SEARCH · Engineering Papers

Results for “nonlinear response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Room Temperature Quasi-static Characterization and Constitutive Model Parametrization of Flexible Polyurethane Foams of Different Densities Loaded in Different Orientations

This report describes the efforts to characterize and model General Plastics TF6070 and EF4000 flexible polyurethane foams under room temperature, large deformation quasi-static cyclic mechanical loading conditions. Densities from three to fifteen pound per cubic foot (PCF) are examined, which correspond to relative densities of approximately 4 to 20%. These foams are open cell structured and flexible at room temperature with a glass transition transition less than -30°C, and they fully recover their original shape when unloaded (at room temperature). Uniaxial compression tests were conducted with accompanying lateral image series for Digital Image Correlation (DIC) analysis with the goal of extracting transverse strain responses. Due to difficulties with DIC analysis at large strains, lateral strains were instead extracted for each test via edge tracking. The experimental results exhibit a nonlinear elastic response and anisotropic material behavior (particularly for the lower densities). Some hysteresis is observed that is different between the first and subsequent cycles of deformation indicating both a small degree of permanent damage (reduced stiffness during reloading) and viscoelasticity. These inelastic mechanisms are not considered in the modeling and calibration in this report. This work considers only the rate independent, room temperature foam behavior. Individual foam densities were calibrated for loading in two directions, parallel and perpendicular to the foam bubble rise direction, since the mechanical behavior is different in these two directions. The Flex Foam constitutive model was used for all parameterizations despite the fact that the model is isotropic. A review of the constitutive model is given as well as necessary data reduction procedures to parameterize it for each foam density and orientation are discussed. Finally, two different parameterizations are developed that take the undeformed foam density as an input that span all densities considered. These two parameterized models represent foams loaded in the rise and transverse directions respectively. We summarize the assumptions and limitations of the parameterizations provided in this report to guide analysis choices with them. All parameterizations presented herein have the following traits, room temperature, rate independent, damage-free, and non-dissipative . Isotropy (even if they are representing anisotropic data). Supplied Sierra Solid Mechanics Flex Foam Model Inputs are in units: pounds, inches, Celsius, and seconds

36 MATERIALS SCIENCE↗

DOE OSTI2021

A quantitative assessment of the model form error of friction models across different interface representations for jointed structures

Hysteretic models are widely used to model frictional interactions in joints to recreate experimental behavior. However, it is unclear which models are best suited for fitting or predicting the responses of structures. Here, the present study evaluates 26 friction model/interface representation combinations to quantify the model form error. A Quasi-Static Modal Analysis approach (termed Rayleigh Quotient Nonlinear Modal Analysis) is adopted to calculate the nonlinear system response, and a Multi-Objective Optimization is solved to fit experimental data of the first mode of the Brake-Reuß Beam. Optimized parameters from the first mode are applied to the second and third bending modes to quantify the predictive ability of the models. Formulations for both tracing full hysteresis loops and recreating hysteresis loops from a single loading curve (Masing assumptions) are considered. Smoothly varying models applied to a five patch representation showed the highest flexibility (for fitting mode 1) and good predictive potential (for modes 2 and 3). For a second formulation, which uses 152 frictional elements to represent the interface, the physically motivated spring in series with a Coulomb slip model (elastic dry friction) has high error for fitting mode 1 and performs near the middle for predicting higher modes. For both interface representation, the best fit models are not the most physical, but rather the ones with the most parameters (as expected); however, the more physical models perform somewhat better for predicting the higher modes.

