Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nonlinear oscillation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Nonlinear interactions in mixing layers and compressible heated round jets

The nonlinear interactions between a fundamental instability mode and both its harmonics and the changing mean flow are studied using the weakly nonlinear stability theory of Stuart and Watson, and numerical solutions of coupled nonlinear partial differential equations. The first part focuses on incompressible cold (or isothermal; constant temperature throughout) mixing layers, and for these, the first and second Landau constants are calculated as functions of wavenumber and Reynolds number. It is found that the dominant contribution to the Landau constants arises from the mean flow changes and not from the higher harmonics. In order to establish the range of validity of the weakly nonlinear theory, the weakly nonlinear and numerical solutions are compared and the limitation of each is discussed. At small amplitudes and at low-to-moderate Reynolds numbers, the two results compare well in describing the saturation of the fundamental, the distortion of the mean flow, and the initial stages of vorticity roll-up. At larger amplitudes, the interaction between the fundamental, second harmonic, and the mean flow is strongly nonlinear and the numerical solution predicts flow oscillations, whereas the weakly nonlinear theory yields saturation. In the second part, the weakly nonlinear theory is extended to heated (or nonisothermal; mean temperature distribution) subsonic round jets where quadratic and cubic nonlinear interactions are present, and the Landau constants also depend on jet temperature ratio, Mach number and azimuthal mode number. Under exponential growth and nonlinear saturation, it is found that heating and compressibility suppress the growth of instability waves, that the first azimuthal mode is the dominant instability mode, and that the weakly nonlinear solution describes the early stages of the roll-up of an axisymmetric shear layer. The receptivity of a typical jet flow to pulse type input disturbance is also studied by solving the initial value problem and then examining the behavior of the long-time solution.

Jarrah, Yousef Mohd↗
DOE OSTI2022

Autoresonant excitation of nonlinear beam motion in storage rings

Understanding and controlling of nonlinear beam dynamics are essential to the performance of storage ring light sources. In order to measure and correct limitations due to nonlinear beam dynamics, an effective method is needed to excite the beam oscillation to large amplitudes. Autoresonance is a method that enables the control of the amplitude of a driven nonlinear oscillator by sweeping the frequency of the driver. In this study, autoresonant excitation of beam transverse oscillations in storage rings is studied. The threshold of the drive amplitude for autoresonance is theoretically obtained, for cases with or without damping. The results are in good agreement with simulations for a simple storage ring model, as well as for models of actual storage rings. Application of the theory to experimental data on the SPEAR3 storage ring also validates the results

43 PARTICLE ACCELERATORS↗
NASA NTRS1982

Large-amplitude free and driven drop-shape oscillations - Experimental observations

A quantitative study of some nonlinear aspects of drop-shape oscillations in a liquid-liquid system has been completed. The results suggest a soft nonlinearity in the fundamental resonant mode frequency as the oscillation amplitude is increased. Indications of an increase in the rate of decay have also been obtained. A study of the internal flow fields has revealed patterns of circulation not present at low amplitude.

Trinh, E.↗
DOE OSTI2021

Insights on the continuous representations of piecewise-smooth nonlinear systems: limits of applicability and effectiveness

Dynamical systems subject to intermittent contact are often modeled with piecewise-smooth contact forces. However, the discontinuous nature of the contact can cause inaccuracies in numerical results or failure in numerical solvers. Representing the piecewise contact force with a continuous and smooth function can mitigate these problems, but not all continuous representations may be appropriate for this use. Here, five representations used by previous researchers (polynomial, rational polynomial, hyperbolic tangent, arctangent, and logarithm-arctangent functions) are studied to determine which ones most accurately capture nonlinear behaviors including super- and subharmonic resonances, multiple solutions, and chaos. The test case is a single-DOF forced Duffing oscillator with freeplay nonlinearity, solved using direct time integration. This work intends to expand on past studies by determining the limits of applicability for each representation and what numerical problems may occur.

