Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nulling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Quasi-periodic Radio Bursts Associated with Fast-mode Waves near a Magnetic Null Point

This paper presents an observation of quasi-periodic rapidly propagating waves observed in the Atmospheric Image Assembly (AIA) 171/193 Å channels during the impulsive phase of an M1.9 flare that occurred on 2012 May 7. The instant period was found to decrease from 240 to 120 s, and the speed of the wavefronts was in the range of ∼664–1416 km s{sup −1}. Almost simultaneously, quasi-periodic bursts with similar instant periods, ∼70 and ∼140 s, occur in the microwave emission and in decimetric type IV and type III radio bursts, and in the soft X-ray emission. The magnetic field configuration of the flare site was consistent with a breakout topology, i.e., a quadrupolar field along with a magnetic null point. The quasi-periodic rapidly propagating wavefronts of the EUV emission are interpreted as a fast magnetoacoustic wave train. The observations suggest that the fast-mode waves are generated during the quasi-periodic magnetic reconnection in the cusp region above the flare arcade loops. For the first time, we provide evidence of a tadpole wavelet signature at about 70–140 s in decimetric (245/610 MHz) radio bursts, along with the direct observation of a coronal fast-mode wave train in EUV. In addition, at AIA 131/193 Å we observed quasi-periodic EUV disturbances with periods of 95 and 240 s propagating downward at apparent speeds of 172–273 km s{sup −1}. The nature of these downward propagating disturbances is not revealed, but they could be connected to magnetoacoustic waves or periodically shrinking loops.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Generalized, Energy-conserving Numerical Simulations of Particles in General Relativity. I. Time-like and Null Geodesics

The numerical integration of particle trajectories in curved spacetimes is fundamental for obtaining realistic models of the particle dynamics around massive compact objects such as black holes and neutron stars. Generalized algorithms capable of handling generic metrics are needed for studies of both standard (Schwarzschild and Kerr metrics) and nonstandard (e.g., Schwarzschild metric plus nonclassical perturbations or multiple black hole metrics) spacetimes. The most commonly employed explicit numerical schemes (e.g., Runge–Kutta) are incapable of producing highly accurate results at critical points, e.g., in the regions close to the event horizon where gravity causes extreme curvature of the spacetime, at an acceptable computational cost. In this work we describe a generalized algorithm for the numerical integration of time-like (massive particles) and null (photons) geodesics in any given 3 + 1 split spacetime. We introduce a new, exactly energy-conserving implicit integration scheme based on the preservation of the underlying Hamiltonian, and we compare its properties with a standard fourth-order Runge–Kutta explicit scheme and an implicit midpoint scheme. We test the numerical performance of the three schemes against analytic solutions of particle and photon orbits in Schwarzschild and Kerr spacetimes. We additionally prove the versatility of our framework in handling more exotic metrics, such as Morris–Thorne wormholes and quantum-perturbed Schwarzschild black holes. The generalized method is also discussed in the perspective of future extensions to more complex particle dynamics, e.g., the addition of the Lorentz force acting on charged particles, which allows for test particle diagnostics in GRMHD simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

The null magnetic field as reference for the study of geomagnetic directional effects in animals and man.

Techniques for producing very low and zero magnetic fields are considered, giving attention to the compensation of the geomagnetic field by a Helmholtz coil system, approaches utilizing the shielding power of highly permeable alloys, and the complete exclusion of the geomagnetic field with the aid of a superconductive shield. Animal experiments in low magnetic fields are discussed, together with the exposure of man to 'null' magnetic fields and the Josephson junction as a possible biosensor of magnetic fields. It is found that neither the functions nor the behavior of man changes significantly during a two-week exposure to magnetic fields below 50 gammas.

Beischer, D. E.↗
NASA NTRS1973

Some magnetic null lines of astrophysical interest.

A line list is presented for magnetic null lines found in the Ultraviolet Multiplet Table and in selected spectral analyses for use in detailed studies of magnetic peculiar A star atmospheres.

Adelman, S. J.↗
NASA NTRS1983

Test of the principle of equivalence by a null gravitational red-shift experiment

A test of the Einstein equivalence principle (EEP) was performed by carrying out a 'null' gravitational red-shift experiment. The experiment compared the rates of a pair of hydrogen maser clocks with those of a set of three superconducting-cavity stabilized oscillator clocks as a function of the solar gravitational potential. If EEP were not valid, the relative rates could vary with potential. During the experiment, the solar potential in the laboratory varied approximately linearly at 3 parts in 10 to the 12th per day because of the earth's orbital motion, and diurnally with an amplitude of 3 parts in 10 to the 13th because of the earth's rotation. An upper limit on the relative frequency variation of 1.7 parts in 100 of the external potential was set. The accuracy was limited by the frequency stability of the clocks and by unmodeled environmental effects. The result is consistent with the EEP at the 2 percent level. The experiment can also be viewed as setting a limit on a possible spatial variation of the fine-structure constant.