42 ENGINEERING↗

DOE OSTI2023

Electronic density response of warm dense matter

Matter at extreme temperatures and pressures—commonly known as warm dense matter (WDM)—is ubiquitous throughout our Universe and occurs in astrophysical objects such as giant planet interiors and brown dwarfs. Moreover, WDM is very important for technological applications such as inertial confinement fusion and is realized in the laboratory using different techniques. A particularly important property for the understanding of WDM is given by its electronic density response to an external perturbation. Such response properties are probed in x-ray Thomson scattering (XRTS) experiments and are central for the theoretical description of WDM. In this work, we give an overview of a number of recent developments in this field. To this end, we summarize the relevant theoretical background, covering the regime of linear response theory and nonlinear effects, the fully dynamic response and its static, time-independent limit, and the connection between density response properties and imaginary-time correlation functions (ITCF). In addition, we introduce the most important numerical simulation techniques, including path-integral Monte Carlo simulations and different thermal density functional theory (DFT) approaches. From a practical perspective, we present a variety of simulation results for different density response properties, covering the archetypal model of the uniform electron gas and realistic WDM systems such as hydrogen. Moreover, we show how the concept of ITCFs can be used to infer the temperature from XRTS measurements of arbitrary complex systems without the need for any models or approximations. Finally, we outline a strategy for future developments based on the close interplay between simulations and experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Generalized analytical and numerical modeling of optical second harmonic generation in anisotropic crystals and complex heterostructures using #SHAARP package

Optical second harmonic generation (SHG) is a nonlinear optical effect widely used for nonlinear optical microscopy and laser frequency conversion. The closed-form analytical solution of the nonlinear optical responses is essential for evaluating the optical responses of new materials whose optical properties are unknown a priori. Many approximations have therefore been employed in the existing analytical approaches, such as slowly varying approximation, weak reflection of the nonlinear polarization, transparent medium, high crystallographic symmetry, Kleinman symmetry, easy crystal orientation along a high-symmetry direction, phase matching conditions and negligible interference among nonlinear waves, which may lead to large errors in the reported material properties. To avoid these approximations, here we have developed an open-source package named Second Harmonic Analysis of Anisotropic Rotational Polarimetry (#SHAARP) for single interface (si) and in multilayers (ml) for homogeneous crystals. The reliability and accuracy are established by experimentally benchmarking with both the SHG polarimetry and Maker fringes predicted from the package using standard materials. SHAARP.si and SHAARP.ml are available through GitHub https://github.com/Rui-Zu/SHAARP and https://github.com/bzw133/SHAARP.ml, respectively.

complex systems↗

DOE OSTI2020

Analytical model of plasma response to external magnetic perturbation in absence of no-slip condition

Recent simulation and experimental results suggest that the magnetic island and flow on a resonant surface often do not satisfy the “no-slip” condition in the steady state. A new theoretical model on a nonlinear plasma response to external magnetic perturbation in the absence of a no-slip condition is proposed. The model is composed of the equations for the evolution of both the width and phase of the magnetic island due to forced reconnection driven by the external magnetic perturbation, and the force-balance equation for the plasma flow. When the island width is much less than the resistive layer width, the island growth is governed by the linear Hahm–Kulsrud–Taylor solution in the presence of time-dependent plasma flow. In the other regime when the island width is much larger than the resistive layer width, the evolution of both the island width and phase can be described using the Rutherford theory. The island solution is used to construct the quasilinear electromagnetic force, which, together with the viscous one, contributes to the nonlinear variation in plasma flow. The no-slip condition assumed in the conventional error field theory is not imposed here, where the island oscillation frequency depends on but does not necessarily equal to the plasma flow frequency at the rational surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Purcell enhancement of directional edge photocurrent in a van der Waals self-cavity

Cavities provide a means to manipulate the optical and electronic responses of quantum materials by selectively enhancing light-matter interaction at specific frequencies and momenta. While cavities typically involve external structures, exfoliated flakes of van der Waals (vdW) materials can form intrinsic self-cavities due to their small finite dimensions, confining electromagnetic fields into plasmonic cavity modes, characterized by standing-wave current distributions. While cavity-enhanced phenomena are well-studied at optical frequencies, the impact of self-cavities on nonlinear electronic responses—such as directional photocurrent—remains largely unexplored, particularly in the terahertz regime, critical for emerging ultrafast optoelectronic technologies. Here, we report a self-cavity-induced Purcell enhancement of directional photocurrents in the vdW semimetal WTe 2 . Using ultrafast optoelectronic circuitry, we measured coherent near-field THz emission resulting from nonlinear photocurrents excited at the sample edges. We observed enhanced emission at finite frequencies, tunable via excitation fluence and sample geometry, which we attribute to plasmonic interference effects controlled by the cavity boundaries. We developed an analytical theory that captures the cavity resonance conditions and spectral response across multiple devices. Our findings establish WTe 2 as a bias-free, geometry-tunable THz emitter and demonstrate the potential of self-cavity engineering for controlling nonlinear, nonequilibrium dynamics in quantum materials.

