Results for “fast spectrum” — Page 12

DOE OSTI2021

Real-Time Data Acquisition and Processing System for MHz Repetition Rate Image Sensors

An electro-optic detector is one of the diagnostic setups used in particle accelerators. It employs an electro-optic crystal to encode the longitudinal beam charge profile in the spectrum of a light pulse. The charge distribution is then reconstructed using data captured by a fast spectrometer. The measurement repetition rate should match or exceed the machine bunching frequency, which is often in the range of several MHz. A high-speed optical line detector (HOLD) is a linear camera designed for easy integration with scientific experiments. The use of modern FPGA circuits helps in the efficient collection and processing of data. The solution is based on Xilinx 7-Series FPGA circuits and implements a custom latency-optimized architecture utilizing the AXI4 family of interfaces. HOLD is one of the fastest line cameras in the world. Thanks to its hardware architecture and a powerful KALYPSO sensor from KIT, it outperforms the fastest comparable commercial devices.

MicroTCA↗

DOE OSTI2026

Joint X-Ray, Kinetic Sunyaev–Zeldovich, and Weak Lensing Measurements: Toward a Consensus Picture of Efficient Gas Expulsion from Groups and Clusters

There is no consensus on how baryon feedback shapes the underlying matter distribution from either simulations or observations. We confront the uncertain landscape by jointly analyzing new measurements of the gas distribution around groups and clusters—DESI+ACT kinetic Sunyaev–Zel’dovich (kSZ) effect profiles and eROSITA X-ray gas masses—with mean halo masses characterized by galaxy–galaxy lensing. Across a wide range of halo masses ( M 500 = 10 13−14 M ⊙ ) and redshifts (0 < z < 1), we find evidence of more efficient gas expulsion beyond several R 500 than predicted by most state-of-the-art simulations. A like-with-like comparison reveals all kSZ and X-ray observations are inconsistent with the fiducial 1 Gpc 3 hydrodynamical FLAMINGO simulation, which was calibrated to reproduce pre-eROSITA X-ray gas fractions: eROSITA X-ray gas fractions are 2 × lower than the simulation, and the kSZ measurements are combined >8σ discrepant. The FLAMINGO simulation variant with the most gas expulsion, and therefore the most suppression of the matter power spectrum relative to a dark-matter-only simulation, provides a good description of how much gas is expelled and how far it extends; the enhanced gas depletion is achieved by more powerful but less frequent AGN outbursts. Joint kSZ, X-ray, and lensing measurements form a consistent picture of gas expulsion beyond several R 500 , implying a more suppressed matter power spectrum than predicted by most recent simulations. Complementary observables (e.g., thermal Sunyaev–Zel’dovich effect and fast radio bursts) and next-generation simulations are critical to understanding the physical mechanism behind this extreme gas expulsion and mapping its impact on the large-scale matter distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Optimizing cloud motion estimation on the edge with phase correlation and optical flow

Abstract. Phase correlation (PC) is a well-known method for estimating cloud motion vectors (CMVs) from infrared and visible spectrum images. Commonly, phase shift is computed in the small blocks of the images using the fast Fourier transform. In this study, we investigate the performance and the stability of the blockwise PC method by changing the block size, the frame interval, and combinations of red, green, and blue (RGB) channels from the total sky imager (TSI) at the United States Atmospheric Radiation Measurement user facility's Southern Great Plains site. We find that shorter frame intervals, followed by larger block sizes, are responsible for stable estimates of the CMV, as suggested by the higher autocorrelations. The choice of RGB channels has a limited effect on the quality of CMVs, and the red and the grayscale images are marginally more reliable than the other combinations during rapidly evolving low-level clouds. The stability of CMVs was tested at different image resolutions with an implementation of the optimized algorithm on the Sage cyberinfrastructure test bed. We find that doubling the frame rate outperforms quadrupling the image resolution in achieving CMV stability. The correlations of CMVs with the wind data are significant in the range of 0.38–0.59 with a 95 % confidence interval, despite the uncertainties and limitations of both datasets. A comparison of the PC method with constructed data and the optical flow method suggests that the post-processing of the vector field has a significant effect on the quality of the CMV. The raindrop-contaminated images can be identified by the rotation of the TSI mirror in the motion field. The results of this study are critical to optimizing algorithms for edge-computing sensor systems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Filter-Banks for Ultra-Wideband Communications, Sensing, and Localization

