SEARCH · Engineering Papers
Results for “efficiencies”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparative Neutron Detection Efficiency in He-3 Proportional Counters and Liquid Scintillators
We present new results on the neutron detection efficiency of detection systems based on He-3 proportional counters compared to organic liquid scintillators. The experiments were conducted using a well-characterized Cf-252 neutron source, measured bare, and shielded with slabs of polyethylene. The results show that the intrinsic neutron detection efficiency for the bare source is approximately 25% for the He-3 system, and 67% for the liquid scintillator system. When polyethylene sheets were used to shield the source in 2.54 cm increments, the neutron detection efficiency of both systems decreased exponentially to approximately 10% for the case of 25.4 cm. Experimental results were simulated using MCNPX-PoliMi and good agreement was found between measurement and simulation results for all the cases considered here.
Efficient Algorithms for Estimating the Absorption Spectrum within Linear Response TDDFT
We present a special symmetric Lanczos algorithm and a kernel polynomial method (KPM) for approximating the absorption spectrum of molecules within the linear response time-dependent density functional theory (TDDFT) framework in the product form. In contrast to existing algorithms, the new algorithms are based on reformulating the original non-Hermitian eigenvalue problem as a product eigenvalue problem and the observation that the product eigenvalue problem is self-adjoint with respect to an appropriately chosen inner product. This allows a simple symmetric Lanczos algorithm to be used to compute the desired absorption spectrum. The use of a symmetric Lanczos algorithm only requires half of the memory compared with the nonsymmetric variant of the Lanczos algorithm. The symmetric Lanczos algorithm is also numerically more stable than the nonsymmetric version. The KPM algorithm is also presented as a low-memory alternative to the Lanczos approach, but the algorithm may require more matrix-vector multiplications in practice. We discuss the pros and cons of these methods in terms of their accuracy as well as their computational and storage cost. Applications to a set of small and medium-sized molecules are also presented.
Efficient Unassisted Overall Photocatalytic Seawater Splitting on GaN-Based Nanowire Arrays
Large-scale, clean, efficient and sustainable hydrogen production from water is one of the major goal in solar-to-fuel conversion as the sun and water represent the two most abundant and geographically-balanced free resources available on Earth. Considering that most of the liquid water available on Earth’s surface is present in the form of seawater, H 2 generation from seawater splitting is highly desirable for large-scale practical and economical application. Herein, we report on the first demonstration of direct efficient overall solar-driven seawater splitting on p-GaN-based nanowire-arrays without any external bias or sacrificial agents from various types of simulated seawater solutions. As a result, a stable solar-to-hydrogen (STH) conversion efficiency of 1.9% was obtained under concentrated irradiation, demonstrating its possible utilization for large-scale, environmental-friendly and sustainable generation of clean solar fuel.
Minimizing Current and Voltage Losses to Reach 25% Efficient Monolithic Two-Terminal Perovskite–Silicon Tandem Solar Cells
The rapid rise in efficiency and tunable bandgap of metal-halide perovskites makes them highly attractive for use in tandems on silicon. Recently we demonstrated a perovskite–silicon monolithic two-terminal tandem with 23.6% power conversion efficiency. Here, we present work on optical optimization to improve light harvesting that includes thinning out the top transparent electrode to reduce front-surface reflection and parasitic absorption; introducing metal fingers to minimize series resistance losses; and further minimizing reflection loss with a polydimethylsiloxane (PDMS) stamp with random, pyramidal texture. Additionally, to reduce voltage loss while achieving current matching, we employ poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) as a hole transport material instead of NiO x and a wider 1.68 eV bandgap perovskite composition. Furthermore, these optimizations boost the open-circuit voltage to 1.77 V and the short-circuit current density to 18.4 mA/cm 2 , culminating in a 25% efficient perovskite–silicon tandem with a 1 cm 2 active area.
Size and Structure Matter: Enhanced CO 2 Photoreduction Efficiency by Size-Resolved Ultrafine Pt Nanoparticles on TiO 2 Single Crystals
A facile development of highly efficient Pt-TiO 2 nanostructured films via versatile gas-phase deposition methods is described. The films have a unique one-dimensional (1D) structure of TiO 2 single crystals coated with ultrafine Pt nanoparticles (NPs, 0.5–2 nm) and exhibit extremely high CO 2 photoreduction efficiency with selective formation of methane (the maximum CH 4 yield of 1361 μmol/g-cat/h). The fast electron-transfer rate in TiO 2 single crystals and the efficient electron–hole separation by the Pt NPs were the main reasons attributable for the enhancement, where the size of the Pt NPs and the unique 1D structure of TiO 2 single crystals played an important role.
