Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multi channel data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

DOE Data Days 2023 Report

The DOE Data Days (D3) workshop brings together data managers, developers, researchers, and program managers across the Department of Energy (DOE) and national laboratories to highlight data management successes, identify potential synergies and common problems, and establish channels for collaboration across the DOE data management community. The fourth D3 workshop was held on October 24th to 26th, 2023 held entirely in-person at Lawrence Livermore National Laboratory (LLNL). The workshop was organized by a multi laboratory committee in an effort to bring data management practitioners at the DOE laboratories together to share their work and results, facilitating knowledge transfers and best practices across project teams. Tools and platforms to support data management and analysis are rapidly evolving and provide enormous opportunities. This report summarizes the important discussions and recommendations from the different working sessions and contains the agenda, submitted abstracts, presentations with links to recorded presentations, breakout session summaries, list of registered attendees, and lessons learned for future organizing committee. The report will be distributed to the DOE, each participating institution’s programmatic stakeholders, and attendees. The dedicated D3 website will host presentations, agenda, and report that is accessible by all labs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
NASA NTRS2001

A New "Cloud Mode" for the AERONET

A key to predicting climate change is to observe an understand the global distribution of clouds and their physical properties such as optical thickness and droplet size. Since clouds change rapidly over short time and space intervals, they are difficult to simulate in computer models. But it is essential that global climate models predict realistic spatial and temporal distribution of cloud optical depth. The best way to verify these distributions is to infer optical depth from global coverage satellite data. However, satellite methods have many sources of uncertainty; thus, independent and reliable ground-based estimates are essential for validation. For aerosol, there is the AERONET - a ground based monitoring network that consists of identical multi-channel radiometers for assessing aerosol optical properties and validating their satellite retrievals. In addition to AEROSOL, we want the network monitoring CLOUD optical properties. It will use AERONET "time" (inappropriate for aerosol studies) to make basic new measurements related to cloud physics. In the presentation we will report on a new technique that retrieves cloud optical thickness for even broken clouds above green vegetation from surface measurements of zenith radiance in the visible (VIS) and near-IR (NIR) spectral regions. The idea of the method is simple: since green vegetation reflects 40-50% of incoming radiation in the NIR and only 5-10% in the VIS region, ground measurements under thin clouds have little spectral contrast between VIS and NIR, while thick clouds reflect much more of the surface-reflected radiation in the NIR than in VIS. Based on this idea, we use a combination of measurements (spectral indices) in VIS and NIR to estimate cloud optical thickness. By analogy with NDVI, the simplest index that can be defined is the Normalized Difference Cloud Index (NDCI) which is a ratio between the difference and the sum of two radiances measured for two narrow spectral bands in VIS and NIR.

Marshak, Alexander↗
NASA NTRS2020

The NASA MODIS-VIIRS Continuity Cloud Optical Properties Products

The NASA Aqua MODIS and Suomi National Polar-Orbiting Partnership (SNPP) Visible Infrared Imaging Radiometer Suite (VIIRS) climate data record continuity cloud properties products (CLDPROP) were publicly released in April 2019 with an update later that year (Version 1.1). These cloud products, having heritage with the NASA Moderate-resolution Imaging Spectroradiometer (MODIS) MOD06 cloud optical properties product and the NOAA GOES-R Algorithm Working Group (AWG) Cloud Height Algorithm (ACHA), represent an effort to bridge the multispectral imager records of NASA’s Earth Observing System (EOS) and NOAA’s current generation of operational weather satellites to achieve a continuous, multi-decadal climate data record for clouds that can extend well into the 2030s. CLDPROP offers a “continuity of approach,” applying common algorithms and ancillary datasets to both MODIS and VIIRS, including utilizing only a subset of spectral channels available on both sensors to help mitigate instrument differences. The initial release of the CLDPROP_MODIS and CLDPROP_VIIRS data records spans the SNPP observational record (2012-present). Here, we present an overview of the algorithms and an evaluation of the intersensor continuity of the core CLDPROP_MODIS and CLDPROP_VIIRS cloud optical property datasets, i.e., cloud thermodynamic phase, optical thickness, effective particle size, and derived water path. The evaluation includes analyses of pixel-level MODIS/VIIRS co-locations as well as spatial and temporal aggregated statistics, with a focus on identifying and understanding the root causes of individual dataset discontinuities. The results of this evaluation will inform future updates to the CLDPROP products and help scientific users determine the appropriate use of the product datasets for their specific needs.

