SEARCH · Engineering Papers

Results for “dispersion function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1995

A diagnostic analysis of the VVP single-doppler retrieval technique

A diagnostic analysis of the VVP (volume velocity processing) retrieval method is presented, with emphasis on understanding the technique as a linear, multivariate regression. Similarities and differences to the velocity-azimuth display and extended velocity-azimuth display retrieval techniques are discussed, using this framework. Conventional regression diagnostics are then employed to quantitatively determine situations in which the VVP technique is likely to fail. An algorithm for preparation and analysis of a robust VVP retrieval is developed and applied to synthetic and actual datasets with high temporal and spatial resolution. A fundamental (but quantifiable) limitation to some forms of VVP analysis is inadequate sampling dispersion in the n space of the multivariate regression, manifest as a collinearity between the basis functions of some fitted parameters. Such collinearity may be present either in the definition of these basis functions or in their realization in a given sampling configuration. This nonorthogonality may cause numerical instability, variance inflation (decrease in robustness), and increased sensitivity to bias from neglected wind components. It is shown that these effects prevent the application of VVP to small azimuthal sectors of data. The behavior of the VVP regression is further diagnosed over a wide range of sampling constraints, and reasonable sector limits are established.

Boccippio, Dennis J.↗

NASA NTRS1983

Surface roughness effects with solid lubricants dispersed in mineral oils

The lubricating effectiveness of solid-lubricant dispersions are investigated in both point and line contacts using surfaces with both random and directional roughness characteristics. Friction and wear data obtained at relatively low speeds and at room temperature, indicate that the existence of solid lubricants such as graphite, MoS2, and PTFE in a plain mineral oil generally will not improve the effectiveness of the oil as a lubricant for such surfaces. Under boundary lubrication conditions, the friction force, as a function of time, initially depends upon the directional roughness properties of the contacting surfaces irrespective of whether the base oil or dispersions are used as lubricants.

Cusano, C.↗

NASA NTRS2007

Quantifiable Assessment of SWNT Dispersion in Polymer Composites

NASA LaRC has established a new protocol for visualizing the nanomaterials in structural polymer matrix resins. Using this new technique and reconstructing the 3D distribution of the nanomaterials allows us to compare this distribution against a theoretically perfect distribution. Additional tertiary structural information can now be obtained and quantified with the electron tomography studies. These tools will be necessary to establish the structural-functional relationships between the nano and the bulk. This will also help define the critical length scales needed for functional properties. Field ready tool development and calibration can begin by using these same samples and comparing the response. i.e. gold standards of good and bad dispersion.

Park, Cheol↗

NASA NTRS1972

Binary chromatographic data and estimation of adsorbent porosities

Data for the system n-pentane/n-heptane on porous Chromosorb-102 adsorbent were obtained at 150, 175, and 200 C for mixtures containing zero to 100% n-pentane by weight. Prior results showing limitations on superposition of pure component data to predict multicomponent chromatograms were verified. The thermodynamic parameter MR0 was found to be a linear function of sample composition. A nonporous adsorbent failed to separate the system because of large input sample dispersions. A proposed automated data processing scheme involving magnetic tape recording of the detector signals and processing by a minicomputer was rejected because of resolution limitations of the available a/d converters. Preliminary data on porosity and pore size distributions of the adsorbents were obtained.

Meisch, A. J.↗

NASA NTRS1985

Characterization of carbon fibers and fiber-matrix adhesion in composites

The effect of fiber/matrix interactions on the mechanical properties of thermoplastic carbon fiber composites was determined. The experimental approach was a multi-faceted one involving the following areas: characterization of the surface of carbon fibers using X-ray photoelectron spectroscopy (XPS), secondary ion mass spectroscopy (SIMS) and scanning transmission electron microcopy (STEM); determination of the functional groups on carbon fiber surfaces using an elemental tagging scheme - derivatization; determination of the polar and dispersion contribution to the surface energy of carbon fibers by measuring wetting forces in a series of liquids having known polar and dispersion components; and study of the interaction of thermoplastic polymers with carbon surfaces by solution adsorption, STEM and fiber critical length.

