Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lens”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A Gas Giant Planet in the OGLE-2006-BLG-284L Stellar Binary System

We present the analysis of microlensing event OGLE-2006-BLG-284, which has a lens system that consists of two stars and a gas giant planet with a mass ratio of q {sub p} = (1.26 ± 0.19) × 10{sup −3} to the primary. The mass ratio of the two stars is q {sub s} = 0.289 ± 0.011, and their projected separation is s {sub s} = 2.1 ± 0.7 au, while the projected separation of the planet from the primary is s {sub p} = 2.2 ± 0.8 au. For this lens system to have stable orbits, the three-dimensional separation of either the primary and secondary stars or the planet and primary star must be much larger than the projected separations. Since we do not know which is the case, the system could include either a circumbinary or a circumstellar planet. Because there is no measurement of the microlensing parallax effect or lens system brightness, we can only make a rough Bayesian estimate of the lens system masses and brightness. We find host star and planet masses of M{sub L1}=0.35{sub −0.20}{sup +0.30} M{sub ⊙}, M{sub L2}=0.10{sub −0.06}{sup +0.09} M{sub ⊙}, and m{sub p}=144{sub −82}{sup +126} M{sub ⊕}, and the K-band magnitude of the combined brightness of the host stars is K{sub L}=19.7{sub −1.0}{sup +0.7}. The separation between the lens and source system will be ∼90 mas in mid-2020, so it should be possible to detect the host system with follow-up adaptive optics or Hubble Space Telescope observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

3D-Printed mmWave Quasi-Holographic Antenna for 2-D Beamforming

This paper presents the design and manufacturing of a novel 2D-scanning antenna that integrates a 3D-printed Rotman lens with a quasi-holographic leaky-wave antenna (HLWA). The proposed design achieved beam-scanning capabilities by leveraging the beamforming of the Rotman lens and the high-gain directive properties of the quasi-HLWA. The Rotman lens (RL) enables beam steering in the elevation plane by switching between input ports. The quasi-HLWA, designed using holographic principles, achieves frequency-controlled beam scanning in the azimuth plane. The entire antenna structure was fabricated using additive manufacturing with an Ink1092 substrate and silver ink for the conductive traces. This approach provides greater control over material placement and design freedom compared to traditional methods. A 25° transmission linear substrate taper was used to ensure good impedance matching between the Rotman lens and the quasi-HLWA, allowing greater gain while maintaining a good scanning range. The experimental results validate the 2D scanning capability of the proposed antenna. The antenna system provides coverage from −54° to 54° in the elevation θ plane and −28° to 28° in the azimuth plane ϕ , with a maximum measured gain of 21.3 dBi at 28 GHz with an average radiation efficiency η=60 %. The fabricated prototype was tested, and the performance was in good agreement with the simulated performance.

Rotman lens↗
DOE OSTI2024

High-Density Polyethylene Custom Focusing Lenses for High-Resolution Transient Terahertz Biomedical Imaging Sensors

Transient terahertz time-domain spectroscopy (THz-TDS) imaging has emerged as a novel non-ionizing and noninvasive biomedical imaging modality, designed for the detection and characterization of a variety of tissue malignancies due to their high signal-to-noise ratio and submillimeter resolution. We report our design of a pair of aspheric focusing lenses using a commercially available lens-design software that resulted in about 200 × 200-μm2 focal spot size corresponding to the 1-THz frequency. The lenses are made of high-density polyethylene (HDPE) obtained using a lathe fabrication and are integrated into a THz-TDS system that includes low-temperature GaAs photoconductive antennae as both a THz emitter and detector. The system is used to generate high-resolution, two-dimensional (2D) images of formalin-fixed, paraffin-embedded murine pancreas tissue blocks. The performance of these focusing lenses is compared to the older system based on a pair of short-focal-length, hemispherical polytetrafluoroethylene (TeflonTM) lenses and is characterized using THz-domain measurements, resulting in 2D maps of the tissue refractive index and absorption coefficient as imaging markers. For a quantitative evaluation of the lens effect on the image resolution, we formulated a lateral resolution parameter, R2080, defined as the distance required for a 20–80% transition of the imaging marker from the bare paraffin region to the tissue region in the same image frame. The R2080 parameter clearly demonstrates the advantage of the HDPE lenses over TeflonTM lenses. The lens-design approach presented here can be successfully implemented in other THz-TDS setups with known THz emitter and detector specifications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Collimated phase measuring deflectometry II: Re-design of the optical layout for high-curvature surfaces

