Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Time-dependent polar distribution of outgassing from a spacecraft

A technique has been developed to obtain a characterization of the self-generated environment of a spacecraft and its variation with time, angular position, and distance. The density, pressure, outgassing flux, total weight loss, and other important parameters were obtained from data provided by two mass measuring crystal microbalances, mounted back to back, at distance of 1 m from the spacecraft equivalent surface. A major outgassing source existed at an angular position of 300 deg to 340 deg, near the rocket motor, while the weakest source was at the antennas. The strongest source appeared to be caused by a material diffusion process which produced a directional density at 1 m distance of about 1.6 x 10 to the 11th power molecules/cu cm after 1 hr in vacuum and decayed to 1.6 x 10 to the 9th power molecules/cu cm after 200 hr. The total average outgassing flux at the same distance and during the same time span changed from 1.2 x 10 to the minus 7th power to 1.4 x to the minus 10th power g/sq cm/s. These values are three times as large at the spacecraft surface. Total weight loss was 537 g after 10 hr and about 833 g after 200 hr. Self-contamination of the spacecraft was equivalent to that in orbit at about 300-km altitude.

Scialdone, J. J.↗

Study of structure defect interactions in aluminum by the acoustic method

Using echo pulse and resonance rod methods, internal friction in pure aluminum was studied as a function of frequency, hardening temperature, time (internal friction relaxation) and impurity content. These studies led to the conclusion that internal friction in these materials depends strongly on dislocation structure and on elastic interactions between structure defects. It was found experimentally that internal friction relaxation depends on the cooling rate and on the impurity content. Some parameters of the dislocation structure and of the diffusion process were determined. It is shown that the dislocated dependence of internal friction can be used as a method of nondestructive testing of the impurity content of high-purity materials.

Nicolaescu, I. I.↗

Elevated temperature deformation of thoria dispersed nickel-chromium

The deformation behavior of thoria nickel-chromium (TD-NiCr) was examined over the temperature range 593 C (1100 F) to 1260 C (2300 F) in tension and compression and at 1093 C (2000 F) in creep. Major emphasis was placed on: (1) the effects of the material and test related variables (grain size, temperature, stress and strain rate) on the deformation process; and (2) the evaluation of single crystal TD-NiCr material produced by a directional recrystallization process. Elevated temperature yield strength levels and creep activation enthalpies were found to increase with increasing grain size reaching maximum values for the single crystal TD-NiCr. Stress exponent of the steady state creep rate was also significantly higher for the single crystal TD-NiCr as compared to that determined for the polycrystalline materials. The elevated temperature deformation of TD-NiCr was analyzed in terms of two concurrent, parallel processes: diffusion controlled grain boundary sliding, and dislocation motion.

Kane, R. D.↗

Water vapor diffusion membrane development

The phase separator component used as a membrane in the vapor diffusion process (VRD) for the recovery of potable water from urine on manned space missions of extended duration was investigated, with particular emphasis on cation-selective membranes because of their noted mechanical strength, superior resistance to acids, oxidants, and germicides, and their potential resistance to organic foulants. Two of the membranes were tested for 700 hours continuously, and were selected on the basis of criteria deemed important to an effective water reclamation system onboard spacecraft. The samples of urine were successfully processed by removing 93 percent of their water content in 70 hours using the selected membranes. Pretreatment with an acid-oxidant formulation improved product quality. Cation exchange membranes were shown to possess superior mechanical strength and chemical resistance, as compared to cellulosic membranes.

Tan, M. K.↗

U.S. National Congress of Applied Mechanics, 7th, University of Colorado, Boulder, Colo., June 3-7, 1974, Proceedings

A series of experimental, theoretical, and review papers dealing with various aspects of applied mechanics, including structural analysis, mathematical methods, and fluid dynamics. Some of the topics covered are: the direct formulation of two-dimensional mechanics problems, the mechanical aspects of athletics, Laplace's tidal equations, cochlear mechanics, dynamic constitutive equations, optical techniques for the determination of displacement and strain fields, chemical and biochemical problems involving nonlinear diffusion processes, thermal stresses, the rotating rod viscometer, finite-element methods in plasticity, ships of minimum resistance, and wide-band random vibration of structures. Individual items are announced in this issue.

