similar to the motion of a pair of scissors; 2) maypole mode, where the two parachutes circle around the vertical axis at a nearly constant radius and period; and 3) breathing mode, in which deformation of the non-rigid canopies affects the axial acceleration of the system in an oscillatory manner. Because these modes are relatively harm- less, little effort has been devoted to analyzing them in comparison with the pendulum motion. Motions of the actual system made up of two parachutes and a capsule are extremely complicated due to nonlinearities and flexibility effects. Often it is difficult to obtain insight into the fundamental dynamics of the system by examining results from a multi-body simulation based on nonlinear equations of motion (EOMs). As a part of this study, the dynamics of each mode observed during flight is derived from first principles on an individual basis by making numerous simplifications along the way. The intent is to gain a better understanding into the behavior of the complex multi-body system by studying the reduced set of differential equations associated with each mode. This approach is analogous to the traditional modal analysis technique used to study airplane flight dynamics, in which the full nonlinear behavior of the airframe is decomposed into the phugoid and short period modes for the longitudinal dynamics and the spiral, roll-subsidence, and dutch-roll modes for the lateral dynamics. It is important to note that the study does not address the mechanisms that cause the system to transition from one mode to another, nor does it discuss motions during which two or more modes occur simultaneously.

Pei, J.↗

Subsurface Stress Fields in Single Crystal (Anisotropic) Contacts

Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and fatigue stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent HCF failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and noncrystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. Techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts are presented in this report. Figure 1 shows typical damper contact locations in a turbine blade. The subsurface stress results are used for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades.

Arakere, Nagaraj K.↗

Subsurface Stress Fields In Single Crystal (Anisotropic) Contacts

Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent HCF failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and noncrystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is , presented, for evaluating the subsurface stresses in the elastic half-space, using a complex potential method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis. Effects of crystal orientation on stress response and fatigue life are examined.

Arakere, Nagaraj K.↗

Prior biosphere model impact on global terrestrial CO2 fluxes estimated from OCO-2 retrievals

This study assesses the impact of different state of the art global biospheric CO2 flux models, when applied as prior information, on inverse model “top-down” estimates of terrestrial CO2 fluxes obtained when assimilating Orbiting Carbon Observatory 2 (OCO-2) observations. This is done with a series of observing system simulation experiments (OSSEs) using synthetic CO2 column-average dry air mole fraction (XCO2) retrievals sampled at the OCO-2 satellite spatiotemporal frequency. The OSSEs utilized a 4-D variational (4D-Var) assimilation system with the GEOS-Chem global chemical transport model (CTM) to estimate CO2 net ecosystem exchange (NEE) fluxes using synthetic OCO-2 observations. The impact of biosphere models in inverse model estimates of NEE is quantified by conducting OSSEs using the NASA-CASA, CASA-GFED, SiB-4, and LPJ models as prior estimates and using NEE from the multi-model ensemble mean of the Multiscale Synthesis and Terrestrial Model Intercomparison Project as the “truth”. Results show that the assimilation of simulated XCO2 retrievals at OCO-2 observing modes over land results in posterior NEE estimates which generally reproduce “true” NEE globally and over terrestrial TransCom-3 regions that are well-sampled. However, we find larger spread among posterior NEE estimates, when using different prior NEE fluxes, in regions and seasons that have limited OCO-2 observational coverage and a large range in “bottom-up” NEE fluxes. Seasonally averaged posterior NEE estimates had standard deviations (SD) of ∼10 % to ∼50 % of the multi-model-mean NEE for different TransCom-3 land regions with significant NEE fluxes (regions/seasons with a NEE flux ≥0.5 PgC/yr). On a global average, the seasonally averaged residual impact of the prior model NEE assumption on the posterior NEE spread is ∼10 %–20 % of the posterior NEE mean. Additional OCO-2 OSSE simulations demonstrate that posterior NEE estimates are also sensitive to the assumed prior NEE flux uncertainty statistics, with spread in posterior NEE estimates similar to those when using variable prior model NEE fluxes. In fact, the sensitivity of posterior NEE estimates to prior error statistics was larger than prior flux values in some regions/times in the tropics and Southern Hemisphere where sufficient OCO-2 data were available and large differences between the prior and truth were evident. Overall, even with the availability of spatiotemporally dense OCO-2 data, noticeable residual differences (up to ∼20 %–30 % globally and 50 % regionally) in posterior NEE flux estimates remain that were caused by the choice of prior model flux values and the specification of prior flux uncertainties.

