Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet height”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

First Argon Gas Puff Experiments With 500 ns Implosion Time On Sphinx Driver

Experiments have been performed at the SPHINX driver to study potential of an Argon Gas Puff load designed by AASC. We present here the gas Puff hardware and results of the last shot series.The Argon Gas Puff load used is injected thanks to a 20 cm diameter nozzle. The nozzle has two annuli and a central jet. The pressure and gas type in each of the nozzle plena can be independently adjusted to tailor the initial gaz density distribution. This latter is selected as to obtain an increasing radial density from outer shell towards the pinch axis in order to mitigate the RT instabilities and to increase radiating mass on axis. A flashboard unit produces a high intensity UV source to pre-ionize the Argon gas. Typical dimensions of the load are 200 mm in diameter and 40 mm height. Pressures are adjusted to obtain an implosion time around 550 ns with a peak current of 3.5 MA.With the goal of improving k-shell yield a mass scan of the central jet was performed and implosion time, mainly given by outer and middle plena settings, was kept constant. Tests were also done to reduce the implosion time for two configurations of the central jet. Strong zippering of the radiation production was observed mainly due to the divergence of the central jet over the 40 mm of the load height. Due to that feature k-shell radiation is mainly obtained near cathode. Therefore tests were done to mitigate this effect first by adjusting local pressure of middle and central jet and second by shortening the pinch length.At the end of this series, best shot gave 5 kJ of Ar k-shell yield. PCD detectors showed that k-shell x-ray power was 670 GW with a FWHM of less than 10 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CFD Assessment of Orifice Aspect Ratio and Mass Flow Ratio on Jet Mixing in Rectangular Ducts

Isothermal CFD analysis was performed on axially opposed rows of jets mixing with cross flow in a rectangular duct. Laterally, the jets' centerlines were aligned with each other on the top and bottom walls. The focus of this study was to characterize the effects of orifice aspect ratio and jet-to-mainstream mass flow ratio on jet penetration and mixing. Orifice aspect ratios (L/W) of 4-to-1, 2-to-1, and 1-to-1, along with circular holes, were parametrically analyzed. Likewise, jet-to-mainstream mass flow ratios (MR) of 2.0, 0.5, and 0.25 were systematically investigated. The jet-to-mainstream momentum-flux ratio (J) was maintained at 36 for all cases, and the orifice spacing-to-duct height (S/H) was varied until optimum mixing was attained for each configuration. The numerical results showed that orifice aspect ratio (and likewise orifice blockage) had little effect on jet penetration and mixing. Based on mixing characteristics alone, the 4-to-1 slot was comparable to the circular orifice. The 4-to-1 slot has a smaller jet wake which may be advantageous for reducing emissions. However, the axial length of a 4-to-1 slot may be prohibitively long for practical application, especially for MR of 2.0. The jet-to-mainstream mass flow ratio had a more significant effect on jet penetration and mixing. For a 4-to-1 aspect ratio orifice, the design correlating parameter for optimum mixing (C = (S/H)(sq. root J)) varied from 2.25 for a mass flow ratio of 2.0 to 1.5 for a mass flow ratio of 0.25.

Bain, D. B.↗

An Analysis of the Pressures, Forces and Moments Induced by the Ground Vortex Generated by a Single Impinging Jet

When a jet STOVL aircraft is in STOL operation the jets impinge on the ground and generate wall jets flowing radially outward from the points at which the jets impinge. When the forward flowing part of a wall jet meets the free stream flow it is rolled back on itself forming a parabolic shaped ground vortex. Positive pressures are induced on the lower surface of the configuration ahead of the ground vortex and suction pressures are induced over the ground vortex itself. In addition, the suction pressures induced aft of the jet out of ground effect are reduced and lifting pressures are induced on the upper surface. This study analyzes available pressure and force data and develops a method for estimating the forces and moments induced in ground effect. The method includes the effects of configuration variables, height and operating conditions, as well as the effects of the location, deflection and shape of the jet. However, it is limited to single jets at subcritical nozzle pressure ratios. An analysis of the effects of moving over the ground vs. tests over a fixed ground plane is included.

