Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “instantaneous position”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Trajectory Calculator for Finite-Radius Cutter on a Lathe

A computer program calculates the two-dimensional trajectory (radial vs. axial position) of a finite-radius-of-curvature cutting tool on a lathe so as to cut a workpiece to a piecewise-continuous, analytically defined surface of revolution. (In the original intended application, the tool is a diamond cutter, and the workpiece is made of a crystalline material and is to be formed into an optical resonator disk.) The program also calculates an optimum cutting speed as F/L, where F is a material-dependent empirical factor and L is the effective instantaneous length of the cutting edge.

Savchenkov, Anatoliy↗
NASA NTRS2021

DDOTI Observations of Gravitational-Wave Sources Discovered in O3

We present optical follow-up observations with the Deca-Degree Optical Transient Imager (DDOTI) telescope of gravitational-wave (GW) events detected during the Advanced LIGO and Advanced Virgo O3 observing run. DDOTI is capable of responding to an alert in a few minutes, has an instantaneous field of about 69 deg2, and obtains 10σ upper limits of wlim = 18.5–20.5 AB mag in 1000 s of exposure, depending on the conditions. We observed 54 per cent (26 out of 48) of the unretracted GW alerts and did not find any electromagnetic counterparts. We compare our upper limits to various possible counterparts: the kilonova AT 2017gfo, models of radioactive- and magnetar-powered kilonovae, short gamma-ray burst afterglows, and active galactic nucleus (AGN) flares. Although the large positional uncertainties of GW sources do not allow us to place strong constraints during O3, DDOTI observations of well-localized GW events in O4 and beyond could meaningfully constrain models of compact binary mergers. We show that DDOTI is able to detect kilonovae similar to AT 2017gfo up to about 200 Mpc and magnetar-powered kilonovae up to 1 Gpc. We calculate that nearby (≲200 Mpc) afterglows have a high chance (≈70 per cent) to be detected by rapid (≲3 h) DDOTI observations if observed on-axis, whereas off-axis afterglows are unlikely to be seen. Finally, we suggest that long-term monitoring of massive BBH events with DDOTI could confirm or rule out late AGN flares associated with these events.

gravitational waves↗
NASA NTRS1980

Closed loop performance of a brushless dc motor powered electromechanical actuator for flight control applications

A comprehensive digital model for the analysis and possible optimization of the closed loop dynamic (instantaneous) performance of a power conditioner fed, brushless dc motor powered, electromechanical actuator system (EMA) is presented. This model was developed for the simulation of the dynamic performance of an actual prototype EMA built for NASA-JSC as a possible alternative to hydraulic actuators for consideration in Space Shuttle Orbiter applications. Excellent correlation was achieved between numerical model simulation and experimental test results obtained from the actual hardware. These results include: various current and voltage waveforms in the machine-power conditioner (MPC) unit, flap position as well as other control loop variables in response to step commands of change of flap position. These results with consequent conclusions are detailed in the paper.

Demerdash, N. A.↗
NASA NTRS2009

The Impact of the Assimilation of AIRS Radiance Measurements on Short-term Weather Forecasts

Advanced spaceborne instruments have the ability to improve the horizontal and vertical characterization of temperature and water vapor in the atmosphere through the explicit use of hyperspectral thermal infrared radiance measurements. The incorporation of these measurements into a data assimilation system provides a means to continuously characterize a three-dimensional, instantaneous atmospheric state necessary for the time integration of numerical weather forecasts. Measurements from the National Aeronautics and Space Administration (NASA) Atmospheric Infrared Sounder (AIRS) are incorporated into the gridpoint statistical interpolation (GSI) three-dimensional variational (3D-Var) assimilation system to provide improved initial conditions for use in a mesoscale modeling framework mimicking that of the operational North American Mesoscale (NAM) model. The methodologies for the incorporation of the measurements into the system are presented. Though the measurements have been shown to have a positive impact in global modeling systems, the measurements are further constrained in this system as the model top is physically lower than the global systems and there is no ozone characterization in the background state. For a study period, the measurements are shown to have positive impact on both the analysis state as well as subsequently spawned short-term (0-48 hr) forecasts, particularly in forecasted geopotential height and precipitation fields. At 48 hr, height anomaly correlations showed an improvement in forecast skill of 2.3 hours relative to a system without the AIRS measurements. Similarly, the equitable threat and bias scores of precipitation forecasts of 25 mm (6 hr)-1 were shown to be improved by 8% and 7%, respectively.

