Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elemental materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Application of advanced material systems to composite frame elements

A three phase program has been conducted to investigate DuPont's Long Discontinuous Fiber (LDF) composites. Additional tests were conducted to compare LDF composites against toughened thermosets and a baseline thermoset system. Results have shown that the LDF AS4/PEKK offers improved interlaminar (flange bending) strength with little reduction in mechanical properties due to the discontinuous nature of the fibers. In the third phase, a series of AS4/PEKK LDF C-section curved frames (representing a typical rotorcraft light frame) were designed, manufactured and tested. Specimen reconsolidation after 'stretch forming' and frame thickness were found to be key factors in this light frame's performance. A finite element model was constructed to correlate frame test results with expected strain levels determined from material property tests. Adequately reconsolidated frames performed well and failed at strain levels at or above baseline thermoset material test strains. Finally a cost study was conducted which has shown that the use of LDF for this frame would result in a significant cost savings, for moderate to large lot sizes compared with the hand lay-up of a thermoset frame.

Llorente, Steven↗
NASA NTRS1985

Effect of measured material properties on the finite element analysis of an OH-58 composite tail boom

A static and dynamic finite element analysis is conducted on a U.S. Army OH-58 composite tail boom and compared with test data. The tail boom is a filament-wound graphite/epoxy monocoque structure. The structural design of the composite tail boom skin is based on 50-percent graphite fiber volume. However, material tests on representative samples of the tail boom skin reveal that the graphite fiber-volume fraction varied from 44.6 to 49.3 percent. To determine the effect of using measured material properties, static and dynamic finite element analyses are conducted for three fiber-volume conditions of 45, 48, and 50 percent. The static and dynamic model with the 45-percent fiber-volume graphite skins gives the closest agreement with test data.

Bowman, L. M.↗
DOE OSTI2021

Elucidating the Redox Behavior during Atomic Layer Deposition on Lithium-Ion Battery Cathode Materials

Atomic layer deposition (ALD) has emerged as a promising technology for applying ultrathin protective coatings on lithium-ion battery (LIB) cathode surfaces to improve their cycling stability. While there have been numerous reports evaluating the electrochemical performance of these surface-modified cathode materials, the chemical changes induced on the surface of the cathode materials upon ALD coating are not fully studied. This paper describes a systematic investigation to understand the interfacial changes of 12 different cathode materials upon coating with aluminum oxide (Al 2 O 3 ) using trimethyl aluminum (TMA) and H 2 O, and aluminum fluoride (AlF 3 ) using TMA and hydrogen fluoride pyridine (HFPy). Here, the surface composition of these cathode materials, which range from simple transition metal oxides (e.g. NiO and MnO) to complex multi-element cathode materials (e.g. LiNi x Mn 1-x-y Co y O 2 , NMC), was studied via X-ray photoelectron spectroscopy (XPS). The XPS measurements reveal that the transition metals in the cathode materials undergo selective oxidation/reduction depending upon the nature of the precursor, the coating, and the cathode material. The ability to chemically modify the surface of cathode materials via vapor-phase precursor adsorption will open new avenues to systematically control the interface of the cathode materials in LIBs that are not possible by conventional coating methods.

25 ENERGY STORAGE↗
NASA NTRS1974

A correlation study of finite-element modeling for vibrations of composite material panels

A correlation study has been made to evaluate the effectiveness of finite-element modeling for vibrations of composite material panels. The three types of composite material panels studied were: (1) symmetrically laminated cross-ply panels, (2) unsymmetrically laminated cross-ply panels, and (3) a 1/6-scale sandwich wing model. Correlations of finite-element predictions for frequencies and vibration modes were made with Rayleigh-Ritz analyses and experimental data. For the symmetrically laminated panels, the finite-element representation predicted vibration modes very accurately. For the unsymmetrically laminated panels it was found that predictions using uncoupled finite-element plate bending elements did not give good agreement with experimental data. The constant-chord, swept-wing model was effectively analyzed by finite-element presentations using either sandwich elements or ribs and spars.

