Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modeling and analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Geomagnetically Induced Current Field Test on Large Grid-Connected Power Transformers: Analysis, Model Development, and Simulations

Geomagnetic-induced current (GIC) flow in power grids can cause undesirable effects such as transformer overheating, harmonics, higher reactive power demand, etc. Many simulation models have been developed to study these effects, but real-world verification on modern transformer designs is rare. Here, this paper presents the first long-duration GIC field test in the U.S. performed on high-voltage, grid-connected transformers featuring winding clamps and tie rods instead of conventional tie bars. Field measurements were taken to evaluate GIC effects. These measurements also aided in developing and validating thermal and electromagnetic transient (EMT) models of the transformers. During the test, significant current and voltage distortions were observed along with considerable transformer reactive power losses. Analysis of the field measurements showed that the transformers’ hottest spot was at the inner windings, and their k-factors were close to factory test and software default values. Thermal simulations indicated that the transformers would not violate their thermal limits even for a GIC waveform that peaks at about 200 A/phase. EMT simulations revealed that increased transformer loading may reduce GIC-induced reactive power demand and harmonics in certain scenarios. The study also highlighted potential inaccuracies in using the k-factor method to calculate transformer reactive power losses.

EMTDC↗

Mixing model analysis of telescopic lunar spectra

We have analyzed very high quality reflectance spectra of the lunar surface from the University of Hawaii lunar spectral data collection using a spectral mixing model. The spectra analyzed are those of 45 mare sites and 75 highland sites. The spectra were selected on the basis of very high signal to noise ratios based on error bars and point to point scatter, and on quality of removal of telluric water bands. The spectral mixing model used 7 components, not all of which were used in each fit. Four of the components were mineral spectra of the orthopyroxene, a clinopyroxene, an olivine and an anorthite, measured at the Brown University's RELAB. All of the minerals were 45-90 micron splits. Lunar soil contains other components which have the effect of reddening and darkening the soil as well as reducing spectral contrast. In addition, lunar soil contains spectral neutral bright material (likely very fine grained feldspar) which serves to reduce spectral contrast and brighten soils. Early attempts to fit many of the spectra pointed out the need for a component which has a very broad smooth absorption feature centered near 1.1 microns. Glass is a good candidate for this component. For the bright component we used a flat reflectance of 70 percent to represent fine grained feldspar. For the 'glass' component we used a telescopic spectrum of a pyroclastic glass present on the Aristarchus plateau which is characterized by a strong smooth band centered at 1.07 microns. In addition to exhibiting the glass band this spectrum is very red and has a low albedo. On the assumption that the dark component and the red component are agglutinates, which is reasonable but not necessarily true, we sought a dark red component. To derive its properties we modelled the spectrum of an Apollo 16 soil (16xxx) and assumed the dark red component to comprise 60 percent of the soil, appropriate to agglutinate abundance in mature soil. We adjusted the albedo and slope of a straight line representing the dark red component until the contrast and albedo of the model spectrum matched the soil spectrum. The mixing was done after conversion to a single scattering albedo.

Lucey, Paul G.↗

LANDSAT-D MSS/TM tuned orbital jitter analysis model LDS900

The final LANDSAT-D orbital dynamic math model (LSD900), comprised of all test validated substructures, was used to evaluate the jitter response of the MSS/TM experiments. A dynamic forced response analysis was performed at both the MSS and TM locations on all structural modes considered (thru 200 Hz). The analysis determined the roll angular response of the MSS/TM experiments to improve excitation generated by component operation. Cross axis and cross experiment responses were also calculated. The excitations were analytically represented by seven and nine term Fourier series approximations, for the MSS and TM experiment respectively, which enabled linear harmonic solution techniques to be applied to response calculations. Single worst case jitter was estimated by variations of the eigenvalue spectrum of model LSD 900. The probability of any worst case mode occurrence was investigated.