Collimated phase measuring deflectometry (CPMD) is an optical metrology technique developed to improve upon traditional phase measuring deflectometry (PMD). CPMD utilizes telecentric imaging and collimated structured light illumination to eliminate the height-slope ambiguity present in traditional PMD measurements. After the publication of the first CPMD paper, efforts began to optimize the optical layout of the CPMD system. The first proposed change, and the one detailed in this work, was to move the Fourier transform (FT) lens closer to the surface under test (SUT). Moving the FT lens closer to the SUT meant that for a given FT lens diameter, a larger range of surface slopes on the SUT could be measured. This change to the optical layout was not trivial and introduced at least two concerns that had to be addressed: telecentricity in the imaging path and possible ghost reflections from the re-located FT lens. Here, in this work, we examine how these concerns were addressed and present results showing that the revised optical layout is capable of measurement results at least as good as the original CPMD optical layout. We also demonstrate the increased slope measuring range of the revised optical layout.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Dynamic Focusing with High-Quality-Factor Metalenses

Metasurface lenses provide an ultrathin platform in which to focus light, but weak light–matter interactions limit their dynamic tunability. Here we design submicron-thick, ultrahigh quality factor (high-Q) metalenses that enable dynamic modulation of the focal length and intensity. Using full-field simulations, we show that quality factors exceeding 5000 can be generated by including subtle, periodic perturbations within the constituent Si nanoantennas. Such high-Q resonances enable lens modulation based on the nonlinear Kerr effect, with focal lengths varying from 4 to 6.5 μm and focal intensities decreasing by half as input intensity increases from 0.1 to 1 mW/μm 2 . We also show how multiple high-Q resonances can be embedded in the lens response through judicious placement of the perturbations. Our high-Q lens design, with quality factors 2 orders of magnitude higher than existing lens designs, provides a foundation for reconfigurable, multiplexed, and hyperspectral metasurface imaging platforms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

TDCOSMO. VII. Boxyness/discyness in lensing galaxies: Detectability and impact on H 0

In the context of gravitational lensing, the density profile of lensing galaxies is often considered to be perfectly elliptical. Potential angular structures are generally ignored, except to explain flux ratios of point-like sources (i.e. flux ratio anomalies). Surprisingly, the impact of azimuthal structures on extended images of the source has not been characterised, nor has its impact on the H 0 inference. We address this task by creating mock images of a point source embedded in an extended source and lensed by an elliptical galaxy on which multipolar components are added to emulate boxy or discy isodensity contours. Modelling such images with a density profile free of angular structure allows us to explore the detectability of image deformation induced by the multipoles in the residual frame. Multipole deformations are almost always detectable for our highest signal-to-noise ratio (S/N) mock data. However, the detectability depends on the lens ellipticity and Einstein radius, on the S/N of the data, and on the specific lens modelling strategy. Multipoles also introduce small changes to the time-delays. We therefore quantify how undetected multipoles would impact H 0 inference. When no multipoles are detected in the residuals, the impact on H 0 for a given lens is in general less than a few k ms -1 Mpc -1 , but in the worst-case scenario, combining low S/N in the ring and large intrinsic boxyness or discyness, the bias on H0 can reach 10-12 km s -1 Mpc -1 . If we now look at the inference on H 0 from a population of lensing galaxies with a distribution of multipoles representative of what is found in the light profile of elliptical galaxies, we find a systematic bias on H 0 of less than 1%. A comparison of our mock systems to the state-of-the-art time-delay lens sample studied by the H0LiCOW and TDCOSMO collaborations indicates that multipoles are currently unlikely to be a source of substantial systematic bias on the inferred value of H 0 from time-delay lenses.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

