Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “isotherm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Isothermal elastohydrodynamic lubrication of point contacts. III - Fully flooded results

Procedures outlined by the authors in an earlier publication (1976) on theoretical formulation for isothermal elastohydrodynamic lubrication of point contacts are used to assess the influence of the ellipticity parameter and the dimensionless speed, load, and material parameters on minimum film thickness. Conditions equivalent to using solid materials of bronze, steel, and silicon nitride, and lubricants of paraffinic and naphthenic mineral oils are considered in obtaining the exponent on the dimensionless material parameter. Thirty-four different cases are used to generate the fully flooded film thickness formula. A fully flooded condition is said to exist when the inlet distance of the conjunction ceases to influence in any significant way the minimum film thickness. Contour plots are also shown that indicate in detail the pressure spike and two side lobes in which the minimum film thickness occurs.

Hamrock, B. J.↗
NASA NTRS1976

Isothermal elastohydrodynamic lubrication of point contacts. IV - Starvation results

Previously developed basic theory for isothermal elastohydrodynamic lubrication of point contacts is used to study the effect of lubricant starvation on pressure and film thickness within the conjunction. A simple expression for the dimensionless inlet boundary distance is derived. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Simple expressions for the minimum and central film thickness under starvation condition are presented. Contour plots of pressure and film thickness in and around the contact are shown in order to gain a better insight into what occurs in going from fully flooded to lubricant starvation condition. Theoretical predictions are compared with earlier results.

Hamrock, B. J.↗
NASA NTRS1977

Isothermal degradation of poly-2,2'-/m-phenylene/-5,5'-bibenzimidazole

The isothermal degradation of poly-2,2'-(m-phenylene)-5,5'-bibenzimidazole in vacuo has been studied. Measurement of the increase in pressure with time, coupled with infrared analysis, was used to determine the distribution of the degradation products. Processes A and B with different second-order rate laws were determined to be significant in the temperature range of 550-700 C. Process A leads to the formation of equimolar quantities of hydrogen and ammonia and has an activation energy of 68 kcal/mole. Process B leads to the production of HCN, NH3, and H2 in the ratio of 1:1:2.5 and has an activation energy of 77 kcal/mole. The activation energies and the rate laws are consistent with a mechanism in which the initial degradation step is the bimolecular reaction of two aromatic rings.

Lerner, N. R.↗
NASA NTRS1977

Friction factor for isothermal and nonisothermal flow through porous media

Measurements were performed to determine the pressure drops for gaseous flow through porous materials of different microstructures, porosities, and thickness under isothermal and nonisothermal conditions at various temperature levels. Results were satisfactorily correlated by a simple equation relating the friction factor to the Reynolds number and porosities.

Koh, J. C.↗
NASA NTRS1978

The isothermal dust condensation of Nova Vulpeculae 1976

Nova Vulpeculae 1976 has been followed with broad-band photometry at wavelengths of 0.5 to 12.5 microns from day 3 to day 235. Three definite phases are identified. They are expanding pseudophotosphere, free-free expansion, and dust condensation. A very long (day 80 to day 220) period of isothermal infrared emission (temperature approximately 900 K) is accompanied by an exponential decrease in infrared luminosity and is interpreted in terms of continuous mass ejection in the nova wind.

Ney, E. P.↗
NASA NTRS1980

Full-coverage film cooling on flat, isothermal surfaces: Data and predictions

The heat transfer and fluid mechanics characteristics of full-coverage film cooling were investigated. The results for flat, isothermal plates for three injection geometries (normal, slant, and compound angle) are summarized and data concerning the spanwise distribution of the heat transfer coefficient within the blowing region are presented. Data are also presented for two different numbers of rows of holes (6 and 11). The experimental results summarized can be predicted with a two dimensional boundary layer code, STANCOOL, by providing descriptors of the injection parameters as inputs.

