Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluid flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Simulation of Fluid Flow and Collection Efficiency for an SEA Multi-element Probe

Numerical simulations of fluid flow and collection efficiency for a Science Engineering Associates (SEA) multi-element probe are presented. Simulation of the flow field was produced using the Glenn-HT Navier-Stokes solver. Three-dimensional unsteady results were produced and then time averaged for the heat transfer and collection efficiency results. Three grid densities were investigated to enable an assessment of grid dependence. Simulations were completed for free stream velocities ranging from 85-135 meters per second, and free stream total pressure of 44.8 and 93.1 kilopascals (6.5 and 13.5 pounds per square inch absolute). In addition, the effect of angle of attack and yaw were investigated by including 5 degree deviations from straight for one of the flow conditions. All but one of the cases simulated a probe in isolation (i.e. in a very large domain without any support strut). One case is included which represents a probe mounted on a support strut within a finite sized wind tunnel. Collection efficiencies were generated, using the LEWICE3D code, for four spherical particle sizes, 100, 50, 20, and 5 micron in diameter. It was observed that a reduction in velocity of about 20% occurred, for all cases, as the flow entered the shroud of the probe. The reduction in velocity within the shroud is not indicative of any error in the probe measurement accuracy. Heat transfer results are presented which agree quite well with a correlation for the circular cross section heated elements. Collection efficiency results indicate a reduction in collection efficiency as particle size is reduced. The reduction with particle size is expected, however, the results tended to be lower than the previous results generated for isolated two-dimensional elements. The deviation from the two-dimensional results is more pronounced for the smaller particles and is likely due to the reduced flow within the protective shroud. As particle size increases differences between the two-dimensional and three dimensional results become negligible. Taken as a group, the total collection efficiency of the elements including the effects of the shroud has been shown to be in the range of 0.93 to 0.99 for particles above 20 microns. The 3D model has improved the estimated collection efficiency for smaller particles where errors in previous estimates were more significant.

Water Content↗

A comparative study of the influence of buoyancy driven fluid flow on GaAs crystal growth

An experiment on the effect of gravity-driven fluid flow on GaAs crystal growth under a variety of Earth-based conditions and in microgravity aboard the space shuttle is described. Earth-based growth is performed under stabilizing and destabilizing temperature gradients, with and without applied magnetic fields. The space growth experiment is flown in a self-contained payload container through NASA's Get Away Special program. The scope of the experiment and the experimental apparatus are outlined. Results of the Earth-based portions of the experiment are presented.

Kafales, J. A.↗

A comparative study of the influence of buoyancy driven fluid flow on GaAs crystal growth

A systematic investigation of the effect of gravity driven fluid flow on GaAs crystal growth was performed. It includes GaAs crystal growth in the microgravity environment aboard the Space Shuttle. The program involves a controlled comparative study of crystal growth under a variety of earth based conditions with variable orientation and applied magnetic field in addition to the microgravity growth. Earth based growth will be performed under stabilizing as well as destabilizing temperature gradients. The boules grown in space and on earth will be fully characterized to correlate the degree of convection with the distribution of impurities. Both macro- and micro-segregation will be determined. The space growth experiment will be flown in a self-contained payload container through NASA's Get Away Special program.

Kafalas, J. A.↗

Imaging Fluid Flow in Geothermal Wells Using Distributed Thermal Perturbation Sensing

The objective of Task 2 is to develop a numerical method for the efficient and accurate analysis of distributed thermal perturbation sensing (DTPS) data for (1) imaging flow profiles and (2) in situ determination of thermal conductivities and heat fluxes. Numerical forward and inverse modeling is employed to: (1) Examine heat and fluid flow processes near a geothermal well under heating and cooling conditions; (2) Demonstrate ability to interpret DTPS thermal profiles with acceptable estimation uncertainty using inverse modeling of synthetic temperature data; and (3) Develop template model and analysis procedure for the inversion of temperature data collected during a thermal perturbation test using fiber-optic distributed temperature sensors. This status report summarizes initial model developments and analyses.