High- z Universe probed via Lensing by QSOs (HULQ)

Galaxies and their central supermassive black holes are known to coevolve, but the physical background for this is unknown as of yet. The High-z Universe probed via Lensing by QSOs (HULQ) project aims to investigate this coevolution by using quasi-stellar object (QSO) host galaxies acting as gravitational lenses (QSO lenses). We present the results of the spectroscopic observation of the first QSO lens candidate from the HULQ project, HULQ J0002+0239, which consists of a QSO host galaxy at z d = 1.455 and four seemingly lensed objects in a cross-like configuration. Deep optical spectra of two of the possibly lensed objects with z ~ 24.5 mag were obtained with the Gemini Multi-Object Spectrograph on the Gemini North Telescope. Their spectra reveal that the objects are newly discovered galaxies at z = 0.29 and z = 1.11, and we conclude that HULQ J0002+0239 is not a QSO lens. Our QSO lens search results are so far in agreement with the predicted number of QSO lenses, and we discuss how the future investigation of additional QSO lens candidates could tell us more about the evolution of the black hole mass and host galaxy scaling relations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Hubble Asteroid Hunter

Context: The Hubble Space Telescope (HST) archives constitute a rich dataset of high-resolution images to mine for strong gravitational lenses. While many HST programmes specifically target strong lenses, they can also be present by coincidence in other HST observations. Aims: Our aim is to identify non-targeted strong gravitational lenses, without any prior selection on the lens properties, in almost two decades of images from the ESA HST archive (eHST). Methods: We used crowdsourcing on the Hubble Asteroid Hunter (HAH) citizen science project to identify strong lenses, along with asteroid trails, in publicly available large field-of-view HST images. We visually inspected 2354 objects tagged by citizen scientists as strong lenses to clean the sample and identify the genuine lenses. Results: We report the detection of 252 strong gravitational lens candidates, which were not the primary targets of the HST observations. A total of 198 of them are new, not previously reported by other studies, consisting of 45 A grades, 74 B grades and 79 C grades. The majority are galaxy-galaxy configurations. The newly detected lenses are, on average, 1.3 magnitudes fainter than previous HST searches. This sample of strong lenses with high-resolution HST imaging is ideal to follow up with spectroscopy for lens modelling and scientific analyses. Conclusions: This paper presents the unbiased search of lenses that enabled us to find a wide variety of lens configurations, including exotic lenses. We demonstrate the power of crowdsourcing in visually identifying strong lenses and the benefits of exploring large archival datasets. This study shows the potential of using crowdsourcing in combination with artificial intelligence for the detection and validation of strong lenses in future large-scale surveys such as ESA’s Euclid mission or in James Webb Space Telescope (JWST) archival images.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Transitioning from Stage-III to Stage-IV: cosmology from galaxy×CMB lensing and shear×CMB lensing

ABSTRACT We examine the cosmological constraining power from two cross-correlation probes between galaxy and cosmic microwave background (CMB) surveys: the cross-correlation of lens galaxy density with CMB lensing convergence 〈δgκCMB〉, and source galaxy weak lensing shear with CMB lensing convergence 〈γκCMB〉. These two cross-correlation probes provide an independent cross-check of other large-scale structure constraints and are insensitive to galaxy-only or CMB-only systematic effects. In addition, when combined with other large-scale structure probes, the cross-correlations can break degeneracies in cosmological and nuisance parameters, improving both the precision and robustness of the analysis. In this work, we study how the constraining power of 〈δgκCMB〉 + 〈γκCMB〉 changes from Stage-III (ongoing) to Stage-IV (future) surveys. Given the flexibility in selecting the lens galaxy sample, we also explore systematically the impact on cosmological constraints when we vary the redshift range and magnitude limit of the lens galaxies using mock galaxy catalogs. We find that in our setup, the contribution to cosmological constraints from 〈δgκCMB〉 and 〈γκCMB〉 are comparable in the Stage-III data sets; but in Stage-IV surveys, the noise in 〈δgκCMB〉 becomes subdominant to cosmic variance, preventing 〈δgκCMB〉 to further improve the constraints. This implies that to maximize the cosmological constraints from future 〈δgκCMB〉 + 〈γκCMB〉 analyses, we should focus more on the requirements on 〈γκCMB〉 instead of 〈δgκCMB〉. Furthermore, the selection of the lens sample should be optimized in terms of our ability to characterize its redshift or galaxy bias instead of its number density.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Substructure detection reanalysed: dark perturber shown to be a line-of-sight halo