Pollak, T. E.↗

Tularosa Basin Play Fairway Analysis: Modeled MT Resistivity Data for the McGregor Range, New Mexico

This is the inversion resistivity data from a magnetotelluric survey done as part of Phase 2 Tularosa Basin, New Mexico, geothermal play fairway analysis. The data covers part of McGregor Range, Fort Bliss. The inversion was done by Phil Wannamaker and Virginia Maris of the Energy & Geoscience Institute at the University of Utah. The data are contained in a text file and data coordinates represent grid cell centers.

15 GEOTHERMAL ENERGY↗

The Effects of Variable Mass and Geometry, Pretwist, Shear Deformation and Rotatory Inertia on the Resonant Frequencies of Intact Long Bones: A Finite Element Model Analysis

The influence of pretwist, nonuniformities in mass and flexural stiffness, rotatory inertia and shear deformation on the natural frequencies of intact bones is evaluated by means of a linear elastic, finite-element model which has been programmed for solution on the digital computer. Theoretical results are compared to the results on the forced vibration of intact canine radii obtained experimentally by Thompson. Surprisingly, inclusion of fairly large pretwist angles (from -14 to 12 deg for one specimen) had little affect on the first three frequencies of transverse vibration in either the cranial or lateral directions. Inclusion of shear deformation reduced the third-mode frequency in the stiffest (lateral) direction by about six percent, otherwise shear deformation played a minor role in determining natural frequencies. Similarly. rotatory inertia had negligible influence up to the third natural frequency. The predominant influence on the first three natural frequencies of transverse vibration could be attributed to the variations in mass and flexural stiffness along the length of the test specimens. Different effective moduli of elasticity are required to yield correct absolute values for the frequencies which correspond to experimental findings. thus implying the presence of some inhomogeneities in material properties around the bone cross-section and/or along its length.

Young, Donald R.↗

Impact of volcanic eruptions on CMIP6 decadal predictions: a multi-model analysis

Abstract. In recent decades, three major volcanic eruptions of different intensity have occurred (Mount Agung in 1963, El Chichón in 1982 and Mount Pinatubo in 1991), with reported climate impacts on seasonal to decadal timescales that could have been potentially predicted with accurate and timely estimates of the associated stratospheric aerosol loads. The Decadal Climate Prediction Project component C (DCPP-C) includes a protocol to investigate the impact of volcanic aerosols on the climate experienced during the years that followed those eruptions through the use of decadal predictions. The interest of conducting this exercise with climate predictions is that, thanks to the initialisation, they start from the observed climate conditions at the time of the eruptions, which helps to disentangle the climatic changes due to the initial conditions and internal variability from the volcanic forcing. The protocol consists of repeating the retrospective predictions that are initialised just before the last three major volcanic eruptions but without the inclusion of their volcanic forcing, which are then compared with the baseline predictions to disentangle the simulated volcanic effects upon climate. We present the results from six Coupled Model Intercomparison Project Phase 6 (CMIP6) decadal prediction systems. These systems show strong agreement in predicting the well-known post-volcanic radiative effects following the three eruptions, which induce a long-lasting cooling in the ocean. Furthermore, the multi-model multi-eruption composite is consistent with previous work reporting an acceleration of the Northern Hemisphere polar vortex and the development of El Niño conditions the first year after the eruption, followed by a strengthening of the Atlantic Meridional Overturning Circulation the subsequent years. Our analysis reveals that all these dynamical responses are both model- and eruption-dependent. A novel aspect of this study is that we also assess whether the volcanic forcing improves the realism of the predictions. Comparing the predicted surface temperature anomalies in the two sets of hindcasts (with and without volcanic forcing) with observations we show that, overall, including the volcanic forcing results in better predictions. The volcanic forcing is found to be particularly relevant for reproducing the observed sea surface temperature (SST) variability in the North Atlantic Ocean following the 1991 eruption of Pinatubo.