Thornton, E. A.↗
DOE OSTI2024

Method for leaching rare earth elements and critical minerals from organically associated materials

A method for extracting rare earth elements and critical minerals including adding an acid to a mixture comprising organically bound rare earth elements. The mixture is maintained at a pH of 0.25 to 4 for a period of time, resulting in a liquor and a leached mixture. The liquor is removed from the leached mixture to form a dewatered cake. The dewatered cake is washed to form a washing liquid. The washing liquid is recycled to create a second slurry comprising organically bound rare earth elements.

Theaker, Nolan↗
NASA NTRS1987

A finite element model for wave propagation in an inhomogeneous material including experimental validation

A finite element model was developed to solve for the acoustic pressure field in a nonhomogeneous region. The derivations from the governing equations assumed that the material properties could vary with position resulting in a nonhomogeneous variable property two-dimensional wave equation. This eliminated the necessity of finding the boundary conditions between the different materials. For a two media region consisting of part air (in the duct) and part bulk absorber (in the wall), a model was used to describe the bulk absorber properties in two directions. An experiment to verify the numerical theory was conducted in a rectangular duct with no flow and absorbing material mounted on one wall. Changes in the sound field, consisting of planar waves was measured on the wall opposite the absorbing material. As a function of distance along the duct, fairly good agreement was found in the standing wave pattern upstream of the absorber and in the decay of pressure level opposite the absorber.

Baumeister, Kenneth J.↗
NASA NTRS1987

A finite element model for wave propagation in an inhomogeneous material including experimental validation

A finite element model was developed to solve for the acoustic pressure field in a nonhomogeneous region. The derivations from the governing equations assumed that the material properties could vary with position resulting in a nonhomogeneous variable property two-dimensional wave equation. This eliminated the necessity of finding the boundary conditions between the different materials. For a two media region consisting of part air (in the duct) and part bulk absorber (in the wall), a model was used to describe the bulk absorber properties in two directions. An experiment to verify the numerical theory was conducted in a rectangular duct with no flow and absorbing material mounted on one wall. Changes in the sound field, consisting of planar waves, was measured on the wall opposite the absorbing material. As a function of distance along the duct, fairly good agreement was found in the standing wave pattern upstream of the absorber and in the decay of pressure level opposite the absorber.

Baumeister, Kenneth J.↗
DOE OSTI2024

Advanced thermal/environmental barrier coatings of high-entropy rare earth disilicates tuned by strong anharmonicity of Eu 2 Si 2 O 7

Advancing thermal/environmental barrier coating (TEBC) materials with integrated thermal-mechanical functions is paramount for safeguarding SiC-based ceramic matrix composites (CMCs) in high-efficiency gas turbines. Herein, we employ a synergistic approach, combining density functional theory (DFT) methods and combinatorial chemistry techniques, to design high-performance and low-cost RE 2 Si 2 O 7 (RE = rare earth elements) TEBC materials tailored for enhanced compatibility with SiC-based CMCs. Expanding on phase stability of alloying pure RE 2 Si 2 O 7 , the investigation extends to the mechanical and thermal properties of solid solution systems, including Er 1/2 Y 3/4 Yb 3/4 Si 2 O 7 , Gd 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 , and Eu 1/4 Er 1/4 Y 3/4 Yb 3/4 Si 2 O 7 . The solid solution systems exhibit a major reduction in lattice thermal conductivity relative to their pure counterparts, achieving ultralow values of 0.25 to 0.39 W m −1 K −1 at 1500 K. Furthermore, the coefficients of thermal expansion (CTE) of these solid solutions are precisely tuned within the desired range for SiC (4.4 to 5.5 × 10 −6 K −1 ), while maintaining good mechanical properties. Here, in particular, the addition of Eu 2 Si 2 O 7 demonstrates to be an important variable to the tuning of CTE and lattice thermal conductivity by leveraging its strong anharmonicity, presenting a pioneering avenue for fine-tuning material properties. In summary, this research not only identifies promising TEBC materials with superior thermal properties, but also introduces a valuable computational material design methodology for the rapid discovery of complex materials for harsh environments.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Additional aspects of elastohydrodynamic lubrication