ABSTRACT Observations of structure at subgalactic scales are crucial for probing the properties of dark matter, which is the dominant source of gravity in the universe. It will become increasingly important for future surveys to distinguish between line-of-sight haloes and subhalos to avoid wrong inferences on the nature of dark matter. We reanalyse a subgalactic structure (in lens JVAS B1938 + 666) that has been previously found using the gravitational imaging technique in galaxy-galaxy lensing systems. This structure has been assumed to be a satellite in the halo of the main lens galaxy. We fit the redshift of the perturber of the system as a free parameter, using the multiplane thin-lens approximation, and find that the redshift of the perturber is $z_\mathrm{int} = 1.42^{+0.10}_{-0.15}$ (with a main lens redshift of z = 0.881). Our analysis indicates that this structure is more massive than the previous result by an order of magnitude. This constitutes the first dark perturber shown to be a line-of-sight halo with a gravitational lensing method.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

STRIDES: automated uniform models for 30 quadruply imaged quasars

ABSTRACT Gravitational time delays provide a powerful one-step measurement of H0, independent of all other probes. One key ingredient in time-delay cosmography are high-accuracy lens models. Those are currently expensive to obtain, both, in terms of computing and investigator time (105–106 CPU hours and ∼0.5–1 yr, respectively). Major improvements in modelling speed are therefore necessary to exploit the large number of lenses that are forecast to be discovered over the current decade. In order to bypass this roadblock, we develop an automated modelling pipeline and apply it to a sample of 31 lens systems, observed by the Hubble Space Telescope in multiple bands. Our automated pipeline can derive models for 30/31 lenses with few hours of human time and <100 CPU hours of computing time for a typical system. For each lens, we provide measurements of key parameters and predictions of magnification as well as time delays for the multiple images. We characterize the cosmography-readiness of our models using the stability of differences in the Fermat potential (proportional to time delay) with respect to modelling choices. We find that for 10/30 lenses, our models are cosmography or nearly cosmography grade (<3 per cent and 3–5 per cent variations). For 6/30 lenses, the models are close to cosmography grade (5–10 per cent). These results utilize informative priors and will need to be confirmed by further analysis. However, they are also likely to improve by extending the pipeline modelling sequence and options. In conclusion, we show that uniform cosmography grade modelling of large strong lens samples is within reach.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The impact of human expert visual inspection on the discovery of strong gravitational lenses

We investigate the ability of human ‘expert’ classifiers to identify strong gravitational lens candidates in Dark Energy Survey like imaging. We recruited a total of 55 people that completed more than 25 percent of the project. During the classification task, we present to the participants 1489 images. The sample contains a variety of data including lens simulations, real lenses, non-lens examples, and unlabelled data. We find that experts are extremely good at finding bright, well-resolved Einstein rings, while arcs with g-band signal to noise less than ~25 or Einstein radii less than ~1.2 times the seeing are rarely recovered. Very few non-lenses are scored highly. There is substantial variation in the performance of individual classifiers, but they do not appear to depend on the classifier’s experience, confidence or academic position. These variations can be mitigated with a team of 6 or more independent classifiers. Our results give confidence that humans are a reliable pruning step for lens candidates, providing pure and quantifiably complete samples for follow-up studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

