Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimizing costs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Hydrogen production rate from comet Austin 1982g

Meaningful measurements with respect to the cometary Balmer-alpha (H-alpha) emission are difficult and require the use of special equipment. The first ground-based observations of H-alpha emission from a cometary hydrogen corona were conducted on comet Kohoutek 1973 XII with a large-aperture Fabry-Perot spectrometer installed at the McMath solar telescope at Kitt Peak National Observatory. The present investigation is concerned with the second ground-based observations of cometary H-alpha emission carried out during the apparition of comet Austin 1982g. A 150 mm dual-etalon Fabry-Perot spectrometer was employed in the experiment. Use was made of an observatory which is designed for the high spectral resolution study of faint extended sources such as interstellar and geocoronal emission lines. The investigation demonstrates that hydrogen production rates from comets as faint as about 7th magnitude can be routinely measured from the ground at minimal cost.

Shih, P.↗
NASA NTRS1983

A multi-item maintenance center inventory model for low-demand reparable items

In many military and commercial contexts, complex equipment undergoes scheduled maintenance overhauls at regular intervals during which all failed components are replaced. Failure to have replacements on hand for all failed parts requires emergency measures at premium cost. When reparable parts are highly reliable and expensive, both holding and shortage costs are high. This model determines the reparable parts inventory for a maintenance center under three alternative criteria: (1) maximizing job-completion rate subject to constraint on total holding costs, (2) minimizing total holding costs plus expected job noncompletion costs, and (3) minimizing total holding costs subject to a required minimum job-completion rate. Exact solutions may be obtained using dynamic programming. Approximate solutions, found easily by marginal analysis, have readily computed bounds on possible error. The solution methods for the three formulations are illustrated in a simple example.

Schaefer, M. K.↗
NASA NTRS1985

A Concept for a Mobile Remote Manipulator System

A conceptual design for a Mobile Remote Manipulator System (MRMS) is presented. This concept does not require continuous rails for mobility (only guide pins at truss hardpoints) and is very compact, being only one bay square. The MRMS proposed is highly maneuverable and is able to move in any direction along the orthogonal guide pin array under complete control at all times. The proposed concept would greatly enhance the safety and operational capabilities of astronauts performing EVA functions such as structural assembly, payload transport and attachment, space station maintenance, repair or modification, and future spacecraft construction or servicing. The MRMS drive system conceptual design presented is a reasonably simple mechanical device which can be designed to exhibit high reliability. Developmentally, all components of the proposed MRMS either exist or are considered to be completely state of the art designs requiring minimal development, features which should enhance reliability and minimize costs.

Mikulus, M. M., Jr.↗
NASA NTRS1982

Space station preliminary design report

The results of a 3 month preliminary design and analysis effort is presented. The configuration that emerged consists of a very stiff deployable truss structure with an overall triangular cross section having universal modules attached at the apexes. Sufficient analysis was performed to show feasibility of the configuration. An evaluation of the structure shows that desirable attributes of the configuration are: (1) the solar cells, radiators, and antennas will be mounted to stiff structure to minimize control problems during orbit maintenance and correction, docking, and attitude control; (2) large flat areas are available for mounting and servicing of equipment; (3) Large mass items can be mounted near the center of gravity of the system to minimize gravity gradient torques; (4) the trusses are lightweight structures and can be transported into orbit in one Shuttle flight; (5) the trusses are expandable and will require a minimum of EVA; and (6) the modules are anticipated to be structurally identical except for internal equipment to minimize cost.

Source record↗
NASA NTRS1985

Multiband selection with linear array detectors

Several techniques that can be used in an earth-imaging system to separate the linear image formed after the collecting optics into the desired spectral band are examined. The advantages and disadvantages of the Multispectral Linear Array (MLA) multiple optics, the MLA adjacent arrays, the imaging spectrometer, and the MLA beam splitter are discussed. The beam-splitter design approach utilizes, in addition to relatively broad spectral region separation, a movable Multiband Selection Device (MSD), placed between the exit ports of the beam splitter and a linear array detector, permitting many bands to be selected. The successful development and test of the MSD is described. The device demonstrated the capacity to provide a wide field of view, visible-to-near IR/short-wave IR and thermal IR capability, and a multiplicity of spectral bands and polarization measuring means, as well as a reasonable size and weight at minimal cost and risk compared to a spectrometer design approach.