satellite remote sensing↗
NASA NTRS2014

The Airborne Cloud-Aerosol Transport System: Overview and Description of the Instrument and Retrival Algorithms - Part I

The Airborne Cloud-Aerosol Transport System (ACATS) is a multi-channel Doppler lidar system recently developed at NASA Goddard Space Flight Center (GSFC). A unique aspect of the multi-channel Doppler lidar concept such as ACATS is that it is also, by its very nature, a high spectral resolution lidar (HSRL). Both the particulate and molecular scattered signal can be directly and unambiguously measured, allowing for direct retrievals of particulate extinction. ACATS is therefore capable of simultaneously resolving the backscatterextinction properties and motion of a particle from a high altitude aircraft. ACATS has flown on the NASA ER-2 during test flights over California in June 2012 and science flights during the Wallops Airborne Vegetation Experiment (WAVE) in September 2012. This paper provides an overview of the ACATS method and instrument design, describes the ACATS retrieval algorithms for cloud and aerosol properties, and demonstrates the data products that will be derived from the ACATS data using initial results from the WAVE project. The HSRL retrieval algorithms developed for ACATS have direct application to future spaceborne missions such as the Cloud-Aerosol Transport System (CATS) to be installed on the International Space Station (ISS). Furthermore, the direct extinction and particle wind velocity retrieved from the ACATS data can be used for science applications such 27 as dust or smoke transport and convective outflow in anvil cirrus clouds.

HSRL↗
NASA NTRS1973

Design study report. Volume 2: Electronic unit

The recording system discussed is required to record and reproduce wideband data from either of the two primary Earth Resources Technology Satellite sensors: Return Beam Vidicon (RBV) camera or Multi-Spectral Scanner (MSS). The camera input is an analog signal with a bandwidth from dc to 3.5 MHz; this signal is accommodated through FM recording techniques which provide a recorder signal-to-noise ratio in excess of 39 db, black-to-white signal/rms noise, over the specified bandwidth. The MSS provides, as initial output, 26 narrowband channels. These channels are multiplexed prior to transmission, or recording, into a single 15 Megabit/second digital data stream. Within the recorder, the 15 Megabit/second NRZL signal is processed through the same FM electronics as the RBV signal, but the basic FM standards are modified to provide an internal, 10.5 MHz baseland response with signal-to-noise ratio of about 25 db. Following FM demodulation, however, the MSS signal is digitally re-shaped and re-clocked so that good bit stability and signal-to-noise exist at the recorder output.

Source record↗
NASA NTRS1983

Adaptation of a software development methodology to the implementation of a large-scale data acquisition and control system

A progress report is presented on a program to upgrade the existing NASA Deep Space Network in terms of a redesigned computer-controlled data acquisition system for channelling tracking, telemetry, and command data between a California-based control center and three signal processing centers in Australia, California, and Spain. The methodology for the improvements is oriented towards single subsystem development with consideration for a multi-system and multi-subsystem network of operational software. Details of the existing hardware configurations and data transmission links are provided. The program methodology includes data flow design, interface design and coordination, incremental capability availability, increased inter-subsystem developmental synthesis and testing, system and network level synthesis and testing, and system verification and validation. The software has been implemented thus far to a 65 percent completion level, and the methodology being used to effect the changes, which will permit enhanced tracking and communication with spacecraft, has been concluded to feature effective techniques.

