Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

Transcriptomics-based Machine Learning Analysis Predicts Space-Exposed Murine Livers

Limited sample sizes, high data dimensionality, and sensitivity to technical and biological variability of next generation sequencing (NGS), typically limits machine learning (ML) approaches in spaceflight studies that include radiation effects. However, pooling smaller studies while addressing intra- and inter-study variabilities allows for ML predictive modeling. Here, integration methods were applied to whole transcriptome shotgun sequencing (RNA-seq) data from six mouse liver GeneLab datasets (GLDS) (n ranging from 6 to 39 samples) from with a total of 81 spaceflight and ground-control samples to determine top features (i.e. genes) relevant to spaceflight including the effect of radiation exposure. RNASeq counts were normalized for each study, then merged and scaled across all datasets. Data dimensionality was reduced using a minimum redundancy maximum relevance (MRMR) methodology. Redundancy and relevance were computed using the Pearson correlation and F-statistic, respectively. The top 100 MRMR features were used to predict spaceflight vs. ground-control samples using Random Forest (RF), Support Vector Machine (SVM), and Linear Discriminant Analysis (LDA) classifiers with 5-fold cross validation (CV). Principal component analysis (PCA) on the complete feature set versus the MRMR features shows separation between spaceflight samples and ground controls (Figure 1A). The ML-based gene sets were compared against differential gene expression results obtained with DESeq2 from individual GLDS. Using all features or randomly sampled subsets at matching set sizes with MRMR, a maximum classifier accuracy of 69% was shown on the test set over 5 folds. For all classifiers, CV training using at least the top 30 MRMR genes show minimum 89% accuracy and 0.95 AUC value on the test set over 5 folds (Figure 1B). Baseline set analysis on differentially expressed genes (DEGs) identified using padj ≤ 0.05 show 295 DEGs that overlap at least two studies and 13 DEGs that overlap three studies (Figure 1C). Set analysis between the top 100 MRMR features and the DEGs showed 47 genes that overlap at least one study and 24 genes that overlap two studies. Over-representation analysis showed overlapping biological processes related to fatty acid and lipid metabolism which may indicate these processes in the response to spaceflight stressors. MRMR feature selection for the selected ML methods improve performance relative to a classifier built on all features or randomly sampled subsets. Permutation feature importance within the decorrelated MRMR features showed concordance in feature ranking between ML methods. A challenge of applying ML methods across heterogeneous NGS data is accounting for signal:noise. Here, signal validation across studies was shown by intersecting sets between top MRMR genes and DEGs from DESeq2 analysis. Non-intersecting sets introduce opportunity to explore genes relevant to differentiating space flight exposed groups and implementing ML methods across existing NGS datasets may overcome sample size limitations.

Machine Learning↗

Flight-determined stability and control characteristics of the M2-F3 lifting body vehicle

Flight data were obtained over a Mach number range from 0.4 to 1.55 and an angle-of-attack range from -2 deg to 16 deg. Lateral-directional and longitudinal derivatives, reaction control rocket effectiveness, and longitudinal trim information obtained from flight data and wind-tunnel predictions are compared. The effects of power, configuration change, and speed brake are discussed.

Sim, A. G.↗

Analytical evaluation of tilting proprotor wind tunnel test requirements

Specific test requirements related to the wind tunnel testing of the XV-15 advanced tilt rotor research aircraft were determined. The following analytical tools were developed: (1) digital simulation of the XV-15, incorporating a simplified tunnel support model, control system loop, measurement lags, gust disturbances, and sensor noise, (2) specialization of existing data analysis programs to the high order XV-15 dynamical model (transfer function program, a time series analysis program, an advanced maximum likelihood parameter identification program), (3) several auxiliary programs to provide estimates of damping from transfer functions as well as calculations of model decomposition of system response. The following results were discussed: (1) modelling of the aircraft, instrumentation, and controls, (2) results of the rotor/cantilever wing model and coupled wing, (3) examples of data prediction with system identification techniques, and (4) detailed conclusions and recommendations.

Hall, W. E., Jr.↗

Pump efficiency in solar-energy systems

Study investigates characteristics of typical off-the-shelf pumping systems that might be used in solar systems. Report includes discussion of difficulties in predicting pump efficiency from manufacturers' data. Sample calculations are given. Peak efficiencies, flow-rate control, and noise levels are investigated. Review or theory of pumps types and operating characteristics is presented.