Turneaure, J. P.↗
NASA NTRS1986

Two-Axis, Self-Nulling Skin-Friction Balance

Two-dimensional aerodynamic skin-friction force measured directly. Disk-shaped prototype design has overall dimensions of 1.25 (3.18 centimeters) diameter and 0.5 inch (1.27 centimeters) height. Unique mechanism consisting of two flexural pivoted arms connected in tandem but at right angle with each other designed to impart plane motion needed to sense two-axis flow over sensing element of balance. Sensing element, 0.370 inch (0.940 centimeter) in diameter, attached to end of second arm is servoed by two restoring-force motors orthogonally mounted in plane of airflow. Mechanism allows free plane motion of sensing element with no friction, and balance self-nulled to provide direct plane skin-friction force measurements continuously.

Tcheng, P.↗
NASA NTRS1988

Development of a two-dimensional skin friction balance nulling circuit using multivariable control theory

Measurement of planar skin friction forces in aerodynamic testing currently requires installation of two perpendicularly mounted, single-axis balances; consequently, force components must be sensed at two distinct locations. A two-axis instrument developed at the Langley Research Center to overcome this disadvantage allows measurement of a two-dimensional force at one location. This paper describes a feedback-controlled nulling circuit developed for the NASA two-axis balance which, without external compensation, is inherently unstable because of its low friction mechanical design. Linear multivariable control theory is applied to an experimentally validated mathematical model of the balance to synthesize a state-variable feedback control law. Pole placement techniques and computer simulation studies are employed to select eigenvalues which provide ideal transient response with decoupled sensing dynamics.

Tripp, John S.↗
NASA NTRS1992

Magnetic flipping - Reconnection in three dimensions without null points

In three dimensions, magnetic reconnection may take place in a sheared magnetic field at any singular field line, where the nearby field has X-type topology in planes perpendicular to the field line and where an electric field is present parallel to the field line. In the ideal region around the singular line there will, in general, be singularities in the plasma flow and electric field, both at the singular line and at 'magnetic flipping layers', which are remnants of local magnetic separatrices. In the absence of a three-dimensional magnetic neutral point or null point, reconnection of field lines can still occur by a process of magnetic flipping, in which the plasma crosses the flipping layers but the field lines rapidly flip along them by magnetic diffusion. Depending on the boundary conditions, there may be two or four flipping layers which converge on the singular line. A boundary layer analysis of a flipping layer is given, in which the magnetic field parallel to the layer decreases as one crosses it while the plasma pressure (or magnetic pressure associated with the field along the singular line) increases. The width of the flipping layer decreases with distance from the singular line.

Priest, E. R.↗
NASA NTRS1993

Nulling Hall-Effect Current-Measuring Circuit

Circuit measures electrical current via combination of Hall-effect-sensing and magnetic-field-nulling techniques. Known current generated by feedback circuit adjusted until it causes cancellation or near cancellation of magnetic field produced in toroidal ferrite core by current measured. Remaining magnetic field measured by Hall-effect sensor. Circuit puts out analog signal and digital signal proportional to current measured. Accuracy of measurement does not depend on linearity of sensing components.

Sullender, Craig C.↗
NASA NTRS1993

Optical design of zero-power Hubble Space Telescope wave-front correctors for null testing

The optical design of the second-generation wide-field/planetary-camera instrument for the Hubble Space Telescope has been modified to compensate for the spherical aberration of the optical telescope assembly (OTA) by introduction of undercorrected spherical aberration into the wave front. This instrument can be tested in a simple manner to ensure that its aberration contribution has the proper sign and magnitude. We present designs for a near-zero power doublet lens that can be used to generate a spherically aberrated wave front that is similar to the OTA wave front. When this lens is used in combination with the instrument, a near-perfect or nulled wave front should be produced, resulting in a high-quality point image on axis. We also present lens designs for a similar test that can be performed on the OTA simulators now being built to verify the other second-generation instruments.