Core–Shell Covalently Linked Graphitic Carbon Nitride–Melamine–Resorcinol–Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO 2 Reduction to Methanol
Photocatalytic reduction of CO 2 with light and H 2 O to form CH 3 OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmental unfriendly, toxic metals limit their applicability. Here, we report a metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C 3 N 4 , CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Cova-lent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt.% CN, a CH 3 OH yield of 0.99 μmol·h -1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with XPS, TEM, and bulk and surface elemental analyses supported a core-shell structure and charge transfer at C-N bond at the CN-MRF interface between the methoxy group in the 2,4-trishydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in the CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of photo-excited internal charge transferred from CN to hy-droxymethylamino group in MRF, whose amino group was the catalytic site for CO 2 photocatalytic reduction to CH 3 OH. Furthermore, this study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response
Energy-efficient Mott activation neuron for full-hardware implementation of neural networks
To circumvent the von Neumann bottleneck, substantial progress has been made towards in-memory computing with synaptic devices. However, compact nanodevices implementing non-linear activation functions are required for efficient full-hardware implementation of deep neural networks. Here, in this work, we present an energy-efficient and compact Mott activation neuron based on vanadium dioxide and its successful integration with a conductive bridge random access memory (CBRAM) crossbar array in hardware. The Mott activation neuron implements the rectified linear unit function in the analogue domain. The neuron devices consume substantially less energy and occupy two orders of magnitude smaller area than those of analogue complementary metal–oxide semiconductor implementations. The LeNet-5 network with Mott activation neurons achieves 98.38% accuracy on the MNIST dataset, close to the ideal software accuracy. We perform large-scale image edge detection using the Mott activation neurons integrated with a CBRAM crossbar array. Our findings provide a solution towards large-scale, highly parallel and energy-efficient in-memory computing systems for neural networks.
Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells
The energy landscape of reduced-dimensional perovskites (RDPs) can be tailored by adjusting their layer width (n). Recently, 2D/3D heterostructures containing n = 1 and 2 RDPs have produced PSCs with > 25% power conversion efficiency (PCE). Unfortunately, this method does not translate to inverted PSCs due to electron blocking at the 2D/3D interface. Here we report a method to increase the layer width of RDPs in 2D/3D heterostructures in order to address this problem. We discover that bulkier organics form 2D heterostructures more slowly, resulting in wider RDPs; and that small modifications to ligand design induce preferential growth of n ≥ 3 RDPs. Levering these insights, we developed efficient inverted PSCs (certified 23.91% quasi-steady state efficiency). Furthermore, unencapsulated devices operate at room temperature and ~50% relative humidity for over 1000 hrs without loss of PCE; and, when subjected to ISOS-L3 accelerated aging encapsulated devices retain 92% of PCE after 500 hrs.
Triphenylamine/benzothiadiazole-based compounds for non-doped orange and red fluorescent OLEDs with high efficiencies and low efficiency roll-off
Long-wavelength materials are key for development of pure-color and white organic light-emitting devices (OLEDs). An organic molecule, combining hybridized local electron and charge-transfer (HLCT) states and aggregation-induced emission (AIE), not only breaks the 5% external quantum efficiency (EQE) limit but also overcomes emission quenching. Herein, we designed and synthesized four novel donor–acceptor compounds of TBAN, TBT, TBAT, and TABAT using triphenylamine (TPA) as the donor, benzothiadiazole (BT) as the acceptor, and anthracene (AN) as a bridge. We found that the emission peaks of TBAN, TBT, TBAT and TABAT are located at 596, 615, 580 and 546 nm, respectively. We successfully applied them to non-doped OLEDs, and the resulting devices exhibited excellent performance. For example, the optimal TBAN-based OLEDs showed a maximum luminance of 74 820 cd m –2 , a current efficiency of 12.1 cd A –1 and a maximum EQE of 5.7% with low roll-off. Additionally, the device with TBAN as both the emitter and hole-transport material also exhibited high efficiency that is comparable to that of an NPB-based device. Furthermore, this work demonstrates that it is feasible to obtain excellent orange and red emitters by employing BT- and TPA-based D–A architectures.
Simulation study of 3–5 keV x-ray conversion efficiency from Ar K-shell vs. Ag L-shell targets on the National Ignition Facility laser
Tailored, high-flux, multi-keV x-ray sources are desirable for studying x-ray interactions with matter for various civilian, space and military applications. For this study, we focus on designing an efficient laser-driven non-local thermodynamic equilibrium 3–5 keV x-ray source from photon-energy-matched Ar K-shell and Ag L-shell targets at sub-critical densities (∼n{sub c}/10) to ensure supersonic, volumetric laser heating with minimal losses to kinetic energy, thermal x rays and laser-plasma instabilities. Using HYDRA, a multi-dimensional, arbitrary Lagrangian-Eulerian, radiation-hydrodynamics code, we performed a parameter study by varying initial target density and laser parameters for each material using conditions readily achievable on the National Ignition Facility (NIF) laser. We employ a model, benchmarked against Kr data collected on the NIF, that uses flux-limited Lee-More thermal conductivity and multi-group implicit Monte-Carlo photonics with non-local thermodynamic equilibrium, detailed super-configuration accounting opacities from CRETIN, an atomic-kinetics code. While the highest power laser configurations produced the largest x-ray yields, we report that the peak simulated laser to 3–5 keV x-ray conversion efficiencies of 17.7% and 36.4% for Ar and Ag, respectively, occurred at lower powers between ∼100–150 TW. For identical initial target densities and laser illumination, the Ag L-shell is observed to have ≳10× higher emissivity per ion per deposited laser energy than the Ar K-shell. Although such low-density Ag targets have not yet been demonstrated, simulations of targets fabricated using atomic layer deposition of Ag on silica aerogels (∼20% by atomic fraction) suggest similar performance to atomically pure metal foams and that either fabrication technique may be worth pursuing for an efficient 3–5 keV x-ray source on NIF.
