Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “k mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Data from: Comparing traditional and Bayesian approaches to ecological meta-analysis

Despite the wide application of meta-analysis in ecology, some of the traditional methods used for meta-analysis may not perform well given the type of data characteristic of ecological meta-analyses. We reviewed published meta-analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies (ni) and the number of studies or records (k) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta-analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that ni and k were highly variable, distributions were right-skewed, and were generally small (median ni =5, median k=44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval based on the t-distribution that uses an adjusted standard error (the Hartung-Knapp-Sidik-Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z-distribution confidence intervals had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta-analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random-effects meta-analysis, the performance of the best frequentist and Bayesian methods were similar for the same combinations of factors (k and mean replication), though the Bayesian approaches had higher than nominal (>95%) coverage for the mean effect when k was very low (k<15). Our literature review suggests that many meta-analyses that used z-distribution or bootstrapping confidence intervals may have over-estimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta-analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Comparing traditional and Bayesian approaches to ecological meta‐analysis

Abstract Despite the wide application of meta‐analysis in ecology, some of the traditional methods used for meta‐analysis may not perform well given the type of data characteristic of ecological meta‐analyses. We reviewed published meta‐analyses on the ecological impacts of global climate change, evaluating the number of replicates used in the primary studies ( n i ) and the number of studies or records ( k ) that were aggregated to calculate a mean effect size. We used the results of the review in a simulation experiment to assess the performance of conventional frequentist and Bayesian meta‐analysis methods for estimating a mean effect size and its uncertainty interval. Our literature review showed that n i and k were highly variable, distributions were right‐skewed and were generally small (median n i = 5, median k = 44). Our simulations show that the choice of method for calculating uncertainty intervals was critical for obtaining appropriate coverage (close to the nominal value of 0.95). When k was low (<40), 95% coverage was achieved by a confidence interval (CI) based on the t distribution that uses an adjusted standard error (the Hartung–Knapp–Sidik–Jonkman, HKSJ), or by a Bayesian credible interval, whereas bootstrap or z distribution CIs had lower coverage. Despite the importance of the method to calculate the uncertainty interval, 39% of the meta‐analyses reviewed did not report the method used, and of the 61% that did, 94% used a potentially problematic method, which may be a consequence of software defaults. In general, for a simple random‐effects meta‐analysis, the performance of the best frequentist and Bayesian methods was similar for the same combinations of factors ( k and mean replication), though the Bayesian approach had higher than nominal (>95%) coverage for the mean effect when k was very low ( k < 15). Our literature review suggests that many meta‐analyses that used z distribution or bootstrapping CIs may have overestimated the statistical significance of their results when the number of studies was low; more appropriate methods need to be adopted in ecological meta‐analyses.

Pappalardo, Paula↗
DOE OSTI2024

Material Characterization Study of Magnetite Nanocrystals for RF Sensing

Magnetite nanocrystals show promise for electrically small gigahertz frequency applications, which could lead to miniaturizing transformer cores and new sensing technologies. This work presents a rigorous radiofrequency characterization of these nanocrystals using vector network analyzer (VNA) ferromagnetic resonance (FMR) measurements. For the first time, two different average diameters of Fe 3 O 4 nanocrystals are investigated (7.3 and 20.2 nm). When the VNA–FMR results were compared to micromagnetic simulations, the magnetic anisotropy (K 1 ) deviated from the ideal mean orientation value of K 1 /2 to K 1 /80 for the 7.3 nm nanocrystal. In contrast, the obtained magnetic anisotropy in 20.2 nm nanocrystals slightly deviated to K 1 /11 due to less structural deformations. These findings resulted in a newly proposed methodology for an approximate simulation based on VNA–FMR measurements. In addition, this work estimates the approximate amount of nanocrystals needed to measure a useful VNA–FMR spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

$K^{*}(892)^0$ meson production in inelastic p+p interactions at 40 and 80 $\text{ GeV }\!/\!c$ beam momenta measured by NA61/SHINE at the CERN SPS