McCarty, Will↗
NASA NTRS2015

Avionics Configuration Assessment for Flightdeck Interval Management: A Comparison of Avionics and Notification Methods

Flightdeck Interval Management is one of the NextGen operational concepts that FAA is sponsoring to realize requisite National Airspace System (NAS) efficiencies. Interval Management will reduce variability in temporal deviations at a position, and thereby reduce buffers typically applied by controllers - resulting in higher arrival rates, and more efficient operations. Ground software generates a strategic schedule of aircraft pairs. Air Traffic Control (ATC) provides an IM clearance with the IM spacing objective (i.e., the TTF, and at which point to achieve the appropriate spacing from this aircraft) to the IM aircraft. Pilots must dial FIM speeds into the speed window on the Mode Control Panel in a timely manner, and attend to deviations between actual speed and the instantaneous FIM profile speed. Here, the crew is assumed to be operating the aircraft with autothrottles on, with autopilot engaged, and the autoflight system in Vertical Navigation (VNAV) and Lateral Navigation (LNAV); and is responsible for safely flying the aircraft while maintaining situation awareness of their ability to follow FIM speed commands and to achieve the FIM spacing goal. The objective of this study is to examine whether three Notification Methods and four Avionics Conditions affect pilots' performance, ratings on constructs associated with performance (workload, situation awareness), or opinions on acceptability. Three Notification Methods (alternate visual and aural alerts that notified pilots to the onset of a speed target, conformance deviation from the required speed profile, and reminded them if they failed to enter the speed within 10 seconds) were examined. These Notification Methods were: VVV (visuals for all three events), VAV (visuals for all three events, plus an aural for speed conformance deviations), and AAA (visual indications and the same aural to indicate all three of these events). Avionics Conditions were defined by the instrumentation (and location) used to present IM information to crews: (1) Integrated (IM information is embedded in extant PFD (Primary Flight Display), ND (Navigation Display), EICAS (Engine Indicating and Crew Alerting System) displays); (2) EFB_Aft (IM information is only supplied in an EFB and mounted in location similar to that for MITRE's UPS work); (3) EFB_Fore (IM information is only supplied in an EFB which is mounted more forward, under the side window), and (4) EFB_Aft plus use of an AGD (the same IM information is supplied in an EFB and on an AGD, both mounted in locations similar to that in MITRE's UPS work ). Twelve commercial pilot crews flew descent scenarios (VNAV Speed with the mode control panel (MCP) speed window open until flaps extended, then VNAV Path) in a commercial transport flight simulator with realistic visual scene and communications. The results of this study serve three practical aims: (1) contribute to the down-select of avionics configuration for future assessment of the ASTAR spacing algorithm at NASA; (2) provide information useful to the FAA Human Factors Division (ANG-C1)'s mission to identify issues pertinent to flight certification of, and flight standards; (3) identify methodological considerations in support of future FIM human-in-the-loop (HITL) investigations.

Latorella, Kara A.↗
NASA NTRS2017

The Mars Science Laboratory Curiosity Rover Mastcam Instruments: Preflight and In-Flight Calibration, Validation, and Data Archiving

The NASA Curiosity rover Mast Camera (Mastcam) system is a pair of fixed-focal length, multispectral, color CCD imagers mounted approximately 2 m above the surface on the rover's remote sensing mast, along with associated electronics and an onboard calibration target. The left Mastcam (M-34) has a 34 mm focal length, an instantaneous field of view (IFOV) of 0.22 mrad, and a FOV of 20 deg × 15 deg over the full 1648 × 1200 pixel span of its Kodak KAI-2020 CCD. The right Mastcam (M-100) has a 100 mm focal length, an IFOV of 0.074 mrad, and a FOV of 6.8 deg × 5.1 deg using the same detector. The cameras are separated by 24.2 cm on the mast, allowing stereo images to be obtained at the resolution of the M-34 camera. Each camera has an eight-position filter wheel, enabling it to take Bayer pattern red, green, and blue (RGB) 'true color' images, multispectral images in nine additional bands spanning approximately 400-1100 nm, and images of the Sun in two colors through neutral density-coated filters. An associated Digital Electronics Assembly provides command and data interfaces to the rover, 8 Gb of image storage per camera, 11 bit to 8 bit companding, JPEG compression, and acquisition of high-definition video. Here we describe the preflight and in-flight calibration of Mastcam images, the ways that they are being archived in the NASA Planetary Data System, and the ways that calibration refinements are being developed as the investigation progresses on Mars. We also provide some examples of data sets and analyses that help to validate the accuracy and precision of the calibration.

