Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Freestanding high-aspect-ratio gold masks for low-energy, phase-based x-ray microscopy

High-resolution, x-ray phase contrast microscopy, a key technique with promising potential in biomedical imaging and diagnostics, is based on narrow-slit high-aspect-ratio gold gratings. Here we present the development, fabrication details, and experimental testing of the freestanding 10 μm thick gold membrane masks with an array of 0.9–1.5 μm void slit apertures for a novel low-energy x-ray microscope. The overall mask size is 4 mm × 4 mm, with a grating pitch of 7.5 μm, 6.0–6.6 μm wide gold bars are supported by 3 μm wide crosslinks at 400 μm intervals. The fabrication process is based on gold electroplating into a silicon mold coated with various thin films to form a voltage barrier, plating base, and sacrificial layer, followed by the mold removal to obtain the freestanding gold membrane with void slit apertures. We discuss key aspects for the materials and processes, including gold structures homogeneity, residual stresses, and prevention of collapsing of the grid elements. We further demonstrate the possibility to obtain high-resolution, high contrast 2D images of biological samples using an incoherent, rotating anode x-ray tube.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and temperature coefficient of resistance of thin cermet resistor films deposited from CrSi{sub 2}-Cr-SiC targets by S-gun magnetron

Technological solutions for producing nanoscale cermet resistor films with sheet resistances above 1000 {Omega}/{open_square} and low temperature coefficients of resistance (TCR) have been investigated. 2-40 nm thick cermet films were sputter deposited from CrSi{sub 2}-Cr-SiC targets by a dual cathode dc S-gun magnetron. In addition to studying film resistance versus temperature, the nanofilm structural features and composition were analyzed using scanning electron microscopy, atomic force microscopy, high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, and electron energy loss spectroscopy. This study has revealed that all cermet resistor films deposited at ambient and elevated temperatures were amorphous. The atomic ratio of Si to Cr in these films was about 2 to 1. The film TCR displayed a significant increase when the deposited film thickness was reduced below 2.5 nm. An optimized sputter process consisting of wafer degassing, cermet film deposition at elevated temperature with rf substrate bias, and a double annealing in vacuum, consisting of in situ annealing following the film sputtering and an additional annealing following the exposure of the wafers to air, has been found to be very effective for the film thermal stabilization and for fine tuning the film TCR. Cermet films with thicknesses in the range of 2.5-4 nm deposited using this technique had sheet resistances ranging from 1800 to 1200 {Omega}/{open_square} and TCR values from -50 ppm/ deg. C to near zero, respectively. A possible mechanism responsible for the high efficiency of annealing the cermet films in vacuum (after preliminary exposure to air), resulting in resistance stabilization and TCR reduction, is also discussed.

36 MATERIALS SCIENCE↗

Giant Domain Wall Conductivity in Self‐Assembled BiFeO 3 Nanocrystals

Abstract Ever‐increasing demand on electronic devices with ultrahigh‐density non‐volatile data storage has attracted great interest in novel ferroelectric memories based on conductive ferroelectric domain walls. Embedded in an insulating material, ferroelectric domain walls have the capability of being (re)created, displaced, erased, and altered in their spatial configurations and electronic characteristics. However, the domain wall conductivities are in most cases not yet sufficiently high to ensure the current density required to drive read‐out circuits operating at high speeds. In this work, a giant domain wall current (>10 µA) of a single charged domain wall is obtained through conductive atomic force microscopy with a bias field of 4 V. This is achieved in self‐assembled BiFeO 3 nanocrystals grown by sol‐gel method on Nb‐doped SrTiO 3 substrates. Local configurations of domains and domain wall types are studied using vector piezoresponse force microscopy and high‐resolution transmission electronic microscopy. The enhancement of the wall current is shown to be due to the formation of conducting pathways of charged defects accumulated along domain walls and traversing the nanocrystals. The diverse domain walls can be manipulated by electric field in a perpendicular architecture. The perpendicular array structure of BiFeO 3 nanocrystals should have great potentials for developing perpendicular nanoelectronic prototypes.