42 ENGINEERING↗
DOE OSTI2020

Experimental parameters, combined dynamics, and nonlinearity of a magnonic-opto-electronic oscillator (MOEO)

We report the construction and characterization of a comprehensive magnonic-opto-electronic oscillator (MOEO) system based on 1550-nm photonics and yttrium iron garnet (YIG) magnonics. The system exhibits a rich and synergistic parameter space because of the ability to control individual photonic, electronic, and magnonic components. Taking advantage of the spin wave dispersion of YIG, the frequency self-generation as well as the related nonlinear processes becomes sensitive to the external magnetic field. Besides being known as a band-pass filter and a delay element, the YIG delay line possesses spin wave modes that can be controlled to mix with the optoelectronic modes to generate higher-order harmonic beating modes. With the high sensitivity and external tunability, the MOEO system may find usefulness in sensing applications in magnetism and spintronics beyond optoelectronics and photonics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Characterization and interaction of geometric and contact/impact nonlinearities in dynamical systems

Here, we study how a contact/impact nonlinearity interacts with a geometric cubic nonlinearity in an oscillator system. Specific focus is shown to the effects on bifurcation behavior and secondary resonances (i.e., super- and sub-harmonic resonances). The effects of the individual nonlinearities are first explored for comparison, and then the influences of the combined nonlinearities, varying one parameter at a time, are analyzed and discussed. Nonlinear characterization is then performed on an arbitrary system configuration to study super- and sub-harmonic resonances and grazing contacts or bifurcations. Both the cubic and contact nonlinearities cause a drop in amplitude and shift up in frequency for the primary resonance, and they activate high-amplitude subharmonic resonance regions. The nonlinearities seem to never destructively interfere. The contact nonlinearity generally affects the system’s superharmonic resonance behavior more, particularly with regard to the occurrence of grazing contacts and the activation of many bifurcations in the system’s response. The subharmonic resonance behavior is more strongly affected by the cubic nonlinearity and is prone to multistable behavior. Perturbation theory proved useful for determining when the cubic nonlinearity would be dominant compared to the contact nonlinearity. The limiting behaviors of the contact stiffness and freeplay gap size indicate the cubic nonlinearity is dominant overall. It is demonstrated that the presence of contact may result in the activation of several bifurcations. In addition, it is proved that the system’s subharmonic resonance region is prone to multistable dynamical responses having distinct magnitudes.

42 ENGINEERING↗
NASA NTRS2018

GONG Catalog of Solar Filament Oscillations Near Solar Maximum

We have cataloged 196 filament oscillations from the Global Oscillation Network Group Hα network data during several months near the maximum of solar cycle 24 (2014 January–June). Selected examples from the catalog are described in detail, along with our statistical analyses of all events. Oscillations were classified according to their velocity amplitude: 106 small-amplitude oscillations (SAOs), with velocities <10 km s-1, and 90 large-amplitude oscillations (LAOs), with velocities >10 km s-1. Both SAOs and LAOs are common, with one event of each class every two days on the visible side of the Sun. For nearly half of the events, we identified their apparent trigger. The period distribution has a mean value of 58 ± 15 minutes for both types of oscillations. The distribution of the damping time per period peaks at τ/P = 1.75 and 1.25 for SAOs and LAOs, respectively. We confirmed that LAO damping rates depend nonlinearly on the oscillation velocity. The angle between the direction of motion and the filament spine has a distribution centered at 27° for all filament types. This angle agrees with the observed direction of filament-channel magnetic fields, indicating that most of the cataloged events are longitudinal (i.e., undergo field-aligned motions). We applied seismology to determine the average radius of curvature in the magnetic dips, R ≈ 89 Mm, and the average minimum magnetic field strength, B ≈ 16 G. The catalog is available to the community online and is intended to be expanded to cover at least 1 solar cycle.

Filaments↗
NASA NTRS1972

Part 1: Classical laser. Part 2: The effect of velocity changing collisions on the output of a gas laser

A classical model for laser action is discussed, in which an active medium consisting of anharmonic oscillators interacts with an electromagnetic field in a resonant cavity. Comparison with the case of a medium consisting of harmonic oscillators shows the significance of nonlinearities for producing self-sustained oscillations in the radiation field. A theoretical model is presented for the pressure dependence of the intensity of a gas laser, in which only velocity-changing collisions with foreign gas atoms are included. A collision model for hard sphere, repulsive interactions was derived. Collision theory was applied to a third-order expansion of the polarization in powers of the cavity electric field (weak signal theory).

Borenstein, M.↗
NASA NTRS1972

Classical laser.

In this paper a completely classical model for laser action is discussed. An active medium consisting of classical anharmonic oscillators interacts with a classical electromagnetic field in a resonant cavity. Comparison with the case of a medium consisting of harmonic oscillators shows the significance of nonlinearities for producing self-sustained oscillations in the radiation field. The results for the classical model are found to be similar to those for a semiclassical model of the ammonia-beam maser. The conclusion is that laser action is not intrinsically a quantum-mechanical effect. The classical-laser theory as given in this paper can also be applied to the case of the electron-cyclotron maser.