Kuhn, Richard E.↗

Statistical analysis of power-size-redshift distributions of extragalactic jets

This paper investigates whether a hot, sparse, yet cosmologically significant intergalactic medium is consistent with data collected from extragalactic radio sources. This is done by use of Monte Carlo simulations which employ previously run pseudohydrodynamical simulations to cover an observational parameter space. These observational parameters include the scale height, central density, and temperature of a (isothermal) galactic halo, and the power of the central engine which drives the jet. The Monte Carlo simulations generate distribution of sizes in bins of (received) power and redshift, which have been compared with observational data using Kolmogorov-Smirnov tests. Results of this analysis are consistent with the existence of an IGM with temperature and density mentioned above. In addition, this analysis suggests that the active lifetime of powerful extragalactic radio sources decreases with increasing power.

Rosen, Alexander↗

Convective and Turbulent Motions in Nonprecipitating Cu. Part II: LES Simulated Cloud Represented by a Starting Plume

The dynamic structure of a small trade wind cumulus (Cu) is analyzed using a novel approach. Cu developing in a shear-free environment is simulated by 10-m-resolution LES model with spectral bin microphysics. The aim is to clarify the dynamical nature of cloud updraft zone (CUZ) including entrainment and mixing in growing Cu. The validity of concept stating that a cloud at developing state can be represented by a parcel or a jet is tested. To investigate dynamical entrainment in CUZ performed by motions with scales larger than the turbulence scales, the modeled fields of air velocity were filtered by wavelet filter that separated convective motions from turbulent ones. Two types of objects in developing cloud were investigated: small volume ascending at maximal velocity (point parcel) and CUZ. It was found that the point parcel representing the upper part of cloud core is adiabatic. The motion of the air in this parcel ascending from cloud base determines cloud-top height. The top-hat (i.e., averaged) values of updraft velocity and adiabatic fraction in CUZ are substantially lower than those in the point parcel. Evaluation of the terms in the dynamical equation typically used in 1D cloud parcel models show that this equation can be applied for calculation of vertical velocities at the developing stage of small Cu, at least up to the heights of the inversion layer. Dynamically, the CUZ of developing cloud resembles the starting plume with the tail of nonstationary jet. Both the top-hat vertical velocity and buoyancy acceleration linearly increase with the height, at least up to the inversion layer. An important finding is that lateral entrainment of convective (nonturbulent) nature has a little effect on the top-hat CUZ velocity and cannot explain the vertical changes of conservative variables qt and θl. In contrast, entrained air lifting inside CUZ substantially decreases top-hat liquid water content and its adiabatic fraction. Possible reasons of these effects are discussed.

54 ENVIRONMENTAL SCIENCES↗

Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets

Present paper developed a series of additively manufactured parallel cooling channels with streamwise wall jets inside, which could be suitable for double-wall and near-wall cooling configurations in gas turbine hot section components. The tested coupons consisted of parallel channels, each channel further divided into small chambers using several spanwise separation walls. Height of these walls was kept less than channel height, thus forming a slot with one of the end walls. Coolant entered from one side of channel and formed streamwise wall jet while crossing through the slot over to the downstream chamber. The test coupons were additively manufactured by selective laser sintering (SLS) technique using Inconel 718 alloy. Steady-state heat transfer experiments with constant wall temperature boundary condition were performed to analyze effect of pitch between subsequent slots and blockage ratio (ratio of separation wall height to channel height) on heat transfer. The channel Reynolds number ranged from 1800 to 5000. Numerical simulations were performed using ANSYS cfx solver with SST k–ω turbulence model to obtain detailed understanding of existing flow field. Experimental results showed heat transfer enhancement of up to 6.5 times that of a smooth channel for the highest blockage ratio of 0.75. Numerical results revealed complex flow field which consisted of wall jets along with impingement, separation, and recirculation zones in each chamber. For all configurations, gain in heat transfer was accompanied with high pressure drops. However, coupled with the high heat transfer, this design could lead to potential coolant savings.