Madrid, G. A.↗
NASA NTRS2012

Airborne Measurements of Atmospheric Pressure made Using an IPDA Lidar Operating in the Oxygen A-Band

We report airborne measurements of atmospheric pressure made using an integrated path differential absorption (IPDA) lidar that operates in the oxygen A-band near 765 nm. Remote measurements of atmospheric temperature and pressure are needed for NASA s Active Sensing of CO2 Emissions Over Nights, Days, and Seasons (ASCENDS) mission to measure atmospheric CO2. Accurate measurements of tropospheric CO2 on a global scale are very important in order to better understand its sources and sinks and to improve our predictions of climate change. The goal of ASCENDS is to determine the CO2 dry mixing ratio with lidar measurements from space at a level of ~1 ppm. Analysis to date shows that with current weather models, measurements of both the CO2 column density and the column density of dry air are needed. Since O2 is a stable molecule that uniformly mixed in the atmosphere, measuring O2 absorption in the atmosphere can be used to infer the dry air density. We have developed an airborne (IPDA) lidar for Oxygen, with support from the NASA ESTO IIP program. Our lidar uses DFB-based seed laser diodes, a pulsed modulator, a fiber laser amplifier, and a non-linear crystal to generate wavelength tunable 765 nm laser pulses with a few uJ/pulse energy. The laser pulse rate is 10 KHz, and average transmitted laser power is ~20 mW. Our lidar steps laser pulses across a selected line O2 doublet near 764.7 nm in the Oxygen A-band. The direct detection lidar receiver uses a 20 cm diameter telescope, a Si APD detector in Geiger mode, and a multi-channel scalar to detect and record the time resolved laser backscatter in 40 separate wavelength channels. Subsequent analysis is used to estimate the transmission line shape of the doublet for the laser pulses reflected from the ground. Ground based data analysis allows averaging from 1 to 60 seconds to increase SNR in the transmission line shape of the doublet. Our retrieval algorithm fits the expected O2 lineshapes against the measurements and determines the atmospheric pressure by minimizing the error between the observations and model. We first demonstrated our airborne lidar during flights during summer 2010. We made several improvements and made measurements during the Ascends flights during July 2011. More information about the technique, lidar instrument, airborne measurements, and pressure estimates will be described in the presentation.

Riris, Haris↗
NASA NTRS2021

Sky-Scanning Sun-Tracking Airborne Radiometer (3STAR): Instrument Design, Flight Testing, and Tracking Performance

The Sky-Scanning, Sun-Tracking Airborne Radiometer (3STAR) adapts commercial radiometer technology developed for the ocean color research community to airborne measurement of spectrally resolved solar irradiance and sky radiance. These atmospheric observations are used to derive aerosol optical depth (AOD), supporting localized AOD inputs for atmospheric correction of satellite and airborne data over terrestrial and aquatic (including optically dark) targets. The ability to regionally “tune” atmospheric correction schemes with relevant spatial AOD supports constraining atmospheric correction of remote sensing reflectance. Very wide dynamic range has been achieved for multi-channel band-pass-filter-radiometers originally designed for deployment into the water column. By actively tracking and directly pointing to the Sun, the light attenuation by aerosol particles in the atmospheric column can be quantified. These measurements improve knowledge of atmospheric constituents and the atmospheric corrections required to improve remote sensing capabilities for interpreting reflectance measurements from the Earth surface. 3STAR incorporates a custom Sun-tracking/sky-scanning pointing head, a Sun-tracking camera, and a commercially available, cylindrical, 19-channel radiometer tube assembly. An accurate and responsive mount and tracking system has been developed and certified to NASA and Naval Air Systems Command (NAVAIR) airworthiness standards for deployment into the aircraft slipstream. Ground and flight testing indicate typical tracking errors of less than 0.1 degrees, well within the field of view of the radiometer as required to minimize measurement uncertainty from alignment error. Preliminary AOD measurements compare to within 0.013 with 15 measurements from an Aerosol Robotic Network (AERONET) Cimel instrument at 500 nm wavelength and low solar angle.

