Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed reinforcement learning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Adaptive, Distributed Control of Constrained Multi-Agent Systems

Product Distribution (PO) theory was recently developed as a broad framework for analyzing and optimizing distributed systems. Here we demonstrate its use for adaptive distributed control of Multi-Agent Systems (MASS), i.e., for distributed stochastic optimization using MAS s. First we review one motivation of PD theory, as the information-theoretic extension of conventional full-rationality game theory to the case of bounded rational agents. In this extension the equilibrium of the game is the optimizer of a Lagrangian of the (Probability dist&&on on the joint state of the agents. When the game in question is a team game with constraints, that equilibrium optimizes the expected value of the team game utility, subject to those constraints. One common way to find that equilibrium is to have each agent run a Reinforcement Learning (E) algorithm. PD theory reveals this to be a particular type of search algorithm for minimizing the Lagrangian. Typically that algorithm i s quite inefficient. A more principled alternative is to use a variant of Newton's method to minimize the Lagrangian. Here we compare this alternative to RL-based search in three sets of computer experiments. These are the N Queen s problem and bin-packing problem from the optimization literature, and the Bar problem from the distributed RL literature. Our results confirm that the PD-theory-based approach outperforms the RL-based scheme in all three domains.

Bieniawski, Stefan↗

PV Inverter Experimental Dataset Version 2 with 100 Percent Power

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. The PV inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.88 to 1.09 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59.4 Hz to 60.45 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

14 SOLAR ENERGY↗

Exact and Approximate Probabilistic Symbolic Execution

Probabilistic software analysis seeks to quantify the likelihood of reaching a target event under uncertain environments. Recent approaches compute probabilities of execution paths using symbolic execution, but do not support nondeterminism. Nondeterminism arises naturally when no suitable probabilistic model can capture a program behavior, e.g., for multithreading or distributed systems. In this work, we propose a technique, based on symbolic execution, to synthesize schedulers that resolve nondeterminism to maximize the probability of reaching a target event. To scale to large systems, we also introduce approximate algorithms to search for good schedulers, speeding up established random sampling and reinforcement learning results through the quantification of path probabilities based on symbolic execution. We implemented the techniques in Symbolic PathFinder and evaluated them on nondeterministic Java programs. We show that our algorithms significantly improve upon a state-of- the-art statistical model checking algorithm, originally developed for Markov Decision Processes.

Symbolic Execution↗

Split phase inverter data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 8.35 kW off-the-shelf grid following split phase PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.9 to 1.1 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59 Hz to 61 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

NREL/SCE High-Penetration PV Integration Project: Report on Field Demonstration of Advanced Inverter Functionality in Fontana, CA

The National Renewable Energy Laboratory/Southern California Edison High-Penetration PV Integration Project is (1) researching the distribution system level impacts of high-penetration photovoltaic (PV) integration, (2) determining mitigation methods to reduce or eliminate those impacts, and (3) seeking to demonstrate these mitigation methods on actual high-penetration PV distribution circuits. This report describes a field demonstration completed during the fall of 2013 on the Fontana, California, study circuit, which includes a total of 4.5 MW of interconnected utility-scale rooftop PV systems. The demonstration included operating a 2-MW PV system at an off-unity power factor that had been determined during previously completed distribution system modeling and PV impact assessment analyses. Data on the distribution circuit and PV system operations were collected during the 2-week demonstration period. This demonstration reinforces the findings of previous laboratory testing that showed that utility-scale PV inverters are capable of operating at off-unity power factor to mitigate PV impacts; however, because of difficulties setting and retaining PV inverter power factor set points during the field demonstration, it was not possible to demonstrate the effectiveness of off-unity power factor operation to mitigate the voltage impacts of high-penetration PV integration. Lessons learned from this field demonstration are presented to inform future field demonstration efforts.