Engineering↗

TOMS ozone data compared at mesoscale resolution to tropopause heights from the AVE radiosonde network and to VAS radiances over the south-central United States

Observations from 1982 are being compared between the Total Ozone Mapping Spectrometer (TOMS), the Atmospheric Variability Experiment (AVE), and the VISSR Atmospheric Sounder (VAS) across Texas and Oklahoma. TOMS data show a significant ozone maximum over northeastern Texas. AVE radiosonde analysis shows tropopause heights with the highest pressure (lowest altitudes) over central Oklahoma accompanied by a mid-level jet across northern Mexico exiting above the Texas-Gulf coast. Corresponding VAS radiances show a dry slot in the middle tropopause across central Texas accompanied by a secondary slot over Oklahoma. The maxima are separated by 100 to 500 km. The impact of TOMS data on tropopause analysis is preliminarily seen as insignificant because TOMS data is not registered with respect to AVE tropopause heights.

Chesters, Dennis↗

Effect of nozzle spacing on ground interference forces for a two jet V/STOL aircraft

The effect of nozzle spacing on ground interference forces was investigated for a two jet V/STOL aircraft design. The need for information on the effect of jet spacing arises because of the tradeoff between mechanical complexity, which calls for close spacing, and roll control moments, which call for wider spacing. The ground interference forces on a two jet V/STOL aircraft model were measured for a range of nozzle spacings. Interference forces showed a complicated behavior with nozzle spacing, fuselage geometry, and height above ground. For some conditions a slight change in nozzle spacing resulted in a fourfold change in the interference force from 3% to 12% of the basic jet thrust. An understanding of the observed aircraft force behavior was developed using detailed measurements of the upwash flow properties, along with force and pressure measurements on a series of two dimensional fuselage representations.

Hill, W. G., Jr.↗

Near-infrared mapping of spiral barred galaxies

In external galaxies, near-infrared emission originates from stellar populations, hot dust, free-free emission from H+ regions, gaseous emission, non-thermal nucleus if any. Because of the low extinction compared to the visible, infrared wavelengths are useful to probe regions obscured by dust such as central parts where starburst phenomena can occur because of the large quantity of matter. The results presented were obtained with a 32 x 32 InSb charge injection device (CID) array cooled at 4K, at the f/36 cassegrain focus of the 3m60 Canada-France-Hawaii telescope with a spatial resolution of 0.5 inches per pixel. The objects presented are spiral barred galaxies mapped at J(1.25 microns), H(1.65 microns) and K(2.2 microns). The non-axisymetric potential due to the presence of a bar induces dynamical processes leading to the confinement of matter and peculiar morphologies. Infrared imaging is used to study the link between various components. Correlations with other wavelengths ranges and 2-colors diagrams ((J-H), (H-K)) lead to the identification of star forming regions, nucleus. Maps show structures connected to the central core. The question is, are they flowing away or toward the nucleus. Observations of M83 lead to several conclusions. The star forming region, detected in the visible and the infrared cannot be very compact and must extend to the edge of the matter concentration. The general shape of the near-infrared emission and the location of radio and 10 micron peaks suggest the confinement of matter between the inner Linblad resonances localized from CO measurements about 100 and 400 pc. The distribution of color indices in the arc from southern part to the star forming region suggests an increasing amount of gas and a time evolution eventually triggered by supernova explosions. Close to the direction of the bar, a bridge-like structure connects the arc to the nucleus with peculiar color indices. Perhaps, this structure can be linked to a height velocity component seen in UV and we can attribute it to a jet and/or a matter flow along the bar toward the nucleus, fuelling it. NGC 1068 is the nearest Seyfert 2 galaxy. It has been a subject of many studies at all wavelengths. This object was mapped at J, H, K, L and M, and in polaro-imagery. Results are given.