Borenstein, M.↗
NASA NTRS1993

Refinements on the pinhole camera measurements of the LDEF attitude

The results from the University of Alabama in Huntsville (UAH) pinhole camera were reanalyzed to include the effects of corotation of the atmosphere with the Earth as well as satellite oscillation. Previous results from the instrument showed that the satellite had stable attitude offsets in yaw of 8.0 deg and 1.0 deg in pitch; these offsets are unchanged by the present analysis. The primary impact zone of oxygen, i.e., the directly exposed spot on a silver detector, had a ratio of major to minor axes equal to 1.05, which was interpreted as being caused by a small oscillation of plus or minus 0.35 degrees (with precision plus or minus 0.15 degrees). The present analysis shows that the observed effect can largely be accounted for by atmospheric corotation, but that an additional oscillation in yaw of the order of a degree cannot be excluded. The sensitivity of the pinhole camera to satellite oscillations is shown to decrease nonlinearly with decreasing magnitude of the oscillation and to vary inversely with the gas temperature.

Peters, Palmer N.↗
NASA NTRS2017

Thermal Expansion from Stochastic Nonlinear Acoustic Fields

The methods of stochastic mechanics are applied to nonlinear acoustic fields generated by random acoustic radiation sources associated with oscillating lattice sites in nonlinear lattices. The assumption of stochastically independent zero-point and temperature-dependent acoustic fields leads to expressions of the thermodynamic internal and Helmholtz free energies per unit mass in terms of modal energies per unit mass that account for the nonlinearity of the propagation modes. The thermodynamic state functions canonically transform to the familiar results of a system of quantized, simple harmonic oscillators in the linear field limit. The thermal expansion coefficient, derived from the Helmholtz free energy per unit mass, is obtained as a sum of the zero-point modal nonlinearity parameters, weighted by temperature-dependent, modal heat capacities. The relationship is fully anharmonic, in contrast to commonly used quasi-harmonic models, and predicts with excellent agreement the experimentally observed null thermal expansion of vitreous silica at the ‘cross-over’ temperature corresponding to the balance between long wavelength modes that contribute negative nonlinearity parameters to the modal sum and short wavelength modes that contribute positive nonlinearity parameters.

