Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Microporous pentiptycene-based polybenzimidazole membranes for high temperature H 2 /CO 2 separation

Separating H 2 from syngas at elevated temperatures (100–250 °C) have attracted significant attention in recent years as a means to reduce energy consumption and capital costs in precombustion carbon capture processes, such as those following steam reforming of natural gas or coal gasification. Polybenzimidazole (PBI), particularly m-PBI, has been reported as a leading membrane material for high-temperature H 2 /CO 2 separation. However, m-PBI exhibits extremely low H 2 permeability, even at high temperatures, which limits its productivity in H 2 /CO 2 separation applications. Here, to address this limitation, this work introduces a new pentiptycene-based polybenzimidazole (PPBI) featuring significantly enhanced H 2 permeability and attractive high-temperature H 2 /CO 2 separation performance, which stems from the unique configurational free volume elements introduced by pentiptycene moieties. Further tuning of the free volume architecture of PPBI films is achieved via acid doping with phosphoric acid (PA) or trans-aconitic acid (TaA), which introduces crosslinking among PPBI chains. Under mixed-gas environment (50/50 mol% H 2 /CO 2 ) at 180 °C, the acid-doped PPBI films exhibit a ∼230 % increase in H 2 /CO 2 selectivity compared to pristine PPBI film while maintaining high H 2 permeability that is nearly 500 % of m-PBI. These properties approach the predicted upper bound for membrane operating at 180 °C, highlighting its great potential for high-temperature H 2 /CO 2 separation.

Liu, Mengdi [University of Notre Dame, IN (United ↗

Microporous and hollow carbon spheres derived from soft drinks: Promising CO 2 separation materials

In this work, we demonstrate that a simple hydrothermal treatment followed by pyrolysis of regular and diet soft drinks can generate well-defined carbon structures including solid and hollow spheres with a high degree of microporosity. These materials show high and selective CO 2 adsorption with a capacity up to 4.65 mmol g -1 at 0 °C and 1 bar depending on the particular soft drink used as the precursor. Isosteric heats of adsorption ranged from 22.3 kJ mol -1 to 29.2 kJ mol -1 which suggests a relatively low regeneration energy for ease of re-use. Carbon dioxide adsorption cycles were repeated for ten cycles with no loss of capacity confirming the reusability of the carbon. We also explore the effect of artificial sweeteners on the morphology and CO 2 interaction of the resulting carbon materials. These results show that waste soft drinks can be used to create high-value, porous carbon materials for applications such as carbon capture.

36 MATERIALS SCIENCE↗

Pure- and mixed-gas transport properties of a microporous Tröger's Base polymer (PIM-EA-TB)

Polymers of intrinsic microporosity (PIMs) offer tantalizing combinations of high selectivity and permeability in initial gas permeation measurements. Here, we report characterization of pure- and mixed-gas permeation properties of a thick (~80 μm) PIM consisting of Tröger's Base (TB) and Ethanoanthracene (EA) films. The effects of feed pressure and temperature on pure-gas permeabilities of CH 4 , N 2 , O 2 , H 2 , and CO 2 were investigated. The physical aging behavior of the thick film was tracked via pure-gas O 2 , N 2 , and CH 4 permeability at 35 °C. Gas permeability decreased noticeably and selectivity increased as aging time increased. Particular attention was given to mixed-gas measurements of CO 2 and CH 4 (50/50) permeabilities at 35 °C and fugacities ranging from 2 to 18 atm to explore whether the rigid, bridged, bicyclic TB and EA units could resist CO 2 -induced plasticization. These results are presented along with pure-gas CO 2 and CH 4 results for membrane samples aged at different times. PIM-EA-TB aged for ~24 h did not show signs of plasticization across the fugacity range considered. Furthermore, dual-mode competitive sorption presumably caused the CO 2 /CH 4 mixed-gas selectivity to be slightly higher than its corresponding pure-gas selectivity. However, as aging time increased, aged films underwent progressively more rapid and extensive CO 2 -induced plasticization with increasing fugacity, suggesting a systematic relationship between physical aging and plasticization in PIMs. Consequently, physical aging caused less improvement in mixed-gas CO 2 /CH 4 selectivity than it did in pure-gas selectivity, due mainly to plasticization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diverse Lanthanide Coordination and Selective Ion Exchange in the Microporous Selenites Na 4 Ln 4 (SeO 3 ) 7 O· n H 2 O (Ln = Gd, Tb, Dy, Ho, Er, Tm, and Yb)