condensed-matter physics↗

DOE OSTI2026

Protonic nickelate device networks for spatiotemporal neuromorphic computing

Computation in biological neural circuits arises from the interplay of nonlinear temporal responses and spatially distributed dynamic network interactions. Replicating this richness in hardware has remained challenging, as most neuromorphic devices emulate only isolated neuron- or synapse-like functions. Here we introduce an integrated neuromorphic computing platform in which both nonlinear spatiotemporal processing and programmable memory are realized within a single perovskite nickelate material system. By engineering symmetric and asymmetric hydrogenated NdNiO 3 junction devices on the same wafer, we combine ultrafast, proton-mediated transient dynamics with stable multilevel resistance states. Networks of symmetric NdNiO 3 junctions exhibit emergent spatial interactions mediated by proton redistribution, while each node simultaneously provides short-term temporal memory, enabling nanosecond-scale operation with an energy cost of ~0.2 nJ per input. When interfaced with asymmetric output units serving as reconfigurable long-term weights, these networks allow both feature transformation and linear classification in the same material system. Leveraging these emergent interactions, the platform enables real-time pattern recognition and achieves high accuracy in spoken digit classification and early seizure detection, outperforming temporal-only or uncoupled architectures. These results position protonic nickelates as a compact, energy-efficient, CMOS-compatible platform that integrates processing and memory for scalable intelligent hardware.

Electrical and electronic engineering↗

DOE OSTI2023

Synthesis, crystal and electronic structures, linear and nonlinear optical properties, and photocurrent response of oxyhalides CeHaVIO 4 (Ha = Cl, Br; VI = Mo, W)

Four heteroanionic oxyhalides, CeClMoO 4 , CeBrMoO 4 , CeClWO 4 , and CeBrWO 4 , have been studied as multifunctional materials, which show a combination of good second harmonic generation (SHG) response and photocurrent signals. Millimeter-sized CeHaVIO 4 (Ha = Cl, Br; VI = Mo, W) crystals were grown by halide salt flux. The crystal structure of CeHaVIO 4 crystals was accurately determined by single-crystal X-ray diffraction. CeClMoO 4 , CeBrMoO 4 , and CeBrWO 4 are isostructural to each other, and crystallize in the acentric LaBrMoO 4 structure type. CeClWO 4 crystallizes in a new structure type with unit cell parameters of a = 19.6059(2) Å, b = 5.89450(10) Å, c = 7.80090(10) Å, and β = 101.4746(8)°. The bandgaps of CeHaVIO 4 fall into the range of 2.8(1)–3.1(1) eV, which are much smaller than those of isotypic LaHaVIO 4 (Ha = Cl, Br; VI = Mo, W) in the range of 3.9(1)–4.3(1) eV. The narrowing of bandgaps in CeHaVIO 4 originates from the presence of partially filled 4f orbitals of cerium atoms, which was confirmed by density functional theory (DFT) calculations. The moderate bandgaps make CeHaVIO 4 suitable for infrared nonlinear optical (IR NLO) applications. CeBrMoO 4 and CeBrWO 4 exhibit moderate SHG responses of 0.58× AGS and 0.46× AGS, respectively, and are both type-I phase-matching materials. Moderate SHG response, easy growth of crystals, high ambient stability, and type-I phase-matching behavior make CeBrMoO 4 and CeBrWO 4 great materials for IR NLO applications. CeHaVIO 4 films also exhibited good photocurrent response upon light radiation. Furthermore, this work demonstrates the rich structural chemistry of the REHaVIO 4 (RE = Y, La–Lu; Ha = Cl, Br; VI = Mo, W) family and the potential presence of more multifunctional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Ferromagnetic particles as ultra-sensitive non-linear response labels for magnetic particles imaging (MPI) and sensing applications

A significant enhancement of detection capabilities of the room temperature MPQ is seen using optical lithography-defined, ferromagnetic iron-nickel alloy microdisks. Irreversible transitions between strongly non-collinear (vortex) and a collinear single domain states, driven by an ac magnetic field, translate into a nonlinear magnetic response that enables ultrasensitive detection of material at relatively small magnetic fields.