Wightman, J. P.↗

NASA NTRS1985

A simulation study of kilometric radiation generation along an auroral field line

A model for the high-altitude auroral zone is combined with local particle simulations in order to assess the quantitative implications of relativistic dispersion for the generation of auroral kilometric radiation. The auroral zone model is described, including the distribution functions for the primary and secondary electron populations and the variations of the total number density with altitude. The analysis shows that the most intense cyclotron maser emission should occur in the 1.75-2.0 R(E) altitude range. At lower altitudes, the secondary electrons are dominant, and the instability saturates at a low level. At higher altitudes, the energy of the primary electron is lower, and again the radiation level drops. The simulations indicate that linear growth rates of the order of 0.002 Omega(e) occur in this region and that the conversion of primary electron energy into AKR is about one percent.

Pritchett, P. L.↗

NASA NTRS1986

Parametric instabilities of the circularly polarized Alfven waves including dispersion

A class of parametric instabilities of large-amplitude, circularly polarized Alfven waves is considered in which finite frequency (dispersive) effects are included. The dispersion equation governing the instabilities is a sixth-order polynomial which is solved numerically. As a function of K identically equal to k/k-sub-0 (where k-sub-0 and k are the wave number of the 'pump' wave and unstable sound wave, respectively), there are three regionals of instability: a modulation instability at K less than 1, a decay instability at K greater than 1, and a relatively weak and narrow instability at K close to squared divided by v-sub-A squared (where c-sub-s and v-sub-A are the sound and Alfven speeds respectively), the modulational instability occurs when beta is less than 1 (more than 1) for left-hand (right-hand) pump waves, in agreement with the previous results of Sakai and Sonnerup (1983). The growth rate of the decay instability of left-hand waves is greater than the modulational instability at all values of beta. Applications to large-amplitude wave observed in the solar wind, in computer simulations, and in the vicinity of planetary and interplanetary collisionless shocks are discussed.

Wong, H. K.↗

NASA NTRS1988

An estimate of equatorial wave energy flux at 9- to 90-day periods in the Central Pacific

Deep fluctuations in current along the equator in the Central Pacific are dominated by coherent structures which correspond closely to narrow-band propagating equatorial waves. Currents were measured roughly at 1500 and 3000 m depths at five moorings between 144 and 148 deg W from January 1981 to March 1983, as part of the Pacific Equatorial Ocean Dynamics program. In each frequency band resolved, a single complex empirical orthogonal function accounts for half to three quarters of the observed variance in either zonal or meridional current. Dispersion for equatorial first meridional Rossby and Rossby gravity waves is consistent with the observed vertical-zonal coherence structure. The observations indicate that energy flux is westward and downward in long first meridional mode Rossby waves at periods 45 days and longer, and eastward and downward in short first meridional mode Rossby waves and Rossby-gravity waves at periods 30 days and shorter. A local minimum in energy flux occurs at periods corresponding to a maximum in upper-ocean meridional current energy contributed by tropical instability waves. Total vertical flux across the 9- to 90-day period range is 2.5 kW/m.

Eriksen, Charles C.↗

NASA NTRS1993

Space Station Freedom Beta Gimbal Control via Sensitivity Models

Tracking control of the Space Station Freedom solar array beta gimbals is investigated. Of particular interest is the issue of control in the presence of uncertainty in gimbal friction parameters. Sensitivity functions are incorporated into the feedback loop to desensitize the gimbal control law to parameter variations. Simulation results indicated that one such sensitivity function improves the closed-loop performance of the gimbals in the presence of unexpected friction parameter dispersions.

Schoenwald, David A.↗

NASA NTRS1994

The global atmospheric response to low-frequency tropical forcing: Zonally averaged basic states

The extratropical response to localized, low-frequency tropical forcing is examined using a linearized, non-divergent barotropic model on a sphere. Zonal-mean basic states characterized by solid-body rotation or critical latitudes are considered. An analytical analysis based on WKB and ray tracing methods shows that, in contrast to stationary Rossby waves, westward moving, low-frequency Rossby waves can propagate through the tropical easterlies into the extratropics. It is shown analytically that the difference between the stationary and low-frequency ray paths is proportional to the forcing frequency and inversely proportional to the zonal wavenumber cubed. An expression for the disturbance amplitude is derived that shows the ability of the forced waves to maintain their strength well into middle latitudes depends on their meridional wave scale and northward group velocity, both of which are functions of the slowly varying background flow. A local energetics analysis shows that the combination of energy dispersion from the forcing region and energy extraction from the equatorward flank of the midlatitude jet produces disturbances that have the greatest impact on the extratropical circulation. Under the assumption that the forcing amplitude is independent of frequency, this impact is largest when the tropical forcing period is in the range 10-20 days.

