SEARCH · Engineering Papers

Results for “correlation energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS1994

The effects of scattering on solar oscillations

Acoustic modes are scattered by turbulent velocity fluctuations in the solar convection zone. The strongest scattering occurs near the top of the acoustic cavity where the mode changes character from propagating to evanescent. This layer is located at depth z(sub 1) approximately g/omega(exp 2) below the photosphere. The scattering optical depth tau(sub s) is of order M(sub 1)(exp 2), where M(sub 1) is the Mach number of the energy-bearing eddies at z(sub 1). The corresponding contribution to the line width is gamma(exp s) is approximately (omega) M(sub 1)(exp 2)/(pi)(n+1), where n is the mode's radial order. At the top of the acoustic cavity the correlation time of energy-bearing eddies is much longer than omega(exp -1). Also, the pressure scale height H and the eddy correlation length Lambda are comparable to omega/c, where c is the sound speed. Thus scattering couples modes of similar omega and all l and has little effect on the sum of their energies. Observations show that mode energies decline with decreasing n (increasing l) at fixed omega. Consequently, scattering damps p-modes and excites f-modes.

Goldreich, Peter↗

NASA NTRS1984

Theoretical study of electron correlation effects in transition metal dimers

Introduction of partially localized orbitals is shown to reduce the number of terms needed to describe the bonding in transition metal clusters. Using this formalism, it is possible to compute the various intra- and inter-atomic electron correlation contributions to the bond energy. Calculations demonstrate the relative importance of several kinds of electron correlation terms involving the 3p, 3d, and 4s electrons. Improved interaction potentials are obtained for the dimers V(2) and Cr(2) when additional correlation is added to the CAS SCF results of Walch, Bauschlicher, Roos, and Nelin (1983).

Das, G. P.↗

NASA NTRSDate not supplied

Energy landscape in Ni-Co-Cr and related alloys

Among multi-principal element alloys, the NiCoCr middle-entropy alloy has an outstanding combination of strength and ductility at both low and elevated temperatures. Equiatomic NiCoCr is a single-phase alloy with the face centered cubic (fcc) crystal structure. A low stacking fault energy in the fcc matrix is a cause of a relatively low creep in this alloy. The hexagonal close-packed (hcp) structure differs from the fcc by a stacking of atomic layers. The energy difference between the hcp and fcc structures is known to correlate with the stacking fault energy in the fcc phase. We compute formation and relative structural energies versus composition in the Ni-Co-Cr ternary and related quaternary systems, discuss possibilities of compositional adjustments, and compare theoretical predictions with experiment. We acknowledge funding by NASA’s Aeronautics Research Mission Directorate (ARMD) via Transformational Tools and Technologies (TTT) Project.

NiCoCr↗

NASA NTRSDate not supplied

Energy landscape in Ni-Co-Cr and related alloys

Multiscale↗

NASA NTRS1992

On the local nature of the energy cascade

The local nature of the energy cascade in space and time is studied using direct numerical simulation of decaying and forced isotropic turbulence. To examine the concept that large scales evolve into smaller ones, we compute the Lagrangian correlation coefficient between local kinetic energy at different scales. This correlation is found to peak at a Lagrangian time-delay that increases with scale separation. The results show that, on average, the flow of energy to smaller scales is predominantly local in physical space and that the view of eddies decaying into smaller ones while transferring their kinetic energy appears to be, on average, quite realistic. To examine the spectral characteristics of the cascade under unsteady conditions, a pulse of large-scale energy is added to the large-eddy simulation of forced isotropic turbulence. As time progresses, the evolution of this pulse through bands of increasing wavenumbers is studied.

Meneveau, C.↗

NASA NTRS2015

Magnetogram Forecast: An All-Clear Space Weather Forecasting System

Solar flares and coronal mass ejections (CMEs) are the drivers of severe space weather. Forecasting the probability of their occurrence is critical in improving space weather forecasts. The National Oceanic and Atmospheric Administration (NOAA) currently uses the McIntosh active region category system, in which each active region on the disk is assigned to one of 60 categories, and uses the historical flare rates of that category to make an initial forecast that can then be adjusted by the NOAA forecaster. Flares and CMEs are caused by the sudden release of energy from the coronal magnetic field by magnetic reconnection. It is believed that the rate of flare and CME occurrence in an active region is correlated with the free energy of an active region. While the free energy cannot be measured directly with present observations, proxies of the free energy can instead be used to characterize the relative free energy of an active region. The Magnetogram Forecast (MAG4) (output is available at the Community Coordinated Modeling Center) was conceived and designed to be a databased, all-clear forecasting system to support the operational goals of NASA's Space Radiation Analysis Group. The MAG4 system automatically downloads nearreal- time line-of-sight Helioseismic and Magnetic Imager (HMI) magnetograms on the Solar Dynamics Observatory (SDO) satellite, identifies active regions on the solar disk, measures a free-energy proxy, and then applies forecasting curves to convert the free-energy proxy into predicted event rates for X-class flares, M- and X-class flares, CMEs, fast CMEs, and solar energetic particle events (SPEs). The forecast curves themselves are derived from a sample of 40,000 magnetograms from 1,300 active region samples, observed by the Solar and Heliospheric Observatory Michelson Doppler Imager. Figure 1 is an example of MAG4 visual output