Measurements of $K^{*}(892)^0$ resonance production via its $K^{+}\pi ^{-}$ decay mode in inelastic p+p collisions at beam momenta 40 and 80 $\text{ GeV }\!/\!c$ ($\sqrt{s_{NN}}=8.8$ and 12.3 $\text{ GeV }$) are presented. The data were recorded by the NA61/SHINE hadron spectrometer at the CERN Super Proton Synchrotron. The template method was used to extract the $K^{*}(892)^0$ signal. Transverse momentum and rapidity spectra were obtained. The mean multiplicities of $K^{*}(892)^0$ mesons were found to be $(35.1 \pm 1.3 \mathrm {(stat)} \pm 3.6 \mathrm {(sys))} \cdot 10^{-3}$ at 40 $\text{ GeV }\!/\!c$ and $(58.3 \pm 1.9 \mathrm {(stat)} \pm 4.9 \mathrm {(sys))} \cdot 10^{-3}$ at 80 $\text{ GeV }\!/\!c$. The NA61/SHINE results are compared with the Epos1.99 and Hadron Resonance Gas models as well as with world data. The transverse mass spectra of $K^{*}(892)^0$ mesons and other particles previously reported by NA61/SHINE were fitted within the Blast-Wave model. The transverse flow velocities are close to 0.1–0.2 of the speed of light and are significantly smaller than the ones determined in heavy nucleus-nucleus interactions at the same beam momenta.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Integrated GW Farm ABM

This Data Repository includes data used for the integrated groundwater- farm ABM model, raw model output from scenario ensemble, and processed outputs that isolate the groundwater storage depletion outcomes for the 35,000 farm cells. Model Inputs: Farm ABM Inputs: This folder contains the input data used by the integrated groundwater - farm ABM modelling script (Python file) used for the high performance computing (HPC) experiments. The sub-folder "data inputs" contains all of the farm attribute data, while the three files in the folder have the hydrogeological data lookup table (NLDAS Cost Curve Attributes.csv), a lookup table (Theis well function table.csv) for the groundwater cost curve function, and the farm indexes and corresponding NLDAS ids for all of the cells run in this experiment (nldas farms subset final.csv). NLDAS Cost curve hydrogeological data: Hydrogeological data aggregated to 1/8 degree resolution and aligned with the NLDAS grid. Parameters include: water depth below ground surface [meters], subsurface porosity [unitless], aquifer depth from ground surface to aquifer bottom [meters], annual average recharge (USGS: mm, Doll: meters), and three different hydraulic conductivity (K) values (meters/day). The three K values represent the mean value from Gleeson et al. (2018), one standard deviation above the mean from Gleeson et al. (2018), and the de Graaf et al. 2020 modifications to certain lithologies. Additional information about these datasets and their processing are documented in the supplement to Yoon et al. 2025 (in review). Output: Raw outputs: This folder contains a .zip file that has model outputs for the entire scenario ensemble. There is one csv for each farm id, using the format "farm farmid cases.csv". The relationship between the farm id and NLDAS id is defined by the "nldas farms subset final.csv" located in the Farm ABM Inputs folder. Each csv has 625 rows, corresponding to 625 combinations of different scenario parameter values. Each row (scenario) represents the outcome of a 100 year simulation. Columns define scenario settings and summary statistics for each scenario. The first four columns define the scenario settings: "hydro ratio," "econ ratio," "K scenario," and "gamma scenario." The hydro and econ ratios are values passed to the modeling script that influence multipliers for other model parameters, as documented in the supplement to Yoon et al. 2025 (in review). The gamma multiplier is a coefficient multiplier applied to the baseline gamma values (values below 1 represent lower unobserved costs compared to baseline, values above 1 represent higher costs). The K scenario names represent K values of: "low": 0.5 m/d, "int 1": 2.5 m/d, "int 2": 10 m/d, "high": 50 m/d, and "gleeson": mean Gleeson K value. "Perc vol depleted" is the fraction of groundwater depleted at the end of the 100 simulation. Processed Output: Derived depletion outcomes from raw outputs: All of the individual csv files from the Raw outputs were aggregated into a single file that has the scenario settings and fraction depletion "Perc vol depleted" for every farm cell, for every scenario. The other two files define relationships between the farm id, NLDAS id, and local and major aquifer units, used for aquifer-level depletion analysis.