Novosad, Valentine↗

DOE OSTI2023

Ferromagnetic particles as ultra-sensitive non-linear response labels for magnetic particles imaging (MPI) and sensing applications

Novosad, Valentine↗

DOE OSTI2025

Finite Element Analysis of the TRUST Nonlinear Dynamics Testbed

This paper builds on prior work conducted within the Los Alamos National Laboratory (LANL) Testbeds to Reduce Uncertainty in Simulations and Tests (TRUST) program. Specifically, it builds on finite element (FE) modeling efforts for the TRUST program’s Nonlinear Dynamics (ND) testbed. Historically, the FE model for the ND testbed has exclusively utilized a Lanczos eigensolver that linearly extracts the system’s natural frequencies. This paper investigates the Abaqus 2024’s explicit dynamic solver, which implements a central difference explicit solver. The central difference method used in Abaqus can capture nonlinear material responses in structural dynamic simulations making it suitable for the ND FE model.

42 ENGINEERING↗

DOE OSTI2021

Bulk Photovoltaic Effect Driven by Collective Excitations in a Correlated Insulator

We investigate the bulk photovoltaic effect, which rectifies light into electric current, in a collective quantum state with correlation driven electronic ferroelectricity. We show via explicit real-time dynamical calculations that the effect of the applied electric field on the electronic order parameter leads to a strong enhancement of the bulk photovoltaic effect relative to the values obtained in a conventional insulator. The enhancements include both resonant enhancements at sub-band-gap frequencies, arising from excitation of optically active collective modes, and broadband enhancements arising from nonresonant deformations of the electronic order. The deformable electronic order parameter produces an injection current contribution to the bulk photovoltaic effect that is entirely absent in a rigid-band approximation to a time-reversal symmetric material. Furthermore, our findings establish that correlation effects can lead to the bulk photovoltaic effect and demonstrate that the collective behavior of ordered states can yield large nonlinear optical responses.

14 SOLAR ENERGY↗

DOE OSTI2022

Simulating the non-monotonic strain response of nanoporous multiferroic composites under electric field control

In this work, we simulate and analyze the mechanical response of a class of multiferroic materials consisting of a templated porous nanostructure made out of cobalt ferrite (CFO) partially filled by atomic layer deposition (ALD) with a ferroelectric phase of lead zirconate titanate (PZT). The strain in the device is measured when an electric field is applied for varying ALD thicknesses, displaying a non-monotonic dependence with a maximum strain achieved for a coating thickness of 3 nm. To understand this behavior, we apply finite element modeling to the smallest repeatable unit of the nanoporous template and simulate the mechanical response as a function of PZT coating thickness. We find that this non-monotonic response is caused by the interplay between two driving forces opposing one another. First, increased porosity works toward increasing the strain due to a reduced system stiffness. Second, decreased porosity involves a larger mass fraction of PZT, which drives the electro-mechanical response of the structure, thus leading to a larger strain. The balance between these two driving forces is controlled by the shear coupling at the CFO/PZT interface and the effective PZT cross section along the direction of the applied electric field. Here, our numerical results show that considering a nonlinear piezoelectric response for PZT leads to an improved agreement with the experimental data, consistent with ex situ poling of the nanostructure prior to magnetic measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

Effect of Soil Properties and Input Motion on Site Amplification Using Validated Nonlinear Soil Model