Source record↗

In-flight structural dynamic characteristics of the XV-15 tilt rotor research aircraft

The XV-15 tilt rotor research aircraft has recently completed the contractor flight test program at the Bell Helicopter Textron Flight Research Center, Arlington, Texas. During these development and envelope expansion flights (60 flight hours, 140 flights), the aircraft has been tested up to a maximum true airspeed of 557 km/h (346 mph, 301 knts). Results of the structural characteristics obtained during this testing are presented. Included is a discussion concerning the rotor and airframe loads, natural frequency placements, airframe control system interaction, and wing-rotor-pylon aeroelastic stability. Measured data are compared with predicted values for many cases.

Bilger, J. M.↗

Development and validation of the V/STOL aerodynamics and stability and control manual

A V/STOL Aerodynamics and Stability and Control Manual was developed to provide prediction methods which are applicable to a wide range of V/STOL configurations in hover and transition flight, in and out of ground effect. Propulsion-induced effects have been combined with unpowered aerodynamics in a buildup of total forces and moments for the jet-lift concept, so that total aerodynamics can be used to predict aircraft stability, control, and flying qualities characteristics. Results of longitudinal aerodynamic predictions have been compared with test data, and indicate that the methods are fast, inexpensive, and within the desired accuracy for the objective preliminary design stage.

Henderson, C.↗

Statistical prediction of dynamic distortion of inlet flow using minimum dynamic measurement. An application to the Melick statistical method and inlet flow dynamic distortion prediction without RMS measurements

The Melick method of inlet flow dynamic distortion prediction by statistical means is outlined. A hypothetic vortex model is used as the basis for the mathematical formulations. The main variables are identified by matching the theoretical total pressure rms ratio with the measured total pressure rms ratio. Data comparisons, using the HiMAT inlet test data set, indicate satisfactory prediction of the dynamic peak distortion for cases with boundary layer control device vortex generators. A method for the dynamic probe selection was developed. Validity of the probe selection criteria is demonstrated by comparing the reduced-probe predictions with the 40-probe predictions. It is indicated that the the number of dynamic probes can be reduced to as few as two and still retain good accuracy.

Schweikhard, W. G.↗

Simulation investigation of the effects of helicopter hovering dynamics on pilot performance

A fixed base simulation has been performed to investigate the handling qualities requirements for the mid-term pitch response of a helicopter at hover and in low-speed flight. Pilot rating results from this simulation were compared with those from previous experiments to develop handling qualities limits on the frequency and damping of the oscillatory mode in the hovering cubic. Pilot performance data obtained during the experiment were used to confirm the pilot rating results. These data show the pilot performance to closely match that predicted by the theory of piloted control. A means of predicting pilot ratings from the open-loop aircraft dynamics is presented.

Aponso, Bimal L.↗

Effects of square-wave and simulated natural light-dark cycles on hamster circadian rhythms

Circadian rhythms of activity (Act) and body temperature (Tb) were recorded from male Syrian hamsters under square-wave (LDSq) and simulated natural (LDSN, with dawn and dusk transitions) light-dark cycles. Light intensity and data sampling were under the synchronized control of a laboratory computer. Changes in reactive and predictive onsets and offsets for the circadian rhythms of Act and Tb were examined in both lighting conditions. The reactive Act onset occurred 1.1 h earlier (P < 0.01) in LDSN than in LDSq and had a longer alpha-period (1.7 h; P < 0.05). The reactive Tb onset was 0.7 h earlier (P < 0.01) in LDSN. In LDSN, the predictive Act onset advanced by 0.3 h (P < 0.05), whereas the Tb predictive onset remained the same as in LDSq. The phase angle difference between Act and Tb predictive onsets decreased by 0.9 h (P < 0.05) in LDSN, but the offsets of both measures remained unchanged. In this study, animals exhibited different circadian entrainment characteristics under LDSq and LDSN, suggesting that gradual and abrupt transitions between light and dark may provide different temporal cues.