Barghouty, Nasser↗

NASA NTRS1979

Quantitative energy extraction measurements in a photoionization-stabilized self-sustained XeF laser

Detailed time-correlated gain, fluorescence, and laser energy measurements were used to obtain quantitative data on energy extraction efficiencies for a photoionization-stabilized self-sustained XeF laser. A current pulse of 25 ns full width at half-maximum produced an 80-cu-cm XeF plasma in NF3:Xe:He gas mixtures with a maximum output energy of 80 mJ. The results show that the maximum small-signal gain and the maximum specific output energy is proportional to the NF3 content of the gas mixture. This suggests that there is an optimum fractional utilization of the NF3 molecules in the discharge. Under high-gain conditions, 30-40% of the energy stored in XeF(asterisk) can be extracted in a gain-switched pulse. The output energy represents less than 1% of the input energy.

Lee, C. M.↗

NASA NTRS2007

SRG110 Stirling Generator Dynamic Simulator Vibration Test Results and Analysis Correlation

The U.S. Department of Energy (DOE), Lockheed Martin (LM), and NASA Glenn Research Center (GRC) have been developing the Stirling Radioisotope Generator (SRG110) for use as a power system for space science missions. The launch environment enveloping potential missions results in a random input spectrum that is significantly higher than historical radioisotope power system (RPS) launch levels and is a challenge for designers. Analysis presented in prior work predicted that tailoring the compliance at the generator-spacecraft interface reduced the dynamic response of the system thereby allowing higher launch load input levels and expanding the range of potential generator missions. To confirm analytical predictions, a dynamic simulator representing the generator structure, Stirling convertors and heat sources were designed and built for testing with and without a compliant interface. Finite element analysis was performed to guide the generator simulator and compliant interface design so that test modes and frequencies were representative of the SRG110 generator. This paper presents the dynamic simulator design, the test setup and methodology, test article modes and frequencies and dynamic responses, and post-test analysis results. With the compliant interface, component responses to an input environment exceeding the SRG110 qualification level spectrum were all within design allowables. Post-test analysis included finite element model tuning to match test frequencies and random response analysis using the test input spectrum. Analytical results were in good overall agreement with the test results and confirmed previous predictions that the SRG110 power system may be considered for a broad range of potential missions, including those with demanding launch environments.

Lewandowski, Edward J.↗

NASA NTRS2006

SRG110 Stirling Generator Dynamic Simulator Vibration Test Results and Analysis Correlation

The U.S. Department of Energy (DOE), Lockheed Martin (LM), and NASA Glenn Research Center (GRC) have been developing the Stirling Radioisotope Generator (SRG110) for use as a power system for space science missions. The launch environment enveloping potential missions results in a random input spectrum that is significantly higher than historical RPS launch levels and is a challenge for designers. Analysis presented in prior work predicted that tailoring the compliance at the generator-spacecraft interface reduced the dynamic response of the system thereby allowing higher launch load input levels and expanding the range of potential generator missions. To confirm analytical predictions, a dynamic simulator representing the generator structure, Stirling convertors and heat sources was designed and built for testing with and without a compliant interface. Finite element analysis was performed to guide the generator simulator and compliant interface design so that test modes and frequencies were representative of the SRG110 generator. This paper presents the dynamic simulator design, the test setup and methodology, test article modes and frequencies and dynamic responses, and post-test analysis results. With the compliant interface, component responses to an input environment exceeding the SRG110 qualification level spectrum were all within design allowables. Post-test analysis included finite element model tuning to match test frequencies and random response analysis using the test input spectrum. Analytical results were in good overall agreement with the test results and confirmed previous predictions that the SRG110 power system may be considered for a broad range of potential missions, including those with demanding launch environments.

