Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lake”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Microbiome controls on harmful algal toxin production in Lake Erie (Final Project Report)

Lawrence Livermore National Laboratory (LLNL) funded this project with the aim to understand how the microbiome influences the toxicity of harmful algal blooms in Lake Erie. Dr. Xavier Mayali from LLNL led the project. Dr. Dragan Isailovic led University of Toledo portion of the project also involving Dr. Thomas Bridgeman, and Dr. Gregory Dick led the portion of the project at the University of Michigan with Dr. Jenan Kharbush.

54 ENVIRONMENTAL SCIENCES↗

Hydraulic Testing of the Lost Lake Aquifer Near Recovery Wells RWM 6 and RWM 7

Hydrologic tests were conducted on the Lost Lake Aquifer Zone (LLAZ) at recovery wells RWM 6 and RWM 7 in accordance with the approved test plan (Dixon, 2023). The objective of the testing was to determine well performance parameters of RWM 6 and aquifer hydraulic properties near RWM 6 and RWM 7. Tests at RWM 6 consisted of a step-drawdown test to determine well performance parameters, a constant rate pump test to determine aquifer hydraulic properties, and an aquifer recovery test also used to determine aquifer hydraulic properties. Well performance parameters determined included specific capacity, well efficiency, and head loss coefficients. Prior to testing at RWM 6, a constant rate pump test was conducted at RWM 7. Data from this testing was used to determine aquifer hydraulic properties near RWM 7.

42 ENGINEERING↗

The Feasibility of Incorporating a 3D Velocity Model Into Earthquake Location Around Salt Lake City, UT Using a Physics Informed Neural Network

Earthquake location algorithms typically require travel time calculation. Doing this calculation in 3D, despite advances in algorithm efficiency and computational power, can still be prohibitively expensive in terms of resources and storage. Implementation of high-resolution 3D models in routine earthquake location would be a significant step forward in most of the world. Machine learning algorithms have potential to act as substitutes for travel time calculation algorithms or stored travel time tables. We investigate EikoNet - a physics informed neural network machine learning model that estimates travel times very quickly and comes with negligible memory-overhead. Specifically, we apply EikoNet to the Wasatch Fault Community Velocity Model (WFCVM), a highly detailed and complex 3D velocity model of the Salt Lake City, UT region. While routine locations in the area and studies of the 2020 Magna, UT earthquake sequence used a 1D velocity model, a 3D model may help better our understanding the structure of the major fault in the region. Our primary goal was to test the speed, memory requirements, and accuracy of EikoNet compared to a reference eikonal solver. We find that while the EikoNet is exceedingly fast and requires little memory overhead, achieving acceptable accuracy in estimated travel times is difficult and requires extensive computational resources.

58 GEOSCIENCES↗

Characterizing Bioavailable Soil Nutrients Across Coastal Systems: Western Lake Erie and Chesapeake Bay

Terrestrial Aquatic Interfaces (TAIs), defined as where land meets water, exhibit important hydrological, biological, and biogeochemical dynamics and play a critical role in the Earth’s carbon cycle. Current Earth System Models improperly represent this role due to the complexity of these systems and the disproportionally large impact TAIs have relative to their area. To improve our predictive capacity of coastal system dynamics, a better understanding of carbon and nutrient cycling across TAI’s is needed. Coastal Observations, Mechanisms, and Predictions Across Systems and Scales (COMPASS) aims to achieve this through field observations and laboratory incubations throughout the Western Lake Erie and Chesapeake Bay regions. Here, we report on preliminary results from a soil characterization experiment across the WLE and CB regions. This experiment was conducted as part of the 2-year field, measurements, and experiments (FME) pilot study portion of COMPASS to provide initial baseline data for the sites and to characterize the spatial variability of our analytes. Soil samples were collected from three locations along the TAI transect (upland forest, transitional forest, and wetland) and analyzed for bioavailable nutrients using three types of extractions: (a) water extractions, (b) 2M KCl extractions, and (c) 1M NH4Cl extractions to analyze (a) water soluble organic carbon (WSOC), (b) ammonium and nitrate, and (c) base cations, including Ca, Mg, Na, K, and Fe. These analyses, in conjunction with other bulk physicochemical analyses, will help establish baseline understanding of these sites to drive future research and design focused experiments that will ultimately improve our predictive understanding of these freshwater and marine coastal TAIs and their response to short and long-term changes.

54 ENVIRONMENTAL SCIENCES↗

An Extension Industrial Assessment Center in Eastern Great Lakes Region

The extension IAC at CWRU is funded for 3 years to conduct 10 assessments of small and medium-sized manufacturing facilities each year in Eastern Great Lakes region. Total 30 assessments was proposed in the SOPO but due to the Covid-19 pandemic, the IAC program was suspended for 1.5 years. A total of 20 assessments was contracted to the extension IAC at CWRU which have been successfully accomplished. In the proposal, we proposed to train 18 students in the extension IAC program, and actually we selected and trained 19 students even though the IAC project was suspended during half of its project period.