Richard, H. L.↗
NASA NTRS1987

Approximate Feedback Control for a System With Memory

Report presents algorithm for calculating feedback gain for control of hereditary dynamical systems with control delay. Problem is to approximate optimal feedback gain that minimizes cost function of state and control. Theory applicable to design of controllers for mechanical systems subject to thermal deformation, electrical systems with delay, electrical systems with plasma components, and other systems that exhibit memory.

Milman, Mark H.↗
NASA NTRS1987

Advanced probabilistic method of development

Advanced structural reliability methods are utilized on the Probabilistic Structural Analysis Methods (PSAM) project to provide a tool for analysis and design of space propulsion system hardware. The role of the effort at the University of Arizona is to provide reliability technology support to this project. PSAM computer programs will provide a design tool for analyzing uncertainty associated with thermal and mechanical loading, material behavior, geometry, and the analysis methods used. Specifically, reliability methods are employed to perform sensitivity analyses, to establish the distribution of a critical response variable (e.g., stress, deflection), to perform reliability assessment, and ultimately to produce a design which will minimize cost and/or weight. Uncertainties in the design factors of space propulsion hardware are described by probability models constructed using statistical analysis of data. Statistical methods are employed to produce a probability model, i.e., a statistical synthesis or summary of each design variable in a format suitable for reliability analysis and ultimately, design decisions.

Wirsching, P. H.↗
NASA NTRS1986

Lunar settlements - A socio-economic outlook

Factors in the design and development of a lunar settlement (LS) which affect the performance of the crew members are discussed. Topics examined include LS-program time constraints imposed by decisions made in developing and operating the Space Station; changes to make allowance for the long-term requirements of LSs; the design of the physical, technical, and organic LS environment; and the vital role of group dynamics in assuring LS success. It is suggested that many short-term cost-minimization strategies employed in spacecraft development may be inappropriate for LS programs.

Bluth, B. J.↗
NASA NTRS1987

Advanced heavy lift launch vehicles

The performance requirements of advanced technology-incorporating, next-generation heavy lift launch vehicles (HLLVs) for LEO missions are discussed, and the configurational features facilitated by those technologies are evaluated. These 1990s 'cargo' vehicles will capitalize on advanced avionics, software and automation, novel hot structure and thermal insulation materials, and more powerful liquid-fuel rockets employing either hydrogen or hydrocarbons. The configurations considered include a winged booster. The use of Space Shuttle components is a major cost-minimization strategy in many of these HLLV design efforts.

Shelton, Billy W.↗
NASA NTRS1988

A strategy for reducing turnaround time in design optimization using a distributed computer system

There is a need to explore methods for reducing lengthly computer turnaround or clock time associated with engineering design problems. Different strategies can be employed to reduce this turnaround time. One strategy is to run validated analysis software on a network of existing smaller computers so that portions of the computation can be done in parallel. This paper focuses on the implementation of this method using two types of problems. The first type is a traditional structural design optimization problem, which is characterized by a simple data flow and a complicated analysis. The second type of problem uses an existing computer program designed to study multilevel optimization techniques. This problem is characterized by complicated data flow and a simple analysis. The paper shows that distributed computing can be a viable means for reducing computational turnaround time for engineering design problems that lend themselves to decomposition. Parallel computing can be accomplished with a minimal cost in terms of hardware and software.

Young, Katherine C.↗
NASA NTRS1988

Contamination control requirements document JSC 30426 recommended updates

Contamination control requirements for the Space Station have been evolving over the last few years. Workshops, comments by experimenters and continuing analysis have resulted in recommending changes to the November 19, 1986 version of Space Station External Contamination Control Requirements, JSC 30426. These are summarized and presented, so that the requirements can be revised as soon as possible, to minimize costly design impacts on the Space Station.

Rantanen, Ray↗
NASA NTRS1988

YAG aerosol lidar

The Global Atmospheric Backscatter Experiment (GLOBE) Mission, using the NASA DC-8 aircraft platform, is designed to provide the magnitude and statistical distribution of atmospheric backscatter cross section at lidar operating wavelengths. This is a fundamental parameter required for the Doppler lidar proposed to be used on a spacecraft platform for global wind field measurements. The prime measurements will be made by a CO2 lidar instrument in the 9 to 10 micron range. These measurements will be complemented with the Goddard YAG Aerosol Lidar (YAL) data in two wavelengths, 0.532 and 1.06 micron, in the visible and near-infrared. The YAL, is being designed to utilize as much existing hardware, as feasible, to minimize cost and reduce implementation time. The laser, energy monitor, telescope and detector package will be mounted on an optical breadboard. The optical breadboard is mounted through isolation mounts between two low boy racks. The detector package will utilize a photomultiplier tube for the 0.532 micron channel and a silicon avalanche photo detector (APD) for the 1.06 micron channel.