On the detectability of strong lensing in near-infrared surveys

We present new lensing frequency estimates for existing and forthcoming deep near-infrared surveys, including those from JWST and VISTA. The estimates are based on the JAdes extragalactic Ultradeep Artificial Realisations (JAGUAR) galaxy catalogue accounting for the full photometry and morphologies for each galaxy. Due to the limited area of the JAGUAR simulations, they are less suited to wide-area surveys; however, we also present extrapolations to the surveys carried out by Euclid and the Nancy Grace Roman Space Telescope. The methodology does not make assumptions about the nature of the lens itself and probes a wide range of lens masses. The lenses and sources are selected from the same catalogue and extend the analysis from the visible bands into the near-infrared. After generating realistic simulated lensed sources and selecting those that are detectable with SNR > 20, we verify the lensing frequency expectations against published lens samples selected in the visible, finding them to be broadly consistent. We find that JWST could yield ~65 lensed systems in COSMOS-Web, of which ~25 per cent have source redshifts >4. Deeper, narrower programs (e.g. JADES-Medium) will probe more typical source galaxies (in flux and mass) but will find fewer systems (~25). Of the surveys we investigate, we find 55–80 per cent have detectable multiple imaging. Forthcoming NIR surveys will likely reveal new and diverse strong lens systems including lensed sources that are at higher redshift (JWST) and dustier, more massive and older (Euclid NISP) than those typically detected in the corresponding visible surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Dark Energy Survey Year 3 results: Exploiting small-scale information with lensing shear ratios

Using the first three years of data from the Dark Energy Survey (DES), we use ratios of small-scale galaxy-galaxy lensing measurements around the same lens sample to constrain source redshift uncertainties, intrinsic alignments and other systematics or nuisance parameters of our model. Instead of using a simple geometric approach for the ratios as has been done in the past, we use the full modeling of the galaxy-galaxy lensing measurements, including the corresponding integration over the power spectrum and the contributions from intrinsic alignments and lens magnification. We perform extensive testing of the small-scale shear-ratio (SR) modeling by studying the impact of different effects such as the inclusion of baryonic physics, nonlinear biasing, halo occupation distribution descriptions and lens magnification, among others, and using realistic N -body simulations of the DES data. We validate the robustness of our constraints in the data by using two independent lens samples with different galaxy properties, and by deriving constraints using the corresponding large-scale ratios for which the modeling is simpler. The results applied to the DES Y3 data demonstrate how the ratios provide significant improvements in constraining power for several nuisance parameters in our model, especially on source redshift calibration and intrinsic alignments. For source redshifts, SR improves the constraints from the prior by up to 38% in some redshift bins. Such improvements, and especially the constraints it provides on intrinsic alignments, translate to tighter cosmological constraints when shear ratios are combined with cosmic shear and other 2pt functions. In particular, for the DES Y3 data, SR improves S 8 constraints from cosmic shear by up to 31%, and for the full combination of probes ( 3 × 2 pt ) by up to 10%. The shear ratios presented in this work are used as an additional likelihood for cosmic shear, 2 × 2 pt and the full 3 × 2 pt in the fiducial DES Y3 cosmological analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Thermal compensation of molded silicone optics

Optical grade silicone has various properties that make it attractive for solar concentrators, such as excellent transmission across the solar spectrum and flexible moldability for freeform profiles. In this study, a glass–silicone lens structure is proposed to reduce the optothermal effect on the silicone lens. Experimental measurements and simulation modeling results demonstrate that the focal length sensitivity of the glass–silicone lens with respect to temperature can be reduced by a factor of 10 when compared to a silicone lens alone. This model has been extended to the simulation of a proposed two-stage silicone solar concentrator, consisting of an array of acylindrical lenslets and rows of waveguides that focus light onto microphotovoltaic cells. The optical efficiency of the solar concentration system showed a change of less than 10% compared to the efficiency at room temperature for temperature changes from − <#comment/> 10 ∘ <#comment/> C to 70°C.