Cantrell, John H., Jr.↗
NASA NTRS2006

NASA Tech Briefs, September 2006

Topics covered include: Improving Thermomechanical Properties of SiC/SiC Composites; Aerogel/Particle Composites for Thermoelectric Devices; Patches for Repairing Ceramics and Ceramic- Matrix Composites; Lower-Conductivity Ceramic Materials for Thermal-Barrier Coatings; An Alternative for Emergency Preemption of Traffic Lights; Vehicle Transponder for Preemption of Traffic Lights; Automated Announcements of Approaching Emergency Vehicles; Intersection Monitor for Traffic-Light-Preemption System; Full-Duplex Digital Communication on a Single Laser Beam; Stabilizing Microwave Frequency of a Photonic Oscillator; Microwave Oscillators Based on Nonlinear WGM Resonators; Pointing Reference Scheme for Free-Space Optical Communications Systems; High-Level Performance Modeling of SAR Systems; Spectral Analysis Tool 6.2 for Windows; Multi-Platform Avionics Simulator; Silicon-Based Optical Modulator with Ferroelectric Layer; Multiplexing Transducers Based on Tunnel-Diode Oscillators; Scheduling with Automated Resolution of Conflicts; Symbolic Constraint Maintenance Grid; Discerning Trends in Performance Across Multiple Events; Magnetic Field Solver; Computing for Aiming a Spaceborne Bistatic- Radar Transmitter; 4-Vinyl-1,3-Dioxolane-2-One as an Additive for Li-Ion Cells; Probabilistic Prediction of Lifetimes of Ceramic Parts; STRANAL-PMC Version 2.0; Micromechanics and Piezo Enhancements of HyperSizer; Single-Phase Rare-Earth Oxide/Aluminum Oxide Glasses; Tilt/Tip/Piston Manipulator with Base-Mounted Actuators; Measurement of Model Noise in a Hard-Wall Wind Tunnel; Loci-STREAM Version 0.9; The Synergistic Engineering Environment; Reconfigurable Software for Controlling Formation Flying; More About the Tetrahedral Unstructured Software System; Computing Flows Using Chimera and Unstructured Grids; Avoiding Obstructions in Aiming a High-Gain Antenna; Analyzing Aeroelastic Stability of a Tilt-Rotor Aircraft; Tracking Positions and Attitudes of Mars Rovers; Stochastic Evolutionary Algorithms for Planning Robot Paths; Compressible Flow Toolbox; Rapid Aeroelastic Analysis of Blade Flutter in Turbomachines; General Flow-Solver Code for Turbomachinery Applications; Code for Multiblock CFD and Heat-Transfer Computations; Rotating-Pump Design Code; Covering a Crucible with Metal Containing Channels; Repairing Fractured Bones by Use of Bioabsorbable Composites; Kalman Filter for Calibrating a Telescope Focal Plane; Electronic Absolute Cartesian Autocollimator; Fiber-Optic Gratings for Lidar Measurements of Water Vapor; Simulating Responses of Gravitational-Wave Instrumentation; SOFTC: A Software Correlator for VLBI; Progress in Computational Simulation of Earthquakes; Database of Properties of Meteors; Computing Spacecraft Solar-Cell Damage by Charged Particles; Thermal Model of a Current-Carrying Wire in a Vacuum; Program for Analyzing Flows in a Complex Network; Program Predicts Performance of Optical Parametric Oscillators; Processing TES Level-1B Data; Automated Camera Calibration; Tracking the Martian CO2 Polar Ice Caps in Infrared Images; Processing TES Level-2 Data; SmaggIce Version 1.8; Solving the Swath Segment Selection Problem; The Spatial Standard Observer; Less-Complex Method of Classifying MPSK; Improvement in Recursive Hierarchical Segmentation of Data; Using Heaps in Recursive Hierarchical Segmentation of Data; Tool for Statistical Analysis and Display of Landing Sites; Automated Assignment of Proposals to Reviewers; Array-Pattern-Match Compiler for Opportunistic Data Analysis; Pre-Processor for Compression of Multispectral Image Data; Compressing Image Data While Limiting the Effects of Data Losses; Flight Operations Analysis Tool; Improvement in Visual Target Tracking for a Mobile Robot; Software for Simulating Air Traffic; Automated Vectorization of Decision-Based Algorithms; Grayscale Optical Correlator Workbench; "One-Stop Shopping" for Ocean Remote-Sensing and Model Data; State Analysis Database Tool; Generating CAHV and CAHVOmages with Shadows in ROAMS; Improving UDP/IP Transmission Without Increasing Congestion; FORTRAN Versions of Reformulated HFGMC Codes; Program for Editing Spacecraft Command Sequences; Flight-Tested Prototype of BEAM Software; Mission Scenario Development Workbench; Marsviewer; Tool for Analysis and Reduction of Scientific Data; ASPEN Version 3.0; Secure Display of Space-Exploration Images; Digital Front End for Wide-Band VLBI Science Receiver; Multifunctional Tanks for Spacecraft; Lightweight, Segmented, Mostly Silicon Telescope Mirror; Assistant for Analyzing Tropical-Rain-Mapping Radar Data; and Anion-Intercalating Cathodes for High-Energy- Density Cells.

Source record↗
NASA NTRS1998

Tunable Dielectric Materials and Devices for Broadband Wireless Communications

Wireless and satellite communications are a rapidly growing industries which are slated for explosive growth into emerging countries as well as countries with advanced economies. The dominant trend in wireless communication systems is towards broadband applications such as multimedia file transfer, video transmission and Internet access. These applications require much higher data transmission rates than those currently used for voice transmission applications. To achieve these higher data rates, substantially larger bandwidths and higher carrier frequencies are required. A key roadblock to implementing these systems at K-band (18-26.5 GHz) and Ka-band (26.5-40 GHz) is the need to develop hardware which meets the requirements for high data rate transmission in a cost effective manner. In this chapter, we report on the status of tunable dielectric thin films for devices, such as resonators, filters, phased array antennas, and tunable oscillators, which utilize nonlinear tuning in the control elements. Paraelectric materials such as Barium Strontium Titanate ((Ba, Sr)TiO3) have dielectric constants which can be tuned by varying the magnitude of the electric field across the material. Therefore, these materials can be used to control the frequency and/or phase response of various devices such as electronically steerable phased array antennas, oscillators, and filters. Currently, tunable dielectric devices are being developed for applications which require high tunability, low loss, and good RF power-handling capabilities at microwave and millimeter-wave frequencies. These properties are strongly impacted by film microstructure and device design, and considerable developmental work is still required. However, in the last several years enormous progress has occurred in this field, validating the potential of tunable dielectric technology for broadband wireless communication applications. In this chapter we summarize how film processing techniques, microwave test configurations, and prototype devices have combined to drive the field to its current stage of development.