Crawford, M. E.↗
NASA NTRS1979

Effects of isothermal and cyclic exposures on interface structure and mechanical properties of FPalpha-Al2O3/aluminum composites

The microstructural and interface stability of FPalpha-Al203/Al-Li composites are investigated as a function of isothermal exposure at 500 C or thermal cycling between 140 and 500 C with hold time at Tmax. Interfacial morphology, growth kinetics, crystal structure, and composition of interfacial reaction products are characterized. Strength is monitored in the transverse orientation, and fracture mechanics is analyzed in terms of interface reaction products. The interfacial reaction product in FP/Al is Li2O.5Al2O3. Significant fiber-matrix reaction occurs during fabrication. The number of thermal cycles rather than total time at Tmax is the determining factor in strength degradation, thermal cycling giving rise to voids at the fiber-matrix interface. Extensive interface failures occur at composite fracture stresses below about 128 MPa; above this stress level failure is attributed to ductile matrix fracture.

Kim, W. M.↗
NASA NTRS1979

Isothermal-desorption-rate measurements in the vicinity of the Curie temperature for H2 chemisorbed on nickel films

Measurements of the isothermal desorption rate of H2 chemisorbed onto polycrystalline nickel films made for temperatures spanning the Curie temperature of the nickel film are presented. Desorption kinetics were followed by measuring the decay of the change in resistance of the nickel film brought about by hydrogen chemisorption after gas-phase H2 had been rapidly evacuated. The desorption rate is found to undergo an anomalous decrease in the vicinity of the Curie temperature, accompanied by an increase in the desorption activation energy and the equilibrium constant for the chemisorbed hydrogen. The results are interpreted in terms of anomalous variations in rate constants for the formation of the precursor molecular adsorbed state and the chemisorbed atomic state due to the phase transition in the nickel. The changes in rate constants are also considered to be in qualitative agreement with theoretical predictions based on a spin coupling between the adatom and the magnetic substrate.

Shanabarger, M. R.↗
NASA NTRS1980

The effect of zirconium on the isothermal oxidation of nominal Ni-14Cr-24Al alloys

The isothermal oxidation of Ni-14Cr-24Al-xZr-type alloys was performed in still air at 1100, 1150, and 1200 C for times up to 200 hr. The zirconium content of the alloys varied from 0-0.63 atom percent (a/o). The oxidized surfaces were studied by optical microscopy, X-ray diffraction, and scanning electron microscopy. The base alloy was an alumina former with the zirconium-containing alloys also developing some ZrO2. The addition of zirconium above 0.066 a/o increased the rate of weight gain relative to the base alloy. Due to oxide penetratio, the weight gain increased with Zr content; however, the scale thickness did not increase. The Zr did increase the adherence of the oxide, particularly at 1200 C. The delta W/A vs. time data fit the parabolic model of oxidation. The specific diffusion mechanism operative could not be identified by analysis of the calculated activation energies. Measurements of the Al2O3 scale lattice constants yielded the same values for all alloys.

Kahn, A. S.↗
NASA NTRS1980

The influence of isothermal annealing on the molybdenum fibers of a directed solid gamma/gamma prime - alpha alloy

The mechanical characteristics of the directed solid eutectic Ni-Al-Mo (gamma/gamma prime)-alpha alloy at high temperatures make it useful in the blades of gas turbines. Structural changes are observed for the alloy under isothermal annealing, particularly the formation of molybdenum plates at the grain boundary and an increase of the gamma phase in relation to the gamma prime phase. Molybdenum lamellas appear at the grain boundary above 1100 C which can have a negative influence on the mechanical properties. The change in the structure near the grain boundary with the increase in temperature is illustrated through a sequence of pictures.

Whittenberger, J. D.↗
NASA NTRS1981

Simultaneous operation of three CCN counters and an isothermal haze chamber at the 1980 International CCN Workshop

Four devices were operated for the detection and characterization of cloud condensation nuclei (CCN) and fog condensation nuclei (FCN). In chronological order of development, the CCN devices are the conventional continuous-flow diffusion chamber (CFD), the rapid-cycle CCN spectrometer, and the instantaneous CCN spectrometer. The FCN detection device is an isothermal haze chamber (IHC). These four instruments are discussed and general comments on their performance at the workshop are given.

Hudson, J. G.↗
NASA NTRS1982

Non-isothermal effects on SO2 absorption by water droplets. I - Model development. II - Results and discussion

An analytic model of SO2 absorption in a falling water droplet is developed and a simulation of SO2 washout is performed. Nonisothermic effects on drop growth, droplet physical parameters, reaction rates, and multicomponent diffusion are treated in the model. The gas-liquid interface is assumed to be at equilibrium, and interfacial resistance is negligible. Raindrops are simulated as falling from a 2 km height through an atmospheric region containing SO2. The droplets decrease in size from evaporation and cooling, and their slightly basic pH aids SO2 absorption. The simulation indicates higher SO2 absorption at higher altitudes, and desorption may occur at ground level. Isothermal effects are concluded to be significant, and quantification of effects will depend on further modelling.