Atmosphere↗
NASA NTRS2011

NASA Tech Briefs, December 2011

Topics covered include: 1) SNE Industrial Fieldbus Interface; 2) Composite Thermal Switch; 3) XMOS XC-2 Development Board for Mechanical Control and Data Collection; 4) Receiver Gain Modulation Circuit; 5) NEXUS Scalable and Distributed Next-Generation Avionics Bus for Space Missions; 6) Digital Interface Board to Control Phase and Amplitude of Four Channels; 7) CoNNeCT Baseband Processor Module; 8) Cryogenic 160-GHz MMIC Heterodyne Receiver Module; 9) Ka-Band, Multi-Gigabit-Per-Second Transceiver; 10) All-Solid-State 2.45-to-2.78-THz Source; 11) Onboard Interferometric SAR Processor for the Ka-Band Radar Interferometer (KaRIn); 12) Space Environments Testbed; 13) High-Performance 3D Articulated Robot Display; 14) Athena; 15) In Situ Surface Characterization; 16) Ndarts; 17) Cryo-Etched Black Silicon for Use as Optical Black; 18) Advanced CO2 Removal and Reduction System; 19) Correcting Thermal Deformations in an Active Composite Reflector; 20) Umbilical Deployment Device; 21) Space Mirror Alignment System; 22) Thermionic Power Cell To Harness Heat Energies for Geothermal Applications; 23) Graph Theory Roots of Spatial Operators for Kinematics and Dynamics; 24) Spacesuit Soft Upper Torso Sizing Systems; 25) Radiation Protection Using Single-Wall Carbon Nanotube Derivatives; 26) PMA-PhyloChip DNA Microarray to Elucidate Viable Microbial Community Structure; 27) Lidar Luminance Quantizer; 28) Distributed Capacitive Sensor for Sample Mass Measurement; 29) Base Flow Model Validation; 30) Minimum Landing Error Powered-Descent Guidance for Planetary Missions; 31) Framework for Integrating Science Data Processing Algorithms Into Process Control Systems; 32) Time Synchronization and Distribution Mechanisms for Space Networks; 33) Local Estimators for Spacecraft Formation Flying; 34) Software-Defined Radio for Space-to-Space Communications; 35) Reflective Occultation Mask for Evaluation of Occulter Designs for Planet Finding; and 36) Molecular Adsorber Coating

Source record↗
DOE OSTI2025

Elucidating the Dynamics of Electroweak Symmetry Breaking through Study of High-Multiplicity Boson Final States at the LHC

To understand the full story of the electroweak symmetry breaking (EWSB) and how the universe arrived at today’s universe, the structure of the Higgs potential needs to be probed. We must carefully select and study processes at the LHC that are sensitive to the Higgs potential. In this context, longitudinal vector boson scattering (VBS) processes, V L V L →V L V L , and di-Higgs production, including V L V L →HH at the LHC have been studied for any potential deviation from SM prediction. However, many classes of models beyond the Standard Model (BSM) may result in the 2→2 process being perfectly well-behaved and SM-like but show interesting deviations in 2→3, 2→4, or 2→n(3) processes. If we are to complete the mission objectives the P5 laid out, then a large swath of 2→n(3) must be thoroughly searched and checked. The research supported by this award used data collected at the Compact Muon Solenoid (CMS) detector at the Large Hadron Collider (LHC) to explore VBS produced VVH process in the semi-merged channel. In addition, in the electroweak sector, there are open questions in the multi-gauge boson couplings and the Higgs couplings to the gauge bosons. The research supported by the award also studied the triboson production WWZ process at the LHC, which is a crossed diagram of a VBS process. During the funded period of 9 months, the analysis designs have been finalized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1987

Investigation of multi-dimensional algorithms using active and passive microwave data for ice concentration determination

A discussion is presented concerning the effect of variations in ice surface characteristics on the concentration calculations, in order to ascertain how active and passive microwave data can be optimally combined. Attention is given to dual-polarized, multifrequency passive microwave sensors and to single-channel SAR, in virtue of their availability in the near future. An examination of SAR intensity data at both 1 and 10 GHz indicates that the latter are much less sensitive to ice type and surface condition variations such as wetness and ridging. The Advanced Multichannel Microwave Radiometer is discussed.