Suarez, Vicente J.↗

NASA NTRS2021

Long-term Pulse Period Evolution of the Ultra-luminous X-ray Pulsar NGC 7793 P13

Ultra-luminous X-ray pulsars (ULXPs) provide a unique opportunity to study persistent super-Eddington accretion. Here we present the results of a long-term monitoring campaign of ULXP NGC 7793 P13, focusing on the pulse period evolution and the determination of the orbital ephemeris. Over our four year monitoring campaign with Swift, XMM-Newton, and NuSTAR, we measure a continuous spin-up with an average value of ̇P≈−3.8×10−11s s−1. We find that the strength of the spin-up is independent of the observed X-ray flux, indicating that despite a drop in observed flux in 2019, accretion onto the source has continued at largely similar rates. The source entered an apparent off-state in early 2020, which might have resulted in a change of the accretion geometry as no pulsations were found in observations in July/August 2020.We use the long-term monitoring to update the orbital ephemeris, as well as the periodicities seen in both the observed optical/UV and X-ray fluxes. We find that the optical/UV period is very stable over the years, with PUV=63.75+0.17−0.12d. The best-fit orbital period determined from our X-ray timing results is 64.86±0.19 d, almost a day longer than previously implied, and the X-ray flux period is65.21±0.15 d, slightly shorter than measured previously. The physical origin of these different flux periods is currently unknown. We study the hardness ratio of the XMM-Newton and NuSTAR data between 2013–2020 to search for indications of spectral changes. We find that the hardness ratios at high energies are very stable and not directly correlated with the observed flux. At lower energies we observe a small hardening with increased flux, which might indicate increased obscuration through outflows at higher luminosities. Comparing the changes in flux with the observed pulsed fraction, we find that the pulsed fraction is significantly higher at low fluxes. This seems to imply that the accretion geometry already changed before the source entered the deep off-state. We discuss possible scenarios to explain this behavior, which is likely driven by a precessing accretion disk.

Neutron stars↗

NASA NTRS2009

Correlative Analysis of GRBs Detected by Swift and Suzaku- WAM

It is now well known that a complete understanding of the energetics of the prompt phase of gamma-ray bursts (GRBs) requires full knowledge of the spectrum, extending at least as high as the peak energy (Epeak) of the vF(v) spectrum. Since most gamma-ray bursts (GRBs) have Epeak above the energy range (15-150 keV) of the Burst Alert Telescope (BAT) on Swift, a full understanding of the prompt emission from Swift GRBs requires spectral fits over as broad an energy range as possible. This can be completed for bursts which are simultaneously detected by Swift BAT and the Suzaku Wide-band All-Sky Monitor (WAM), which covers the energy range from 50-5000 keV. Between the launch of Suzaku in July 2005 and the end of 2008, there were 44 gamma-ray bursts (GRBs) which triggered both Swift and WAM and an additional 41 bursts which triggered Swift and were detected by WAM, but did not trigger. A joint BAT-WAM team has cross-calibrated the two instruments using GRBs, and we are now able to perform joint fits on these bursts to determine spectral parameters including Epeak. The results of broad spectral fits allows us to understand the distribution of Epeak for Swift bursts and to calibrate Epeak estimators when Epeak is within the BAT energy range. For those bursts with spectroscopic redshifts, we can calculate the isotropic energy and study various correlations between Epeak and other global burst parameters. Here we present the results of joint Swift/BAT-Suzaku/WAM spectral fits for 77 of the bursts jointly detected by the two instruments. We show that the distribution of spectral fit parameters is consistent with distributions from earlier missions and confirm that Swift bursts are consistent with earlier reported relationships between Epeak and isotropic energy. We show through time-resolved spectroscopy that individual burst pulses are also consistent with this relationship.

Krimm, H.A.↗

NASA NTRS1977

Scaling a discrete structural model to match measured modal frequencies

The structure modification problem, where the computer model of a structure is to be upgraded on the basis of experimental measurements of normal mode frequencies, is approached by the modal energy concept. The modes for correlation with test data are selected on the basis of relative strain energy participation. The resulting procedure can be viewed as an extension of White's (1972) method. Its advantage lies in that both the number and choice of structural parameters to be varied in the modification are arbitrary.

Taylor, J. E.↗

NASA NTRS1986

Prediction of heat release effects on a mixing layer

A fully second-order closure model for turbulent reacting flows is suggested based on Favre statistics. For diffusion flames the local thermodynamic state is related to single conserved scalar. The properties of pressure fluctuations are analyzed for turbulent flows with fluctuating density. Closure models for pressure correlations are discussed and modeled transport equations for Reynolds stresses, turbulent kinetic energy dissipation, density-velocity correlations, scalar moments and dissipation are presented and solved, together with the mean equations for momentum and mixture fraction. Solutions of these equations are compared with the experimental data for high heat release free mixing layers of fluorine and hydrogen in a nitrogen diluent.