Recently, filterbank multi-carrier spread spectrum (FBMC-SS) has been proposed as a candidate waveform for ultrawideband (UWB) communications. It has been noted that FBMCSS is a perfect match to this application, leading to a trivial method of matching to the required spectral mask at different regions of the world. FBMC-SS also allows easy rejection of high-power interfering signals that may appear over different parts of the UWB spectral band. In this paper, we concentrate on the use of staggered multitone spread spectrum (SMT-SS) for UWB communications. SMT makes use of offset QAM modulation to transmit data symbols over narrowband, overlapping subcarrier bands. This form of FBMC-SS is well-suited to UWB communications because it has good spectral efficiency and a flat power spectral density (PSD), resulting in good utilization of the UWB spectral mask. Additionally, we explore new methods for multi-coding that result in higher bit rates than previous FBMCSS systems. Moreover, we study methods for equalizing the UWB multipath channel and cancelling narrowband interference. Excellent performance of the proposed methods are substantiated by presenting simulation results.

99 - GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

Unraveling Exciton Trap Dynamics and Nonradiative Loss Pathways in Quantum Dots via Atomistic Simulations

Surface defects in colloidal quantum dots are a major source of nonradiative losses, yet the microscopic mechanisms underlying exciton trapping and recombination remain elusive. Here, we develop a model Hamiltonian based on atomistic electronic calculations to investigate exciton dynamics in CdSe/CdS core/shell QDs containing a single hole trap introduced by an unpassivated sulfur atom. By systematically varying the defect depth and reorganization energy, we uncover how defect-induced excitonic states mediate energy relaxation pathways. Our simulations reveal that a single localized defect can induce a rich spectrum of excitonic states, leading to multiple dynamical regimes, from slow, energetically off-resonant trapping to fast, cascaded relaxation through in-gap defect states. Crucially, we quantify how defect-induced polaron shifts and exciton-phonon couplings govern the balance between efficient radiative emission and rapid nonradiative decay. These insights clarify the microscopic origin of defect-assisted loss channels and suggest pathways for tailoring QD optoelectronic properties via surface and defect engineering.

Defects↗

DOE OSTI2020

Development of a predictive capability of short-pulse laser-driven broadband x-ray radiography

High intensity, short-pulse laser interaction with a solid metal target produces broadband hard x-rays potentially for various applications of x-ray radiography. In this work, experimental benchmarking of numerical modelling for short-pulse laser-driven broadband x-ray radiography is presented. Angular dependent x-ray spectra are first calculated with a hybrid particle-in-cell code, Large Scale Plasma (LSP), using fast electron parameters inferred from an analysis of measured bremsstrahlung signals. Subsequently, a calculated x-ray spectrum in the direction of radiography is used in photon transport calculations using a Monte Carlo code, Particle and Heavy Ion Transport code System (PHITS), to simulate a radiographic image including a modelled 3D test object, an x-ray attenuation filter and an image plate detector. Simulated radiographic images are compared with measurements obtained in an experiment using a 50-TW Leopard short-pulse laser at the University of Nevada Reno. Results show that simulations reproduce the experimental images well for three different attenuation filters (plastic, aluminium, and brass), while 1D transmission profiles for the plastic and aluminium filters are quantitatively in good agreement. The modelling approach established in this work could be used as a predictive tool to simulate radiographic images of complex 3D solid objects at any arbitrary angular position or to optimize experimental components such as the source spectrum, x-ray attenuation filters and a detector type depending on a radiographic object without carrying out radiographic experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