Liu, Lisha↗

Size‐Tunable Synthesis of Hollow Gold Nanospheres through Control of Reaction Temperature

Here, it is demonstrated that the size tunable hollow gold nanospheres (HGNs) of ≈24–122 nm in diameter can be facilely achieved by controlling a signal parameter, reaction temperature, in the synthesis. The varied particle sizes of HGNs result in highly tunable surface plasmon resonance (SPR) absorption in the entire visible to near infrared region of the spectrum, with maximum peak position from 565 to 850 nm when the reaction temperature is varied from 80 to 10 °C. The particle size and structural properties are determined using dynamic light scattering, transmission‐mode scanning electron microscopy, and high‐resolution transmission electron microscopy. The optical properties are characterized using UV–vis spectroscopy. A mechanism behind the temperature‐dependent HGN synthesis is explained by the thermodynamics of homogeneous nuclei formation of the cobalt scaffold. Discrete dipole approximation calculations are performed to simulate the SPR spectrum and provide insight into the relation between the SPR absorption and structural details of the HGNs. This study demonstrates a simple yet effective method based on temperature control for synthesizing produce size tunable HGNs with varying properties of interest for different applications.

Pu, Ying‐Chih↗

From Futile to Fruitful: Diesel Soot as White Light Emitter

The present work describes a solution for the effective use of the hazardous particulate matter (diesel soot) from the internal combustion engines (ICEs) as a potential material emitting white light for white light emitting diodes (WLEDs). The washed soot samples are subjected to Field Emission Scanning Electron Microscopy (FESEM), High- Resolution Transmission Electron Microscopy (HR-TEM), Energy Dispersive Spectroscopy (EDS), UV–Visible, Photoluminescent (PL) Spectroscopy and quantum yield measurements. The CIE plot and Correlated Color Temperature (CCT) reveals the white fluorescence on photoexcitation. The sample on ultraviolet (UV) laser excitation, provides a visual confirmation of white light emission from the sample. The diesel soot collected from public transport buses of different years of manufacture invariably exhibit white fluorescence at an excitation of 350 nm. The sample show a quantum yield of 47.09%. The study is significant in the context of pollution and search for low-cost, rare-earth phosphor free material for white light emission and thereby turning the hazardous, futile material into a fruitful material that can be used for potential applications in photonics and electronics.

74 ATOMIC AND MOLECULAR PHYSICS↗

Investigation of the Effect of Residual Stress Gradient on the Wear Behavior of PVD Thin Films

The control of residual stresses has been seldom investigated in multilayer coatings dedicated to improvement of wear behavior. Here, we report the preparation and characterization of superposed structures composed of Cr, CrN and CrAlN layers. Nano-multilayers CrN/CrAlN and Cr/CrN/CrAlN were deposited by Physical Vapor Deposition (PVD) onto Si (100) and AISI4140 steel substrates. The Cr, CrN and CrAlN monolayers were developed with an innovative approach in PVD coatings technologies corresponding to deposition with different residual stresses levels. Composition and wear tracks morphologies of the coatings were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and 3D-surface analyzer. The mechanical properties (hardness, residual stresses and wear) were investigated by nanoindentation, interferometry and micro-tribometry (fretting-wear tests). Observations suggest that multilayer coatings are composed mostly of nanocrystalline. The residual stresses level in the films has practically affected all the physicochemical and mechanical properties as well as the wear behavior. Consequently, it is demonstrated that the coating containing moderate stresses has a better wear behavior compared to the coating developed with higher residual stresses. The friction contact between coated samples and alumina balls shows also a large variety of wear mechanisms. In particular, the abrasive wear of the coatings was a combination of plastic deformation, fine microcracking and microspallation. The application of these multilayers will be wood machining of green wood.

36 MATERIALS SCIENCE↗

Organic Dye Degradation Under Solar Irradiation by Hydrothermally Synthesized ZnS Nanospheres

The green synthesis of ZnS nanospheres using Citrus limetta (sweet lime) juice as a capping agent through a conventional hydrothermal method was studied. The particle size, morphology, chemical composition, band gap, and optical properties of the synthesized ZnS nanospheres were characterized using x-ray diffraction spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, and ultraviolet–visible spectroscopy. The photocatalytic activity of the ZnS nanospheres was evaluated by degradation of rhodamine B (RhB) and methyl orange (MO) under solar irradiation. Upon 150 min of solar irradiation, the extent of degradation was 94% and 77% for RhB and MO, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Supplementing zinc oxide nanoparticles to cryopreservation medium minimizes the freeze-thaw-induced damage to spermatozoa