Agent based modeling↗
DOE OSTI2025

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗
DOE OSTI2020

K*(892) 0 meson production in inelastic p+p interactions at 158 GeV/ c beam momentum measured by NA61/SHINEat the CERN SPS

The measurement of Κ*(892) 0 resonance production via its Κ⁺π⁻ decay mode in inelastic p+p collisions at beam momentum 158 Ge V/c (√ S ΝΝ = 17.3 Ge V) is presented. The data were recorded by the NA61/SHINE hadron spectrometer at the CERN Super Proton Synchrotron. The template method was used to extract the K*(892) 0 signal and double-differential transverse momentum and rapidity spectra were obtained. The full phase-space mean multiplicity of K*(892) 0 mesons was found to be (78.44 ± 0.38(stat) ± 6.0(sys)) ∙ 10 -3 . The NA61/SHINE results are compared with the EPOS1.99 and Hadron Resonance Gas models as well as with world data from p+p and nucleus-nucleus collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

$K^0_S$ meson production in inelastic p+p interactions at 31, 40 and 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ beam momentum measured by NA61$/$SHINE at the CERN SPS

The yields of $K^0_S$ mesons have been measured in inelastic p+p interactions at incident projectile momenta of 31, 40 and 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ ($\sqrt{s_{NN}}=7.7, 8.8$ and 12.3 $\text {Ge}\hspace{-1.00006pt}\text {V}$, respectively). The data were recorded by the NA61$/$SHINE spectrometer at the CERN Super Proton Synchrotron and the $K^0_S$ mesons identified via their decays into $\pi ^{+} \pi ^{-}$ pairs. Double-differential distributions are presented as function of transverse momentum and rapidity. The mean multiplicities of $K^0_S$ mesons were determined to be $(5.95 \pm 0.19 (stat) \pm 0.30 (sys)) \times 10^{-2}$ at 31 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$, $(7.61 \pm 0.13 (stat) \pm 0.43 (sys)) \times 10^{-2}$ at 40 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$ and $(11.58 \pm 0.12 (stat) \pm 0.55 (sys)) \times 10^{-2}$ at 80 $\text {Ge}\hspace{-1.00006pt}\text {V}\!/\!c$. The results on $K^{0}_{S}$ production are compared with the production of charged kaons in corresponding reactions and with model calculations (Epos1.99, SMASH 2.0 and PHSD) as well as with published data from other experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Identifying the sources of uncertainty in climate model simulations of solar radiation modification with the G6sulfur and G6solar Geoengineering Model Intercomparison Project (GeoMIP) simulations

We present here results from the Geoengineering Model Intercomparison Project (GeoMIP) simulations for the experiments G6sulfur and G6solar for six Earth system models participating in the Climate Model Intercomparison Project (CMIP) Phase 6. The aim of the experiments is to reduce the warming that results from a high-tier emission scenario (Shared Socioeconomic Pathways SSP5-8.5) to that resulting from a medium-tier emission scenario (SSP2-4.5). These simulations aim to analyze the response of climate models to a reduction in incoming surface radiation as a means to reduce global surface temperatures, and they do so either by simulating a stratospheric sulfate aerosol layer or, in a more idealized way, through a uniform reduction in the solar constant in the model. We find that over the final two decades of this century there are considerable inter-model spreads in the needed injection amounts of sulfate (29 ± 9 Tg-SO 2 /yr between 2081 and 2100), in the latitudinal distribution of the aerosol cloud and in the stratospheric temperature changes resulting from the added aerosol layer. Even in the simpler G6solar experiment, there is a spread in the needed solar dimming to achieve the same global temperature target (1.91 ± 0.44 %). The analyzed models already show significant differences in the response to the increasing CO 2 concentrations for global mean temperatures and global mean precipitation (2.05 K ± 0.42 K and 2.28 ± 0.80 %, respectively, for SSP5-8.5 minus SSP2-4.5 averaged over 2081–2100). With aerosol injection, the differences in how the aerosols spread further change some of the underlying uncertainties, such as the global mean precipitation response (–3.79 ± 0.76 % for G6sulfur compared to –2.07 ± 0.40 % for G6solar against SSP2-4.5 between 2081 and 2100). These differences in the behavior of the aerosols also result in a larger uncertainty in the regional surface temperature response among models in the case of the G6sulfur simulations, suggesting the need to devise various, more specific experiments to single out and resolve particular sources of uncertainty. The spread in the modeled response suggests that a degree of caution is necessary when using these results for assessing specific impacts of geoengineering in various aspects of the Earth system. However, all models agree that compared to a scenario with unmitigated warming, stratospheric aerosol geoengineering has the potential to both globally and locally reduce the increase in surface temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Quantum-cascade-laser-absorption-spectroscopy diagnostic for temperature, pressure, and NO X 2 Π 1/2 at 500 kHz in shock-heated air at elevated pressures