Source record↗

Molecular fluxes from a spacecraft measured with quartz microbalances

A technique has been developed to obtain a characterization of the self-generated environment of a spacecraft and its variation with time, angular position, and distance. The density, pressure, outgassing flux, total weight loss, and other important parameters were obtained from data provided by two mass measuring crystal microbalances, mounted back to back, at a distance of 1 m from the spacecraft equivalent surface. The strongest source appeared to be caused by a material diffusion process which produced a directional density at 1 m distance of about 160 billion molecules per cu cm after 1 h in vacuum and decayed to 1.6 billion molecules per cu cm after 200 h. Self-contamination of the spacecraft was equivalent to that which occurs in a 300-km altitude orbit.

Scialdone, J. J.↗

Recirculation of energetic particles in Jupiter's magnetosphere

A significant new finding from analysis of Pioneer 11 observations in the magnetosphere of Jupiter is that there is net streaming of both electrons E above 40 keV and E above 560 keV and protons in the range from .61 to 3.41 MeV away from the planet along high-latitude field lines. This result is compatible with the recent suggestion of Nishida that energetic particles undergo trans-L shell diffusion at low altitudes without significant change of energy. This provides a plausible explanation for the remarkable pitch angle distributions near the equator in the range of L values from 12 to 25; the presence of particles of about 1 MeV energy at the outer edge of the magnetosphere; and hence, via conventional inward diffusion processes, the presence of those having magnetic moments of several hundred MeV per gauss in the inner magnetosphere. The recirculation of energetic particles emerges as an important dynamical feature of the Jovian magnetosphere.-

Sentman, D. D.↗

Observations of large transient magnetospheric electric fields

Transient electric field events were observed with the long, double probe instrumentation carried by the IMP-6 satellite. Nine, clearly defined, exceptionally large amplitude events are presented here. The events are observed in the midnight sector at geocentric distances 3.5 to .5.5 R sub e at middle latitudes within a magnetic L-shell range of 4.8 to 7.5. They usually have a total duration of one to several minutes, with peak power spectra amplitudes occurring at a frequency of about 0.3 Hz. The events occur under magnetically disturbed conditions, and in most cases they can be associated with negative dH/dt excursions at magnetic observatories located near the foot of the magnetic field line intersecting IMP-6. The magnetospheric motions calculated for these electric fields indicated a quasi-stochastical diffusive process rather than the general inward magnetospheric collapsing motion expected during the expansive phases of auroral substorm activity.

Aggson, T. L.↗

Diffusion in mixed solvents. III - The heat of mixing parameter and the Soret coefficient

New evidence is presented that for aqueous glycerol solutions, the Soret coefficient of glycerol, sigma sub 1 = D sub 1 T/D sub 1 (where D sub 1 T and D sub 1 are the thermal and self-diffusion coefficients, respectively, of glycerol in aqueous solutions), is an integral part of the heat of mixing parameter. Expressions are presented indicating the importance of the Soret coefficients to correlations for diffusion processes in glycerol water solvents.

Carapellucci, P. A.↗

An approximate method for design and analysis of an ALOHA system

An approximate method for the design and performance prediction of a multiaccess communication system which employs the ALOHA packet-switching technique is developed, based on the use of a diffusion process approximation of an ALOHA-like system (with or without time-slotting). A simple closed-form solution for the variable Q(t), a variant of the number of backlog messages at time t, is given in terms of a few system and user parameters. Final results are expressed in terms of ordinary performance measures such as throughput and average delay. Several numerical examples are given to demonstrate the usefulness of the approximation technique developed.

Kobayashi, H.↗

Preignition reactions of AP-HTPB propellants studied by IR spectrometry

IR absorption spectrometry was used to follow the disappearance of NH and CH bonds during the pyrolysis of a polymer film containing 30 weight percent ammonium perchlorate (AP). The remaining 70 weight percent consisted of a mixture of 92.5 weight percent hydroxyl-terminated polybutadiene (HTPB) and 7.5 weight percent isophrone diisocyanate (IPDI). The results indicate that polymer decomposition is induced by products of AP decomposition, and that about 2.5 CH bonds disappear for each NH bond that disappears. The diffusion process occurring in the later stages of the reaction is analyzed in an attempt to account for the unexpectedly low activation energy.

