Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “field validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Focusing Ions at Atmospheric Pressure using Nonlinear DC Voltage Sequences Applied to a Stacked Ring Ion Guide

Many modern ion mobility (IM) and mass spectrometers (MS) operate under low pressure (= 10 Torr) and employ high voltage radiofrequencies (RF) to provide ion confinement. Unfortunately, RF effectiveness drastically decreases as pressure increases, and few techniques for focusing ions at elevated pressures exist. Here we demonstrate a new approach for focusing ions at atmospheric pressure (AP) by applying nonlinear DC voltage sequences following quadratic and power (exponential) functions to a stacked ring ion guide. We used ion trajectory simulations to rigorously explore how ions react to nonlinear electric fields and validate the simulations with a set of ion current measurements performed at AP. Ion trajectory simulations show that ions initially defocus near the entrance of the device but then become intensely focused as they travel through the device. Contour plots for both nonlinear voltage sequences show electric field lines that increasingly curve inwards as a function of distance, resulting in spatial ion focusing. Experimental ion current and spot size measurements were performed at AP using a 10-cm stacked ring ion guide and a segmented Faraday cup detector. Quadratic sequences produced ~5% smaller spot sizes (~22.8 mm) and ~25% higher ion current compared to a linear voltage sequence (~24.0 mm). Alternatively, power sequences produced ~64% smaller spot sizes (~8.7 mm), albeit with ~10x lower ion current. However, both nonlinear voltage sequences produced similar ion currents at the center of the Faraday cup detector, indicating that higher ion densities are achieved when using nonlinear voltage gradients. These results demonstrate a new way to focus ions at AP, and the capabilities demonstrated here provide fundamental insights on how to keep ions inside analytical devices at elevated pressures without RF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2014

Validation of the Two-Layer Model for Correcting Clear Sky Reflectance Near Clouds

A two-layer model was developed in our earlier studies to estimate the clear sky reflectance enhancement near clouds. This simple model accounts for the radiative interaction between boundary layer clouds and molecular layer above, the major contribution to the reflectance enhancement near clouds for short wavelengths. We use LES/SHDOM simulated 3D radiation fields to valid the two-layer model for reflectance enhancement at 0.47 micrometer. We find: (a) The simple model captures the viewing angle dependence of the reflectance enhancement near cloud, suggesting the physics of this model is correct; and (b) The magnitude of the 2-layer modeled enhancement agree reasonably well with the "truth" with some expected underestimation. We further extend our model to include cloud-surface interaction using the Poisson model for broken clouds. We found that including cloud-surface interaction improves the correction, though it can introduced some over corrections for large cloud albedo, large cloud optical depth, large cloud fraction, large cloud aspect ratio. This over correction can be reduced by excluding scenes (10 km x 10km) with large cloud fraction for which the Poisson model is not designed for. Further research is underway to account for the contribution of cloud-aerosol radiative interaction to the enhancement.

two-layer model↗
NASA NTRS2000

A10 Convective Systems Observed During TRMM Field Campaigns

The Tropical Rainfall Measuring Mission (TRMM) will have completed three years in orbit at the time of the Fall 2000 AGU meeting. A summary of research highlights will be presented focusing on application of TRMM data to topics ranging from climate analysis, through improving forecasts to microphysical research. Surface rainfall estimates based on different instruments on TRMM currently differ by 20%. The difference is not surprising considering the different type of observations available for the first time with TRMM through both the passive and active microwave sensors. Resolving that difference will strengthen the validity and utility of ocean rainfall estimates and is the topic of ongoing research utilizing various facets of the TRMM validation and field experiment programs. The TRMM rainfall estimates will be intercompared among themselves and with other estimates, including those of the standard, monthly Global Precipitation Climatology Project (GPCP) analysis. The GPCP analysis agrees roughly in magnitude with the passive microwave-based TRMM estimates which is not surprising considering GPCP over-ocean estimates are based on passive microwave observations. A summary of validation of TRMM estimates against raingauge and radar/raingauge analyses will be presented. At finer time scales results of merging TRMM, other passive microwave observations, and geosynchronous estimates into a 3-hour time resolution analysis will be described.