Seven isomorphous alkali metal lanthanide selenites, Na 4 Ln 4 (SeO 3 ) 7 O·nH 2 O (Ln = Gd, Tb, Dy, Ho, Er, Tm, and Yb), exhibiting a new structure type, have been prepared by hydrothermal methods. The four crystallographically unique Ln 3+ cations within the structure exhibit three different coordination environments that are best described as bicapped trigonal prisms, trigonal dodecahedra, and pentagonal bipyramids. These polyhedra edge- and corner-share to yield diamond-shaped channels that extend along the a axis and are approximately 8.4 Å × 10.5 Å. These channels house alkali metal cations and disordered water molecules. Here, the Ho-analog was chosen for ion-exchange studies that indicate that the Na + cations in the channels can be selectively exchanged for Rb + , but ion exchange with other monovalent cations does not occur.

Cations↗

Synthesis, Structure, and Selective Gas Adsorption of a Single-Crystalline Zirconium Based Microporous Metal–Organic Framework

Porous metal-organic framework (MOF) materials with high thermal and water stability are desirable for various adsorption based applications. Early transition metal based MOFs such as those built on zirconium metal have been well recognized for their excellent stability toward heat and/or moisture. However, the difficulty growing large single crystals makes their structural characterization challenging. Herein we report a porous Zr-MOF, [Zr 6 O 4 (OH) 4 (cca) 6 ] (Zr-cca), which is assembled from zirconium and 4-carboxycinnamic acid (H 2 cca) under solvothermal conditions. Single crystal X-ray diffraction analysis reveals that the structure of Zr-cca is isoreticular to the prototype zirconium based MOF, UiO-66. Zr-cca shows permanent porosity upon removal of solvent molecules initially residing inside the pores, with a BET surface area of 1178 m 2 /g. As expected, it exhibits good thermal stability (stable up to 400 °C) and high resistance to acidity over a wide pH range. Evaluation of its gas adsorption performance on various hydrocarbons and fluorocarbons indicates that it preferentially adsorbs C 3 and C 4 hydrocarbons over C 2 analogues. At 30°C Zr-cca takes up more than 50 wt % of perfluorohexane and the adsorption-desorption process is fully recyclable. We have compared this material with UiO-66 and studied the underlying reasons for the difference in their adsorption performance toward perfluorohexane.

36 MATERIALS SCIENCE↗

Solid 3D Li–S Battery Design via Stacking 2D Conductive Microporous Coordination Polymers and Amorphous Li–S Layers

To make a lithium-sulfur (Li-S) battery practical, not only high gravimetric energy capacity is important, but also high volumetric energy capacity will be required. The currently explored Li-S cathode designs often deploy systems with liquid electrolyte infiltration, hence with relatively low volumetric capacity. In the current study, we theoretically test a compact solid three-dimensional (3D) design (more like a Li-ion battery cathode than a conventional Li-S cathode) consisted of a sandwich structure alternating between the two-dimensional (2D) Mn-hexaaminobenzene-based coordination polymer (2D Mn-HAB-CP) layer and the amorphous Li-S layer. We study the theoretical limits for both its gravimetric and volumetric energy capacity, as well as its structural stability and Li diffusion within the cathode system. To study the Li diffusion within an amorphous system, we also develop a pull-atom molecular dynamics (PA-MD) to calculate the barrier heights of such disordered systems. We reveal the mechanism that determines the Li diffusion in the amorphous layer of the system. Overall, we find such a 3D solid Li-S cathode can be practical, with sufficient large gravimetric and volumetric energy capacity, as well as the Li diffusion constant. It also solves many other common Li-S cathode problems, from Li polysulfide dissolution to electrical insulating, and structure instabilities.