MSL Mastcam; quantitative multispectral↗
DOE OSTI2020

FPGA-based tracking for the CMS Level-1 trigger using the tracklet algorithm

The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High-Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware based trigger system. There are many challenges involved in achieving this: a large input data rate of about 20–40 Tb/s; processing a new batch of input data every 25 ns, each consisting of about 15,000 precise position measurements and rough transverse momentum measurements of particles (“stubs”); performing the pattern recognition on these stubs to find the trajectories; and producing the list of trajectory parameters within 4 µs. Here, this paper describes a proposed solution to this problem, specifically, it presents a novel approach to pattern recognition and charged particle trajectory reconstruction using an all-FPGA solution. The results of an end-to-end demonstrator system, based on Xilinx Virtex-7 FPGAs, that meets timing and performance requirements are presented along with a further improved, optimized version of the algorithm together with its corresponding expected performance.

47 OTHER INSTRUMENTATION↗
NASA NTRS2008

Validation of SO2 Retrievals from the Ozone Monitoring Instrument over NE China

The Dutch-Finnish Ozone Monitoring Instrument (OMI) launched on the NASA Aura satellite in July 2004 offers unprecedented spatial resolution, coupled with contiguous daily global coverage, for space-based UV measurements of sulfur dioxide (SO2). We present a first validation of the OMI SO2 data with in situ aircraft measurements in NE China in April 2005. The study demonstrates that OMI can distinguish between background SO2 conditions and heavy pollution on a daily basis. The noise (expressed as the standard deviation,sigma) is approximately 1.5 DU (Dobson units; 1 DU = 2.69 10 (exp 16) molecules/cm (exp 2)) for instantaneous field of view boundary layer (PBL) SO2 data. Temporal and spatial averaging can reduce the noise to sigma approximetly 0.3 DU over a remote region of the South Pacific; the long-term average over this remote location was within 0.1 DU of zero. Under polluted conditions collection 2 OMI data are higher than aircraft measurements by a factor of two. Improved calibrations of the radiance and irradiance data (collection 3) result in better agreement with aircraft measurements on polluted days. The air mass corrected collection 3 data still show positive bias and sensitivity to UV absorbing aerosols. The difference between the in situ data and the OMI SO2 measurements within 30 km of the aircraft profiles was about 1 DU, equivalent to approximately 5 ppb from 0 to 3000 m altitude. Quantifying the SO2 and aerosol profiles and spectral dependence of aerosol absorption between 310 and 330 nm are critical for an accurate estimate of SO2 from satellite UV measurements.

Krotkov, Nickolay A.↗
NASA NTRS2019

A New Approach to Model Delamination Growth in Fatigue Using the Virtual Crack Closure Technique Without Re-Meshing

A modeling approach is proposed to simulate delamination propagation in fatigue that combines the Virtual Crack Closure Technique (VCCT) with a progressive nodal release strategy. The progressive nodal release alleviates the artificial stress concentrations found when using the VCCT with instantaneous release to model 3D delamination without re-meshing. This enables crack shapes that do not conform to the underlying mesh to be readily simulated. The progressive release is formulated such that no artificial growth or healing occurs as a result of a change in loading conditions. Furthermore, expressions for calculating energy release rates at partially released nodes are proposed and applied to arbitrarily shaped delamination fronts. The shape of the delamination front is considered explicitly in the energy release rate calculations, and is determined by considering the normalized crack positions associated with the partial nodal release. Contrary to previous implementations, the local delamination propagation direction is not assumed to follow mesh lines, but instead is computed as part of the iterative procedure proposed to determine the maximum energy release along the crack front. The results obtained suggest the approach can accurately simulate Mode I, Mixed Mode I/II and Mode II fatigue delamination growth and be used to simulate growth of arbitrarily shaped cracks that do not conform to the underlying mesh.

