Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

PLIF Study of Mars Science Laboratory Capsule Reaction Control System Jets

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to visualize the flow in the wake of a Mars Science Lab (MSL) entry capsule with activated reaction control system (RCS) jets in NASA Langley Research Center's 31-Inch Mach 10 Air Tunnel facility. Images were processed using the Virtual Diagnostics Interface (ViDI) method, which brings out the three-dimensional nature of the flow visualization data while showing the relative location of the data with respect to the model. Comparison of wind-on and wind-off results illustrates the effect that the hypersonic crossflow has on the trajectory and structure of individual RCS jets. The visualization and comparison of both single and multiple activated RCS jets indicate low levels of jet-jet interaction. Quantitative streamwise velocity was also obtained via NO PLIF molecular tagging velocimetry (MTV).

Johansen, C. T.↗
NASA NTRS2014

Toward Automatic Verification of Goal-Oriented Flow Simulations

We demonstrate the power of adaptive mesh refinement with adjoint-based error estimates in verification of simulations governed by the steady Euler equations. The flow equations are discretized using a finite volume scheme on a Cartesian mesh with cut cells at the wall boundaries. The discretization error in selected simulation outputs is estimated using the method of adjoint-weighted residuals. Practical aspects of the implementation are emphasized, particularly in the formulation of the refinement criterion and the mesh adaptation strategy. Following a thorough code verification example, we demonstrate simulation verification of two- and three-dimensional problems. These involve an airfoil performance database, a pressure signature of a body in supersonic flow and a launch abort with strong jet interactions. The results show reliable estimates and automatic control of discretization error in all simulations at an affordable computational cost. Moreover, the approach remains effective even when theoretical assumptions, e.g., steady-state and solution smoothness, are relaxed.

Simulations↗
NASA NTRS2016

A Proposed Ascent Abort Flight Test for the Max Launch Abort System

The NASA Engineering and Safety Center initiated the Max Launch Abort System (MLAS) Project to investigate alternate crew escape system concepts that eliminate the conventional launch escape tower by integrating the escape system into an aerodynamic fairing that fully encapsulates the crew capsule and smoothly integrates with the launch vehicle. This paper proposes an ascent abort flight test for an all-propulsive towerless escape system concept that is actively controlled and sized to accommodate the Orion Crew Module. The goal of the flight test is to demonstrate a high dynamic pressure escape and to characterize jet interaction effects during operation of the attitude control thrusters at transonic and supersonic conditions. The flight-test vehicle is delivered to the required test conditions by a booster configuration selected to meet cost, manufacturability, and operability objectives. Data return is augmented through judicious design of the boost trajectory, which is optimized to obtain data at a range of relevant points, rather than just a single flight condition. Secondary flight objectives are included after the escape to obtain aerodynamic damping data for the crew module and to perform a high-altitude contingency deployment of the drogue parachutes. Both 3- and 6-degree-of-freedom trajectory simulation results are presented that establish concept feasibility, and a Monte Carlo uncertainty assessment is performed to provide confidence that test objectives can be met.

Tartabini, Paul V.↗
NASA NTRSDate not supplied

Presentation Summary: State of the AGN: Progress Toward Understanding Black Hole Accretion Processes

Accretion of plasma onto black holes power some of the most powerfulsystems in the cosmos. Supermassive black holes at the centers ofgalaxies represent the high-mass limit of these objects and so accountfor the most luminous accretors. As a result, their influence spansvast spatial and temporal scales of cosmic phenomena: intraclusterheating, intergalactic media, galactic feedback and star formation,kiloparsec-scale jets/outflows, variability over time scales of minutesto centuries, and luminous multi-wavelength electromagnetic emissionextending all the way down to its event horizon. Their intrigue isheightened by the fact that they lie at the intersection of variousphysical laws---e.g., general relativistic gravity,magnetohydrodynamics, radiation, high-energy particle physics,thermodynamics, and photo-ionization---which all must be reconciled toarrive at a fundamental understanding and probe for new physics, liketests of general relativity. These physics ingredients must beincorporated into simulations performed somehow on dynamical scalesranging from that of the event horizon to parsec-scales. Fortunately,new computational and theoretical techniques---such as GPU computing,radiation transport, and and novel gridding techniques---are enablingprogress to larger scales, more degrees of freedom, and even to binarysystems. Some of the topics we will survey include recent progress onsimulating the relationship between the disk-jet interaction, howtilted black holes behave, radiation-dominated flow, and how binaryAGN affect the standard picture of black hole accretion. Along theway, we will highlight how new technologies have enabled thesescientific rewards. Future directions and open questions will beprovided to inspire discussion and interaction during the session.