Farshchi, M.↗

NASA NTRS1986

Prediction of heat release effects on a mixing layer

A fully second-order closure model for turbulent reacting flows is suggested based on Favre statistics. For diffusion flames the local thermodynamic state is related to a single conserved scalar. The properties of pressure fluctuations are analyzed for turbulent flows with fluctuating density. Closure models for pressure correlations are discussed and modelled transport equations for Reynolds stresses, turbulent kinetic energy dissipation, density-velocity correlations, scalar moments and dissipation are presented and solved, together with the mean equations for momentum and mixture fraction. Solutions of these equations are compared with the experimental data for high heat release free mixing layers of fluorine and hydrogen in a nitrogen diluent.

Farshchi, M.↗

NASA NTRS1983

A note on compressibility and energy cascade in turbulent molecular clouds

Observed velocity-size correlations are reexamined in the light of an improved theory of turbulent energy cascade that is developed. It is shown that observed velocity-size correlations cannot be compared with the Kolmogorov law, which is based on incompressible turbulent flow. The fact that the log v-log(l/rho) scaling law (v the turbulent velocity, l the associated region size, and rho the fluid density) predicted for compressible energy cascade is always steeper than that observed in molecular clouds indicates the injection rather than the dissipation of mechanical energy at smaller scales of motion. It is also shown that the concept of strict energy cascade may not be generally applicable in the interstellar medium. The agreement between theory and observation turns out to be best for small cool clouds and cloud cores, suggesting that, for these regions at least, the dominant process in establishing the observed v-l-rho correlation is a turbulent energy cascade.

Fleck, R. C., Jr.↗

NASA NTRS1972

The multifarious temporal variations of low energy, relativistic cosmic ray electrons

A detailed examination is made of the intensity variations of 3 - 12 MeV interplanetary electrons. The data used are from the cosmic ray experiment flown on the IMP solar minimum through to the onset of the present solar maximum (i.e., from December 1963 through August 1969). A morphology for the intensity changes is tentatively proposed which includes solar flare-associated events, solar co-rotating increases, Forbush decreases, and quiet-time increases, as well as the long term eleven-year variation. It is contended that the electron component observed both during quiescent times and during quiet-time increases are galactic in origin. The quiet-time increases represent a completely new phenomenon that appears to be unique to the low energy electron population. During a quiet-time increase the electron intensity is enhanced by a factor of 3 to 5 over a period of days, and, in general, these periods anti-correlate with low-energy solar particle events. Qualitatively, their amplitude diminishes with increasing solar activity.

Mcdonald, F. B.↗

NASA NTRS1986

Measurements of n-p correlations in the reaction of relativistic neon with uranium

We report a preliminary measurement of coincident neutron-proton pairs emitted at 45 degrees in the interaction of 400, 530, and 650 MeV/A neon beams incident on uranium. Charged particles were identified by time of flight and momentum, as determined in a magnetic spectrometer. Neutral particles were detected using a thick plastic scintillator, and their time of flight was measured between an entrance scintillator, triggered by a charged particle, and the neutron detector. The scatter plots and contour plots of neutron momentum vs. proton momentum appear to show a slight correlation ridge above an uncorrelated background. The projections of this plane on the n-p momentum difference axis are essentially flat, showing a one standard deviation enhancement for each of the three beams energies. At each beam energy, the calculated momentum correlation function for the neutron-proton pairs is enhanced near zero neutron-proton momentum difference by approximately one standard deviation over the expected value for no correlation. This enhancement is expected to occur as a consequence of the attractive final state interaction between the neutron and proton (i.e., virtual or "singlet" deuterons). The implications of these measurements are discussed.

NASA Program Space Medicine↗

NASA NTRS1990

Stress versus temperature dependent activation energies in creep

The activation energy for creep at low stresses and elevated temperatures is lattice diffusion, where the rate controlling mechanism for deformation is dislocation climb. At higher stresses and intermediate temperatures, the rate controlling mechanism changes from that of dislocation climb to one of obstacle-controlled dislocation glide. Along with this change, there occurs a change in the activation energy. It is shown that a temperature-dependent Gibbs free energy does a good job of correlating steady-state creep data, while a stress-dependent Gibbs free energy does a less desirable job of correlating the same data. Applications are made to copper and a LiF-22 mol. percent CaF2 hypereutectic salt.

Freed, A. D.↗