Li, Long↗

NASA NTRS2010

Bonding and Microstructural Stability in Ni55Ti45 Studied by Experimental and Theoretical Methods

Spiral orbit tribometry friction tests performed on Ni-rich Ni55Ti45 titanium ball bearings indicate that this alloy is a promising candidate for future aerospace bearing applications. Microstructural characterization of the bearing specimens was performed using transmission electron microscopy and energy dispersive spectroscopy, with NiTi, Ni4Ti3, Ni3Ti, and Ni2Ti4Ox phases identified within the microstructure of the alloy. Density functional theory was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Ultraviolet photoemission spectroscopy was used to verify the density of states results from the density functional theory calculations, with good agreement observed between experiment and theory.

Stott, Amanda C.↗

NASA NTRS2008

SIM PlanetQuest Spectral Calibration Development Unit Beam Combiner

The beam combiner of an astronomical long-baseline interferometer combines the two beams of starlight to form white-light fringes. We describe beam combiner in the SIM PlanetQuest Spectral Calibration Development Unit (SCDU). In addition to forming white light fringes, the beam combiner provides other functions such as separating the light for guiding, fringe tracking, and science measurement. It is designed to function over the optical bandpass 450-950 nm. Coating design is critical to beam combiner as residual dispersion and mismatches affect the ability to accurately measure the position of stars of varying spectral types.

stellar interferometer↗

NASA NTRS1990

A computationally efficient model for turbulent droplet dispersion in spray combustion

A novel model for turbulent droplet dispersion is formulated having significantly improved computational efficiency in comparison to the conventional point source stochastic sampling methodology. In the proposed model, a computational parcel representing a group of physical particles is considered to have a normal (Gaussian) probability density function (PDF) in three-dimensional space. The mean of each PDF is determined by Lagrangian tracking of each computational parcel, either deterministically or stochastically. The variance is represented by a turbulence-induced mean squared dispersion which is based on statistical inferences from the linearized direct modeling formulation for particle/eddy interactions. Convolution of the computational parcel PDF's produces a single PDF for the physical particle distribution profile. The validity of the new model is established by comparison with the conventional stochastic sampling method, where in each parcel is represented by a delta function distribution, for non-evaporating particles injected into simple turbulent air flows.

Litchford, Ron J.↗

NASA NTRS1988

Conditions for the validity of unmagnetized-plasma theory in describing weakly magnetized plasmas

The application of the unmagnetized-plasma theory to the derivation of the expression for the dielectric tensor for weakly magnetized plasmas is examined. The analysis of Baldwin et. al. (1969) is employed to determine the conditions under which the magnetic effects on the dielectric tensor of a plasma are small. The relation between wave and plasma parameters and the plasma distribution function is studied. Axisymmetric distribution functions in magnetized plasma are considered. The derived conditions are analyzed in terms of resonance ellipses of the cyclotron maser theory. Examples are presented in which the conditions are applied to a nonrelativistic Maxwellian distribution and the dispersion and instability of Langmuir and Bernstein waves in weakly magnetized plasma. The data reveal that the conditions under which the magnetic field can be completely neglected depend on the forms of the distribution function.