Black Holes↗
NASA NTRSDate not supplied

State of the AGN: Progress Toward Understanding Black Hole Accretion Processes

Accretion of plasma onto black holes power some of the most powerful systems in the cosmos. Supermassive black holes at the centers of galaxies represent the high-mass limit of these objects and so account for the most luminous accretors. As a result, their influence spans vast spatial and temporal scales of cosmic phenomena: intracluster heating, intergalactic media, galactic feedback and star formation, kiloparsec-scale jets/outflows, variability over time scales of minutes to centuries, and luminous multi-wavelength electromagnetic emission extending all the way down to its event horizon. Their intrigue is heightened by the fact that they lie at the intersection of various physical laws---e.g., general relativistic gravity, magnetohydrodynamics, radiation, high-energy particle physics, thermodynamics, and photo-ionization---which all must be reconciled to arrive at a fundamental understanding and probe for new physics, like tests of general relativity. These physics ingredients must be incorporated into simulations performed somehow on dynamical scales ranging from that of the event horizon to parsec-scales. Fortunately, new computational and theoretical techniques---such as GPU computing, radiation transport, and and novel gridding techniques---are enabling progress to larger scales, more degrees of freedom, and even to binary systems. Some of the topics we will survey include recent progress on simulating the relationship between the disk-jet interaction, how tilted black holes behave, radiation-dominated flow, and how binary AGN affect the standard picture of black hole accretion. Along the way, we will highlight how new technologies have enabled these scientific rewards. Future directions and open questions will be provided to inspire discussion and interaction during the session.

LISA↗
NASA NTRSDate not supplied

Status of Mars Retropropulsion Testing in the Langley Unitary Plan Wind Tunnel

Future Mars human landings will be enabled by a powered descent phase starting at supersonic conditions, something which has never been done before on a Mars mission. Significant aerosciences challenges exist due to jet interactions between the retrorocket engine plumes, freestream flow, and vehicle that will affect the aerodynamic behavior during powered descent. Historically, wind tunnel tests have been used to study the interactions with inert gas exhaust simulants in place of rocket engines. On the computational side, flowfield simulations have been completed at full-scale conditions, but the available ground and flight data are not appropriate for calibrating computational uncertainties for aerodynamic interference on proposed Mars descent vehicles, due to insufficient data, dissimilar vehicle geometries, and disparate operating conditions. A wind tunnel test has been designed to begin addressing powered descent aerodynamics risks for large-scale human Mars entry concepts and to identify gaps in computational predictive capabilities. The test will be conducted in the NASA Langley Unitary Plan Wind Tunnel and is designed with improvements in model design and data products over past tests. The test campaign will be run using sub-scale model geometries derived from NASA powered descent reference vehicles: a blunt low lift-to-drag vehicle and a more slender geometry that generates higher unpowered lift. Both models have been fabricated and are ready for testing. The blunt model is equipped with the flexibility to examine the effects of nozzle pointing direction, number, location, size, and area ratio. The main measurements are heatshield aerodynamic interference forces and moments with a custom flow-through balance, discrete and distributed heatshield pressure, and high-speed flowfield visualization. This paper covers the test objectives, facility, models and instrumentation, and planned test matrix.