N V De Carvalho↗
NASA NTRS1997

A Survey of Large-Scale Variations in Thermospheric Oxygen Column Density with Magnetic Activity as Inferred from Observations of the FUV Dayglow

Brightness of the terrestrial far-ultraviolet (FUV) dayglow is dominated by the 130.4-nm emission of neutral atomic oxygen, OI, and variations in the brightness observed from altitudes high above the emitting region reflect variations in thermospheric oxygen density. This paper summarizes the results of an initial survey of the Dynamics Explorer 1 observations of the FUV dayglow through a presentation of 13 representative events selected to demonstrate the spatial extent and short-term temporal stability of the brightness perturbations. The emphasis here is on the morning sector of local time and the polar cap for observations obtained in the time interval from September 23, 1981, through January 19, 1982. An analytic expression is derived for the average response of the FUV photometer to the dayglow during periods of high-latitude magnetic quiescence. The remaining observations in this time interval are then analyzed for their deviations from the established quiet time values. Deviations of -40% to +30% are found following intervals of increased magnetic activity. The most significant decreases (-30% to -40%) are observed equatorward of the instantaneous aurora] oval only after sustained periods (approx. 6 hours) of intense magnetic activity (average AE greater than approx. 700 nT). Decreases extend equatorward from the aurora to geographic latitudes as low as approx. 30 deg N. Decreases of lesser magnitude that do not extend as far equatorward are associated with sustained periods of more moderate activity in which the average value of AE is smaller (approx. 300-400 nT). Also, the spatial extent and magnitude of the decreases in the morning sector appear greater when the IMF B(sub y) component is positive. In both cases, decreases are readily observed within the polar cap. Localized enhancements of +20% to +30% occur much less frequently and are detected at the middle latitudes, well equator-ward of the auroral oval.

Nicholas, A. C.↗
DOE OSTI2023

A Refined Understanding of the Ice Cloud Longwave Scattering Effects in Climate Model

Abstract Because longwave (LW) absorption by greenhouse gases and clouds is more significant than the LW scattering effect by clouds, most climate models neglect cloud LW scattering to save computational costs. Ignoring cloud LW scattering directly overestimates outgoing longwave radiation (OLR). This study included ice‐cloud LW scattering treatment in the Exascale Energy Earth System Model (E3SM) version 2 and ran fully‐coupled simulations, prescribed sea surface temperature simulations, and offline radiative transfer calculations to comprehensively assess the impact of ice‐cloud LW scattering on global climate simulation. The instantaneous effect due to ice‐cloud LW scattering reduces the OLR by ∼1 W/m 2 on the global average and 2 W/m 2 on the tropical average. Tropospheric warming and high cloud amount reduction act to partially compensate for such instantaneous OLR reduction caused by the inclusion of LW scattering. When the simulation reaches the equilibrium, the surface warms by 0.66 K on average with respect to the simulation without LW scattering, with the Arctic surface temperature differences more than twice as large as that of the global mean. The impact of including LW scattering on the simulated climate change in response to 4 × CO 2 is also assessed. While including the cloud LW scattering does not significantly modify radiative forcing and total radiative feedback under such a scenario, it results in a 10% more positive cloud feedback.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1995

Nearly sonic and transsonic convective motions in the solar atmosphere related to the solar wind origin

MHD equations are considered for the solar atmosphere. 15 different simplest MHD regimes are indicated for the momentum transport equation depending on the mutual binary interplay between 6 possible and locally dominant terms: non-stationarity and inhomogeneity of the flow, gas pressure, magnetic tensions, viscous and gravity forces. These regimes are delimited by five physically independent dimensionless parameters, for example, Strouhal, sonic Mach, alfvenic Mach, Reynolds and Froude numbers or their combinations. Another partially overlapping classification of the simplest regimes may be introduced based on the energy conservation equation. There are also 15 independent binary combinations between nonstationary and inhomogeneous convective terms, dissipative energy sinks and sources (viscous, heat-conductive, Joule and radiative ones) in the energy equation. More complicated regimes are considered with multiple dominated terms. All these MHD regimes play their important role somewhere in the solar atmosphere complicated by the tensor transport coefficients in the magnetically dominated regions of the upper atmosphere. Nearly sonic and transsonic nonstationary convective motions with ascending and descending flows are observed in the solar chromosphere. the transition region and the lower pans of the solar corona together with related horizontal velocity components. This convection represents a kind of the 'cocoonery' manufacturing nonstationary vortices generated here and partially connected to the photosphere and to the solar wind. The solar wind originates from this powerful transsonic muddle in the solar atmosphere as a tiny fraction of the streamlines which are temporarily getting detached from the 'cocoons; and going to the infinity. The topologically complicated instantaneous 'runaway surface' around the Sun, i.e., the surface which separates outgoing to the infinity streams from other finite flows in the solar atmosphere was not described in the literature and needs additional investigation. We conclude that a simple one-connected smooth and quasistationary 'critical surface' which is often supposed to be placed somewhere in the solar corona (say, at 4 solar radii) in reality does not exist. Observational and theoretical arguments favor instead of this a highly structured, disordered, patched and time-dependent sonic transition surface in the solar atmosphere permanently fluctuating at positional dependent heights starting sometimes from photospheric (and maybe subphotospheric) levels and more frequently from the chromosphenc network up to several solar radii in the solar corona.