Aliberti, Gerardo↗

DOE OSTI2020

Late Prompt Fission Gamma Rays from 235 U(n,f) and 252 Cf(sf)

Two measurements of fission γ rays were performed with the DANCE and NEUANCE arrays using the reactions 235 U(n, f) and 252 Cf(sf). Utilizing the fast time response of the detectors and a method for estimating the accidental background, we obtained the energy spectrum of the late prompt fission γ rays as a function of the time since fission. The experimental results are compared with predictions of the code CGMF folded with GEANT4 simulations of the detector response.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Universal Fourier Attack for Time Series

A wide variety of adversarial attacks have been proposed and explored using image and audio data. These attacks are notoriously easy to generate digitally when the attacker can directly manipulate the input to a model, but are much more difficult to implement in the real world. In this paper we present a universal, time invariant attack for general time series data such that the attack has a frequency spectrum primarily composed of the frequencies present in the original data. The universality of the attack makes it fast and easy to implement as no computation is required to add it to an input, while time invariance is useful for real world deployment. Additionally, the frequency constraint ensures the attack can withstand filtering defenses. We demonstrate the effectiveness of the attack on two different classification tasks through both digital and real world experiments, and show that the attack is robust against common transform-and-compare defense pipelines.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Encryption of Signal Pulses to Replace Tamper-indicating Conduit

In order to verify signal integrity and point of origin for TTL pulse data used in IAEA systems, and to avoid the need for expensive tamper-indicating conduit or electronic techniques, we propose the development of a signal pulse signing and encryption in-line device. In measurement applications in which the data acquisition electronics is separate from the enclosed, sealed detector, tamper-indicating techniques are required to protect raw TTL pulse streams between the detector and the data acquisition module, i.e UMSR. The goal of this proposed project is to design a rad-tolerant transmitter that would mount inside the sealed detector system and a receiver in the sealed electronics cabinet with the data acquisition instrument. This transmitter/receiver pair would digitally sign and encrypt the pulse stream data at the detector then transmit the data to the sealed cabinet where the receiver would decrypt the data and reproduce the original pulse stream. Existing tamper indicating techniques, such as LiveWire’s spread spectrum time domain reflectometry rely on detecting physical changes to the wiring system and can be blind to fast coupling of micro-second wide pulses. Digital signing and encryption techniques such as the Sandia Laboratories Enhanced Data Authentication System (EDAS) are capable of encrypting communications data, i.e. RS-232, but are not capable reproducing a critical time correlated data streams. Recent NA-241 Safeguards Technology supported developments have reduced the need for special conduit to transmit data via Ethernet by incorporating the IAEA RAINSTORM data encryption and authentication protocol, a tamper indicator is still required to protect raw pulse data from detectors to the acquisition electronics. Encrypting pulse data is especially complicated for radiation detection instruments due to the time correlation data analysis that is performed on this data stream. Any corruption in the timing information will produce errors in measurement values.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Producing ENDF/B-quality Evaluations of 239 Pu(n,f) and 235 U(n,f) Average Prompt Neutron Multiplicities using the CGMF Model