High Performance Computing and analysis-led development of high efficiency dilute opposed piston gasoline engine
Explore the source record for details and available documents.
Design and global optimization of high-efficiency solar thermal systems with tungsten cermets
Solar thermal, thermoelectric, and thermophotovoltaic (TPV) systems have high maximum theoretical efficiencies; experimental systems fall short because of losses by selective solar absorbers and TPV selective emitters. To improve these critical components, we study a class of materials known as cermets. While our approach is completely general, the most promising cermet candidate combines nanoparticles of silica and tungsten. We find that 4-layer silica-tungsten cermet selective solar absorbers can achieve thermal transfer efficiencies of 84.3% at 400 K, and 75.59% at 1000 K, exceeding comparable literature values. Three layer silica-tungsten cermets can also be used as selective emitters for InGaAsSb-based thermophotovoltaic systems, with projected overall system energy conversion efficiencies of 10.66% at 1000 K using realistic design parameters. The marginal benefit of adding more than 4 cermet layers is small (less than 0.26%, relative).
Evaluating tradeoffs between energy efficiency and color rendition
Color rendition and energy efficiency have long been considered characteristics of light sources that cannot be maximized simultaneously. The tradeoff has been studied extensively, but usually considering only average color fidelity. This work examines the color rendition versus energy efficiency tradeoff in the context of ANSI/IES TM-30-18, Method for Evaluating Light Source Color Rendition, which provides numerous measures beyond average color fidelity. The analysis demonstrates that color rendition criteria based on combinations of ANSI/IES TM-30-18 values can be used to improve color quality with less of an effect on spectral efficiency (luminous efficacy of radiation) than increasing CIE Ra alone. No change in the direction of LED emitter or downconverter development is needed.
Alternative and Emerging Technologies for an Energy-Efficient, Water-Efficient, and Low-Pollution Textile Industry
Emerging energy-efficiency, greenhouse gas (GHG), and pollution mitigation technologies will be crucial for the textile industry as it responds to population and economic growth that is expected to spur a rapid increase in textile consumption over the coming decades and a corresponding increase in the industry’s absolute energy use and GHG and other pollutant emissions. This report gives an overview of textile industry processes and compiles available information on the energy savings, environmental and other benefits, costs, commercialization status, and references for 18 emerging technologies to reduce the industry’s energy use and environmental emissions. Although studies from around the world identify a variety of sector specific and cross-cutting energy-efficiency technologies that have already been commercialized for the textile industry, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized or at the very early stage of adoption. This report is intended to be a resource on these emerging technologies for engineers, researchers, investors, textile manufacturers, policy makers, and other interested parties.
Deferred Payment Loans for Energy Efficiency: Case Study of a Low- and Moderate-Income Home Improvement Financing Model and Potential Application to Energy Efficiency Projects
Energy efficiency can provide important benefits for low- and moderate-income households such as lower utility bills and healthier, more comfortable homes, but the upfront costs of efficiency improvements are often a barrier. Extending financing to these households can help overcome this barrier but presents its own challenges, including the financial burden of monthly payments and the risk of incurring the repercussions of nonpayment. The deferred payment loan model can give low- and moderate-income households access to energy efficiency without the financial burden of monthly payments while mitigating the risk of nonpayment. From a program sponsor perspective, when grant funds are limited or unavailable, the model provides certain advantages of both grants and financing. Like a grant, target recipients have minimal risk, but like a loan, funds can serve multiple participants since the funding can be revolved. Organizations in several parts of the country have employed the model to provide safe, healthy homes by paying for home repair and home improvement. This case study provides a detailed overview of the deferred payment loan program for home improvements known as the Home Repair Program run by the Opportunity Council, a Community Action Agency (CAA) serving three counties in Washington State. This case study also considers two other CAA-administered deferred payment loan programs – one in Wisconsin and another in Michigan.
MFVI Energy Efficiency Audit Training - Module 1.1: Introduction to Efficient Lighting [Slides]
This guide is designed to help trained energy efficiency professionals conduct an energy efficiency audit for commercial and industrial buildings, particularly for micro-, small-, and medium-sized businesses in Mexico. This guide is focused on auditing lighting systems. As such, it will assist its user in determining the optimal lighting for a given space and then identifying the most efficient means of delivering that lighting.