42 ENGINEERING↗

Hydraulic Testing of the Lost Lake Aquifer Near Recovery Well RWM001R

An aquifer pumping test was conducted on the Lost Lake Aquifer Zone (LLAZ) at the recently installed recovery well RWM001R in accordance with the approved test plan (Dixon, 2024). The objective of the testing was to determine baseline well performance parameters and aquifer hydraulic conductivity. This testing consisted of two step-drawdown tests to determine well performance properties and two constant pumping rate aquifer tests with recovery periods to determine aquifer hydraulic properties. Well performance parameters determined included specific capacity, well efficiency, and head loss coefficients. The results of the step-drawdown testing are presented in Tables ES1 and ES2 whereas the results of the constant pumping rate testing are presented in Table ES3. The average specific capacity of RWM001R operating at pump capacity (~54 gpm) was 2.2 gpm/ft using data from the final step of both tests. The average well efficiency determined from both step-drawdown tests was 56% using data from the final step of both tests. For both step-drawdown tests, well efficiency was inversely related to the pumping rate with the average efficiency decreasing from approximately 79% to 56%. Aquifer head loss coefficients from both tests were comparable (Table ES2).

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Data Lake Design for the Accelerator Control System

In this modern world, the user expects faster processing and real-time response to operate accelerator control devices. The existing framework with its infrastructure does not have the ability to satisfy these future needs. Therefore, modernization is required to reach industry standards and develop a modular framework that can provide flexibility and dynamic scalability. The data lake architecture, comprising three layers, ingestion, processing, and data consumption, provides flexibility and scalability to meet current and future demands for the accelerator control system.

Jaikar, Amol [Fermilab]↗

Floating Solar at Lima's Twin Lakes Reservoir

The City of Lima, Ohio is developing a floating photovoltaic (FPV) facility on the surface of Twin Lake Reservoir, adjacent to the City’s water treatment plant. The FPV array is designed with a capacity of 2 megawatts (MW) and will consist of approximately 3,500 solar panels spanning more than four acres of water surface. Based on regional solar conditions, the system will generate 2,000 megawatt-hours (MWh) of electricity annually. While the FPV system will interconnect to the electrical infrastructure serving the water treatment plant, power produced by the system will be net-metered through the utility grid, with energy credits applied to offset the plant’s overall electrical demand rather than directly supplying all plant loads in real time.

14 SOLAR ENERGY↗

SPRUCE S1 Bog and Bog Lake Fen Moss Decomposition and Litter Chemistry Data, 2014-2019

This dataset includes measurements of mass loss, decay rate, and litter chemistry of mosses decomposing in the S1 Bog and Bog Lake Fen located in the USDA Forest Service Marcell Experimental Forest (MEF) in northern Minnesota, 40 km north of Grand Rapids. A litterbag experiment was used to estimate decay rates of 3 different moss types (Sphagnum magellanicum, Sphagnum angustifolium/fallax, and Polytrichum sp.) from mass loss measurements after one and five years in hummock and hollow microtopographies in the bog and lawn microtopography in the poor fen. Carbon, nitrogen, and phosphorous contents of the mosses were measured initially, after 1 year, and after 5 years of decay. Sample collection and analyses started in 2014 and was completed in 2019 (2014-06-05 to 2019-06-05). These data are from outside the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental plots. Decomposition data (rates and chemistry changes) can be used to assess ecosystem carbon and nutrient cycles. These data were used in analyses reported in Shelley et al (2022). This dataset contains two data files in comma-separate values (*.csv) format. Additional metadata are provided: two data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗

Genomic profiles of four novel cyanobacteria MAGs from Lake Vanda, Antarctica: insights into photosynthesis, cold tolerance, and the circadian clock

Cyanobacteria in polar environments face environmental challenges, including cold temperatures and extreme light seasonality with small diurnal variation, which has implications for polar circadian clocks. However, polar cyanobacteria remain underrepresented in available genomic data, and there are limited opportunities to study their genetic adaptations to these challenges. This paper presents four new Antarctic cyanobacteria metagenome-assembled genomes (MAGs) from microbial mats in Lake Vanda in the McMurdo Dry Valleys in Antarctica. The four MAGs were classified as Leptolyngbya sp. BulkMat.35, Pseudanabaenaceae cyanobacterium MP8IB2.15, Microcoleus sp. MP8IB2.171, and Leptolyngbyaceae cyanobacterium MP9P1.79. The MAGs contain 2.76 Mbp – 6.07 Mbp, and the bin completion ranges from 74.2–92.57%. Furthermore, the four cyanobacteria MAGs have average nucleotide identities (ANIs) under 90% with each other and under 77% with six existing polar cyanobacteria MAGs and genomes. This suggests that they are novel cyanobacteria and demonstrates that polar cyanobacteria genomes are underrepresented in reference databases and there is continued need for genome sequencing of polar cyanobacteria. Analyses of the four novel and six existing polar cyanobacteria MAGs and genomes demonstrate they have genes coding for various cold tolerance mechanisms and most standard circadian rhythm genes with the Leptolyngbya sp. BulkMat.35 and Leptolyngbyaceae cyanobacterium MP9P1.79 contained kaiB3, a divergent homolog of kaiB.

59 BASIC BIOLOGICAL SCIENCES↗