Sullivan, R.↗
NASA NTRS1988

Data base development and research and editorial support

The Life Sciences Bibliographic Data Base was created in 1981 and subsequently expanded. A systematic, professional system was developed to collect, organize, and disseminate information about scientific publications resulting from research. The data base consists of bibliographic information and hard copies of all research papers published by Life Sciences-supported investigators. Technical improvements were instituted in the database. To minimize costs, take advantage of advances in personal computer technology, and achieve maximum flexibility and control, the data base was transferred from the JSC computer to personal computers at George Washington University (GWU). GWU also performed a range of related activities such as conducting in-depth searches on a variety of subjects, retrieving scientific literature, preparing presentations, summarizing research progress, answering correspondence requiring reference support, and providing writing and editorial support.

Source record↗
NASA NTRS1990

Assignment Of Finite Elements To Parallel Processors

Elements assigned approximately optimally to subdomains. Mapping algorithm based on simulated-annealing concept used to minimize approximate time required to perform finite-element computation on hypercube computer or other network of parallel data processors. Mapping algorithm needed when shape of domain complicated or otherwise not obvious what allocation of elements to subdomains minimizes cost of computation.

Salama, Moktar A.↗
NASA NTRS1990

Design Of Robots For Outer Space

Report discusses design of robots for use in zero gravity and vacuum, with attention to differences between requirements imposed on designs by outer space and by terrestrial applications. Terrestrial robots designed for multiple purposes and for minimal cost. Outer-space robots designed specialized to one task where cost has relatively low priority. Design optimal in one environment unlikely optimal in another.

Roston, Gerald P.↗
NASA NTRS1990

Window Utility System Program

Window Utility System computer program provides full-featured screen-management windowing software facility incorporated easily into user application programs. Developed to provide more pleasing user interface for CLIPS, C-Language Integrated Production System expert-system-development shell program. Also used with many other application programs in VAX/VMS language. Provides pull-down menus and multiple window displays at minimal cost. Written in VAX C.

Cooper, Eric G.↗
NASA NTRS1990

An applicational process for dynamic balancing of turbomachinery shafting

The NASA Lewis Research Center has developed and implemented a time-efficient methodology for dynamically balancing turbomachinery shafting. This methodology minimizes costly facility downtime by using a balancing arbor (mandrel) that simulates the turbomachinery (rig) shafting. The need for precision dynamic balancing of turbomachinery shafting and for a dynamic balancing methodology is discussed in detail. Additionally, the inherent problems (and their causes and effects) associated with unbalanced turbomachinery shafting as a function of increasing shaft rotational speeds are discussed. Included are the design criteria concerning rotor weight differentials for rotors made of different materials that have similar parameters and shafting. The balancing methodology for applications where rotor replaceability is a requirement is also covered. This report is intended for use as a reference when designing, fabricating, and troubleshooting turbomachinery shafting.

Verhoff, Vincent G.↗
NASA NTRS1989

Local gravity disturbance estimation from multiple-high-single-low satellite-to-satellite tracking

The idea of satellite-to-satellite tracking in the high-low mode has received renewed attention in light of the uncertain future of NASA's proposed low-low mission, Geopotential Research Mission (GRM). The principal disadvantage with a high-low system is the increased time interval required to obtain global coverage since the intersatellite visibility is often obscured by Earth. The U.S. Air Force has begun to investigate high-low satellite-to-satellite tracking between the Global Positioning System (GPS) of satellites (high component) and NASA's Space Transportation System (STS), the shuttle (low component). Because the GPS satellites form, or will form, a constellation enabling continuous three-dimensional tracking of a low-altitude orbiter, there will be no data gaps due to lack of intervisibility. Furthermore, all three components of the gravitation vector are estimable at altitude, a given grid of which gives a stronger estimate of gravity on Earth's surface than a similar grid of line-of-sight gravitation components. The proposed Air Force mission is STAGE (Shuttle-GPS Tracking for Anomalous Gravitation Estimation) and is designed for local gravity field determinations since the shuttle will likely not achieve polar orbits. The motivation for STAGE was the feasibility to obtain reasonable accuracies with absolutely minimal cost. Instead of simulating drag-free orbits, STAGE uses direct measurements of the nongravitational forces obtained by an inertial package onboard the shuttle. The sort of accuracies that would be achievable from STAGE vis-a-vis other satellite tracking missions such as GRM and European Space Agency's POPSAT-GRM are analyzed.

Jekeli, Christopher↗