This report documents evaluations of the neutron-induced 239 Pu and 235 U average prompt neutron multiplicities, $\overline{v}_p$, using the CGMF model developed at LANL. These evaluations are not updates of existing ENDF/B-VIII.0 nuclear data, but were both re-done from "scratch". That is, all experimental data were extracted from EXFOR, re-normalized to the newest nuclear data representing monitor observables, and detailed uncertainties were estimated from information in EXFOR as well as from templates of expected measurement uncertainties. We also included experimental data that were not yet available for ENDF/B-VIII.0, for instance, the data of Marini et al. for 239 Pu(n,f) $\overline{v}_p$ or the data of Khoklov et al. for 235 U(n,f) $\overline{v}_p$. Finally, we include the CGMF model; it computes $\overline{v}_p$ based on model parameters that at the same time calculate fission fragments as a function of mass, Y (A), the average total kinetic energy as a function of incident-neutron energy, $\langle TKE \rangle$(E inc ), etc. Such a detailed fission model that ties together many fission quantities has not been used to date for any $\overline{v}_p$ evaluation in ENDF/B. Here, we show that we can get evaluated 235 U(n,f) and 239 Pu $\overline{v}_p$ that not only correspond well to experimental $\overline{v}_p$, but that the associated evaluated model parameters also yield parameterizations of Y (A), $\langle TKE \rangle$(E inc ), etc., that correspond well to their respective experimental data. The new evaluated 239 Pu(n,f) $\overline{v}_p$ was also combined into a 239 Pu test file with the newest nuclear data for the 239 Pu prompt-fission neutron spectrum and fission cross sections. This new 239 Pu file performed reasonably well in predicting PU-MET-FAST assemblies, reaction rates in Jezebel and Flattop and three LLNL pulsed spheres. Due to that, the new 239 Pu(n,f) $\overline{v}_p$ evaluation presented here is being considered for ENDF/B-VIII.1. Hence, we can show here that CGMF is able to produce ENDF/B quality $\overline{v}_p$ nuclear data.

239Pu, 235U, Average Prompt-fission Neutron Multip↗

DOE OSTI2023

Universal Fourier Attack for Time Series

A wide variety of adversarial attacks have been proposed and explored using image and audio data. These attacks are notoriously easy to generate digitally when the attacker can directly manipulate the input to a model, but are much more difficult to implement in the real-world. In this paper we present a universal, time invariant attack for general time series data such that the attack has a frequency spectrum primarily composed of the frequencies present in the original data. The universality of the attack makes it fast and easy to implement as no computation is required to add it to an input, while time invariance is useful for real-world deployment. Additionally, the frequency constraint ensures the attack can withstand filtering. We demonstrate the effectiveness of the attack in two different domains, speech recognition and unintended radiated emission, and show that the attack is robust against common transform-and-compare defense pipelines.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

K2 Optical Emission from OJ 287 and Other γ-Ray Blazars on Hours-to-weeks Timescales from 2014 to 2018

We present second observations by K2 of OJ 287 and seven other γ-ray active galactic nuclei (AGNs) obtained in 2017–2018, second and third observations of the lobe-dominated, steep-spectrum quasar 3C 207, and observations of nine additional blazars not previously observed with K2. The AGNs were observed simultaneously with K2 and the Fermi Large Area Telescope for 51–81 days. Our full sample, observed in 2014–2018, contained 16 BL Lacertae objects (BL Lacs), nine flat-spectrum radio quasars (FSRQs), and four other γ-ray AGNs. Twelve BL Lacs and seven FSRQs exhibited fast, jagged light curves, while four BL Lacs and two FSRQs had slow, smooth light curves. Some objects changed their red-noise character significantly between repeated K2 observations. The optical characteristics of OJ 287 derived from the short-cadence K2 light curves changed between observations made before and after the predicted passage of the suspected secondary supermassive black hole through the accretion disk of the primary supermassive black hole. The average slopes of the periodogram power spectral densities of the BL Lacs' and FSRQs' light curves differed significantly, by ≈12%, with the BL Lac slopes being steeper, and a Kolmogorov–Smirnov test with a p-value of 0.039 indicates that these samples probably come from different populations; however, this result is not as strongly supported by power spectral response (PSRESP) analyses. Differences in the origin of the jets from the ergosphere or accretion disk in these two classes could produce such a disparity, as could different sizes or locations of emission regions within the jets.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

STARTR: An Open-Source MARVEL model for the NRIC Virtual Test Bed [Poster]