Mars↗
NASA NTRSDate not supplied

Status of Mars Retropropulsion Testing in the Langley Unitary Plan Wind Tunnel

Future Mars human landings will be enabled by a powered descent phase starting at supersonic conditions, something which has never been done before on a Mars mission. Significant aerosciences challenges exist due to jet interactions between the retrorocket engine plumes, freestream flow, and vehicle that will affect the aerodynamic behavior during powered descent. Historically, wind tunnel tests have been used to study the interactions with inert gas exhaust simulants in place of rocket engines. On the computational side, flowfield simulations have been completed at full-scale conditions, but the available ground and flight data are not appropriate for calibrating computational uncertainties for aerodynamic interference on proposed Mars descent vehicles, due to insufficient data, dissimilar vehicle geometries, and disparate operating conditions. A wind tunnel test has been designed to begin addressing powered descent aerodynamics risks for large-scale human Mars entry concepts and to identify gaps in computational predictive capabilities. The test will be conducted in the NASA Langley Unitary Plan Wind Tunnel and is designed with improvements in model design and data products over past tests. The test campaign will be run using sub-scale model geometries derived from NASA powered descent reference vehicles: a blunt low lift-to-drag vehicle and a more slender geometry that generates higher unpowered lift. Both models have been fabricated and are ready for testing. The blunt model is equipped with the flexibility to examine the effects of nozzle pointing direction, number, location, size, and area ratio. The main measurements are heatshield aerodynamic interference forces and moments with a custom flow-through balance, discrete and distributed heatshield pressure, and high-speed flowfield visualization. This paper covers the test objectives, facility, models and instrumentation, and planned test matrix.

Supersonic Retropropulsion↗
NASA NTRSDate not supplied

Simulation of a Mach 2 Jet in a Supersonic Retropropulsion Configuration

High-fidelity simulations of nozzle flows relevant to supersonic retropropulsion environments have been conducted using CRoCCo-AMR, a validated flow solver with curvilinear adaptive mesh refinement. The computational approach for simulating retropropulsion utilizing generalized curvilinear adaptive mesh refinement are discussed in detail. Initial results are presented for a single nozzle condition with comparison to available experimental data. Strong agreement is demonstrated in key regions of the flowfield. Mean and statistical analyses are performed to characterize unsteady, turbulence quantities present in the canonical retropropulsion environment. The findings herein suggest the presence of a dominant low-frequency mode that appears across the flowfield originating from the primary vortex cores where the freestream and retropropulsion jet interact.

retropropulsion↗
NASA NTRS2013

Jet Surface Interaction-Scrubbing Noise

Generation of sound due to scrubbing of a jet flow past a nearby solid surface is investigated within the framework of the generalized acoustic analogy theory. The analysis applies to the boundary layer noise generated at and near a wall, and excludes the scattered noise component that is produced at the leading or the trailing edge. While compressibility effects are relatively unimportant at very low Mach numbers, frictional heat generation and thermal gradient normal to the surface could play important roles in generation and propagation of sound in high speed jets of practical interest. A general expression is given for the spectral density of the far-field sound as governed by the variable density Pridmore- Brown equation. The propagation Green's function should be solved numerically starting with the boundary conditions on the surface and subject to specified mean velocity and temperature profiles between the surface and the observer. The equivalent sources of aerodynamic sound are associated with non-linear momentum flux and enthalpy flux terms that appear in the linearized Navier-Stokes equations. These multi-pole sources should be modeled and evaluated with input from a Reynolds-Averaged Navier-Stokes (RANS) solver with an appropriate turbulence model.

Khavaran, Abbas↗
NASA NTRS2015

Investigating the Feedback Path in a Jet-Surface Resonant Interaction

A resonant interaction between an 8:1 aspect ratio rectangular jet and flat-plates, placed parallel to the jet, is studied experimentally. For certain locations of the plate relative to the jet, the resonance takes place with a loud accompanying tone. The sound pressure level spectra are often marked by multiple peaks. The frequencies of the spectral peaks are studied as a function of the streamwise length of the plate, its relative location to the jet as well as the jet Mach number. It is demonstrated that the tones are not due to a simple feedback between the plate's trailing edge and the nozzle's exit; the leading edge of the plate also comes into play in the frequency selection. With parametric variation, it is found that there is an order in the most energetic spectral peaks; their frequencies cluster in distinct bands. The 'fundamental', i.e., the lowest frequency band is explained by an acoustic feedback involving diffraction at the plate's leading edge.

Resonance↗
NASA NTRS2015

Investigating the Feedback Path in a Jet-Surface Resonant Interaction

A resonant interaction between an 8:1 aspect ratio rectangular jet and flat-plates, placed parallel to the jet, is addressed in this study. For certain relative locations of the plates, the resonance takes place with accompanying audible tones. Even when the tone is not audible the sound pressure level spectra is often marked by conspicuous peaks. The frequencies of the spectral peaks, as functions of the streamwise length of the plate and its relative location to the jet as well as the jet Mach number, are explored in an effort of understand the flow mechanism. It is demonstrated that the tones are not due to a simple feedback between the plates trailing edge and the nozzle exit; the leading edge also comes into play in determining the frequency. An acoustic feedback path, involving diffraction from the leading edge, appears to explain the frequencies of some of the spectral peaks.