54 ENVIRONMENTAL SCIENCES↗

Numerical analysis of complex fluid-flow systems

Very flexible computer-assisted numerical analysis is used to solve dynamic fluid-flow equations characterizing computer-controlled heat dissipation system developed for Space lab. Losses caused by bends, ties, fittings, valves, and like are easily included, and analysis can solve both steady-state and transient cases. It can also interact with parallel thermal analysis.

Holland, R. L.↗

Dual laser optical system and method for studying fluid flow

A dual laser optical system and method is disclosed for visualization of phenomena in transport substances which induce refractive index gradients such as fluid flow and pressure and temperature gradients in fluids and gases. Two images representing mutually perpendicular components of refractive index gradients may be viewed simultaneously on screen. Two lasers having wave lengths in the visible range but separated by about 1000 angstroms are utilized to provide beams which are collimated into a beam containing components of the different wave lengths. The collimated beam is passed through a test volume of the transparent substance. The collimated beam is then separated into components of the different wave lengths and focused onto a pair of knife edges arranged mutually perpendicular to produce and project images onto the screen.

Owen, R. B.↗

A fluid flow analysis for convective thermal control of flight experiments

A method for thermally analyzing convectively cooled flight experiments is presented. A three-dimensional fluid flow analysis code is used to optimize air circulation patterns and to predict air velocities in thermally critical areas. The analysis results are compared with the performance characteristics of a typical isothermal free jet, and good agreement is found between velocity profiles and radial distributions for downstream flow mixing. Predicted air velocities from the fluid analysis are used to calculate forced convection coefficients for the flight experiment, and the coefficients are used in a finite difference thermal analysis code to describe the response of air temperature and heat loss for the Lidar Atmospheric Sensing Experiment during transient flight profiles. Recommendations are made for the future design of convectively cooled flight experiments.

Killough, Brian D.↗

On stability and turbulence of fluid flows

This investigation is divided into two parts, the treatment of the stability problem of fluid flows on the one hand, and that of the turbulent motion on the other. The first part summarizes all previous investigations under a unified point of view, that is, sets up as generally as possible the conditions under which a profile possesses unstable or stable characteristics, and indicates the methods for solution of the stability equation for any arbitrary velocity profile and for calculation of the critical Reynolds number for unstable profiles. In the second part, under certain greatly idealizing assumptions, differential equations for the turbulent motions are derived and from them qualitative information about several properties of the turbulent velocity distribution is obtained.

FLOW, TURBULENT↗

Measurement of two-dimensional fluid flow by digital correlation of scattered light

Digital correlation is a pattern matching procedure. This procedure has recently been used in two-dimensional fluid flow measurements. Two images of a seeded fluid are taken and the intensity distribution of a small window in the first image is matched in the second image using a statistical correlation method. A series of structure functions have been implemented to improve the accuracy and reliability of the correlation method and new algorithms have been developed to reduce the time required for the correlation computations.

Matthys, Donald R.↗

Postseismic Rebound in Fault Step-Overs Caused by Pore Fluid Flow

Near-field strain induced by large crustal earthquakes results in changes in pore fluid pressure that dissipate with time and produce surface deformation. Synthetic Aperture Radar (SAR) interferometry revealed several centimeters of postseismic uplift in pull-apart structures and subsidence in a compressive jog along the Landers, California, 1992 earthquake surface rupture, with a relaxation time of 270 +/- 45 days. Such a postseismic rebound may be explained by the transition of the Poisson's ratio of the deformed volumes of rock from undrained to drained conditions as pore fluid flow allows pore pressure to return to hydrostatic equilibrium.

Peltzer, Gilles↗

Global Optimization Techniques for Fluid Flow and Propulsion Devices

This viewgraph presentation gives an overview of global optimization techniques for fluid flow and propulsion devices. Details are given on the need, characteristics, and techniques for global optimization. The techniques include response surface methodology (RSM), neural networks and back-propagation neural networks, design of experiments, face centered composite design (FCCD), orthogonal arrays, outlier analysis, and design optimization.