14 SOLAR ENERGY↗

CityLearn v2: energy-flexible, resilient, occupant-centric, and carbon-aware management of grid-interactive communities

As more distributed energy resources become part of the demand-side infrastructure, quantifying their energy flexibility on a community scale is crucial. CityLearn v1 provided an environment for benchmarking control algorithms. However, there is no standardized environment utilizing realistic building-stock datasets for distributed energy resource control benchmarking without co-simulation or third-party frameworks. CityLearn v2 extends CityLearn v1 by providing a stand-alone simulation environment that leverages the End-Use Load Profiles for the U.S. Building Stock dataset to create grid-interactive communities for resilient, multi-agent, and objective control of distributed energy resources with dynamic occupant feedback. While the v1 environment used pre-simulated building thermal loads, the v2 environment uses data-driven thermal dynamics and eliminates the need for co-simulation with building energy performance software. This work details the v2 environment and provides application examples that use reinforcement learning control to manage battery energy storage system, vehicle-to-grid control, and thermal comfort during heat pump power modulation.

Nweye, Kingsley↗

Learning with Delayed Rewards—A Case Study on Inverse Defect Design in 2D Materials

Defect dynamics in materials are of central importance to a broad range of technologies from catalysis to energy storage systems to microelectronics. Material functionality depends strongly on the nature and organization of defects-their arrangements often involve intermediate or transient states that present a high barrier for transformation. The lack of knowledge of these intermediate states and the presence of this energy barrier presents a serious challenge for inverse defect design, especially for gradient-based approaches. Here, we present a reinforcement learning (RL) [Monte Carlo Tree Search (MCTS)] based on delayed rewards that allow for efficient search of the defect configurational space and allows us to identify optimal defect arrangements in low-dimensional materials. Using a representative case of two-dimensional MoS 2 , we demonstrate that the use of delayed rewards allows us to efficiently sample the defect configurational space and overcome the energy barrier for a wide range of defect concentrations (from 1.5 to 8% S vacancies)-the system evolves from an initial randomly distributed S vacancies to one with extended S line defects consistent with previous experimental studies. Detailed analysis in the feature space allows us to identify the optimal pathways for this defect transformation and arrangement. Comparison with other global optimization schemes like genetic algorithms suggests that the MCTS with delayed rewards takes fewer evaluations and arrives at a better quality of the solution. The implications of the various sampled defect configurations on the 2H to 1T phase transitions in MoS 2 are discussed. In this study, we introduce a RL strategy employing delayed rewards that can accelerate the inverse design of defects in materials for achieving targeted functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel LDPP-MADDPG Approach for Distributed Power Allocation in mmWave Cellular Networks

This paper considers the problem of distributed beam scheduling and power allocation problem in millimeter- Wave (mmWave) cellular networks, in which multiple Base Stations (BSs) operate as individual operators over a shared spectrum. We propose a novel learning-aided approach that integrates the Lyapunov Drift-Plus-Penalty (LDPP) framework and Multi-agent Deep Deterministic Policy Gradient (MADDPG) reinforcement learning algorithms. This offers a powerful approach to learning stable and constraint-aware policies, reaping the joint benefit of both LDPP and MADDPG, in complex multiagent environments. The major challenge for this approach is to integrate these two approaches in a meaningful and effective manner. The key idea to solve this problem is to introduce a novel feature of local observation that incorporates potential negative value of the reward function due to the stochastic constraints introduced by the LDPP framework. Empirical results demonstrate that our proposed scheme outperforms the baseline methods under various conditions.

99 - GENERAL AND MISCELLANEOUS↗

Joint Spectrum Access and Power Control in Air-Air Communications - A Deep Reinforcement Learning Based Approach

This paper considers the dynamic spectrum access and power control problem in a single-hop point-to-point Air-Air Communication Network (AACN). Due to spectrum scarcity, we assume the number of Aircraft-to-Aircraft (A2A) communication links is greater than that of the available channels, such that some communication links need to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the Weighted Sum Spectral Efficiency (WSSE). A distributed and dynamic deep Q learning-based algorithm is proposed to find the optimal solution. Specifically, we design two different policies that are trained by conducting a trial-and-error scheme. Each communication link can achieve the optimal policy by exploiting the local information from its neighbors, and this distributive approach make it scalable to large networks. Finally, our experimental results demonstrate the effectiveness of the proposed solution in various AACN scenarios.