Adler, Robert↗
DOE OSTI2026

Meta-analysis of North American Arctic and boreal aboveground biomass datasets: assessing accuracy, dynamics, and similarities

The North American arctic and boreal regions (ABRs) are rapidly warming and experiencing intensifying disturbances. Accurately quantifying aboveground biomass (AGB) is critical for understanding the impacts of these changes on the carbon cycle and for designing climate change mitigation strategies. Several AGB maps have been developed for the North American ABRs, including recent contributions from National Aeronautics and Space Administration’s Arctic-Boreal Vulnerability Experiment (ABoVE) campaign. However, these maps differ widely in training data, methodology, and resulting AGB density estimates. Presently, a comprehensive comparative evaluation is lacking, making it difficult for users to select datasets suited to their research or management needs. Here, in this study, we conducted a comparative analysis of nine AGB density datasets across North American ABRs, specifically for Alaska and Canada. We (1) summarized AGB by ecoregion and Canadian provinces, (2) evaluated their accuracy against field-based measurements, (3) analyzed spatial and temporal similarities among datasets, and (4) assessed their ability to capture disturbance (fire and harvest) impacts on AGB. We found substantial variation in regional and local AGB estimates across datasets, with overall accuracy ranging from R 2 = 0.25–0.62 and Bias% from −47.8% to 69.9% when validated against field plots. Despite these differences, most datasets have comparatively consistent spatial patterns in AGB (r > 0.8 for most cases). In contrast, agreement on the temporal patterns of AGB change is generally low. We found datasets with spatial resolutions ⩽300 m are capable of capturing disturbance impacts on AGB dynamics, though sensitivity varies across products. Our findings and dataset summary provide guidance for selecting appropriate AGB datasets for different applications within our study area. Our analysis also highlights the need to decrease map bias and increase capability to detect temporal change to decrease uncertainty of AGB datasets potentially by using training data which is representative of major plant functional types within the mapped area.

ABoVE↗
DOE OSTI2020

Modeling Assessment of Tidal Energy Extraction in the Western Passage

Numerical models have been widely used for the resource characterization and assessment of tidal instream energy. The accurate assessment of tidal stream energy resources at a feasibility or project-design scale requires detailed hydrodynamic model simulations or high-quality field measurements. This study applied a three-dimensional finite-volume community ocean model (FVCOM) to simulate the tidal hydrodynamics in the Passamaquoddy–Cobscook Bay archipelago, with a focus on the Western Passage, to assist tidal energy resource assessment. IEC Technical specifications were considered in the model configurations and simulations. The model was calibrated and validated with field measurements. Energy fluxes and power densities along selected cross sections were calculated to evaluate the feasibility of the tidal energy development at several hotspots that feature strong currents. When taking both the high current speed and water depth into account, the model results showed that the Western Passage has great potential for the deployment of tidal energy farms. The maximum extractable power in the Western Passage was estimated using the Garrett and Cummins method. Different criteria and methods recommended by the IEC for resource characterization were evaluated and discussed using a sensitivity analysis of energy extraction for a hypothetical tidal turbine farm in the Western Passage.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Development and cross‐validation of a circumference‐based predictive equation to estimate body fat in an active population

Abstract Objective The U.S. Army uses sex‐specific circumference‐based prediction equations to estimate percent body fat (%BF) to evaluate adherence to body composition standards. The equations are periodically evaluated to ensure that they continue to accurately assess %BF in a diverse population. The objective of this study was to develop and validate alternative field expedient equations that may improve upon the current Army Regulation (AR) body fat (%BF) equations. Methods Body size and composition were evaluated in a representatively sampled cohort of 1904 active‐duty Soldiers (1261 Males, 643 Females), using dual‐energy X‐ray absorptiometry (%BF DXA ), and circumferences obtained with 3D imaging and manual measurements. Sex stratified linear prediction equations for %BF were constructed using internal cross validation with %BF DXA as the criterion measure. Prediction equations were evaluated for accuracy and precision using root mean squared error, bias, and intraclass correlations. Equations were externally validated in a convenient sample of 1073 Soldiers. Results Three new equations were developed using one to three circumference sites. The predictive values of waist, abdomen, hip circumference, weight and height were evaluated. Changing from a 3‐site model to a 1‐site model had minimal impact on measurements of model accuracy and performance. Male‐specific equations demonstrated larger gains in accuracy, whereas female‐specific equations resulted in minor improvements in accuracy compared to existing AR equations. Equations performed similarly in the second external validation cohort. Conclusions The equations developed improved upon the current AR equation while demonstrating robust and consistent results within an external population. The 1‐site waist circumference‐based equation utilized the abdominal measurement, which aligns with associated obesity related health outcomes. This could be used to identify individuals at risk for negative health outcomes for earlier intervention.