Gallais, P.↗

Excessive Subsidence of the Southeast Atlantic Biomass Burning Aerosol Plume in the NASA Goddard Earth Observing System (GEOS) Model

Global models struggle to accurately represent the meteorological environment over the Southeast Atlantic Ocean, as evidenced by the poor representation of persistent marine stratocumulus decks off the west coast of southern Africa. This complex regime also experiences significant seasonal biomass burning aerosol plumes that are transported from southern Africa over the Atlantic Ocean, which gradually descend via large scale subsidence and interact radiatively and microphysically with the cloudy environment of the region. In comparisons to space borne lidar and aircraft observations we find that the NASA Goddard Earth Observing System (GEOS) model’s MERRA-2 aerosol and meteorology reanalysis shows that the aerosol plume descends too rapidly due to exaggerated large-scale downward vertical motion. This complicates the evaluation of aerosol properties utilizing aircraft observations collected throughout the ORACLES campaign as well as the model’s representation of the heating rate profiles due to the aerosol itself and its radiative interaction with the semi-permanent cloud deck typically located lower in altitude than the smoke. Two types of modeling experiments using GEOS will be presented to diagnose deficiencies in the model related to the excessive subsidence. Ensembles of free-running model simulations with and without radiatively active biomass burning aerosol will be used to quantify the impact of smoke on the atmospheric circulation. It will be demonstrated that heating within the aerosol layer results in self lofting through a reduction of the subsidence but did not alter the vertical placement or speed of the African Easterly jet. The amount of aerosol absorption required to eliminate the bias in the height of the aerosol plume through self-lofting will then be quantified. Finally, a second type of modeling experiment will be discussed in which the meteorology is constrained to observations. This will allow for biases in the height of the aerosol plume due to the general circulation model to be distinguished from biases that may be induced through the data assimilation process.

Allison Collow↗

OBSERVING THE ROOTS OF SOLAR CORONAL HEATING-IN THE CHROMOSPHERE

The Sun's corona is millions of degrees hotter than its 5000 K photosphere. This heating enigma is typically addressed by invoking the deposition at coronal heights of nonthermal energy generated by the interplay between convection and magnetic field near the photosphere. However, it remains unclear how and where coronal heating occurs and how the corona is filled with hot plasma. We show that energy deposition at coronal heights cannot be the only source of coronal heating by revealing a significant coronal mass supply mechanism that is driven from below, in the chromosphere. We quantify the asymmetry of spectral lines observed with Hinode and SOHO and identify faint but ubiquitous upflows with velocities that are similar (50-100 km s{sup -1}) across a wide range of magnetic field configurations and for temperatures from 100,000 to several million degrees. These upflows are spatiotemporally correlated with and have similar upward velocities as recently discovered, cool (10,000 K) chromospheric jets or (type II) spicules. We find these upflows to be pervasive and universal. Order of magnitude estimates constrained by conservation of mass and observed emission measures indicate that the mass supplied by these spicules can play a significant role in supplying the corona with hot plasma. The properties of these events are incompatible with coronal loop models that include only nanoflares at coronal heights. Our results suggest that a significant part of the heating and energizing of the corona occurs at chromospheric heights, in association with chromospheric jets.

99 GENERAL AND MISCELLANEOUS↗

Geometry considerations for jet noise shielding with CTOL engine-over-the-wing concept

Jet noise shielding benefits for CTOL engine-over-the-wing installations were obtained with various model-scale circular nozzles and wing chord geometries. Chord-to-nozzle diameter ratios were varied from 3 to 20, while ratios of nozzle height above the wing to the diameter were varied from near zero to 3. Spectral noise data were obtained with jet velocities from 640 to 1110 ft/sec. Characteristics of low frequency noise sources are discussed. Jet-noise shielding is correlated in terms of acoustic and geometric parameters. Implications of extending the model-scale data to full-scale are discussed.

Vonglahn, U.↗

Geometry considerations for jet noise shielding with CTOL engine-over-the-wing concept

Jet noise shielding benefits for CTOL engine-over-the-wing installations were obtained with various model-scale circular nozzles and wing chord geometries. Chord-to-nozzle diameter ratios were varied from 3 to 20, while ratios of nozzle height above the wing to the diameter were varied from near zero to 3. Spectral noise data were obtained with jet velocities from 640 to 1110 ft/sec. Characteristics of low frequency noise sources are discussed. Jet-noise shielding is correlated in terms of acoustic and geometric parameters. Implications of extending the model-scale data to full-scale are discussed.