The National Reactor Innovation Center (NRIC) seeks to improve the understanding of microreactor physics in industry and academia through the development of a Microreactor Applications Research Validation and Evaluation (MARVEL) reactor-based model, published on the Virtual Test Bed (VTB). To achieve this goal, the Sodium-cooled Thermal-spectrum Advanced Research Test Reactor (STARTR) model was built using publicly available MARVEL specifications where possible and approximations where applicable, and was optimized for fast runtimes for researchers to receive rapid simulation feedback. STARTR will fill a gap between stakeholder interest and available models, as the first Sodium-cooled Thermal Reactor (STR) hosted on the VTB with baseline performance sanctioned by INL. This project involved the definition of all materials used in the reactor, geometry and all reactor subcomponents, and assertion of tallies and simulation settings within OpenMC 0.13.3. This poster details a small subset of the overall reactor physics testing: the two-dimensional power peaking factors and the flux energy spectrum, as well as plots of the created geometry. Future work includes code-to-code verification between the OpenMC-based model and a separately designed MCNP 6.2-based model.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

DOE OSTI2025

Neutron Fluence and Kerma Responses to Bare, Steel-Reflected, and Lucite-Reflected Steady-State Operations of the ORNL Health Physics Research Reactor

The experiments evaluated in this report were conducted at the Health Physics Research Reactor (HPRR), also known as the Fast Burst Reactor. The reactor was designed and built at Oak Ridge National Laboratory (ORNL) in 1961. In this evaluation, a total of 12 experiments were evaluated (6 shield configurations and two responses). Six of them are considered acceptable as benchmark experiments and are thoroughly described: the measurands are bare, steel-shielded and Lucite-shielded neutron fluences and neutron KERMA responses to steady-state operations of the HPRR. It is important to mention that there is a general lack of information in the experimental methodology and neutron spectrum unfolding, and in some cases, unexpected and unexplained discrepancies between calculation and experiment. The HPRR’s unique characteristics were that it is a fast reactor, the use of a Lucite shield as the shielding material, and the use of the neutron fluence as the main benchmark measurand. There are no known, significant correlations between benchmarks in this evaluation and benchmarks in other evaluations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2025

Removal of Homogeneous Broadening from 1 H-Detected Multidimensional Solid-State NMR Spectra

1 H-detected magic-angle spinning (MAS) NMR experiments have revolutionized the NMR studies of biological and inorganic solids by providing unparalleled sensitivity and resolution. Despite these gains, homogeneous broadening, originating from the incomplete removal of homonuclear dipolar interactions under fast MAS, remains highly prevalent and limits the achievable resolution. In direct analogy to super-resolution microscopy methods, we show that resolution beyond that currently achievable by fast MAS alone can be obtained by experiment-driven deconvolution. Following the acquisition of a single 2D NMR spectrum to measure the frequency-dependent homogeneous lineshapes, any number of 1 H-detected spectra can be enhanced in resolution, yielding comparable spectra as obtained with twice the MAS frequency. In conclusion, the versatility of this approach is demonstrated in the enhancement of single- and double-quantum homonuclear correlation spectra, in addition to heteronuclear correlation spectra acquired on a surface organometallic complex and the protein GB1.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Out-of-equilibrium Majorana zero modes in interacting Kitaev chains

Here, we employ a time-dependent real-space local density-of-states method to study the movement and fusion of Majorana zero modes in the one-dimensional interacting Kitaev model, based on the time evolution of many-body states. We analyze the dynamics and both fusion channels of Majoranas using time-dependent potentials, either creating walls or wells. For fast moving Majoranas, we unveil nonequilibrium signatures of the “strong-zero-mode” operator (quasiparity degeneracy in the full spectrum) and its breakdown in the presence of repulsive Coulomb interactions. Focusing on forming a full electron after fusion, we also discuss the upper and lower limits on the Majorana speed needed to reduce nonadiabatic effects and to avoid poisoning due to decoherence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