The design, validation, and application of a quantum-cascade-laser-absorption-spectroscopy diagnostic for measuring gas temperature, pressure, and nitric oxide (NO) in high-temperature air are presented. A distributed-feedback quantum-cascade laser (QCL) centered near 1976 c m − <#comment/> 1 was used to scan across two transitions of NO in its ground electronic state ( X 2 Π <#comment/> 1 / 2 ). A measurement rate of 500 kHz was achieved using a single QCL by: (1) performing current modulation through a bias-tee, and (2) targeting closely spaced transitions with a large difference in lower-state energy. The diagnostic was validated in a mixture of 95% argon and 5% NO, which was shock-heated to ≈ <#comment/> 2000 to 3700 K. The average mean percent differences between laser-absorption-spectroscopy (LAS) measurements and predictions from shock-jump relations for temperature, pressure, and NO mole fraction were 3.1%, 4.1%, and 6.5%, respectively. The diagnostic was then applied to characterize shock-heated air at high temperatures (up to ≈ <#comment/> 5500 K ) and high pressures (up to 12 atm) behind either incident or reflected shocks. The LAS measurements were compared to theoretical predictions from shock-jump relations, pressure sensors mounted in the wall of the shock tube, and equilibrium values of the NO mole fraction. The average mean percent differences between LAS measurements and their aforementioned reference values were 3.2%, 10.8%, and 10.4% for temperature, pressure, and NO mole fraction, respectively. Last, a comparison between a measured NO mole fraction time history and a time-stepped homogeneous reactor simulation performed using two different chemical kinetics mechanisms is presented.

Gilvey, Jonathan J. (ORCID:0000000317664383)↗
DOE OSTI2022

$K^{0}_{S}$ meson production in inelastic p+p interactions at 158 $\text{ GeV }/c$ beam momentum measured by NA61/SHINE at the CERN SPS

The production of $K^{0}_{S}$ mesons in inelastic p+p collisions at beam momentum 158 $\text{ GeV }/c$ ($\sqrt{s_{NN}}=17.3$ $\text{ GeV }$) was measured with the NA61/SHINE spectrometer at the CERN Super Proton Synchrotron. Double-differential distributions were obtained in transverse momentum and rapidity. The mean multiplicity of $K^{0}_{S}$ was determined to be $0.162 \pm 0.001 (stat.) \pm 0.011 (sys.)$. The results on $K^{0}_{S}$ production are compared with model predictions (EPOS 1.99, SMASH 2.0, PHSD and UrQMD 3.4 models) as well as with published world data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Unstable turbulent channel flow response to spanwise-heterogeneous heat fluxes: Prandtl's secondary flow of the third kind

Turbulent secondary flows are defined as Prandtl's secondary flow of the first or second kind, the former produced by stretching and/or tilting of vorticity, the latter produced via spatial heterogeneity of Reynolds stresses. Both mechanisms are instantaneously active within inertia-dominated wall turbulence; Reynolds stress spatial heterogeneity is required for Reynolds-averaged secondary flows. Spanwise-variable surface roughness can induce turbulent stress spatial heterogeneity in the spanwise–wall-normal plane and provide sustenance for streamwise-aligned mean secondary flows. Herein, we demonstrate that turbulent secondary flows can also be sustained by spanwise variability in the surface heat flux in unstably stratified turbulent channels, defined hereafter as Prandtl's secondary flow of the third kind. Support for this mechanism is established with scaling arguments, while large-eddy simulation is used to model inertia-dominated channel turbulence responding to a lower boundary with uniform aerodynamic/hydrodynamic roughness but spanwise-variable surface heat flux. Transport equations for streamwise vorticity and turbulent kinetic energy, k, outline the conditions needed for third-kind production: shear and buoyancy production over the elevated heat flux regions necessitates lateral entrainment of low- k fluid, inducing mean counter-rotating secondary cells aligned such that upwelling and downwelling occur over the high and low heat flux regions, respectively. Buoyancy-driven production of k alters aggregate flow response and thus is a distinctly different mechanism responsible for sustenance of secondary flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Explainable machine learning reveals that local structural motifs encode the thermodynamic state across the CuZr metallic glass-forming range