25 ENERGY STORAGE↗

Selective Carbon Dioxide Adsorption by Two Robust Microporous Coordination Polymers

In the present work we report the design, synthesis, crystal structure determination, and adsorption properties of two new cadmium-based porous coordination polymers, [Cd(pda) 0.5 (spiro-4-py) 0.5 (HCOO)]•2H 2 O•DMF (compound 1, pda = p-phenylenediacetate, spiro- 4-py = (2,2’,7,7’-tetra(pyridin-4-yl)-9,9’-spirobi[fluorene], DMF = N,N’-dimethylformamide) and [Cd 2 (pda)(spiro-4-py)(CH 3 COO) 2 ]•DMA (compound 2, DMA = N,N’-dimethylacetamide) with similar structures. The coordination between cadmium and two organic linkers, pda and spiro-4-py, has yielded two-dimensional frameworks with rhombic openings. Stacking of these two-dimensional networks does not block the openings but rather results in permanent porosity with one-dimensional channels in the final structures. The permanent porosity of these compounds is confirmed by gas adsorption measurements. Compounds 1 and 2 have BET (Brunauer-Emmett-Teller) surface areas of 687 and 584 m 2 /g, respectively. Both compounds show favorable adsorption towards carbon dioxide over other light gases such as nitrogen, oxygen, and carbon monoxide. IAST (Ideal adsorbed solution theory) is employed to predict the adsorption selectivity of binary gas mixtures. Though compounds 1 and 2 possess similar structures, differences are observed in their gas adsorption behaviors, which can be attributed to their different terminal ligands of formate and acetate, respectively. Strikingly, both compounds show exceptionally high stability in aqueous media with a wide pH range, a characteristic that is highly desirable for gas separation-related applications. The robustness of these structures suggests that the use of hydrophobic spiro based multipyridine ligands can lead to water stable frameworks built on late-transition metals that are otherwise sensitive to moisture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correction to Selective Carbon Dioxide Adsorption by Two Robust Microporous Coordination Polymers

In the present work we report the design, synthesis, crystal structure determination, and adsorption properties of two new cadmium-based porous coordination polymers, [Cd(pda)0.5(spiro-4-py)0.5(HCOO)]•2H2O•DMF (compound 1, pda = p-phenylenediacetate, spiro- 4-py = (2,2’,7,7’-tetra(pyridin-4-yl)-9,9’-spirobi[fluorene], DMF = N,N’-dimethylformamide) and [Cd2(pda)(spiro-4-py)(CH3COO)2]•DMA (compound 2, DMA = N,N’-dimethylacetamide) with similar structures. The coordination between cadmium and two organic linkers, pda and spiro-4-py, has yielded two-dimensional frameworks with rhombic openings. Stacking of these two-dimensional networks does not block the openings but rather results in permanent porosity with one-dimensional channels in the final structures. The permanent porosity of these compounds is confirmed by gas adsorption measurements. Compounds 1 and 2 have BET (Brunauer-Emmett-Teller) surface areas of 687 and 584 m 2 /g, respectively. Both compounds show favorable adsorption towards carbon dioxide over other light gases such as nitrogen, oxygen, and carbon monoxide. IAST (Ideal adsorbed solution theory) is employed to predict the adsorption selectivity of binary gas mixtures. Though compounds 1 and 2 possess similar structures, differences are observed in their gas adsorption behaviors, which can be attributed to their different terminal ligands of formate and acetate, respectively. Strikingly, both compounds show exceptionally high stability in aqueous media with a wide pH range, a characteristic that is highly desirable for gas separation-related applications. The robustness of these structures suggests that the use of hydrophobic spiro based multipyridine ligands can lead to water stable frameworks built on late-transition metals that are otherwise sensitive to moisture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