Zhe Wang↗

Joint Spectrum Access and Power Control in Air-Air Communications - A Deep Reinforcement Learning Based Approach

This paper considers the dynamic spectrum access and power control problem in a single-hop point-to-point Air-Air Communication Network (AACN). Due to spectrum scarcity, we assume the number of Aircraft-to-Aircraft (A2A) communication links is greater than that of the available channels, such that some communication links need to share the same channel, causing co-channel interference. We formulate the joint channel selection and power control optimization problem to maximize the Weighted Sum Spectral Efficiency (WSSE). A distributed and dynamic deep Q learning-based algorithm is proposed to find the optimal solution. Specifically, we design two different policies that are trained by conducting a trial-and-error scheme. Each communication link can achieve the optimal policy by exploiting the local information from its neighbors, and this distributive approach make it scalable to large networks. Finally, our experimental results demonstrate the effectiveness of the proposed solution in various AACN scenarios.

Zhe Wang↗

Quantum-Inspired Bayesian Sampling for Uncertainty Quantification and Machine Learning (Final Technical Report)

With increasing simulation and measurement data, machine learning and artificial intelligence have been widely used in computational decision-making of complex engineering systems. The resulting tools, such as uncertainty quantification solvers, reinforcement learning, and physics-informed machine learning, have achieved great success in critical DOE tasks such as material discovery and design, energy system modeling and control, and numerical weather and climate prediction. A core topic in scientific machine learning and artificial intelligence is Bayesian inference: given an observed data set, people want to estimate the posterior distribution of a (possibly large) number of hidden parameters. Due to the flexibility and weak assumptions, Bayesian sampling has been the mainstream Bayesian inference solvers despite the rapid progress of approximate Bayesian inference. Classical Bayesian sampling methods such as Markov-chain Monte Carlo suffer from a low-acceptance rate due to the random walk nature, therefore state-of-the-art techniques use Hamiltonian Monte Carlo and its variants to efficiently draw posterior samples in a high dimension. The key idea of Hamiltonian Monte Carlo and its variants is to simulate the Hamiltonian dynamics of a classical particle with a fixed mass, and their performance significantly degrades when the posterior distribution is highly spiky or has multiple modes. Leveraging the idea of quantum physics, this project has investigated new theory, algorithms and applications of Bayesian inference (especially Bayesian sampling). The main results include: (1) novel quantum-inspired Bayesian sampling methods that can lead to better accuracy for challenging multi-modal or spiky distributions, (2) more scalable machine learning framework leveraging tensor-compressed Bayesian inference, and (3) Bayesian and sampling approaches for verifying the robustness of continuous and binary neural networks.

97 MATHEMATICS AND COMPUTING↗

Machine Learning Solutions for a Stable Grid Recovery

Grid operating security studies are typically employed to establish operating boundaries, ensuring secure and stable operation for a range of operation under NERC guidelines. However, if these boundaries are severely violated, existing system security margins will be largely unknown, as would be a secure incremental dispatch path to higher security margins while continuing to serve load. As an alternative to the use of complex optimizations over dynamic conditions, this work employs the use of machine learning to identify a sequence of secure state transitions which place the grid in a higher degree of operating security with greater static and dynamic stability margins. Several reinforcement learning solution methods were developed using deep learning neural networks, including Deep Q-learning, Mu-Zero, and the continuous algorithms Proximal Reinforcement Learning, and Advantage Actor Critic Learning. The work is demonstrated on a power grid with three control dimensions but can be scaled in size and dimensionality, which is the subject of ongoing research.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Reinforcement learning in discrete action space applied to inverse defect design

Abstract Reinforcement learning (RL) algorithms that include Monte Carlo Tree Search (MCTS) have found tremendous success in computer games such as Go, Shiga and Chess. Such learning algorithms have demonstrated super-human capabilities in navigating through an exhaustive discrete action search space. Motivated by their success in computer games, we demonstrate that RL can be applied to inverse materials design problems. We deploy RL for a representative case of the optimal atomic scale inverse design of extended defects via rearrangement of chalcogen (e.g. S) vacancies in 2D transition metal dichalcogenides (e.g. MoS 2 ). These defect rearrangements and their dynamics are important from the perspective of tunable phase transition in 2D materials i.e. 2H (semi-conducting) to 1T (metallic) in MoS 2 . We demonstrate the ability of MCTS interfaced with a reactive molecular dynamics simulator to efficiently sample the defect phase space and perform inverse design—starting from randomly distributed S vacancies, the optimal defect rearrangement of defects corresponds a line defect of S vacancies. We compare MCTS performance with evolutionary optimization i.e. genetic algorithms and show that MCTS converges to a better optimal solution (lower objective) and in fewer evaluations compared to GA. We also comprehensively evaluate and discuss the effect of MCTS hyperparameters on the convergence to solution. Overall, our study demonstrates the effectives of using RL approaches that operate in discrete action space for inverse defect design problems.