Jet Noise↗
NASA NTRS1974

Effects of reaction control system jet flow field interactions on the aerodynamic characteristics of a 0.010-scale space shuttle orbiter model in the Langley Research Center 31 inch CFHT (OA85)

An experimental investigation was conducted to obtain detailed effects on supersonic vehicle hypersonic aerodynamic and stability and control characteristics of reaction control system jet flow field interactions with the local vehicle flow field. A 0.010-scale model was used. Six-component force data and wing, elevon, and body flap surface pressure data were obtained through an angle-of-attack range of -10 to +35 degrees with 0 deg angle of sideslip. The test was conducted with yaw, pitch and roll jet simulation at a free-stream Mach number of 10.3 and reaction control system plume simulation of flight dynamic pressures of 5, 10 and 20 PSF.

Daileda, J. J.↗
NASA NTRSDate not supplied

On the Interaction Between a Flow Instability and Inertial Particles in Supersonic Jet Plume-Surface Interaction

Extraterrestrial landings often require spacecraft to deploy supersonic jets directed at dusty planetary surfaces to ensure controlled descents. This interaction, termed plume-surface interaction (PSI), critically influences crater formation and the dynamics of ejected particles, which can obscure vision, damage onboard sensors, and impact nearby infrastructure with significant particle velocities. The physics of PSI remain poorly understood due to the complexities in simulating the involved multiphysics and experimentally replicating reduced atmospheric pressure conditions. This article discusses a collaborative effort to investigate PSI in reduced atmospheric pressure environments using a Mach 5.3 jet impinging on a granular bed. The results highlight observations of an azimuthal pattern in the ejecta distribution, characterized by alternating ejecta streaks of varying particle concentrations. This phenomenon suggests the presence of a low Reynolds number instability, a notable discovery given the supersonic nature of the jet.

PSI↗
NASA NTRS1993

Interaction of a jet with a radiation pressure-dominated atmosphere - The case of SS 433

A phenomenological model for the enigmatic object SS 433 is developed in which SS 433 is a neutron star (NS) surrounded by a dense accreted atmosphere. Jets are created close to the neutron star surface by the rapidly spinning NS, toward which matter flows at a super-Eddington rate. This supercritical accretion leads to a quasi-spherical atmosphere around the NS with very high pressure and density close to the surface. The interaction of the jet with the atmosphere as it propagates through it is discussed in detail. A boundary layer (BL) due to radiation viscosity forms between the jet and the surrounding medium. This BL can be visualized as a cocoon of low-density matter around the jet which prevents mass entrainment into the jet. A study of X-ray spectra shows how the radiation-viscous BL can explain the very small Delta v/v that is observed in the jets.

Arav, Nahum↗
NASA NTRS1973

RCS jet-flow field interaction effects on the aerodynamics of the space shuttle orbiter

A study was conducted to determine the external effects caused by operation of the reaction control system during entry of the space shuttle orbiter. The effects of jet plume-external flow interactions were emphasized. Force data were obtained for the basic airframe characteristics plus induced effects when the reaction control system is operating. Resulting control amplification and/or coupling were derived and their effects on the aerodynamic stability and control of the orbiter and the reaction control system thrust were determined.

Rausch, J. R.↗
NASA NTRS1973

Externally blown flap trailing edge noise reduction by slot blowing: A preliminary study

Short takeoff and landing (STOL) aircraft using externally blown flaps (EBF) for lift augmentation develop considerable jet-flap interaction noise. A proposed method to reduce the EBF trailing edge noise is to locate a slot near the trailing edge of a flap through which low velocity secondary air is blown. Limited OASPL noise data were obtained from the interaction of the jet exhaust from a 5.08 cm diameter convergent nozzle with the trailing edge of a plate, and are presented for five slot configurations located near or at the trailing edge of the plate. Also presented are some significant jet trailing edge interaction data using a mixer nozzle with one of the slot configurations.

Mckinzie, D. J., Jr.↗