Mueller, Carl H.↗
DOE OSTI2023

Compensation of Anisotropy in Spin Hall Devices for Neuromorphic Applications

Spintronic nano-oscillators and diodes with reduced nonlinearity benefit from low phase noise and improved device properties. Moreover, they could offer key advantages for realizing neuromorphic applications, such as spike-based neurons and frequency multiplexing in neural networks. Here, in this work, we experimentally demonstrate the reduction in nonlinearity of a spin Hall nano-oscillator (SHNO) by compensation of its effective magnetic anisotropy. The study involves optimization of Co/Ni multilayer growth to achieve the compensation, followed by spin-diode measurements on patterned microstrips to quantify their anisotropy. The relationship between the second- (H k 2 = 0.47 mT) and first-order ($H^{eff}_{k_1}$ = -0.8 mT) anisotropy fields reveals the existence of an easy cone, thereby validating the presence of compensation. Furthermore, we demonstrate a compensated spin diode that has a fixed frequency when the input power is varied. We then study the current-induced auto-oscillation properties of SHNOs on compensated films by patterning nanoconstrictions of 200 and 100 nm wide. The invariance of the resonance frequency and linewidth of the compensated SHNO with applied dc current indicates the absence of nonlinearity. This independence is maintained irrespective of the applied external fields and their orientations. The compensated SHNO obtained has a linewidth of 1.1 MHz and a peak output power of up to 1 pW/MHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2018

The Salience of Nonlinearities in the Boreal Winter Response to ENSO: North Pacific and North America

The prominence of nonlinearities in the response to El Niño as compared to La Niña, to moderate El Niño events as compared to extreme El Ninño events, and to different flavors of El Niño events, are analyzed using the NASA Goddard Earth Observing System Chemistry-Climate Model. In the Central North Pacific region where the sea level pressure response to El Niño-Southern Oscillation (ENSO) peaks, nonlinearities are relatively muted. In contrast, changes to the east of this region (i.e. the far-Northeastern Pacific) and to the north of this region (over Alaska) in response to different ENSO phases are more clearly nonlinear, and become statistically robust after more than 15 events are considered. The relative prominence of these nonlinearities is related to the zonal wavenumber of the tropical precipitation response. Associated with these nonlinearities over the far-Northeastern Pacific are nonlinearities in precipitation over Western United States and surface temperature over Northwest North America and Midwestern United States. In all regions at least 15 events of each type are necessary before nonlinearities can be identified as statistically significant at the 95% confidence level due to the presence of internal atmospheric variability. As there have only been a similar number of ENSO events to the total needed for significance since 1920, it is not surprising that it has been difficult to establish statistically significant nonlinearities using observational data.

Nonlinearities↗
DOE OSTI2024

Active oscillatory associative memory

Traditionally, physical models of associative memory assume conditions of equilibrium. Here, we consider a prototypical oscillator model of associative memory and study how active noise sources that drive the system out of equilibrium, as well as nonlinearities in the interactions between the oscillators, affect the associative memory properties of the system. Our simulations show that pattern retrieval under active noise is more robust to the number of learned patterns and noise intensity than under passive noise. To understand this phenomenon, we analytically derive an effective energy correction due to the temporal correlations of active noise in the limit of short correlation decay time. We find that active noise deepens the energy wells corresponding to the patterns by strengthening the oscillator couplings, where the more nonlinear interactions are preferentially enhanced. Using replica theory, we demonstrate qualitative agreement between this effective picture and the retrieval simulations. Our work suggests that the nonlinearity in the oscillator couplings can improve memory under nonequilibrium conditions.

Chemistry↗
DOE OSTI2023

Assessing the impact of Byzantine attacks on coupled phase oscillators

Abstract For many coupled dynamical systems, the interaction is the outcome of the measurement that each unit has of the others as e.g. in modern inverter-based power grids, autonomous vehicular platoons or swarms of drones, or it is the result of physical flows. Synchronization among all the components of these systems is of primal importance to avoid failures. The overall operational state of these systems therefore crucially depends on the correct and reliable functioning of the individual elements as well as the information they transmit through the network. Here, we investigate the effect of Byzantine attacks where one unit does not behave as expected, but is controlled by an external attacker. For such attacks, we assess the impact on the global collective behavior of nonlinearly coupled phase oscillators. We relate the synchronization error induced by the input signal to the properties of the attacked node. This allows to anticipate the potential of an attacker and identify which network components to secure.

Tyloo, Melvyn (ORCID:0000000317614095)↗