The sperm DNA integrity post cryopreservation of human semen samples is one of the serious concerns in human infertility treatment. In the present study, the beneficial effects of zinc oxide nanoparticles in preserving the functional ability of spermatozoa was explored. Ejaculates of normozoospermic men cryopreserved along with Zinc oxide nanoparticles (ZnONPs) exhibited non-significantly higher percentage of total and progressive motility in frozen-thawed samples compared to control. The sperm chromatin damage and malondialdehyde (MDA) level was significantly lower in ZnONPs group (P P < 0.05 respectively) and the spermatozoa's ability to undergo acrosome reaction was also unaltered. Fluorescence microscopy and High resolution transmission electron microscopy analysis demonstrated that the ZnONPs do not penetrate the membrane of spermatozoa but stay around the spermatozoa. In conclusion, the presence of ZnONPs during cryopreservation appears to be beneficial to the spermatozoa as they withstand freeze-thaw process competently better than control, without any adverse effect shown.

60 APPLIED LIFE SCIENCES↗

Improved electrochemical and thermal performances of layered Li[Li 0.2 Ni 0.17 Co 0.07 Mn 0.56 ]O 2 via Li 2 ZrO 3 surface modification

We successfully coated a conductive Li 2 ZrO 3 layer on the surface of Li-rich layered cathode Li[Li 0.2 Ni 0.17 Co 0.07 Mn 0.56 ]O 2 in order to enhance its electrochemical performances. For the crystal structures, electrochemical properties and thermal stabilities of the bare and coated materials are studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), electron diffraction spectroscopy (EDS), inductively coupled plasma (ICP), galvanostatic cycling, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). We found that the electrochemical performances of Li-rich cathode material are obviously improved by Li 2 ZrO 3 surface modification. Especially, the 1 wt.% Li 2 ZrO 3 -coated material demonstrates the best cycling performance, with capacity retention of 89% after 50 cycles, much better than that of the pristine one, 64%. Intensive explorations indicate that the improved electrochemical properties can be attributed to the Li 2 ZrO 3 surface layer, which not only stabilizes the cathode structure by decreasing the loss of oxygen, but also protects the Li-rich cathode material from side reaction(s) with the electrolyte and thus suppressing the fast growth of solid electrolyte interface (SEI) film on the surface of oxide particles.

25 ENERGY STORAGE↗

Helical polyurethane-attapulgite nanocomposite: Preparation, characterization and study of optical activity

Helical polyurethane-attapulgite (BM-ATT) based on R-1,1'-binaphthyl-2',2-diol (R-BINOL) composite was prepared after the surface modification of attapulgite (ATT). BM-ATT was characterized by Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HTEM) and vibrational circular dichroism (VCD) spectroscopy. FT-IR and XRD analyses indicate that the helical polyurethane has been successfully grafted onto the surfaces of the modified ATT without destroying the original crystalline structure of ATT. BM-ATT exhibits the rod-like structure by SEM, TEM, and HTEM photographs. BM-ATT displays obvious Cotton effect for some absorbance in VCD spectrum, and its optical activity results from the singlehanded conformation of helical polyurethane. - Graphical Abstract: Helical polyurethane-attapulgite (BM-ATT) based on R-1,1'-binaphthyl-2',2-diol (R-BINOL) nanocomposite was prepared after surface modification of attapulgite (ATT). This rod-like composite is coated by the optically active polyurethane shell on the surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mn{sub 3}O{sub 4} nanoplates and nanoparticles: Synthesis, characterization, electrochemical and catalytic properties

Mn{sub 3}O{sub 4} hexagonal nanoplates and nanoparticles were synthesized via a solvent-assisted hydrothermal oxidation process at low temperature and a solvothermal oxidation method, respectively. The synthesized product was characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), electron diffraction (ED), Fourier transform infrared (FT-IR) spectroscopy. Their capability of catalytic oxidation of formaldehyde to formic acid at room temperature and atmospheric pressure and electrochemical properties by cyclic voltammogram (CV) were compared. The results showed that Mn{sub 3}O{sub 4} hexagonal nanoplate is a better catalyst, and the hexagonal nanoplates and nanoparticles modified electrodes blended with carbon black have a higher specific capacitance. - Graphical abstract: Mn{sub 3}O{sub 4} hexagonal nanoplates and nanoparticles were synthesized via a solvent-assisted hydrothermal oxidation process at low temperature and a solvothermal oxidation method, respectively. Their capability of catalytic oxidation of aldehyde at room temperature and atmospheric pressure and electrochemical properties by cyclic voltammogram were compared.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