Elastohydrodynamic lubrication (EHL) for materials of low elastic modulus is considered. Engineering applications in which EHL is important for low-elastic-modulus materials include seals, human joints, tires, and elastomeric-material machine elements. Theoretical solutions of the problem of fully flooded line contacts in the case of low-elastic-materials are discussed. The equation regarding dimensionless minimum film thickness for fully flooded elliptical contacts for low elastic modulus is compared with the corresponding equation for materials of high elastic modulus. The powers of the dimensionless speed parameter U are quite similar in both equations, but the power of the dimensionless load parameter W is much more significant for low-elastic-modulus materials. Attention is given to aspects of dimensionless grouping, the isoviscous rigid regime, the viscous rigid regime, the isoviscous elastic regime, and the viscous elastic regime.

Hamrock, B. J.↗
DOE OSTI2020

Viscoelastic Material Characterization and Modeling of Photovoltaic Module Packaging Materials for Direct Finite-Element Method Input

Numerical tools, such as the finite-element method, are increasingly used to design and evaluate the photovoltaic (PV) modules, providing for the reduction of development time and improved performance and reliability. However, high-fidelity material models are necessary to accurately model the complex structural behavior of the involved packaging materials. A common simplification used in recent years is to model the polymer materials (i.e., encapsulant and backsheet) as linear elastic, which will lead to inaccurate results. Therefore, in this work, we present a thorough characterization of the time- and temperature-dependent mechanical response of predominant PV module encapsulant and backsheet materials. Based on this material characterization, we developed and experimentally validated generalized Maxwell models to describe each material's viscoelastic response. In addition, we included measurements of the coefficient of thermal expansion and presented all material models in such a fashion for direct input into commercial finite-element method modeling software.

FEM↗
NASA NTRS1992

Combined Gamma Ray/neutron Spectroscopy for Mapping Lunar Resources

Some elements in the Moon can be resources, such as hydrogen and oxygen. Other elements, like Ti or the minerals in which they occur, such as ilmenite, could be used in processing lunar materials. Certain elements can also be used as tracers for other elements or lunar processes, such as hydrogen for mature regoliths with other solar-wind-implanted elements like helium, carbon, and nitrogen. A complete knowledge of the elemental composition of a lunar region is desirable both in identifying lunar resources and in lunar geochemical studies, which also helps in identifying and using lunar resources. The use of gamma ray and neutron spectroscopy together to determine abundances of many elements in the top few tens of centimeters of the lunar surface is discussed. To date, very few discussions of elemental mapping of planetary surfaces considered measurements of both gamma rays and the full range of neutron energies. The theories for gamma ray and neutron spectroscopy of the Moon and calculations of leakage fluxes are presented here with emphasis on why combined gamma ray/neutron spectroscopy is much more powerful than measuring either radiation alone.

Reedy, R. C.↗
NASA NTRS1996

Novel Composites for Wing and Fuselage Applications: Novel Wing Design Concepts - Task 1

Design trade studies were conducted to arrive at advanced wing designs that integrated new material forms with innovative structural concepts and cost-effective fabrication methods. A representative spar was selected for design, fabrication, and test to validate the predicted performance. Textile processes, such as knitting, weaving and stitching, were used to produce fiber preforms that were later fabricated into composite span through epoxy Resin Transfer Molding (RTM), Resin Film Infusion (RFI), and consolidation of commingled thermoplastic and graphite tows. The target design ultimate strain level for these innovative structural design concepts was 6000 mu in. per in. The spars were subjected to four-point beam bending to validate their structural performance. The various material form /processing combination Y-spars were rated for their structural efficiency and acquisition cost. The acquisition cost elements were material, tooling, and labor.

Suarez, J. A.↗
NASA NTRS1980

Three dimensional finite element analysis of layered fiber-reinforced composite materials

A three-dimensional finite element analysis was performed for a biaxially loaded composite laminate (with a centered hole) consisting of several fiber-reinforced composite layers each with a specified fiber orientation. The detailed stress distribution around the hole was determined. Also, the locations of initial damage zones due to different failure mechanisms were indicated.