Bilbao, Roberto (ORCID:0000000307294980)↗

A Multi-Model Analysis of the Regional and Sectoral Roles of Bioenergy in Near- and Long-Term CO2 Emissions

We study the near term and the longer term the contribution of bioenergy in different LIMITS scenarios as modeled by the participating models in the LIMITS project. With These scenarios have proven useful for exploring a range of outcomes for bioenergy use in response to both regionally diverse near term policies and the transition to a longer-term global mitigation policy and target. The use of several models has provided a source of heterogeneity in terms of incorporating uncertain assumptions about future socioeconomics and technology, as well as different paradigms for how the world may respond to policies. The results have also highlighted the heterogeneity and versatility of bioenergy itself, with different types of resources and applications in several energy sectors. In large part due to this versatility, the contribution of bioenergy to climate mitigation is a robust response across all models, despite their differences.

Bioenergy↗

ABC-model analysis of gain-switched pulse characteristics in low-dimensional semiconductor lasers

The gain-switching dynamics of low-dimensional semiconductor lasers is simulated numerically by using a two-dimensional rate-equation model. Use is also made of the ABC model, where the carrier recombination rate is described by a function of carrier densities including Shockley – Read – Hall (SRH) recombination coefficient A, spontaneous emission coefficient B and Auger recombination coefficient C. Effects of the ABC parameters on the ultrafast gain-switched pulse characteristics with high-density pulse excitation are analysed. It is found that while the parameter A has almost no obvious effects, the parameters B and C have distinctly different effects: B influences significantly the delay time of the gain-switched pulse, while C affects mainly the pulse intensity. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Studies and Model Analysis of Noble Gas Fractionation in Porous Media

Core Ideas Ambient noble gases in porous media fractionate from through‐flow of other gases. CO 2 fluxes and noble‐gas fractionation are measured in simple sandbox experiments. Modeled fractionation provides indirect proxy, e.g., of steady CO 2 leakage fluxes. The noble gases, which are chemically inert under normal terrestrial conditions but vary systematically across a wide range of atomic mass and diffusivity, offer a multicomponent approach to investigating gas dynamics in unsaturated soil horizons, including transfer of gas between saturated zones, unsaturated zones, and the atmosphere. To evaluate the degree to which fractionation of noble gases in the presence of an advective–diffusive flux agrees with existing theory, a simple laboratory sand column experiment was conducted. Pure CO 2 was injected at the base of the column, providing a series of constant CO 2 fluxes through the column. At five fixed sampling depths within the system, samples were collected for CO 2 and noble gas analyses, and ambient pressures were measured. Both the advection–diffusion and dusty gas models were used to simulate the behavior of CO 2 and noble gases under the experimental conditions, and the simulations were compared with the measured depth‐dependent concentration profiles of the gases. Given the relatively high permeability of the sand column (5 × 10 −11 m 2 ), Knudsen diffusion terms were small, and both the dusty gas model and the advection–diffusion model accurately predicted the concentration profiles of the CO 2 and atmospheric noble gases across a range of CO 2 flux from ∼700 to 10,000 g m −2 d −1 . The agreement between predicted and measured gas concentrations demonstrated that, when applied to natural systems, the multi‐component capability provided by the noble gases can be exploited to constrain component and total gas fluxes of non‐conserved (CO 2 ) and conserved (noble gas) species or attributes of the soil column relevant to gas transport, such as porosity, tortuosity, and gas saturation.

54 ENVIRONMENTAL SCIENCES↗

Pair-truncated shell-model analysis of nuclei around mass 130

Low-lying states for even-even, odd-mass, and doubly odd nuclei in the mass A{approx}130 region are systematically investigated using a pair-truncated shell model. In this model the collective nucleon pairs with angular momenta zero and two are the basic ingredients for even-even nuclei. Additional unpaired nucleons are added to the even-even core for a description of odd-mass and doubly odd nuclei. The effective interactions consist of single-particle energies and monopole and quadrupole pairing plus quadrupole-quadrupole interactions, whose strengths are assumed to be linearly changed as functions of the number of nucleons so as to describe the level schemes of the even-even and odd-mass nuclei. Energy levels of the low-lying collective states for even-even Xe, Ba, Ce, and Nd isotopes are reproduced very well along with intraband and interband B(E2) values, which simulate the typical features of the O(6) limit of the interacting boson model. For odd-mass and doubly odd nuclei, complicated level schemes and electromagnetic moments are in excellent agreement with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Model Analysis of the $p\pi^+\pi^-$ Electroproduction Reaction on the Proton.