Taylor, Kathryn M.↗
DOE OSTI2025

Field Testing of an Affordable Zero-Liquid-Discharge Arsenic-Removal Technology for a Small-Community Drinking Water System in Rural California

Arsenic contamination in groundwater threatens public health, particularly in small, low-income communities lacking affordable treatment solutions. This study investigated the field implementation of novel air cathode assisted iron electrocoagulation (ACAIE) technology for arsenic removal in Allensworth, California, where groundwater arsenic concentrations exceeded 250 µg/L. Over four months, a pilot-scale ACAIE system, operating at 600 L/h, consistently reduced arsenic levels to below the EPA’s maximum contaminant level of 10 µg/L. Laboratory experiments informed the optimization of charge dosage and flow rates, which were validated during field testing of the ACAIE 600 L/h system. The in-situ generation of hydrogen peroxide at the cathode speeded up the reaction kinetics, ensuring high arsenic removal efficiency while allowing high throughput, even with a compact reactor size. An economic analysis demonstrated a treatment cost of USD 0.02/L excluding labor, highlighting the system’s affordability compared to conventional methods. Adding labor costs increased the treatment cost to USD 0.09/L. The regeneration of air cathodes extended their operational life, addressing a key maintenance challenge, thus reducing the costs slightly. Intermittent challenges were encountered with filtration and secondary contaminant removal; these issues highlight opportunities for further operational improvements. Despite these challenges, ACAIE’s low operational complexity, scalability, and cost-effectiveness make it a promising solution for underserved small communities. These findings provide critical insights into deploying sustainable arsenic remediation technologies that are tailored to the needs of rural, low-resource communities.

Bandaru, Siva R S↗
DOE OSTI2021

Modeling Study of Reduced Tubing Size Effects on Flow in Depleted Reservoir Natural Gas Storage Wells

This report explores the effects of tubing size reductions on natural gas flow from representative depleted reservoir underground storage wells and fields using basic models for coupled reservoir and pipe flow. This work was motivated by interest at the U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration, in evaluating the effects of tubing and packer as a potential safety upgrade to implement double-barrier systems to existing underground natural gas storage wells. Reservoir and well flow models were developed from widely accepted industry equations, verified against a commercial process simulator model, and validated against field data. The study utilized U.S. operator survey data to provide context and assure that modeling parameters including aver age deliverability rates for wells and fields, operating pressures, well depths, and storage capacities were all carefully considered to keep the modeling relevant to the known range of U.S. operations. The models generally found that wells and fields with inherently low deliverability were relatively insensitive to reductions in tubing diameter, primarily because the hydraulics in those cases were controlled by reservoir properties. For the high-producing wells and fields, the models found that reducing tubing diameter could produce significant reductions in deliverability, both at the field- and well-level. When put into context with occurrence data regarding average deliverability of fields and wells, it appears that most wells and most fields across the U.S. would experience deliverability reductions on the low end of what was simulated here, generally below 20%. For fields with moderate to high deliverability, reductions were generally larger, and could reach as high as 60% for the highest-producing wells and fields.

03 NATURAL GAS↗
NASA NTRS2018

Vegetation Height Estimate in Rice Fields Using Single Polarization TanDEM-X Science Phase Data

This study presents the retrieval of rice paddy height using single polarization (single-pol) interferometric SAR (InSAR) data by means of model-based height inversion without an external DEM. A total of eight TanDEM-X (TDX) scenes were used and the TDX images were; acquired using a large cross-track baseline configuration during the TDX Science Phase (June–August 2015). A single-pol inversion approach for a flooded rice field is proposed and evaluated over the Buan test site in South Korea. A novel approach is adopted for the estimation of the ground (i.e., water level) interferometric phase within a flooded rice paddy from TDX data acquired during a period of early rice growth. It is consequently possible to apply the model-based inversion algorithm to the single-pol InSAR data. Rice height maps during the rice growth cycle presented and validated by field measurements. The results demonstrated the high performance of the inversion with a correlation coefficient of 0.78 and an RMSE of 0.10 m. The proposed methodology will be useful to monitor rice plants and to predict a gross rice yield, along with dual and fully polarimetric interferometric SAR data.