Reda, M.↗
NASA NTRS1982

Axisymmetric collapse of rotating, isothermal clouds

The results of over 50 new models of the axisymmetric collapse of rotating, isothermal clouds are presented, with the following objectives: (1) to fully explore the initial conditions necessary for collapse from uniform density and uniform rotation, subject to constant volume and constant pressure boundary conditions; (2) to catalog the possible end states for cloud collapse from these initial conditions; and (3) to determine if there is a critical value of rotational energy/gravitational energy associated with ring formation, as appears to be the case for adiabatic clouds. Three end states are obtained: Bonnor-Ebert spheroids, rings and collapsing disks. The rings are formed with values of the ratio of rotational energy to the absolute value of the gravitational energy typically less than the Maclaurin spheroid value for dynamic instability to ring formation.

Boss, A. P.↗
NASA NTRS1982

Isothermal separation processes

The isothermal processes of membrane separation, supercritical extraction and chromatography were examined using availability analysis. The general approach was to derive equations that identified where energy is consumed in these processes and how they compare with conventional separation methods. These separation methods are characterized by pure work inputs, chiefly in the form of a pressure drop which supplies the required energy. Equations were derived for the energy requirement in terms of regular solution theory. This approach is believed to accurately predict the work of separation in terms of the heat of solution and the entropy of mixing. It can form the basis of a convenient calculation method for optimizing membrane and solvent properties for particular applications. Calculations were made on the energy requirements for a membrane process separating air into its components.

England, C.↗
NASA NTRS1983

Effect of variable thermal conductivity on isotherms in Bridgman growth

A change in thermal conductivity associated with melting or solidification can have a profound influence on the isotherms near the solidification interface if the material is being directionally solidified in an ampoule whose walls carry a substantial portion of the heat. This analysis was prompted by a recent discovery that the thermal conductivity of Hg(1-x)CD(x)Te increased dramatically as the material is heated above the solidus curve. An illustrative example is shown in which the sample is approximated as an infinite cylinder with constant but diffferent thermal properties in the solid and melt. The boundary conditions are fixed on the surface by a conductive ampoule in a two-zone Bridgman furnace with an adiabatic region separating the two zones. The effect of the adiabatic zone in this case is to intensify the curvature of the interface rather than to lessen it.

Naumann, R. J.↗
NASA NTRS1984

The collapse of the cores of slowly rotating isothermal clouds

A generalized model which accounts for the effects of initially uniform and slow rotation is defined for the spherical collapse of a singular isothermal sphere such as protosolar and binary nebulae. An initial unstable equilibrium state is described for a sound speed of 0.35 km/sec and a rotation rate of 10 to the -14th/sec for the molecular cloud surrounding the accreting core. The total angular momentum and mass of the inner cloud is set equal to solar system values. The evolution of the collapse is traced by applying a perturbation analysis to the similarity solution for a nonrotating condition, and matched asymptotic expansions solve the hydrodynamic equations. The model is concluded a valid tool for studying star and nebular disk formation.

Terebey, S.↗
NASA NTRS1984

Temperature stability limits for an isothermal demagnetization refrigerator

It is pointed out that magnetic refrigeration can provide additional cooling for infrared detectors on space missions, taking into account the Shuttle Infrared Telescope Facility (SIRTF) and the Large Deployable Reflector (LDR). From a temperature of 2 K provided by the primary cryogens, magnetic refrigerators could cool bolometers or pumped photoconductors to 0.1 K or below. Such a reduction in operating temperature would increase the sensitivity for bolometers, while the response at longer wavelengths for pumped photoconductors would be improved. Two types of magnetic refrigeration cycles have been proposed. One type uses a complete demagnetization. The present investigation is concerned with the second type, which uses a feedback-controlled isothermal demagnetization, taking into account the temperature stability limits. Attention is given to control system resolution, thermometer noise, reaction time, and thermal time constants.

Kittel, P.↗