Metallic glasses derive their properties from the statistics of local atomic motifs rather than from long-range order, yet a quantitative, chemistry-specific link between motif populations and the underlying glassy state has remained elusive. In this work we combine large-scale molecular dynamics, Voronoi tessellation, deep neural networks, and SHapley Additive exPlanations (SHAP) to identify which local structural motifs define the glassy state of Cu—Zr metallic glasses. A dataset of 17,180 atomistic configurations spanning ten compositions (Cu 20 Zr 80 –Cu 80 Zr 20 ) and four quench rates (10 9 –10 12 K/s) is used to train a feed-forward neural network that regresses temperature across the 50–2000 K liquid–supercooled–glass range, achieving a mean absolute error of 19.89 K and R 2 = 0.9974, confirming that the local structural state is faithfully encoded in motif-level structure. SHAP analysis then reveals that a tightly coupled near-icosahedral family of motifs (coordination numbers (CN) 11–13, including the full icosahedron 001200 and its single-atom-perturbation sibling 10930) collectively encodes the thermodynamic state of the system across the full glass-forming range. The CN = 11–13 ordered members carry negative SHAP values at high populations, tracking the most deeply-quenched configurations, while 10930 shows the reversed signature consistent with its role as a soft-spot host whose population shrinks as the icosahedral network deepens. The analysis demonstrates that explainable machine learning can isolate the minimal motif vocabulary defining the glassy state and recovers the near-icosahedral building blocks previously identified by data-driven analyses of Cu—Zr. The approach provides a general, chemistry-specific route for characterizing the structural state of disordered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Molecular dynamics study of interstitial He clusters in nickel

This study presents a molecular dynamics analysis focusing on the behavior of interstitial helium (He) clusters in nickel (Ni), examining their formation, stability, and migration energetics. Consistent with previous research, we found that the binding energies of interstitial helium within a helium cluster are positive and increase with the cluster size, indicating a preference for helium atoms to cluster together. However, our findings also reveal that while the formation energy increases monotonically with cluster size, the increase in binding energy is non-monotonic. Importantly, small He clusters were observed to be thermally unstable at reactor operational temperatures (approximately 600 K), with the He 2 cluster exhibiting instability even at room temperature. With a binding energy of 0.49 eV for a He 4 cluster, we hypothesize that for helium bubbles to form via homogeneous nucleation (i.e., through trap mutation) at reactor operating temperatures, the helium concentration must be high enough to facilitate the formation of helium clusters of at least size 4 or larger. As expected, interstitial helium and small helium clusters are highly mobile. This mobility was observed not only at room temperature but also at temperatures as low as approximately 200 K. Furthermore, the mean squared displacement method has been utilized to determine the migration barriers and the corresponding prefactors for clusters ranging from He 1 to He 6

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Observation of stacking engineered magnetic phase transitions within moiré supercells of twisted van der Waals magnets

Abstract Recent demonstrations of moiré magnetism, featuring exotic phases with noncollinear spin order in the twisted van der Waals (vdW) magnet chromium triiodide CrI 3 , have highlighted the potential of twist engineering of magnetic (vdW) materials. However, the local magnetic interactions, spin dynamics, and magnetic phase transitions within and across individual moiré supercells remain elusive. Taking advantage of a scanning single-spin magnetometry platform, here we report observation of two distinct magnetic phase transitions with separate critical temperatures within a moiré supercell of small-angle twisted double trilayer CrI 3 . By measuring temperature-dependent spin fluctuations at the coexisting ferromagnetic and antiferromagnetic regions in twisted CrI 3 , we explicitly show that the Curie temperature of the ferromagnetic state is higher than the Néel temperature of the antiferromagnetic one by ~10 K. Our mean-field calculations attribute such a spatial and thermodynamic phase separation to the stacking order modulated interlayer exchange coupling at the twisted interface of moiré superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dissipation in the magnetic turbulence of reversed field pinch plasmas