Lee, Seung-Kuk↗
DOE OSTI2025

Modeling and verification of dynamic field ionization for laser-target interactions

Integrating field ionization models into kinetic plasma simulations is required for a variety of applications, especially when field strengths vary from low to high regimes, such as in laser-target interactions. The introduction of new physics models into kinetic codes requires a rigorous verification of their accuracy through well-defined verification problems. In this work, the field ionization model that has been included in the kinetic plasma code VPIC is presented, along with the detailed approach adopted for its integration. This model includes a comprehensive range of field ionization mechanisms: multiphoton ionization, tunneling ionization, and barrier suppression ionization. New verification problems employed to evaluate the ionization model's fidelity are outlined, and the simulation parameters that affect the accuracy of simulation results are explored. Additionally, this work addresses the impact of field ionization on computational performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

In-flight radiometric calibration of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS)

A reflectance-based method was used to provide an analysis of the in-flight radiometric performance of AVIRIS. Field spectral reflectance measurements of the surface and extinction measurements of the atmosphere using solar radiation were used as input to atmospheric radiative transfer calculations. Five separate codes were used in the analysis. Four include multiple scattering, and the computed radiances from these for flight conditions were in good agreement. Code-generated radiances were compared with AVIRIS-predicted radiances based on two laboratory calibrations (pre- and post-season of flight) for a uniform highly reflecting natural dry lake target. For one spectrometer (C), the pre- and post-season calibration factors were found to give identical results, and to be in agreement with the atmospheric models that include multiple scattering. This positive result validates the field and laboratory calibration technique. Results for the other spectrometers (A, B and D) were widely at variance with the models no matter which calibration factors were used. Potential causes of these discrepancies are discussed.

Conel, James E.↗
DOE OSTI2022

Using high-throughput amplicon sequencing to determine diet of generalist lady beetles in agricultural landscapes

Determining feeding relationships is central to understanding biological control potential in the field. However, methods to differentiate actual (or realized) feeding relationships from potential feeding relationships is lacking especially for small, generalist predators such as lady beetles. In this study, we used DNA metabarcoding approaches to characterize actual feeding relationships of lady beetles (Coccinellidae) in the field and validated our methods with a lab study. We first asked whether high-throughput amplicon sequencing (HTS) can characterize diets of lady beetles ranging from monotypic diets to diverse diet mixtures in the lab. We then examined whether diet composition and breadth of lady beetles collected from different habitat types in southern WI varied between monocultures of soybean and corn, diverse tallgrass prairie, and urban habitats. Lastly, we asked whether different body or tissue types (partial-body versus whole-body specimens) would change the likelihood of prey detection for both studies. In our controlled lab study, we found that HTS can accurately assess diet composition and diet breadth for lady beetle populations, but at the individual level, HTS has limitation for individuals feeding on more than three species of prey at any given time. In our field study, we documented lower prey richness and diet breadth in corn compared to soybean and grassland, and greater prey DNA in regurgitants than in whole-body specimens. Finally, we found that reduced diet diversity was associated with an increased prevalence of intraguild predation, but that habitat and prey diversity are not necessarily correlated. The prey detection rates (proportion of specimens with prey DNA) in our study were comparable to other studies (55% in the lab study, 33% in field study) and varied with diet composition and habitat type. Furthermore, the relatively low detection rates suggest that many consumer individuals would need to be assayed to fully assess diet diversity, especially in diverse systems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Solar-Tracker Diffuse-Response Algorithm for Balancing Energy Gain and Mechanical Wear in Photovoltaic Systems