NASA Discipline Regulatory Physiology↗

Sensor Fusion in Telerobotic Task Controls

Model-based telerobotic task control and automation is typically limited to motion control of robot arms in free space, and contact events under predictable conditions. A display and control method- ology is described for combining different multidimensional sensor data to guide the performance of telerobotic contact or near-contact tasks successfully in manual or supervised automatic modes of control.

telerobotics robotic task controllers sensor fusio↗

MASCOT - MATLAB Stability and Control Toolbox

MASCOT software was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental non-linear equations of motion, MASCOT then calculates vehicle trim and static stability data for any desired flight condition. Common predefined flight conditions are included. The predefined flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind and sideslip, plus three takeoff rotation conditions. Results are displayed through a unique graphical interface developed to provide stability and control information to the conceptual design engineers using a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. This software allows the user to prescribe the vehicle s CG location, mass, and inertia tensor so that any loading configuration between empty weight and maximum take-off weight can be analyzed. The required geometric and aerodynamic data as well as mass and inertia properties may be entered directly, passed through data files, or come from external programs such as Vehicle Sketch Pad (VSP). The current version of MASCOT has been tested with VSP used to compute the required data, which is then passed directly into the program. In VSP, the vehicle geometry is created and manipulated. The aerodynamic coefficients, stability and control derivatives, are calculated using VorLax, which is now available directly within VSP. MASCOT has been written exclusively using the technical computing language MATLAB . This innovation is able to bridge the gap between low-fidelity conceptual design and higher-fidelity stability and control analysis. This new tool enables the conceptual design engineer to include detailed static stability and trim constraints in the conceptual design loop. The unique graphical interface developed for this tool presents the stability data in a format that is understandable by the conceptual designer, yet also provides the detailed quantitative results if desired.

Kenny, Sean↗

MATLAB Stability and Control Toolbox Trim and Static Stability Module

MATLAB Stability and Control Toolbox (MASCOT) utilizes geometric, aerodynamic, and inertial inputs to calculate air vehicle stability in a variety of critical flight conditions. The code is based on fundamental, non-linear equations of motion and is able to translate results into a qualitative, graphical scale useful to the non-expert. MASCOT was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental nonlinear equations of motion, MASCOT then calculates vehicle trim and static stability data for the desired flight condition(s). Available flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind, and sideslip, plus three take-off rotation conditions. Results are displayed through a unique graphical interface developed to provide the non-stability and control expert conceptual design engineer a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. If desired, the user can also examine the detailed, quantitative results.

Kenny, Sean P.↗

Static Measurements on HTS Coils of Fully Superconducting AC Electric Machines for Aircraft Electric Propulsion System

The NASA Glenn Research Center (GRC) has been developing the high efficiency and high-power density superconducting (SC) electric machines in full support of electrified aircraft propulsion (EAP) systems for a future electric aircraft. A SC coil test rig has been designed and built to perform static and AC measurements on BSCCO, (RE)BCO, and YBCO high temperature superconducting (HTS) wire and coils at liquid nitrogen (LN2) temperature. In this paper, DC measurements on five SC coil configurations of various geometry in zero external magnetic field are measured to develop good measurement technique and to determine the critical current (Ic) and the sharpness (n value) of the super-to-normal transition. Also, standard procedures for coil design, fabrication, coil mounting, micro-volt measurement, cryogenic testing, current control, and data acquisition technique were established. Experimentally measured critical currents are compared with theoretical predicted values based on an electric-field criterion (Ec). Data here are essential to quantify the SC electric machine operation limits where the SC begins to exhibit non-zero resistance. All test data will be utilized to assess the feasibility of using HTS coils for the fully superconducting AC electric machine development for an aircraft electric propulsion system.

superconducting motor↗

Application of the multigrid solution technique to hypersonic entry vehicles

A multigrid solution procedure has been incorporated in a version of the Langley Aerothermodynamic Upwind Relaxation Algorithm. The multigrid scheme is based on the Full Approximation Storage approach and uses Full Multigrid to obtain a well defined fine mesh starting solution. Predictions were obtained using standard transfer operators and a 'V-cycle' was used to control grid sequencing. Computed hypersonic flow solutions compared with experimental data for a 15 degree sphere cone, blended-wing body, and shuttle-like geometries are presented. It is shown that the algorithm accurately predicts heating rates, and when compared with the single grid algorithm computes solutions in one-third the computational time.