Law, R. J.↗

Al-26 in stony meteorites with gas losses

The Al-26 content of a group of stony meteorites with low levels of He-3 (implying outgassing caused by near approach to the sun) was analyzed in a test of the possible role of cosmic radiation in determining the radionuclide concentration of meteorites. The Al-26 contents of the meteorites with He-3 losses were found to be indistinguishable from the Al-26 contents of L- and H-chondrites. It is concluded that if the He-3 outgassing occurred near the sun, the flux of particles producing Al-26 must have been nearly normal, or the diffusion process must have taken place very rapidly.

Herzog, G. F.↗

Observations of large transient magnetospheric electric fields

Transient electric field events were studied by means of the long double-probe instrumentation carried by the Imp 6 satellite, and nine clearly defined exceptionally large amplitude events are described. The events were observed in the midnight sector at geocentric distances of 3.5 to 5.5 earth radii at middle latitudes within a magnetic L shell range of 4.8 to 7.5; the duration is from one to several minutes with peak power spectra amplitudes occurring at a frequency of about 0.3 Hz. The events occur under magnetically disturbed conditions and are often associated with negative dH/dt excursions. The magnetospheric motions calculated for these electric fields indicate a quasi-stochastical diffusive process rather than the general inward magnetospheric collapsing motion expected during the expansive phases of auroral substorm activity. It is likely that the transient electric fields are responsible for the impulsive acceleration and injection of plasma to populate the outer radiation belt.

Aggson, T. L.↗

Single-, two-, and three-phase binary-alloy systems

Series of three computer programs solves one-dimensional transient diffusion problems in single-and multiphase binary-alloy systems. Accurate understanding of diffusion process in binary-alloy system is important for development of metal matrix composites, some protective coatings, and thin-film technology.

Tenney, D. R.↗

Planetary ionospheres

An analogy is drawn between the Eath's ionosphere and the existence of ionospheres around other planets or natural satellites. An ionosphere is defined as a series of layers (D, E, E1, F2) and their characteristics are discussed. Emphasis is on the role of solar wind impacting with the potential ionosphere and the subsequent chemical and diffusion processes that can be observed. Data from the MARINER and PIONEER space programs are cited concerning measured electron density and ionospheric refractivity of extraterrestrial ionospheres, then an attempt is made to model these atmospheres based on Earth ionosphere theory.

Bauer, S. J.↗

A spectroscopic study of intermediates in the condensation of refractory smokes: Matrix isolation experiments SiO

The infrared and Raman spectra of N2 matrix isolated silicon oxides are investigated. The vibrational frequencies of SiO, Si2O2, and Si3O3 were identified and assigned on the basis of normal coordinate analyses. Heating the solid to 50 K (evaporating the matrix) leaves a residue whose infrared spectrum is identical to that of a smoke condensed at ambient temperatures. Further heating of the sample to 500 K leads to significant changes in the band shapes. Investigations of the infrared spectra at several stages of the diffusion process result in the proposal of a mechanism for the transition from molecular properties to those of the residue (bulk) material, which is characterized as Si2O3.

Khanna, R. K.↗

Ultraviolet spectrum synthesis of the helium white dwarf Ross 640

The UV spectrum of the He-rich white dwarf Ross 640 was used to derive Mg, Si, and Fe abundances by a spectrum synthesis technique. The values obtained were: Mg/He = 6.8 x 10 to the -8th; Si/He = 3.2 x 10 to the -8th; Ca/He = 7.6 x 10 to the -10th; and Fe/He = 2.0 x 10 to the -9th. The abundances indicate the operation of diffusion processes within a helium-rich atmosphere, provided some mechanism exists to deposit metals in the observable layers.

Cottrell, P. L.↗

A spectroscopic study of intermediates in the condensation of refractory smokes - Matrix isolation experiments of SiO

The infrared and Raman spectra of N2 matrix-isolated silicon oxides were investigated. The vibrational frequencies of SiO, Si2O2, and Si3O3 were identified and assigned on the basis of normal coordinate analyses. Heating the solid to approximately 50 K (evaporating the matrix) leaves a residue whose infrared spectrum is identical to that of a smoke condensed at ambient temperatures. Further heating of the sample to approximately 500 K leads to significant changes in the band shapes. Investigations of the infrared spectra at several stages of the diffusion process enable a mechanism to be proposed for the transition from molecular properties to those of the residue (bulk) material, which has been characterized as Si2O3.

Khanna, R. K.↗