Here, three-dimensional (3-D) nonlinear site response analyses are conducted using finite element models of actual soil profiles from ten nuclear power plant (NPP) sites in the United States to investigate the effects of soil properties and input motions on site amplification. The modeling approach developed in this study combines several novel elements, such as 3-D analysis (including vertical motions), nonlinear inelastic behavior of soil (strain-dependent shear modulus reduction and hysteretic damping), formulation of nonreflecting boundary conditions at the base, and generation of realistic outcrop ground motions for specific sites. All these elements of the modeling approach are first validated using actual data from five earthquakes at three downhole array stations recorded in the Kiban-Kyoshin network (KiK-net), Japan. The same approach is then used to develop site models of ten NPP sites in the United States and corresponding ground motions that are spectrally matched to the site hazard spectra. Eight sets of three-component input motions are used in the study and are categorized on the basis of presence or absence of a near-field pulse in the seed ground motions used for spectral matching. It is found that all sites retain a definite site amplification function regardless of the input motion, provided that the seed motion is spectrally matched to the site hazard spectra. The magnitude of site amplification and frequencies at which they occur depend upon soil properties, particularly the shear wave velocity profile and the constitutive relationship (strain-dependent shear modulus reduction and hysteretic damping) of soil. Amplification of spectral acceleration in the vertical direction (up-down motion) is found to be just as much as, if not more than, the amplification in the horizontal direction. Peak shear strain is found to be about 20% larger for near-field motions compared to far-field motions whereas maximum horizontal site amplification for far-field motions is found to be consistently larger than that of near-field motions, even though the differences between the two remain within the scatter resulting from individual ground motions.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2021

Nonlinear dynamics of topological Dirac fermions in 2D spin-orbit coupled materials

Abstract The graphene family materials are two-dimensional staggered monolayers with a gapped energy band structure due to intrinsic spin-orbit coupling. The mass gaps in these materials can be manipulated on-demand via biasing with a static electric field, an off-resonance circularly polarized laser, or an exchange interaction field, allowing the monolayer to be driven through a multitude of topological phase transitions. We investigate the dynamics of spin-orbit coupled graphene family materials to unveil topological phase transition fingerprints embedded in the nonlinear regime and show how these signatures manifest in the nonlinear Kerr effect and in third-harmonic generation processes. We show that the resonant nonlinear spectral response of topological fermions can be traced to specific Dirac cones in these materials, enabling characterization of topological invariants in any phase by detecting the cross-polarized component of the electromagnetic field. By shedding light on the unique processes involved in harmonic generation via topological phenomena our findings open an encouraging path towards the development of novel nonlinear systems based on two-dimensional semiconductors of the graphene family.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Time-varying gradient metasurface with applications in all-optical beam steering

Integrating the large, subpicosecond nonlinear optical response of epsilon-near-zero (ENZ) materials with the broad design freedoms of plasmonic metasurfaces shows potential for creating rapidly modulated optical devices with possible applications in telecommunications, sensing, and reactive beam steering. In this work, we experimentally investigate a metasurface consisting of a plasmonic gradient array on a thin layer of indium tin oxide (ITO), characterize how incident probe pulses diffract from a system as it is being dynamically modulated by a pump pulse at wavelengths near the ENZ region. Angular shifts in the diffraction orders are observed and can be principally attributed to the adiabatic wavelength conversion of the probe as it witnesses the temporal change of index induced by the pump. Of note, the asymmetric gradient metasurface, considered to be a blazed diffraction grating, shows significantly different dynamic responses for different diffraction orders. The free-space wavelength shift to +1 and -1 diffraction orders is 6 and 12 nm, resulting in steering angle changes of 0.65 and 1.5°, respectively.

42 ENGINEERING↗

DOE OSTI2020

Nonlinear time-domain spectroscopy near a band inversion

We develop a theory for the nonlinear time-domain response of a semimetal driven by an ultrafast optical pulse. At quadratic order in the driving field we find that the response near a band inversion transition contains a coherent oscillating component proportional to field intensity with a frequency that can be tuned over a wide range (from terahertz to the near IR) selected by the chemical potential. Finally, we illustrate the effect by calculating the induced current as a function of time for a two-band system with time-reversal symmetry but broken parity symmetry to study semimetals where large Berry curvature near a band inversion transition promotes this nonlinear response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Absence of quantization in the circular photogalvanic effect in disordered chiral Weyl semimetals

The circularly polarized photogalvanic effect (CPGE) is studied in chiral Weyl semimetals with short-range quenched disorder. Without disorder, the topological properties of chiral Weyl semimetals lead to quantization of the CPGE, which is a second-order optical response. Furthermore, using a combination of diagrammatic perturbation theory in the continuum and exact numerical calculations via the kernel polynomial method on a lattice model, we show that disorder perturbatively destabilizes the quantization of the CPGE.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