Hannan, Paul G.↗
NASA NTRS1998

Sensitivity of nulling interferometers to extra-solar zodiacal emission (EZE)

It should be possible to discover and to analyze the atmospheres of Earth-like planets of nearby stars, provided their thermal emission is not overwhelmed by a bright zodiacal cloud in the same system. Nulling interferometers in space, such as the Terrestrial Planet Finder, can efficiently suppress a stellar point source, but there is no way to suppress diffuse emission underlying the planet under study. A cloud much brighter than solar level would cause serious reduction in sensitivity, by its photon shot noise. Since some clouds have been detected that are orders of magnitude brighter, zodiacal measurements of TPF candidates to solar level are critically needed. These could be obtained relatively soon with the largest aperture ground-based interferometers observing in the 10 micron atmospheric window. A cloud would be detectable as an infrared excess, provided the stellar emission (some 10(exp 4) times brighter) is adequately suppressed by destructive interference. Ideally, the ground interferometer should have angular response similar to that of TPF, so as to measure directly the troublesome zodiacal component. The individual elements must be large, for even with approx. 8 m apertures, star cancellation and low thermal background, integration times of at least several hours will be needed to sense the clouds against shot noise from telescope thermal emission. In this paper we compare the sensitivity of TPF and ground based interferometers to a twin of the solar system at 10 pc, using Good's (1994) model of the zodiacal cloud.

Angel, Roger↗
NASA NTRS1999

Evaluation of the Self-Nulling Rotating Eddy Current Probe System

In order to detect multi-site fatigue cracks located under flush-head rivets, automated eddy current equipment is required. To assure a reliable system, the eddy current probe must be centered easily over the installed rivets. To meet these requirements, the NDE Group at NASA LaRC developed the Self-Nulling Rotating Eddy Current Probe System (SNRECPS) which will be referred to as RPS in this document. The system was evaluated at the FAA, NDI Validation Center, in Albuquerque, New Mexico. The system was capable of detecting a 0.032 inch long crack with a 90/95% PoD. Further evaluations were conducted at Boeing in Long Beach, California. These evaluations included fatigue cracks and notches in a range from 0.025 to 0.100 inch long under flush-head aluminum rivets, and titanium or steel flush-head fasteners. The results of these tests are reported herein. Subsequently, the system was loaned to the USAF Structures Laboratory for the purpose of detecting and measuring short cracks under flush-head rivets in a variety of fatigue test specimens. The inspection task was to detect and plot crack growth from numbered fasteners in lettered rows. In January, 1998, the system was taken to Northwest Airlines Maintenance Base, in Atlanta, to inspect a DC-9, for multi-site cracks in three circumferential splices. The aircraft had 83,000 cycles. The inspection was conducted at 30 kHz from longeron 5 left to longeron 5 right. The system was calibrated using a 0,030 EDM first layer notch. The instrument gain was set to 19 mV from the notch. The reject level was set at 10 mV and the unflawed fasteners yielded a signal amplitude of 2 to 3 mV. Only one fastener location, out of about 2,500 tested, yielded a signal of 58 mV. The rivet was removed and visually evaluated. It appeared to be a slight gouge in the counter-sink zone. No fatigue cracks were detected. The same fastener locations were also inspected using the Boeing MAUS system at 60 kHz. No cracks were detected. Thus far, the rotating probe eddy current system has been found to be very user friendly and capable of detecting first layer cracks on the order of 0.030 inch long or longer.

Hagemaier, Don↗
NASA NTRS1996

Gravitational Redshift in a Local Freely Falling Frame: A Proposed New Null Test of the Equivalence Principle

We consider the gravitational redshift effect measured by an observer in a local freely failing frame (LFFF) in the gravitational field of a massive body. For purely metric theories of gravity, the metric in a LFFF is expected to differ from that of flat spacetime by only "tidal" terms of order (GM/c(exp 2)R)(r'/R )(exp 2), where R is the distance of the observer from the massive body, and r' is the coordinate separation relative to the origin of the LFFF. A simple derivation shows that a violation of the equivalence principle for certain types of "clocks" could lead to a larger apparent redshift effect of order (1 - alpha)(G M/c(exp 2)R)(r'/R), where alpha parametrizes the violation (alpha = 1 for purely metric theories, such as general relativity). Therefore, redshift experiments in a LFFF with separated clocks can provide a new null test of the equivalence principle. With presently available technology, it is possible to reach an accuracy of 0.01% in the gravitational field of the Sun using an atomic clock orbiting the Earth. A 1% test in the gravitational field of the galaxy would be possible if an atomic frequency standard were flown on a space mission to the outer solar system.

Krisher, Timothy P.↗
NASA NTRS2002

Nulling Infrared Radiometer for Measuring Temperature

A nulling, self-calibrating infrared radiometer is being developed for use in noncontact measurement of temperature in any of a variety of industrial and scientific applications. This instrument is expected to be especially well-suited to measurement of ambient or near-ambient temperature and, even more specifically, for measuring the surface temperature of a natural body of water. Although this radiometer would utilize the long-wavelength infrared (LWIR) portion of the spectrum (wavelengths of 8 to 12 ?m), its basic principle of operation could also be applied to other spectral bands (corresponding to other temperature ranges) in which the atmosphere is transparent and in which design requirements for sensitivity and temperature-measurement accuracy could be satisfied.

Ryan, Robert↗