Veselovsky, I. S.↗
NASA NTRS1968

Data Acquisition and Prompt Analysis System for High Altitude Balloon Experiments

An inexpensive and simple data acquisition system has been developed for balloon borne experiments and has been tested with a gamma ray detector in a balloon flight launched from Palestine, Texas. The detector used for the test consisted of an NaI(T1) scintillation crystal encased in a 1/8 in. plastic scintillator-charged particle shield. The combination was viewed by a single photomultiplier and charged particle gating was accomplished by a conventional phoswich discriminator. The pulse height analysis of the NaI events, not associated with prompt charged particle interactions, is accomplished by converting to a time spectrum using an airborne height to time converter. A range of pulse widths from 5 microseconds to 250 microseconds corresponds to energy losses in NaI from 100 to 1000 keV. The time spectrum information, along with charged particle events and barometric pressure, is fed to a mixer which modulates a 252.4 Mc FM transmitter. The original scintillator spectrum is recovered on the ground utilizing conversion circuitry at the receiver video output and a 128 channel commercial pulse height analyzer. The charged particle events of standard time width are stored with the spectrum at a fixed channel position and are therefore represented by a sharp line riding on the lower part of the NaI energy loss spectrum. An energy loss greater than 1000 keV is presented by the maximum pulse width of the converter and stored in the last analyzer channel. Barometric pressure data is transmitted by low frequency modulation of the sme FM carrier. In flight operation, the receiver video output can be recorded on a wide band tape recorder and simultaneously analyzed by the 128 channel analyzer, or the telemetered data can be analyzed later. The flight system features high pulse resolution, essentially instantaneous time response, high data rate, and flexibility; and is of modest cost. A detailed description of the system and operating performance is discussed.

Sarkady, A. A.↗
NASA NTRS2013

Trip-Induced Transition Measurements in a Hypersonic Boundary Layer Using Molecular Tagging Velocimetry

Measurements of mean streamwise velocity, fluctuating streamwise velocity, and instantaneous streamwise velocity profiles in a hypersonic boundary layer were obtained over a 10-degree half-angle wedge model. A laser-induced fluorescence-based molecular tagging velocimetry technique was used to make the measurements. The nominal edge Mach number was 4.2. Velocity profiles were measured both in an untripped boundary layer and in the wake of a 4-mm diameter cylindrical tripping element centered 75.4 mm downstream of the sharp leading edge. Three different trip heights were investigated: k = 0.53 mm, k = 1.0 mm and k = 2.0 mm. The laminar boundary layer thickness at the position of the measurements was approximately 1 mm, though the exact thickness was dependent on Reynolds number and wall temperature. All of the measurements were made starting from a streamwise location approximately 18 mm downstream of the tripping element. This measurement region continued approximately 30 mm in the streamwise direction. Additionally, measurements were made at several spanwise locations. An analysis of flow features show how the magnitude, spatial location, and spatial growth of streamwise velocity instabilities are affected by parameters such as the ratio of trip height to boundary layer thickness and roughness Reynolds number. The fluctuating component of streamwise velocity measured along the centerline of the model increased from approximately 75 m/s with no trip to +/-225 m/s with a 0.53-mm trip, and to +/-240 m/s with a 1-mm trip, while holding the freestream Reynolds number constant. These measurements were performed in the 31-inch Mach 10 Air Tunnel at the NASA Langley Research Center.

Bathel, Brett F.↗
NASA NTRS1985

Particle and field stress balance within a planetary magnetosphere

A technique is developed for experimentally estimating the local tensor stresses within a planetary magnetic field configuration characterized by local spacecraft measurements. Key to the technique is the determination of the shapes of field lines using the symmetry properties of the system coupled with local and instantaneous measurements of the field line inclination angles. The technique is applied here to the inner and middle Saturnian magnetosphere using data returned by the Magnetic Field Experiment on the Voyager 1 spacecraft. It is concluded that the ring current has substantial radial structure, heretofore not shown. Outside about 13 R(s) the newly derived field stresses match remarkably well the funtional variation of the centrifugal corotation stresses of the cool particle population measured previously by the Plasma Science Experiment. Inside about 13 R(s) the key structure in the derived field stresses, a prominent local maximum, matches the approximate position of an apparent strong pressure gradient in the energetic particles characterized by the Low-Energy Charged Particle detectors.