Single-axis solar tracking maximizes photovoltaic energy production under clear-sky conditions; however, its effectiveness decreases under cloudy and overcast skies, where diffuse irradiance dominates and the optimal module orientation changes. Conventional tracking algorithms either neglect sky conditions or rely on simplified diffuse-response strategies that may trigger frequent tracker repositioning under variable cloud cover, leading to increased mechanical wear with marginal energy gains. This work proposes an enhanced diffuse-response tracking algorithm that explicitly accounts for both the intensity and temporal persistence of cloudiness. By requiring overcast conditions to persist for a minimum duration before reorienting the tracker to a diffuse-stow position, the proposed approach reduces unnecessary movements while preserving the benefits of diffuse-response operation. The algorithm is evaluated through numerical simulations based on historical meteorological data and validated using field measurements on monofacial and bifacial photovoltaic strings. The results show that the proposed strategy reduces excess tracker movement from 114% to 0.16% while maintaining nearly the same energy yield. Compared to a conventional diffuse-response algorithm, the associated energy reduction is minimal (≈0.17%) relative to the ≈0.37% yield gain observed at the studied location. These findings demonstrate that incorporating cloudiness duration enables a practical compromise between energy performance and tracker durability, particularly for monofacial photovoltaic systems.

14 SOLAR ENERGY↗
NASA NTRS2015

Advanced Concept Studies for Supersonic Commercial Transports Entering Service in the 2018-2020 Period Phase 2

Lockheed Martin Aeronautics Company (LM), working in conjunction with General Electric Global Research (GE GR) and Stanford University, executed a 19 month program responsive to the NASA sponsored "N+2 Supersonic Validation: Advanced Concept Studies for Supersonic Commercial Transports Entering Service in the 2018-2020 Period" contract. The key technical objective of this effort was to validate integrated airframe and propulsion technologies and design methodologies necessary to realize a supersonic vehicle capable of meeting the N+2 environmental and performance goals. The N+2 program is aligned with NASA's Supersonic Project and is focused on providing system level solutions capable of overcoming the efficiency, environmental, and performance barriers to practical supersonic flight. The N+2 environmental and performance goals are outlined in the technical paper, AIAA-2014-2138 (Ref. 1) along with the validated N+2 Phase 2 results. Our Phase 2 efforts built upon our Phase 1 studies (Ref. 2) and successfully demonstrated the ability to design and test realistic configurations capable of shaped sonic booms over the width of the sonic boom carpet. Developing a shaped boom configuration capable of meeting the N+2 shaped boom targets is a key goal for the N+2 program. During the LM Phase 1 effort, LM successfully designed and tested a shaped boom trijet configuration (1021) capable of achieving 85 PLdB under track (forward and aft shock) and up to 28 deg off-track at Mach 1.6. In Phase 2 we developed a refined configuration (1044-2) that extended the under 85 PLdB sonic boom level over the entire carpet of 52 deg off-track at a cruise Mach number of 1.7. Further, the loudness level of the configuration throughout operational conditions calculates to an average of 79 PLdB. These calculations rely on propagation employing Burger's (sBOOM) rounding methodology, and there are indications that the configuration average loudness would actually be 75 PLdB. We also added significant fidelity to the design of the configuration in this phase by performing a low speed wind tunnel test at our LTWT facility in Palmdale, by more complete modelling of propulsion