The recent CLAS data on the $p\pi^+\pi^-$ electroproduction reaction off protons at 1.3$<$W$<$1.57 GeV and 0.25$<$$Q^{2}$$<$0.6 GeV$^{2}$ have been analyzed using a phenomenological model. By fitting nine 1-fold differential cross section data covering the entire kinematics of recent CLAS measurements, all mechanisms contributing significantly to charged double pion electroproduction are identified from their manifestations in observables. We have extracted the cross sections for coherent sum of all isobar channel amplitudes, as well as isobar channel cross sections. We also obtained non-resonant partial wave amplitudes which are needed in advancing a complete coupled-channel analysis of all meson electroproduction data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biomechanical Modeling Analysis of Loads Configuration for Squat Exercise

INTRODUCTION: Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to assist loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft for travel to the Moon or to Mars is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. METHODS The computational models currently under development utilize the OpenSim [1] software platform, consisting of open source code for musculoskeletal modeling, using biomechanical input data from test subjects for estimation of muscle and joint loads. The OpenSim Full Body Model [2] is used for all analyses. The model incorporates simplified wrap surfaces, a new knee model and updated lower body muscle parameters derived from cadaver measurements and magnetic resonance imaging of young adults. The upper body uses torque actuators at the lumbar and extremity joints. The test subjects who volunteer for this study are instrumented with reflective markers for motion capture data collection while performing squat exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device (ZIN Technologies, Middleburg Heights, OH). Ground reaction force data is collected with force plates under the feet, and device loading is recorded through load cells internal to the HULK. Test variables include the applied device load and the dual cable long bar or single cable T-bar interface between the test subject and the device. Data is also obtained using free weights with the identical loading for a comparison to the resistively loaded exercise device trials. The data drives the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. RESULTS Lower body kinematics, joint moments, joint forces and muscle forces are obtained from the OpenSim biomechanical analysis of the squat exercises under different loading conditions. Preliminary results from the model for the loading conditions will be presented as will hypotheses developed for follow on work.

Human Factors Engineering↗

Modeling, analysis, and code/data validation of DIII-D tokamak divertor experiments on ELM and non-ELM plasma tungsten sputtering erosion

Abstract We analyzed recent DIII-D tokamak tungsten divertor probe experiments using advanced, coupled, sputter erosion/redeposition, plasma, and surface response code packages. Modeling is done for ELMing H-mode, and L-mode plasmas, impinging on various size tungsten deposits on Divertor Material Evaluation System (DiMES) carbon probes. The simulations compute 3D, full kinetic, sub-gyromotion, impurity sputtering and transport, including changes in tungsten surface composition and response due to mixed deuterium and carbon ions irradiation. Per our analysis, ELM (edge localized mode) plasma sputtering in DIII-D mostly involves free-streaming high energy (∼500–1000 eV) D + and C +6 ions, with high near-surface plasma density. L-Mode sputtering is due to impurity sputtering (C, W) only, with lower density. All cases show complete redeposition of tungsten on the divertor, with significant redeposition on the tungsten spots themselves, and low self-sputtering. Comparison of ELM plasma gross tungsten erosion simulation results with in-situ spectroscopic data is good, as are code/data comparisons of net erosion using post-exposure Rutherford backscattering (RBS) data for the L-mode probes. The analysis, extrapolated to a full tungsten divertor, implies low net erosion and negligible plasma contamination from sputtering. These results support the use of high-Z plasma facing surfaces in ITER and beyond.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heisenberg model analysis on inelastic powder neutron scattering data using parent and K doped BaMn 2 As 2 samples