Cavalieri, Donald J.↗
DOE OSTI2024

Quantum teleportation coexisting with classical communications in optical fiber

The ability for quantum and conventional networks to operate in the same optical fibers would aid the deployment of quantum network technology on a large scale. Quantum teleportation is a fundamental operation in quantum networking, but has yet to be demonstrated in fibers populated with high-power conventional optical signals. Here we report, to the best of our knowledge, the first demonstration of quantum teleportation over fibers carrying conventional telecommunications traffic. Quantum state transfer is achieved over a 30.2-km fiber carrying 400-Gbps C-band classical traffic with a Bell state measurement performed at the fiber’s midpoint. To protect quantum fidelity from spontaneous Raman scattering noise, we use optimal O-band quantum channels, narrow spectro-temporal filtering, and multi-photon coincidence detection. Fidelity is shown to be well maintained with an elevated C-band launch power of 18.7 dBm for the single-channel 400-Gbps signal, which we project could support multiple classical channels totaling many terabits/s aggregate data rates. These results show the feasibility of advanced quantum and classical network applications operating within a unified fiber infrastructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2004

Development of a Submillimeter/Far-Infrared Radiometer for Cirrus Measurements

We introduce a low-cost, lightweight and compact polarisation-sensitive radiometer for the measurement of Cirrus clouds in the submillimeter and far-infrared region (10 150 cm-1). It is widely recognised that enhanced global measurements of cirrus properties are essential to the development of General Circulation and Climate Prediction Models since cirrus clouds have a strong effect on the Earth's Global Radiation Budget. The purpose of this project is to design and build a novel instrument suitable for aircraft deployment in order to measure Ice Water Path (IWP) along with cirrus particle size and shape. This airborne instrument, which is currently under development in Cardiff, will serve as a prototype for a future satellite-based radiometer. The radiometer will capitalize on the ongoing measurements of the NASA-led, Fourier Transform interferometer-based, FIRSC (Far-Infrared Sensor for Cirrus) instrument for which Cardiff has been closely associated. Data from FIRSC campaigns is being used to select optimum radiometer channels that exhibit good sensitivity to specific cirrus. This new multichannel radiometer will, however, have some key advantages over similar spectroscopic instruments, for example, portability, increased optical efficiency, a multi-angle field of view and a reduced integration period leading to an improved spatial resolution. The radiometer will benefit from the application of state-of-the-art submm/FIR polarizer and solid filter technology currently being developed in Cardiff. The instrument will require a detector array that is robust enough to withstand aircraft/space deployment.

Hayton, Darren↗
NASA NTRS1977

The inversion of stratospheric aerosol and ozone vertical profiles from spacecraft solar extinction measurements

The inversions of multi-channel solar extinction measurements have been analyzed for the 0.35-1.0 micron wavelength region to retrieve stratospheric aerosol and ozone vertical profiles using both the constrained linear inversion scheme and the iterative scheme. The inversions of the multi-wavelength solar extinction data obtained from spacecraft have been analyzed based on the inversion of computer simulated data using various atmospheric models with differing amounts of aerosol and ozone in the stratosphere. The sensitivities of the inversion schemes to different experimental errors are discussed in terms of accuracy and resolution of the retrieved profiles.