Reversed field pinch plasmas are subject to tearing instability that creates a broad spectrum of magnetic fluctuations. The dominant fluctuations have poloidal and toroidal mode numbers (m,n) = (1,6 - 10) and can grow to 2 - 3% of the mean magnetic field. Through non-linear coupling this growth culminates in a strong reconnection event and broadening of the magnetic spectrum extending to the ion gyroradius scale. Multiple developments occur during the reconnection stage: ions and electrons are energized, magnetic fluctuation amplitudes increase, plasma flow is halted, and the toroidal magnetic flux increases in a sawtooth-like fashion as the RFP dynamo becomes stronger. Magnetic fluctuations are measured in the plasma edge at multiple radial locations from r/a = 0.75 to 0.96 to assess and characterize the magnetic turbulence. The measured spectrum perpendicular to the mean field, S(k ⊥ ), can be fit to a model spectrum consisting of power law and exponential component with one free parameter that characterizes dissipation. The measured dissipation is much larger than estimated from classical viscous or resistive dissipation, but it is consistent with a flow damping measurement of anomalous viscosity. The measurements show an evolution of the spectrum during which fluctuation power builds up in the smallest wavenumbers and cascades to the larger wavenumber due to the non-linear coupling between the linear (m,n) = (1, > 6) and the non-linear (m,n) = (0, 1) tearing mo

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Multi-Scale Modeling Framework for Mercury Biogeochemistry

Multi-Scale modeling of mercury (Hg) geochemical speciation and reactions has been performed by integrating atomistic quantum chemical calculations with continuum scale speciation models. Major progress has been made in the improvement of quantum chemical models to calculate critical thermodynamic data for Hg complexes in aquatic environments. Rapid and reliable quantum chemical approaches have been developed for calculating acid dissociation constants (pK a ) and stability constants (log K), with calculated mean unsigned errors of 0.5 and 1.5 log units, respectively for ligand molecules and Hg complexes. At the continuum scale, systematic analysis of uncertainty propagation in mercury (Hg) speciation modeling has been conducted and was used to identify environmental conditions under which thermodynamic constant uncertainties are significant and recommended to be accounted for. The integrated framework for multi-scale modeling of mercury geochemistry is open to the research community through the web-based multiscale modeling aqueous speciation resource, AQUA-MER. The improved quantum chemical approaches for thermodynamic constant calculations are accessible through AQUA-MER and can be used to provide the missing constants in the continuum scale speciation calculations. In addition to low molecular mass Hg complex speciation, modeling natural aquatic environments also involve the transport of high molecular weight dissolved organic matter (DOM) in reactive flows simultaneously with equilibrium and kinetic reactions. To this end, atomistic MD simulations were performed to capture the details of aggregation, mechanisms and distribution of functional groups in DOM at the molecular level. The elemental composition and calculated bulk properties of the DOM models are in close agreement with experimental measurements. A travel-time based reactive transport model in the hyporheic zone of stream corridors was established for the multicomponent Hg-DOM-S system and implemented through PFLOTRAN.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A STUDY OF SHORT-RANGE CORRELATED PAIR FORMATION MECHANISMS

Short-Range Correlations (SRCs) refers to pairs of nucleons that are temporary high density fluctuations with high relative momenta and lower center-of-mass momenta com pared to the nuclear Fermi momentum (kF). SRCs account for 20–25% of the nucleons in medium to heavy nuclei, make up essentially all nucleons with momentum greater than kF, and contribute most of the kinetic energy carried by nucleons in nuclei. The existing semi-inclusive and exclusive measurements only cover a handful of light nu clei or heavy elements. This does not allow for a systematic study of the dependence of SRC pairs on nuclear mass and proton-neutron asymmetry. It also does not allow for insights into SRC pairing mechanisms. Therefore, we systematically studied the individual probabilities for finding SRC protons in symmetric and neutron-rich asymmetric nuclei d, 9Be, 10B, 11B, 12C, 40Ca, 48Ca, 54Fe, and 197Au. We measured the (e,e'p) reaction in kinematics dominated by scattering off mean-field nucleons (k = kF) and nucleons in SRC pairs (k = kF) at the Thomas Jefferson National Accelerator Facility (JLab) in Hall C of the Continuous Electron Beam Accelerator Facility (CEBAF) in the Fall of 2022. The measured results were used to determine the SRC pairing probabilities for protons to examine how pairing depends on nuclear mass, proton-neutron asymmetry, and nuclear shell structure. The extracted cross-section ratios were also compared to theoretical calculations. We found that SRC pair formation depends more on the nuclear shell structure with sharp increases locally within the general trend of a slower increase with larger A. We also found that intra-shell pairing has a much larger influence than inter-shell pairing. Comparisons to theory suggest that angular momentum selection rules are important to SRC pair formation and can provide new constraints for new theoretical models.

Swan, Noah [Old Dominion Univ., Norfolk, VA (Unite↗