Lee, J. D.↗
DOE OSTI2023

Round-Robin Interlaboratory Study on Rare-Earth Elements in U.S.-Based Geologic Materials

In a study funded by the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL), the University of North Dakota (UND) Energy and Environmental Research Center (EERC) performed a first-of-its-kind round-robin interlaboratory study (RRIS) to determine lab-to-lab and method-to-method variability in analyzing the rare earth element (REE) content of domestic resources. Analyses of REEs on eleven different materials were accomplished by the laboratories using four different procedures: ASTM D6357 (Procedure A), ASTM D4503 (Procedure B), an alternate in-house procedure for digestion and REE analysis (Procedure C), and neutron activation analysis (NAA). The results of the RRIS suggest that NAA is the most accurate and reliable method for many of the REEs in these types of materials; however, the method is limited in that it is able to determining only ten of the sixteen REEs. Five of the seven labs reporting data for Procedure A and three of the five labs reporting for Procedure B showed excellent performance in terms of repeatability, reproducibility, agreement with NAA, and SRM recoveries based on AOAC International guidelines on method performance. This indicates that when strictly followed these methods are suitable for REE determination in most materials, although are subject to the overall capabilities and experience of individual laboratories.

58 GEOSCIENCES↗
DOE OSTI2025

Plumbene: a comprehensive review of theoretical and experimental advances

Plumbene, a two-dimensional (2D) material consisting of a single layer of lead (Pb) atoms in a honeycomb lattice, stands as a pioneering addition to the elemental 2D material family. Here, this comprehensive review encapsulates the theoretical predictions and experimental advancements that underscore its potential. With properties shaped by significant spin-orbit coupling and structural buckling, plumbene offers a playground for phenomena like the quantum spin Hall effect, superconductivity, and topological phase transitions. Despite promising theoretical insights, experimental realization has encountered challenges, primarily due to high reactivity of Pb and the need for precise fabrication conditions. This paper critically examines the electronic, thermal, mechanical, and topological attributes of plumbene, alongside synthesis methods, functionalization techniques, and substrate effects. It further proposes directions for addressing synthesis challenges and integrating plumbene into advanced technologies, particularly in electronic, spintronic, and quantum computing applications. This review aims to bridge the gap between theoretical potential and experimental progress, fostering a deeper understanding of this intriguing material.

2D materials↗
NASA NTRS1993

On the composition of neuKREEP: QMD contamination at Apollo 11?

The Group A basalts of Apollo 11 differ in many respects from other high-Ti basalts of the region. Chemically, they are the only high-K (greater than 2000 ppm K) variety of high-Ti basalt and are enriched in incompatible trace elements relative to other basalts from both the Apollo 11 and Apollo 17 sites. In addition, Group A basalts are the youngest of all high-Ti basalts, with an age of 3.56 +/- 0.02 Ga. The cluster of compositions is consistent with the Apollo 11 Group A basalts representing a single flow. Papanastassiou et al. have also indicated the uniqueness of these basalts, based particularly on relatively young Rb-Sr model ages (3.8 - 3.9 Ga). A model for the formation of the Group A basalts was presented by Jerde et al., wherein the Apollo 17 orange volcanic glass is the parent liquid. Fractionation of this composition, coupled with the assimilation of incompatible-element-rich material, results in compositions akin to those of the Apollo 11 Group A basalt population. Orange glass of similar major-element composition is present at the Apollo 11 site as well, although complete trace element analyses are not available. New modelling results using the Apollo 11 orange glass major elements are grossly similar to those obtained using the Apollo 17 orange glass, indicating approximately 30 percent fractionation.

Jerde, Eric A.↗
NASA NTRS1974

Calculations of the moon's heat history at different concentrations of radioactive elements taking account of the material differentiation with melting

A mathematical procedure for analyzing the heat conductivity of the lunar surface is discussed. The solution is based on homogeneous and laminated moon models and considers the effects of radioactive elements conveyed to the lunar surface by melting. The various parameters which introduce uncertainties into the numerical analysis are identified. The application of data obtained from radio astronomy and from analyses of lunar samples returned by the Apollo flights is explained. Tables of data are included to show the types and amounts of radioactive materials which have been identified.

Arnatskaya, O. I.↗