effects in our sonic boom analysis, and by refining our configuration packaging and performance assessments. Working with General Electric, LM performed an assessment of the impact of inlet and nozzle effects on the sonic boom signature of the LM N+2 configurations. Our results indicate that inlet/exhaust streamtube boundary conditions are adequate for conceptual design studies, but realistic propulsion modeling at similar stream-tube conditions does have a small but measurable impact on the sonic boom signature. Previous supersonic transport studies have identified aeroelastic effects as one of the major challenges associated with the long, slender vehicles particularly common with shaped boom aircraft (Ref. 3). Under the Phase 2 effort, we have developed a detailed structural analysis model to evaluate the impact of flexibility and structural considerations on the feasibility of future quiet supersonic transports. We looked in particular at dynamic structural modes and flutter as a failure that must be avoided. We found that for our N+2 design in particular, adequate flutter margin existed. Our flutter margin is large enough to cover uncertainties like large increases in engine weight and the margin is relatively easy to increase with additional stiffening mass. The lack of major aeroelastic problems probably derives somewhat from an early design bias. While shaped boom aircraft require long length, they are not required to be thin. We intentionally developed our structural depths to avoid major flexibility problems. So at the end of Phase 2, we have validated that aeroelastic problems are not necessarily endemic to shaped boom designs. Experimental validation of sonic boom design and analysis techniques was the primary objective of the N+2 Supersonic Validations contract; and in this Phase, LM participated in four high speed wind tunnel tests. The first so-called Parametric Test in the Ames 9x7 tunnel did an exhaustive look at variation effects of the parameters: humidity, total pressure, sample time, spatial averaging distance and number of measurement locations, and more. From the results we learned to obtain data faster and more accurately, and made test condition tolerances easy to meet (eliminating earlier 60 percent wasted time when condition tolerances could not be held). The next two tests used different tunnels. The Ames 11 ft tunnel was used to test lower Mach numbers of 1.2 and 1.4. There were several difficulties using this tunnel for the first time for sonic boom including having to shift the measurement Mach numbers to 1.15 and 1.3 to avoid flow problems. It is believed that the 11 ft could be used successfully to measure sonic boom but there are likely to be a number of test condition restrictions. The Glenn 8x6 ft tunnel was used next and the tunnel has a number of desirable features for sonic boom measurement. While the Ames 9x7 can only test Mach 1.55 to 2.55 and the 11 ft can only test Mach 1.3 and lower, the Glenn 8x6 can test continuously from Mach 0.3 to 2.0. Unfortunately test measurement accuracy was compromised by a reference pressure drift. Post-test analysis revealed that the drift occurred when Mach number drifted slightly. Test measurements indicated that if Mach number drift is eliminated, results from the 8x6 would be more accurate, especially at longer distances, than results from the 9x7. The fourth test in the 9x7, called LM4, used everything we learned to comprehensively and accurately measure our new 1044-02 configuration with a full-carpet shaped signature design. Productivity was 8 times greater than our Phase 1 LM3 test. Measurement accuracy and repeatability was excellent out to 42 in. However, measurements at greater distances require the rail in the aft position and become substantially less accurate. Further signature processing or measurement improvements are needed for beyond near-field signature validation.