Lyons, Nicholas P.↗
DOE OSTI2025

Robust COTS objective for diffraction-limited, high-NA, long front working distance imaging

We present a robust objective lens optimized for applications requiring both high numerical aperture (NA) and long front working distance imaging, comprised of all commercial-off-the-shelf (COTS) spherical singlet lenses. Unlike traditional designs that require separate collimation and refocusing stages, our approach directly converges imaged light to the back focal plane using a single lens group. Our configuration corrects spherical aberrations and efficiently collects light to achieve diffraction-limited performance across a wide range of wavelengths while simplifying alignment and assembly. Using this approach, we design and construct an example objective lens that features a long front working distance of 61 mm and a clipped NA of 0.30 (limited by an aperture in our experimental setup). We experimentally verify that it achieves monochromatic diffraction-limited resolution at wavelengths from 375 nm to 866 nm without requiring replacement of the lenses or changing the inter-lens spacings, and its performance remains robust across a 46 mm range variation in total length (by adjusting mainly the back working distance). Additionally, we develop a quantitative method to measure the field of view (FOV) using an experimentally calibrated pinhole target. Under 397 nm illumination (i.e., from 40 Ca + ion fluorescence), the objective achieves a resolution of 0.87 μm with a 540 μm FOV. This robust, all-COTS, and versatile design is well-suited for a broad range of experiments, supporting high-precision measurements and exploring quantum phenomena.

Cui, Jiafeng [Oak Ridge National Laboratory (ORNL)↗
DOE OSTI2020

Plasma Photonics for the Control of Kilojoule Lasers

The main goal of this project was to develop plasma photonic devices (plasma lenses or ellipsoidal plasma mirrors (EPMs)) for controlling the focus of high-energy (kJ-class) laser systems. In order to defocus a kJclass laser beam, a plasma optic must produce a very specific plasma density profile. For a plasma lens, this profile must be peaked on axis and fall off parabolicly with radius. We developed four plasma-lens target designs that were predicted to yield the ideal plasma profile required for defocusing kJ-class laser beams. Particle-in-cell (PIC) simulations using the code OSIRIS were used to explore the design. The resulting plasma lens must also be underdense, which sets an upper limit on the solid density of the plasma-lens targets to ~ 1 mg/cm 3 or less. This low of a density is highly challenging to fabricate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Transitioning from Stage-III to Stage-IV: Cosmology from galaxy×CMB lensing and shear×CMB lensing (Final Report for Grant SC0021429 "Cosomology with Galaxy and CMB Surveys: Mitigating Systematic Effects Through Combining Datasets")

We examine the cosmological constraining power from two cross-correlation probes between galaxy and cosmic microwave background (CMB) surveys: the cross-correlation of lens galaxy density with CMB lensing convergence $\langle δ_g$$^κ\text{CMB}\rangle$, and source galaxy weak lensing shear with CMB lensing convergence $\langle^{γκ}$$_{\text{CMB}}\rangle$. These two cross-correlation probes provide an independent cross-check of other large-scale structure constraints and are insensitive to galaxy-only or CMB-only systematic effects. In addition, when combined with other large-scale structure probes, the cross-correlations can break degeneracies in cosmological and nuisance parameters, improving both the precision and robustness of the analysis. In this work, we study how the constraining power of $\langle δ_g$$^κ\text{CMB}\rangle + \langle^{γκ}$$_{\text{CMB}}\rangle$ changes from Stage-III (ongoing) to Stage-IV (future) surveys. Given the flexibility in selecting the lens galaxy sample, we also explore systematically the impact on cosmological constraints when we vary the redshift range and magnitude limit of the lens galaxies using mock galaxy catalogs. We find that in our setup, the contribution to cosmological constraints from $\langle δ_g$$^κ\text{CMB}\rangle$ and $\langle^{γκ}$$_{\text{CMB}}\rangle$ are comparable in the Stage-III data sets; but in Stage-IV surveys, the noise in$\langle δ_g$$^κ\text{CMB}\rangle$ becomes subdominant to cosmic variance, preventing $\langle δ_g$$^κ\text{CMB}\rangle$ to further improve the constraints. This implies that to maximize the cosmological constraints from future $\langle δ_g$$^κ\text{CMB}\rangle$ + $\langle^{γκ}$$_{\text{CMB}}\rangle$ analyses, we should focus more on the requirements on$^{γκ}$$_{\text{CMB}}\rangle$ instead of$\langle δ_g$$^κ\text{CMB}\rangle$. Furthermore, the selection of the lens sample should be optimized in terms of our ability to characterize its redshift or galaxy bias instead of its number density.

79 ASTRONOMY AND ASTROPHYSICS↗