Robinson, P. A.↗

NASA NTRS1992

Numerical modeling for dilute and dense sprays

We have successfully implemented a numerical model for spray-combustion calculations. In this model, the governing gas-phase equations in Eulerian coordinate are solved by a time-marching multiple pressure correction procedure based on the operator-splitting technique. The droplet-phase equations in Lagrangian coordinate are solved by a stochastic discrete particle technique. In order to simplify the calculation procedure for the circulating droplets, the effective conductivity model is utilized. The k-epsilon models are utilized to characterize the time and length scales of the gas phase in conjunction with turbulent modulation by droplets and droplet dispersion by turbulence. This method entails random sampling of instantaneous gas flow properties and the stochastic process requires a large number of computational parcels to produce the satisfactory dispersion distributions even for rather dilute sprays. Two major improvements in spray combustion modelings were made. Firstly, we have developed a probability density function approach in multidimensional space to represent a specific computational particle. Secondly, we incorporate the Taylor Analogy Breakup (TAB) model for handling the dense spray effects. This breakup model is based on the reasonable assumption that atomization and drop breakup are indistinguishable processes within a dense spray near the nozzle exit. Accordingly, atomization is prescribed by injecting drops which have a characteristic size equal to the nozzle exit diameter. Example problems include the nearly homogeneous and inhomogeneous turbulent particle dispersion, and the non-evaporating, evaporating, and burning dense sprays. Comparison with experimental data will be discussed in detail.

Chen, C. P.↗

NASA NTRS1986

Velocity-resolved observations of water in Comet Halley

An infrared spectrum of comet Halley was recorded at the Kuiper Airborne Observatory with an instrumental velocity resolution of 1.1 km/sec. A total of 13 emission lines in the 2.65 micron spectral region were assigned to neutral gaseous H2O : 10 in the 001 to 000 band and 3 in the hot 011 to 010 band. The position and widths of these lines are functions of the gas velocity field in the coma. Analysis indicates that the neutral gas outflow is widely dispersed about the nucleus. This spectroscopic picture is consistent with spacecraft images that show multiple jets releasing material into most of the sunfacing hemisphere.

Larson, Harold P.↗

NASA NTRS1991

Computational simulation of the creep-rupture process in filamentary composite materials

A computational simulation of the internal damage accumulation which causes the creep-rupture phenomenon in filamentary composite materials is developed. The creep-rupture process involves complex interactions between several damage mechanisms. A statistically-based computational simulation using a time-differencing approach is employed to model these progressive interactions. The finite element method is used to calculate the internal stresses. The fibers are modeled as a series of bar elements which are connected transversely by matrix elements. Flaws are distributed randomly throughout the elements in the model. Load is applied, and the properties of the individual elements are updated at the end of each time step as a function of the stress history. The simulation is continued until failure occurs. Several cases, with different initial flaw dispersions, are run to establish a statistical distribution of the time-to-failure. The calculations are performed on a supercomputer. The simulation results compare favorably with the results of creep-rupture experiments conducted at the Lawrence Livermore National Laboratory.

Slattery, Kerry T.↗

NASA NTRS2010

Analytic Development of a Reference Profile for the First Entry in a Skip Atmospheric Entry

This note shows that a feasible reference drag profile for the first entry portion of a skip entry can be generated as a polynomial expression of the velocity. The coefficients of that polynomial are found through the resolution of a system composed of m + 1 equations, where m is the degree of the drag polynomial. It has been shown that a minimum of five equations (m = 4) are required to establish the range and the initial and final conditions on velocity and flight path angle. It has been shown that at least one constraint on the trajectory can be imposed through the addition of one extra equation in the system, which must be accompanied by the increase in the degree of the drag polynomial. In order to simplify the resolution of the system of equations, the drag was considered as being a probability density function of the velocity, with the velocity as a distribution function of the drag. Combining this notion with the introduction of empirically derived constants, it has been shown that the system of equations required to generate the drag profile can be successfully reduced to a system of linear algebraic equations. For completeness, the resulting drag profiles have been flown using the feedback linearization method of differential geometric control as a guidance law with the error dynamics of a second order homogeneous equation in the form of a damped oscillator. Satisfactory results were achieved when the gains in the error dynamics were changed at a certain point along the trajectory that is dependent on the velocity and the curvature of the drag as a function of the velocity. Future work should study the capacity to update the drag profile in flight when dispersions are introduced. Also, future studies should attempt to link the first entry, as presented and controlled in this note, with a more standard control concept for the second entry, such as the Apollo entry guidance, to try to assess the overall skip entry performance. A guidance law that includes an integral feedback term, as is the case in the actual Space Shuttle entry guidance and as is proposed in Ref 29, could be tried in future studies to assess whether its use results in an improvement of the tracking performance, and to evaluate the design needs when determining the control gains.

Garcia-Llama, Eduardo↗