Morgenstern, John↗
DOE OSTI2020

Calibrating Synchronous-Generator-Interfaced DG Models in Microgrids Using Multiple Event Data

Microgrids, consisting of distributed generators (DGs), loads, and energy storage systems, play an important role in future smart grids. In order to evaluate how microgrids operate and their dynamic response, it is necessary to develop accurate dynamic models of DGs in microgrids. This paper proposes a systematic method to calibrate synchronous-generator-interfaced DG models. Challenges associated with model validation in microgrids are analyzed. Underlying parameters are categorized into two groups, i.e., the steady-state parameters and time constants, which are estimated in two successive stages using multiple event data. This methodology ensures that the validated model with the estimated parameters are applicable for all events. A modified unscented Kalman filter (UKF) is proposed to deal with the cases in which measurement of power angle is unavailable. The effectiveness of the proposed method is validated using field test data of a 2.6 MVA diesel generator in a real microgrid.

Wang, Zhiwen↗
DOE OSTI2021

Assessing Marginal Land Availability Based on Land Use Change Information in the Contiguous United States

Utilization of marginal land for growing dedicated bioenergy crops for second-generation biofuels is appealing to avoid conflicts with food production. This study develops a novel framework to quantify marginal land for the Contiguous United States (CONUS) based on a history of satellite-observed land use change (LUC) over the 2008–2015 period. Frequent LUC between crop and noncrop is assumed to be an indicator of economically marginal land; this land is also likely to have a lower opportunity cost of conversion from food crop to bioenergy crop production. We first present an approach to identify cropland in transition using the time series of Cropland Data Layer (CDL) land cover product and determine the amount of land that can be considered marginal with a high degree of confidence vs with uncertainty across the CONUS. We find that the biophysical characteristics of this land and its productivity and environmental vulnerability vary across the land and lie in between that of permanent cropland and permanent natural vegetation/bare areas; this land also has relatively low intrinsic value and agricultural profit but a high financial burden and economic risk. We find that the total area of marginal land with confidence vs with uncertainty is 10.2 and 58.4 million hectares, respectively, and mainly located along the 100th meridian. Only a portion of this marginal land (1.4–2.2 million hectares with confidence and 14.8–19.4 million hectares with uncertainty) is in the rainfed region and not in crop production and, thus, suitable for producing energy crops without diverting land from food crops in 2016. These estimates are much smaller than the estimates obtained by previous studies, which consider all biophysically low-quality land to be marginal without considering economical marginality. The estimate of marginal land for bioenergy crops obtained in this study is an indicator of the availability of economically marginal land that is suitable for bioenergy crop production; whether this land is actually converted to bioenergy crops will depend on the market conditions. Here, we note the inability to conduct field-level validation of cropland in transition and leave it to future advances in technology to ground-truth land use change and its relationship to economically marginal land.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Composition and Configuration Dependence of Glass-Transition Temperature in Binary Copolymers and Blends of Polyhydroxyalkanoate Biopolymers

Polyhydroxyalkanoates (PHAs), a promising class of biomaterials, have gained considerable attention to replace petroleum-based plastics owing to their excellent biocompatibility and biodegradability. Homopolymers of PHA suffer from poor tunability in thermal and mechanical properties. Going from homopolymers to copolymers, the design space can be substantially enhanced by combining two or more monomers in different compositions (i.e., relative ratios of the different monomers) and configurations (i.e., relative positions of the different monomers in the polymer backbone) leading to a substantially large chemical space where application-specific optimization for the targeted functionality can be performed. However, this composition and configuration dependence of properties in the vast PHA copolymer chemical space remains largely unexplored. In this contribution, further building on our past work with PHA homopolymers, we systematically explore these chemical trends for glass-transition temperature (Tg) in PHA copolymers and blends. Overall, our molecular dynamics simulations, utilizing a previously validated force field for PHAs, suggest that these trends are largely governed not only by the homopolymer Tg values but also configuration-dependent interchain interactions in the copolymer system. In particular, our results indicate that the configuration-dependent variation in the target property at a fixed composition can be significant in the presence of hydrogen-bond-forming monomers. These qualitative observations are further rationalized by quantitatively analyzing various closely related atomic level descriptors of copolymers and blends such as monomer mobility, number of hydrogen bonds, and pair correlation functions. The findings presented in this work help to develop a deeper atomistic-level understanding of thermomechanical behavior of PHA-based copolymers and can potentially guide the rational design of biopolymers as environmental-friendly functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Switchgrass Microbiome: A Review of Structure, Function, and Taxonomic Distribution

Switchgrass (Panicum virgatum L.) has been championed as a promising bioenergy crop due to its high productivity across a wide environmental range. The switchgrass microbiome—including bacteria, archaea, fungi, and other microbiota inhabiting soil and plant tissues—can influence plant function substantially. We conducted a review of the literature investigating switchgrass microbiome structure, key functional roles, and taxa isolated from field-grown plants. Although site conditions and plant compartment (i.e., location within shoots, roots, or root-influenced soil) appear to be the strongest drivers of switchgrass microbiome structure, the microbiome is also shaped by climate, season, and host genotype. Studies comparing across plant species show that the switchgrass microbiome is more similar to the microbiomes of other perennial plants than to the microbiomes of annual plants. Members of the switchgrass microbiome confer several benefits to their host. Most notably, mycorrhizal fungi can increase plant biomass many-fold, associative nitrogen-fixing bacteria can provide a substantial portion of the plant’s nitrogen demand, and fungal endophytes can improve plant tolerance to drought. Although the fungi and bacteria cultured from switchgrass represent only a portion of the microbiome, these serve as a valuable resource for researchers interested in investigating functional outcomes of the switchgrass microbiome. We highlight areas where additional research is necessary for a more comprehensive understanding of switchgrass microbiome structure, function, and potential to enhance sustainable bioenergy production. Key gaps include the role of understudied organisms (e.g., viruses, microeukaryotes, and nonmycorrhizal fungi), multitrophic relationships, mechanisms underpinning switchgrass–microbiome interactions, and field-scale validation of experimental findings.

54 ENVIRONMENTAL SCIENCES↗