New perovskite-based manganite Pb{sub 2}Mn{sub 2}O{sub 5}

A new perovskite based compound Pb{sub 2}Mn{sub 2}O{sub 5} has been synthesized using a high pressure high temperature technique. The structure model of Pb{sub 2}Mn{sub 2}O{sub 5} is proposed based on electron diffraction, high angle annular dark field scanning transmission electron microscopy and high resolution transmission electron microscopy. The compound crystallizes in an orthorhombic unit cell with parameters a=5.736(1) A{approx}{radical}2a{sub p}, b=3.800(1) A{approx}a{sub p}, c=21.562(6) A{approx}4{radical}2a{sub p} (a{sub p}-the parameter of the perovskite subcell) and space group Pnma. The Pb{sub 2}Mn{sub 2}O{sub 5} structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110]{sub p}(101){sub p} crystallographic shear planes. The blocks are connected to each other by chains of edge-sharing MnO{sub 5} distorted tetragonal pyramids. The chains of MnO{sub 5} pyramids and the MnO{sub 6} octahedra of the perovskite blocks delimit six-sided tunnels accommodating double chains of Pb atoms. The tunnels and pyramidal chains adopt two mirror-related configurations ('left' L and 'right' R) and layers consisting of chains and tunnels of the same configuration alternate in the structure according to an -L-R-L-R-sequence. The sequence is sometimes locally violated by the appearance of -L-L- or -R-R-fragments. A scheme is proposed with a Jahn-Teller distortion of the MnO{sub 6} octahedra with two long and two short bonds lying in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern. - Graphical abstract: Order of the Jahn-Teller distorted MnO{sub 6} octahedra in Pb{sub 2}Mn{sub 2}O{sub 5}. Two long and two short bonds lie in the a-c plane, along two perpendicular orientations within this plane, forming a d-type pattern.

36 MATERIALS SCIENCE↗

Effect of organic solvents on particle size of Mn{sub 3}O{sub 4} nanoparticles synthesized by a solvothermal method

In this paper, a modified simple solvothermal method is employed to synthesize Mn{sub 3}O{sub 4} nanocrystals using four different solvents: acetone, ethanol, N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO). Mn{sub 3}O{sub 4} nanoparticles with a tetragonal hausmannite nano-structure are characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), as well as superconducting quantum interference device magnetometer (SQUID). The Mn{sub 3}O{sub 4} particle size is found to have a strong dependency on the solvent used. A reaction scheme is proposed to understand this dependency, suggesting that the solvent coordinating capability has a critical effect on Mn{sub 3}O{sub 4} particle size. The stronger the coordinating capability of the solvent is, the smaller the Mn{sub 3}O{sub 4} particle size is. In addition, magnetic properties of the nano-structured Mn{sub 3}O{sub 4} are also tested and discussed. - Graphical abstract: The comparison of the particle size of Mn{sub 3}O{sub 4} nanoparticles synthesized using different solvents and HRTEM image of Mn{sub 3}O{sub 4} individual nanoparticle revealed its single-crystal nature. - Highlights: • Mn{sub 3}O{sub 4} nanocrystals were synthesized using different solvents by a solvothermal method. • The particle size of Mn{sub 3}O{sub 4} nanocrystal is found to have a strong dependency on the solvent used. • A reaction mechanism is proposed to explain the difference of particle size of Mn{sub 3}O{sub 4} nanocrystals. • Magnetic properties of Mn{sub 3}O{sub 4} nanocrystals with different particle size are tested and compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of GaN nanowires on Pd-coated sapphire substrates by magnetron sputtering technique

Large-scale GaN nanowires were successfully synthesized through ammoniating Ga{sub 2}O{sub 3}/Pd films sputtered on the sapphire(001) substrates. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, photoluminescence and Raman spectrum were used to characterize the specimens. The results demonstrate that nanowires are single crystal with hexagonal wurtzite structure and have good optical properties. Raman scattering appears broadened and asymmetric compared with those of bulk GaN due to its polycrystalline nature. In addition, the growth mechanism of GaN nanowires is briefly discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of NiO nanoparticles by thermal decomposition of nickel linoleate and their optical properties