Sajeev Philip↗

In-Flight Line-Of-Sight Pointing Performance for the GOES-16 and GOES-17 Spacecraft

The Geostationary Operational Environmental Satellite-R program (GOES-R) has launched two of the next generation geostationary weather satellites, both of which are now fully operational. GOES-16 launched in November 2016, and GOES-17 launched in March 2017. In this paper, we present the pointing and pointing stability results of the two spacecraft, with specific focus on aspects of the design related to mitigating jitter. The flight instrument suite includes 6 seismic accelerometers sampled at approximately 2 kilohertz, allowing in-flight verification of pointing stability and comparison back to simulation predictions. This paper compares the observed flight results with the simulation predictions for acceleration and shock response spectrum (SRS) for various operational scenarios and instrument observation modes. Passive isolation of both the reaction wheels and the payload deck have proved to be effective in reducing jitter responses. Active Vibration Damping (AVD) of flexible-body modes attenuates the low frequency motion of the vehicle appendages, improving the low-frequency pointing performance. Knowledge of the instrument scan mirror motion is fed forward to the reaction wheel control, reducing disturbances on the spacecraft bus. Attitude knowledge and rate data are provided to the primary Earth-observing instrument with an accuracy defined by the Integrated Rate Error (IRE) requirements. The data are used to adjust instrument scanning. As we show in this paper, the in-flight performance of the GN&C (Guidance, Navigation and Control) design provides the necessary capabilities to achieve the demanding GOES-R mission objectives while its robustness enabled the simultaneous operation of the Advanced Baseline Imager (ABI) prime and redundant cryocoolers (CCs) to resolve an in-flight cooling anomaly on GOES-17.

Line-of-Sight↗

Subsurface Stress Fields in FCC Single Crystal Anisotropic Contacts

Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent high cycle fatigue (HCF) failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and non-crystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is presented for evaluating the subsurface stresses in the elastic half-space, based on the adaptation of a stress function method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis (FEA). Effects of crystal orientation on stress response and fatigue life are examined. Obtaining accurate subsurface stress results for anisotropic single crystal contact problems require extremely refined three-dimensional (3-D) finite element grids, especially in the edge of contact region. Obtaining resolved shear stresses (RSS) on the principal slip planes also involves considerable post-processing work. For these reasons it is very advantageous to develop analytical solution schemes for subsurface stresses, whenever possible.

Arakere, Nagaraj K.↗

Understanding the branching ratios of {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega}, {omega}{phi} observed at BES-III

In this work, we discuss the contribution of the mesonic loops to the decay rates of {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega}, which are suppressed by the helicity selection rules and {chi}{sub c1{yields}{phi}{omega}}, which is a double-Okubo-Zweig-Iizuka forbidden process. We find that the mesonic loop effects naturally explain the clear signals of {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega} decay modes observed by the BES Collaboration. Moreover, we investigate the effects of the {omega}-{phi} mixing, which may result in the order of magnitude of the branching ratio BR({chi}{sub c1{yields}{omega}{phi}}) being 10{sup -7}. Thus, we are waiting for the accurate measurements of the BR({chi}{sub c1{yields}{omega}{omega}}), BR({chi}{sub c1{yields}{phi}{phi}}), and BR({chi}{sub c1{yields}{omega}{phi}}), which may be very helpful for testing the long-distant contribution and the {omega}-{phi} mixing in {chi}{sub c1{yields}{phi}{phi}}, {omega}{omega}, {omega}{phi} decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the visibility of very thin specimens in annular bright field scanning transmission electron microscopy

Annular bright field (ABF) scanning transmission electron microscopy (STEM) is emerging as an important observation mode for its ability to simultaneously image both heavy and light elements. However, recent results have demonstrated that in the limit of a very thin specimen (a few atomic layers), the ABF and high angle annular dark field (HAADF) signals cease to be intuitively related: a phenomenon which is generally irrelevant when imaging 'normal' specimens. ABF/HAADF STEM observations and multislice image simulations of two catalyst samples of differing atomic weights are presented; it is shown that the nature of the ABF signal is specimen dependent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

H2RG Detector Characterization for RIMAS and Instrument Efficiencies

The Rapid infrared IMAger-Spectrometer (RIMAS) is a near-infrared (NIR) imager and spectrometer that will quickly follow up gamma-ray burst afterglows on the 4.3-meter Discovery Channel Telescope (DCT). RIMAS has two optical arms which allows simultaneous coverage over two bandpasses (YJ and HK) in either imaging or spectroscopy mode. RIMAS utilizes two Teledyne HgCdTe H2RG detectors controlled by Astronomical Research Cameras, Inc. (ARC/Leach) drivers. We report the laboratory characterization of RIMAS's detectors: conversion gain, read noise, linearity, saturation, dynamic range, and dark current. We also present RIMAS's instrument efficiency from atmospheric transmission models and optics data (both telescope and instrument) in all three observing modes.

Toy, Vicki L.↗