Shyy, Wei↗

Nitric oxide production by cultured human aortic smooth muscle cells: stimulation by fluid flow

This study demonstrated that exposure of cultured human aortic smooth muscle cells (SMC) to fluid flow resulted in nitric oxide (NO) production, monitored by nitrite and guanosine 3',5'-cyclic monophosphate production. A rapid burst in nitrite production rate was followed by a more gradual increase throughout the period of flow exposure. Neither the initial burst nor the prolonged nitrite production was dependent on the level of shear stress in the range of 1.1-25 dyn/cm2. Repeated exposure to shear stress after a 30-min static period restimulated nitrite production similar to the initial burst. Ca(2+)-calmodulin antagonists blocked the initial burst in nitrite release. An inhibitor of nitric oxide synthase (NOS) blocked nitrite production, indicating that changes in nitrite reflect NO production. Treatment with dexamethasone or cycloheximide had no effect on nitrite production. Monoclonal antibodies directed against the inducible and endothelial NOS isoforms showed no immunoreactivity on Western blots, whereas monoclonal antibodies directed against the neuronal NOS gave specific products. These findings suggest that human aortic SMC express a constitutive neuronal NOS isoform, the enzymatic activity of which is modulated by flow.

Non-NASA Center↗

Satellite-based measurements of surface deformation reveal fluid flow associated with the geological storage of carbon dioxide

Interferometric Synthetic Aperture Radar (InSAR), gathered over the In Salah CO{sub 2} storage project in Algeria, provides an early indication that satellite-based geodetic methods can be effective in monitoring the geological storage of carbon dioxide. An injected volume of 3 million tons of carbon dioxide, from one of the first large-scale carbon sequestration efforts, produces a measurable surface displacement of approximately 5 mm/year. Using geophysical inverse techniques we are able to infer flow within the reservoir layer and within a seismically detected fracture/ fault zone intersecting the reservoir. We find that, if we use the best available elastic Earth model, the fluid flow need only occur in the vicinity of the reservoir layer. However, flow associated with the injection of the carbon dioxide does appear to extend several kilometers laterally within the reservoir, following the fracture/fault zone.

54 ENVIRONMENTAL SCIENCES↗

Investigation on the Fluid Flow and Decarburization Process in the RH Process

In the current study, mathematical models were developed to predict the fluid flow and motion of gas bubbles in the RH degasser. The multiphase model volume of fluid was employed to simulate the free surface in the vacuum chamber, while injected argon bubbles were treated as discrete-phase particles and tracked using the discrete-phase model. The expansion of argon bubbles was considered. The variation of the liquid level in the vacuum chamber and the effect of the number of nozzles on the recirculation rate were discussed in detail. The optimal number of nozzles was 6. Furthermore, the decarburization process was simulated by considering three reaction sites: the free surface, inner sites of the liquid steel in the vacuum chamber, and the bubble surface. The carbon contents predicted by the decarburization model were well validated by the measured results in the literature. The effect of the gas flow rate on the decarburization process was also investigated. With the increasing gas flow rate, the carbon content gradually decreased, and then reached the steady state. The optimal gas flow rate was 2400 L/min, which was explained by the comparison of the decarburization rate constants. Meanwhile, the decarburization reaction was in a quick decarburization stage for the first 7 minutes, and for the next 13 minutes, the decarburization rate constant rapidly decreased.

42 ENGINEERING↗

Flag-dipole and flagpole spinor fluid flows in Kerr spacetimes

Flagpole and flag-dipole spinors are particular classes of spinor fields that has been recently used in different branches of theoretical physics. In this paper, we study the possibility and consequences of these spinor fields to induce an underlying fluid flow structure in the background of Kerr spacetimes. We show that flag-dipole spinor fields are solutions of the equations of motion in this context. To our knowledge, this is the second time that this class of spinor field appears as a physical solution, the first one occurring as a solution of the Dirac equation in ESK gravities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