Chu, W. P.↗
DOE OSTI2022

Development of a calculation framework coupling Monte Carlo neutronics, subchannel thermal-hydraulics and 1.5D fuel thermo-mechanics

A coupled calculation system consisting of the Monte Carlo neutronic solver SERPENT and the fuel behaviour solver TRANSURANUS was extended with the sub-channel thermal-hydraulic solver SUBCHANFLOW to form a coupled calculation framework for multi-physics reactor analyses. The coupling between the 3 solvers was accomplished via a driver program written in Perl that runs the solvers, processes and transfers the output data between the solvers and monitors the convergence. While some features of the coupling are still under development, a steady-state coupled calculation resulting in convergence was performed for a single hexagonal fuel assembly to demonstrate that the base functionalities work as expected. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2014

Sport Transition of JPSS VIIRS Imagery for Night-time Applications

The NASA/Short‐term Prediction, Research, and Transition (SPoRT) Program and NOAA/Cooperative Institute for Research in the Atmosphere (CIRA) work within the NOAA/Joint Polar Satellite System (JPSS) Proving Ground to demonstrate the unique capabilities of the VIIRS instrument. Very similar to MODIS, the VIIRS instrument provides many high‐resolution visible and infrared channels in a broad spectrum. In addition, VIIRS is equipped with a low‐light sensor that is able to detect light emissions from the land and atmosphere as well as reflected sunlight by the lunar surface. This band is referred to as the Day‐Night Band due to the sunlight being used at night to see cloud and topographic features just as one would typically see in day‐time visible imagery. NWS forecast offices that collaborate with SPoRT and CIRA have utilized MODIS imagery in operations, but have longed for more frequent passes of polar‐orbiting data. The VIIRS instrument enhances SPoRT collaborations with WFOs by providing another day and night‐time pass, and at times two additional passes due to its large swath width. This means that multi‐spectral, RGB imagery composites are more readily available to prepare users for their use in GOES‐R era and high‐resolution imagery for use in high‐latitudes is more frequently able to supplement standard GOES imagery within the SPoRT Hybrid GEO‐LEO product. The transition of VIIRS also introduces the new Day‐Night Band capability to forecast operations. An Intensive Evaluation Period (IEP) was conducted in Summer 2013 with a group of "Front Range" NWS offices related to VIIRS night‐time imagery. VIIRS single‐channel imagery is able to better analyze the specific location of fire hotspots and other land features, as well as provide a more true measurement of various cloud and aerosol properties than geostationary measurements, especially at night. Viewed within the SPoRT Hybrid imagery, the VIIRS data allows forecasters to better interpret the more frequent, but coarse GOES Imagery. Night‐time Microphysics and Dust RGB Imagery provides cloud analysis of cloud height, thickness, and composition in order for operational applications such as separating fog from low clouds, dust plume detection, and determining precipitating clouds in radar-void/ blocked regions. The Day‐Night Band has a particular benefit to seeing light from cities, fires, or other emissions as well as the reflection of moonlight off of clouds and smoke plumes, given the right lunar phase and angle. Examples from the VIIRS transition and IEP will be presented.

Fuell, Kevin↗
DOE OSTI2023

Compact high repetition rate Thomson parabola ion spectrometer

Here, we present the development of a compact Thomson parabola ion spectrometer capable of characterizing the energy spectra of various ion species of multi-MeV ion beams from >10 20 W/cm 2 laser produced plasmas at rates commensurate with the highest available from any of the current and near-future PW-class laser facilities. This diagnostic makes use of a polyvinyl toluene based fast plastic scintillator (EJ-260), and the emitted light is collected using an optical imaging system coupled to a thermoelectrically cooled scientific complementary metal–oxide–semiconductor camera. This offers a robust solution for data acquisition at a high repetition rate, while avoiding the added complications and nonlinearities of micro-channel plate based systems. Different ion energy ranges can be probed using a modular magnet setup, a variable electric field, and a varying drift-distance. We have demonstrated operation and data collection with this system at up to 0.2 Hz from plasmas created by irradiating a solid target, limited only by the targeting system. With the appropriate software, on-the-fly ion spectral analysis will be possible, enabling real-time experimental control at multi-Hz repetition rates.

47 OTHER INSTRUMENTATION↗