Low temperature powder inelastic neutron scattering measurements were performed on three different powder samples; parent BaMn 2 As 2 ,12.5% K-doped Ba 0.875 K 0.125 Mn 2 As 2 and 25% K-doped Ba (0.75) K 0.25 Mn 2 As 2 . The Heisenberg Model involving J 1 -J 2 -J z coupling constants were compared to the data by a powder integration routine using Monte Carlo integration methods. The best magnetic parameters were selected using a chi-square test where model intensities were compared to the full (q,E) dependence of magnetic scattering. A key step to this analysis is the characterization of the background which is formed mostly by phonon scattering intensities along with other sources including the magnetic impurity scattering events. The calculated powder magnetic intensities added to the estimated background obtained from the non-magnetic high momentum transfer region. The agreement between the simulated and the raw data enabled us to perform quantitative analysis of the unreacted MnO impurities. Overall, this is another confirmation along with earlier studies using this technique, that magnetic exchange constants can be calculated within an acceptable range with a very quick inelastic neutron powder experiment without need for a single crystal sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A MULTI-MODEL ANALYSIS OF POST-2020 MITIGATION EFFORTS OF FIVE MAJOR ECONOMIES

This paper looks into the regional mitigation strategies of five major economies (China, EU, India, Japan, and USA) in the context of the 2°C target, using a multi-model comparison. In order to stay in line with the 2°C target, a tripling or quadrupling of mitigation ambitions is required in all regions by 2050, employing vigorous decarbonization of the energy supply system and achieving negative emissions during the second half of the century. In all regions looked at, decarbonization of energy supply (and in particular power generation) is more important than reducing energy demand. Some differences in abatement strategies across the regions are projected: In India and the USA the emphasis is on prolonging fossil fuel use by coupling conventional technologies with carbon storage, whereas the other main strategy depicts a shift to carbon-neutral technologies with mostly renewables (China, EU) or nuclear power (Japan). Regions with access to large amounts of biomass, such as the USA, China, and the EU, can make a trade-off between energy related emissions and land related emissions, as the use of bioenergy can lead to a net increase in land use emissions. After supply-side changes, the most important abatement strategy focuses on end-use efficiency improvements, leading to considerable emission reductions in both the industry and transport sectors across all regions. Abatement strategies for non-CO2 emissions and land use emissions are found to have a smaller potential. Inherent model, as well as collective, biases have been observed affecting the regional response strategy or the available reduction potential in specific (end-use) sectors.

abatement↗

Hybrid Wing-Body (HWB) Pressurized Fuselage Modeling, Analysis, and Design for Weight Reduction

This paper describes the interim progress for an in-house study that is directed toward innovative structural analysis and design of next-generation advanced aircraft concepts, such as the Hybrid Wing-Body (HWB) and the Advanced Mobility Concept-X flight vehicles, for structural weight reduction and associated performance enhancement. Unlike the conventional, skin-stringer-frame construction for a cylindrical fuselage, the box-type pressurized fuselage panels in the HWB undergo significant deformation of the outer aerodynamic surfaces, which must be minimized without significant structural weight penalty. Simple beam and orthotropic plate theory is first considered for sizing, analytical verification, and possible equivalent-plate analysis with appropriate simplification. By designing advanced composite stiffened-shell configurations, significant weight reduction may be possible compared with the sandwich and ribbed-shell structural concepts that have been studied previously. The study involves independent analysis of the advanced composite structural concepts that are presently being developed by The Boeing Company for pressurized HWB flight vehicles. High-fidelity parametric finite-element models of test coupons, panels, and multibay fuselage sections, were developed for conducting design studies and identifying critical areas of potential failure. Interim results are discussed to assess the overall weight/strength advantages.

Mukhopadhyay, Vivek↗

Model analysis of thermal UV-cutoff effects on the chiral critical surface at finite temperature and chemical potential

We study the effects of temporal UV-cutoff on the chiral critical surface in hot and dense QCD using a chiral effective model. Recent lattice QCD simulations indicate that the curvature of the critical surface might change toward the direction in which the first-order phase transition becomes stronger on increasing the number of lattice sites. To investigate this effect on the critical surface in an effective model approach, we use the Nambu-Jona-Lasinio model with finite Matsubara frequency summation. We find that the nature of the curvature of the critical surface does not alter appreciably as we decrease the summation number, which is unlike the case that was observed in recent lattice QCD studies. This may suggest that the dependence of chemical potential on the coupling strength or some additional interacting terms such as vector interactions could play an important role at finite density.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