Mauk, B. H.↗
NASA NTRS2007

Delta-Doped CCDs as Detector Arrays in Mass Spectrometers

In a conventional mass spectrometer, charged particles (ions) are dispersed through a magnetic sector onto an MCP at an output (focal) plane. In the MCP, the impinging charged particles excite electron cascades that afford signal gain. Electrons leaving the MCP can be read out by any of a variety of means; most commonly, they are post-accelerated onto a solid-state detector array, wherein the electron pulses are converted to photons, which, in turn, are converted to measurable electric-current pulses by photodetectors. Each step in the conversion from the impinging charged particles to the output 26 NASA Tech Briefs, February 2007 current pulses reduces spatial resolution and increases noise, thereby reducing the overall sensitivity and performance of the mass spectrometer. Hence, it would be preferable to make a direct measurement of the spatial distribution of charged particles impinging on the focal plane. The utility of delta-doped CCDs as detectors of charged particles was reported in two articles in NASA Tech Briefs, Vol. 22, No. 7 (July 1998): "Delta-Doped CCDs as Low-Energy-Particle Detectors" (NPO-20178) on page 48 and "Delta- Doped CCDs for Measuring Energies of Positive Ions" (NPO-20253) on page 50. In the present developmental miniature mass spectrometers, the above mentioned miniaturization and performance advantages contributed by the use of delta-doped CCDs are combined with the advantages afforded by the Mattauch-Herzog design. The Mattauch- Herzog design is a double-focusing spectrometer design involving an electric and a magnetic sector, where the ions of different masses are spatially separated along the focal plane of magnetic sector. A delta-doped CCD at the focal plane measures the signals of all the charged-particle species simultaneously at high sensitivity and high resolution, thereby nearly instantaneously providing a complete, high-quality mass spectrum. The simultaneous nature of the measurement of ions stands in contrast to that of a scanning mass spectrometer, in which abundances of different masses are measured at successive times.

Nikzad, Shouleh↗
DOE OSTI2023

Direct observation of tRNA-chaperoned folding of a dynamic mRNA ensemble

T-box riboswitches are multi-domain noncoding RNAs that surveil individual amino acid availabilities in most Gram-positive bacteria. T-boxes directly bind specific tRNAs, query their aminoacylation status to detect starvation, and feedback control the transcription or translation of downstream amino-acid metabolic genes. Most T-boxes rapidly recruit their cognate tRNA ligands through an intricate three-way stem I-stem II-tRNA interaction, whose establishment is not understood. Using single-molecule FRET, SAXS, and time-resolved fluorescence, we find that the free T-box RNA assumes a broad distribution of open, semi-open, and closed conformations that only slowly interconvert. tRNA directly binds all three conformers with distinct kinetics, triggers nearly instantaneous collapses of the open conformations, and returns the T-box RNA to their pre-binding conformations upon dissociation. This scissors-like dynamic behavior is enabled by a hinge-like pseudoknot domain which poises the T-box for rapid tRNA-induced domain closure. This study reveals tRNA-chaperoned folding of flexible, multi-domain mRNAs through a Venus flytrap-like mechanism.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2022

Modeling Meteoroid Impacts on the Juno Spacecraft

Events which meet certain criteria from star-tracker images on board the Juno spacecraft have been proposed to be due to interplanetary dust particle impacts on its solar arrays. These events have been suggested to be caused by particles with diameters larger than 10 μm. Here, we compare the reported event rates to expected dust-impact rates using dynamical meteoroid models for the four most abundant meteoroid/dust populations in the inner solar system. We find that the dust-impact rates predicted by dynamical meteoroid models are not compatible with either the Juno observations in terms of the number of star-tracker events per day, or with the variations of dust flux on Juno's solar panels with time and position in the solar system. For example, the rate of star-tracker events on Juno's antisunward surfaces is the largest during a period in which Juno is expected to experience the peak impact fluxes on the opposite, sunward hemisphere. We also investigate the hypothesis of dust leaving the Martian Hill sphere originating either from the surface of Mars itself or from one of its moons. We do not find such a hypothetical source to be able to reproduce the star-tracker event-rate variations observed by Juno. We conclude that the star-tracker events observed by Juno are unlikely to be the result of instantaneous impacts from the zodiacal cloud.

Interplanetary dust↗