Well dispersed nickel oxide nanoparticles have been synthesized successfully by direct calcination of nickel linoleate. The structure, morphology and properties of the nanoparticles were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and ultraviolet-visible spectroscopy. Transmission electron microscopic studies show that nickel oxide nanoparticles are uniform with an average size of 14-20 nm. The optical band gap of 3.8 eV is obtained using UV-Visible spectroscopy which exhibits the red shift compared with the bulk counterpart. - Highlights: Black-Right-Pointing-Pointer Synthesis of metal oxide nanoparticles by using metal complexes as precursors. Black-Right-Pointing-Pointer Characterization of isolated nanoparticles using XRD, FTIR, SEM, TEM and HRTEM data. Black-Right-Pointing-Pointer The expected optical properties of these nanoparticles are clarified.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of milling time and CNT concentration on hardness of CNT/Al{sub 2024} composites produced by mechanical alloying

Carbon nanotube/2024 aluminum alloy (CNT/Al{sub 2024}) composites were fabricated with a combination of mechanical alloying (MA) and powder metallurgy routes. Composites were microstructurally and mechanically evaluated at sintering condition. A homogeneous dispersion of CNTs in the Al matrix was observed by a field emission scanning electron microscopy. High-resolution transmission electron microscopy confirmed not only the presence of well dispersed CNTs but also needle-like shape aluminum carbide (Al{sub 4}C{sub 3}) crystals in the Al matrix. The formation of Al{sub 4}C{sub 3} was suggested as the interaction between the outer shells of CNTs and the Al matrix during MA process in which crystallization took place after the sintering process. The mechanical behavior of composites was evaluated by Vickers microhardness measurements indicating a significant improvement in hardness as function of the CNT content. This improvement was associated to a homogeneous dispersion of CNTs and the presence of Al{sub 4}C{sub 3} in the aluminum alloy matrix. - Highlights: Black-Right-Pointing-Pointer The 2024 aluminum alloy was reinforced by CNTs by mechanical alloying process. Black-Right-Pointing-Pointer Composites were microstructural and mechanically evaluated after sintering condition. Black-Right-Pointing-Pointer The greater the CNT concentration, the greater the hardness of the composites. Black-Right-Pointing-Pointer Higher hardness in composites is achieved at 20 h of milling. Black-Right-Pointing-Pointer The formation of Al{sub 4}C{sub 3} does not present a direct relationship with the milling time.

36 MATERIALS SCIENCE↗

Effect of reinforcing particle type on morphology and age-hardening behavior of Al–4.5 wt.% Cu based nanocomposites synthesized through mechanical milling

The effects of reinforcing particle type (SiC and TiC) on morphology and precipitation hardening behavior of Al–4.5%Cu based nanocomposites synthesized via mechanical milling were investigated in the current work. In order to study the microstructure and morphology of mechanically milled powder, X-ray diffraction technique, scanning electron microscopy and high resolution transmission electron microscopy were utilized. Results revealed that at the early stages of mechanical milling, when reinforcing particles are polycrystal, the alloying process is enhanced more in the case of using the TiC particles as reinforcement. But, at the final stages of mechanical milling, when reinforcing particles are single crystal, the alloying process is enhanced more in the case of using the SiC ones. Transmission electron microscopy results demonstrated that Al–4.5 wt.%Cu based nanocomposite powders were synthesized and confirmed that the mutual diffusion of aluminum and copper occurs through the interfacial plane of (200). The hardness results showed that not only does introducing 4 vol.% of reinforcing particles (SiC or TiC) considerably decrease the porosity of the bulk composite samples, but also it approximately doubles the hardness of Al–4.5 wt.%Cu alloy (53.4 HB). Finally, apart from TEM and scanning electron microscopy observation which are localized, a decline in hardness in the TiC and SiC contained samples, respectively, after 1.5 and 2 h aging time at 473 K proves the fact that the size of SiC particles is smaller than the size of the TiC ones. - Highlights: ► HRTEM results show mutual diffusion of Al and Cu occurs through the (200) planes. ► TiC particles enhance alloying process more than the SiC ones at the early stages of MM. ► SiC particles enhance alloying process more than the TiC ones at the final stages of MM.

36 MATERIALS SCIENCE↗