Von Glahn, U.↗

ORIGIN OF MACROSPICULE AND JET IN POLAR CORONA BY A SMALL-SCALE KINKED FLUX TUBE

We report an observation of a small-scale flux tube that undergoes kinking and triggers the macrospicule and a jet on 2010 November 11 in the north polar corona. The small-scale flux tube emerged well before the triggering of the macrospicule and as time progresses the two opposite halves of this omega-shaped flux tube bent transversely and approach each other. After {approx}2 minutes, the two approaching halves of the kinked flux tube touch each other and an internal reconnection as well as an energy release takes place at the adjoining location and a macrospicule was launched which goes up to a height of 12 Mm. Plasma begins to move horizontally as well as vertically upward along with the onset of the macrospicule and thereafter converts into a large-scale jet in which the core denser plasma reaches up to {approx}40 Mm in the solar atmosphere with a projected speed of {approx}95 km s{sup -1}. The fainter and decelerating plasma chunks of this jet were also seen up to {approx}60 Mm. We perform a two-dimensional numerical simulation by considering the VAL-C initial atmospheric conditions to understand the physical scenario of the observed macrospicule and associated jet. The simulation results show that reconnection-generated velocity pulse in the lower solar atmosphere steepens into slow shock and the cool plasma is driven behind it in the form of macrospicule. The horizontal surface waves also appeared with shock fronts at different heights, which most likely drove and spread the large-scale jet associated with the macrospicule.

79 ASTRONOMY AND ASTROPHYSICS↗

Preliminary results from the Sprites94 aircraft campaign: 1. Red sprites

The dual jet aircraft Sprites94 campaign yielded the first color imagery and unambiguously triangulated physical dimensions and heights of upper atmospheric optical emissions associated with thunderstorm systems. Low light level television images, in both color and in black and white (B/W), obtained during the campaign show that there are at least two distinctively different types of optical emissions spanning part or all of the distance between the anvil tops and the ionosphere. The first of these emissions, dubbed 'sprites' after their elusive nature, are luminous structures of brief (less than 16 ms) duration with a red main body that typically spans the latitude range 50-90 km, and possessing lateral dimensions of 5-30 km. Faint bluish tendrils often extend downward from the main body of sprites, occasionally appearing to reach cloud tops near 20 km. In this paper the principal characteristics of red sprites as observed during the Sprites94 campaign are described. The second distinctive type of emissions, 'blue jets,' are described in a companion paper (Wescott et al., this issue).

Sentman, D. D.↗

CFD mixing analysis of axially opposed rows of jets injected into confined crossflow

A CFD parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. An isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing for the cases of: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls) configurations. For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum nonimpinging jet spacing. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5).

Bain, D. B.↗

CFD mixing analysis of axially opposed rows of jets injected into confined crossflow

A computational fluid dynamics (CFD) parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. Isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing. Two lateral arrangements were analyzed: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls). For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum non-impinging jet spacing. The inline configurations, due to their smaller orifice size at optimum S/H, produced better initial mixing characteristics. At downstream locations (e.g. x/H of 1.5), the optimum non-impinging staggered configuration produced better mixing than the optimum inline configuration for J of 64; the opposite results were observed for J of 16. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5).

Bain, D. B.↗

DETERMINING THE OPTIMAL LOCATIONS FOR SHOCK ACCELERATION IN MAGNETOHYDRODYNAMICAL JETS

Observations of relativistic jets from black hole systems suggest that particle acceleration often occurs at fixed locations within the flow. These sites could be associated with critical points that allow the formation of standing shock regions, such as the magnetosonic modified fast point (MFP). Using the self-similar formulation of special relativistic magnetohydrodynamics by Vlahakis and Koenigl, we derive a new class of flow solutions that are both relativistic and cross the MFP at a finite height. Our solutions span a range of Lorentz factors up to at least 10, appropriate for most jets in X-ray binaries and active galactic nuclei, and a range in injected particle internal energy. A broad range of solutions exists, which will allow the eventual matching of these scale-free models to physical boundary conditions in the analysis of observed sources.

79 ASTRONOMY AND ASTROPHYSICS↗