42 ENGINEERING↗

Autonomous Cyber Defense Against Dynamic Multi-strategy Infrastructural DDoS Attacks

Dynamic Infrastructural Distributed Denial of Service (I-DDoS) attacks constantly change attack vectors to congest core backhaul links and disrupt critical network availability while evading end-system defenses. To effectively counter these highly dynamic attacks, defense mechanisms need to exhibit adaptive decision strategies for real-time mitigation. This paper presents a novel Autonomous DDoS Defense framework that employs model-based reinforcement agents. The framework continuously learns attack strategies, predicts attack actions, and dynamically determines the optimal composition of defense tactics such as filtering, limiting, and rerouting for flow diversion. Our contributions include extending the underlying formulation of the Markov Decision Process (MDP) to address simultaneous DDoS attack and defense behavior, and accounting for environmental uncertainties. We also propose a fine-grained action mitigation approach robust to classification inaccuracies in Intrusion Detection Systems (IDS). Additionally, our reinforcement learning model demonstrates resilience against evasion and deceptive attacks. Evaluation experiments using real-world and simulated DDoS traces demonstrate that our autonomous defense framework ensures the delivery of approximately 96 - 98% of benign traffic despite the diverse range of attack strategies.

Dutta, Ashutosh↗

PV inverter experimental data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Due to the limitations of the DC supply used, inverter is tested under 75%, 50%, 25% load conditions (This dataset does not contain 100% load condition). In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.88 to 1.09 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59.4 Hz to 60.45 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Learning to Unknot

We introduce natural language processing into the study of knot theory, as made natural by the braid word representation of knots. We study the UNKNOT problem of determining whether or not a given knot is the unknot. After describing an algorithm to randomly generate N-crossing braids and their knot closures and discussing the induced prior on the distribution of knots, we apply binary classification to the UNKNOT decision problem. We find that the Reformer and shared-QK Transformer network architectures outperform fully-connected networks, though all perform at 95% accuracy. Perhaps surprisingly, we find that accuracy increases with the length of the braid word, and that the networks learn a direct correlation between the confidence of their predictions and the degree of the Jones polynomial. Finally, we utilize reinforcement learning (RL) to find sequences of Markov moves and braid relations that simplify knots and can identify unknots by explicitly giving the sequence of unknotting actions. Trust region policy optimization (TRPO) performs consistently well, reducing 80% of the unknots with up to 96 crossings we tested to the empty braid word, and thoroughly outperformed other RL algorithms and random walkers. Studying these actions, we find that braid relations are more useful in simplifying to the unknot than one of the Markov moves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Battery inverter experimental data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 30 kW off-the-shelf grid following battery inverter in the experiments. We used controllable AC supply and controllable DC supply to emulate AC and DC side characteristics. The experiments were performed at NREL's Energy Systems Integration Facility. Inverter is tested under 100%, 75%, 50%, 25% load conditions. In the first dataset, for each operating condition, controllable AC source voltage is varied from 0.9 to 1.1 per unit (p.u) with a step value of 0.025 p.u while keeping the frequency at 60 Hz. In the second dataset, under similar load conditions (100%, 75%, 50%, 25% ), the frequency of the controllable AC source voltage was varied from 59 Hz to 61 Hz with a step value of 0.2 Hz. Voltage and frequency range is chosen based on inverter protection. Voltages and currents on DC and AC side are included in the dataset.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Tour of the World’s Largest 3D Printed Polymer Structure on Display at IBS 2016

ORNL’s Johney Green guides a Periscope tour of the 3D printed house and vehicle demonstration called AMIE (Additive Manufacturing Integrated Energy) during the International Builders’ Show 2016 in Las Vegas. See the world’s largest 3D printed polymer structure – made with carbon fiber reinforced ABS plastic, insulated with next-generation vacuum insulation panels, and outfitted with a micro-kitchen by GE Appliances – that was designed to be powered by a 3D printed utility vehicle using bidirectional wireless power technology. Learn more about AMIE at https://www.youtube.com/watch?v=RCkQB... and http://www.ornl.gov/amie.

24 POWER TRANSMISSION AND DISTRIBUTION↗