Greene, Francis A.↗

High School Citizen Scientists Use AI/ML to Predict Intra-Ocular Pressure From Gene Expression Data for Spaceflown Mice

Artificial Intelligence (AI) and Machine Learning (ML) have increasingly become pivotal in biological and biomedical research, largely due to the culture of open data sharing and its associated benefits. The methodologies inherent in AI/ML are particularly adept at identifying and forecasting biological phenotypes from the vast amounts of data generated by next-generation sequencing technologies. These techniques offer substantial promise for advancing research in space biosciences and for the development of automated systems for monitoring space health. Nevertheless, there are crucial aspects to consider when training, validating, and testing machine learning models in both biological research and clinical contexts. It is essential that Open Science principles, including data sharing and the availability of open-source code, are complemented by high-quality, publicly accessible training resources. These resources should focus on best practices and include modules based on real-world scientific cases and data to ensure that future AI/ML practitioners gain practical experience with genuine problems. Addressing this knowledge gap, we have designed, developed, and delivered both interactive and self-paced training programs for citizen scientists worldwide, enabling them to utilize AI/ML for space biology research. This initiative was made possible through generous funding from a Transformation to Open Science Training grant. The interactive training sessions, conducted this summer, utilized AI/ML techniques to analyze data from the Open Science Data Repository, specifically targeting the effects of spaceflight on ocular structure and function. The dataset OSD-583, from the Rodent Research 9 mission, provides experimental data detailing the ocular responses of mice subjected to a 35-day spaceflight, compared with ground control counterparts. Using OSD-583 as observational data, our summer training participants applied AI/ML methods to predict intraocular pressure from RNA-seq data and identify the genes most predictive of the observed responses. Further analysis through pathway enrichment and gene set enrichment revealed that these genes are involved in molecular and cellular processes contributing to retinal degeneration.

James Casaletto↗

Highly Efficient Design-of-Experiments Methods for Combining CFD Analysis and Experimental Data

It is the purpose of this study to examine the impact of "highly efficient" Design-of-Experiments (DOE) methods for combining sets of CFD generated analysis data with smaller sets of Experimental test data in order to accurately predict performance results where experimental test data were not obtained. The study examines the impact of micro-ramp flow control on the shock wave boundary layer (SWBL) interaction where a complete paired set of data exist from both CFD analysis and Experimental measurements By combining the complete set of CFD analysis data composed of fifteen (15) cases with a smaller subset of experimental test data containing four/five (4/5) cases, compound data sets (CFD/EXP) were generated which allows the prediction of the complete set of Experimental results No statistical difference were found to exist between the combined (CFD/EXP) generated data sets and the complete Experimental data set composed of fifteen (15) cases. The same optimal micro-ramp configuration was obtained using the (CFD/EXP) generated data as obtained with the complete set of Experimental data, and the DOE response surfaces generated by the two data sets were also not statistically different.

Anderson, Bernhard H.↗

Ammonia Vent of the External Active Thermal Control System (EATCS) Radiator #3 Flow Path #2 on the International Space Station (ISS)

The External Active Thermal Control System (EATCS) provides cooling for all pressurized modules and the main Power Distribution Electronics (PDE) on the International Space Station (ISS). There are 2 EATCS loops (Loop A and Loop B) which includes 3 deployable radiators. Each deployable radiator contains 2 flow paths to provide heat rejection.Telemetry monitoring identified a coolant (liquid ammonia) leak in EATCS Loop B. Robotic External Leak Locator (RELL) scans found higher concentrations of vaporous ammonia near the EATCS Loop B Radiator #3 Flow Path #2. On May 3, 2017, the EATCS Loop B Radiator #3 Flow Path #2 was isolated and vented. As of the data to date, the ammonia leak has ceased. The purpose of this presentation is to discuss the analysis for venting the EATCS Loop B Radiator #3 Flow Path #2. Venting analysis is performed to determine the worst case time to empty the flow path and maximum thrusts imposed on the ISS. Flight controllers and engineers in the Mission Control Center (MCC) uses this data to develop operational procedures and perform the vent safely. It was predicted that the worst case time to empty the EATCS Loop B Radiator #3 Flow Path #2 was ~ 60 minutes. The predicted maximum thrusts were ~ 11 lbf (49 N) at the start of the vent and ~10 lbf (45 N) after the system reaches saturation.The vent was successfully performed and took ~ 20 minutes to empty the EATCS Loop B Radiator #3 Flow Path #2. Using telemetry from the day of the vent, analysis determined the time to empty the EATCS Loop B Radiator #3 Flow Path #2 would be ~13 minutes. The predictive analysis used worst case inputs and assumptions which bounded the actual results. Telemetry is not available to correlate actual thrust with the predicted maximum thrusts. However, by using Russian Thrusters for ISS attitude control, attitude control telemetry indicated the flight attitude was maintained.

Cowan, Darnell T.↗