Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corrections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Correction to Unveiling the Role of Al 2 O 3 in Preventing Surface Reconstruction During High-Voltage Cycling of Lithium-Ion Batteries

A correction to this article was necessary to replace the original Figure 2 with the actual data in the revised Figure 2 shown here. An error was made while preparing the graphs from the neutron diffraction analysis software, and panel a was accidentally inserted into the panel b–d spots, such that all four panels were replicates. Since the original analysis of the data collected was made correctly, the conclusions and key points related to this section and the whole article remain unchanged. The revised goodness factors are slightly different because the refinements were repeated with small changes to the refinement conditions. The corresponding author has obtained approval from all coauthors in the article prior the submission of the Correction. The authors apologize for any inconveniences caused.

25 ENERGY STORAGE↗
DOE OSTI2025

Correction to “From Structure to Function: Zn/Mn-Modified Maghemite as an Advanced Nanoplatform for Magnetic Hyperthermia and Radionuclide Therapy”

In the original paper, the acknowledgment contained an error in the attribution of the financial support. The correction is necessary to accurately reflect the source of funding that supported the contributions of the authors from the Institute of Physics Belgrade. The corrected Acknowledgments section is below. Here, this correction pertains solely to the funding acknowledgment and does not affect the scientific content, data, results, or conclusion of the work in any way.

Cancer therapy↗
DOE OSTI2021

Dynamic time-warping correction for shifts in ultrahigh resolving power ion mobility spectrometry and structures for lossless ion manipulations

Detection of arrival time shifts between ion mobility spectrometry (IMS) separations can limit achievable resolving power (Rp), particularly when multiple separations are summed or averaged, as commonly practiced. Such variations are more apparent in higher Rp measurements, and are particularly evident in long path length traveling wave structures for lossless ion manipulations (SLIM) IMS due to their typically much longer separation times. Here we explore the utility of a data processing approaches employing linear alignment (LA) and nonlinear dynamic time warping (DTW) of IMS separations to correct for variations between separations, such as due to pressure fluctuations. For multipass SLIM IMS separations, where narrow mobility range measurements have arrival times that can extend to several seconds, the LA approach effectively corrected for such variations, and significantly improvement Rp for summed separations. However, LA was much less effective for high Rp broad mobility range separations, such as obtained with multilevel SLIM IMS. Changes in IMS arrival times ions were observed to be correlated with small pressure changes, with approximately 0.6% relative arrival time shifts being common, sufficient to result in a loss of Rp for summed separations. Comparison of the approaches showed DTW alignment performed similarly to LA when used over a narrow mobility range, but was significantly better (providing narrower peaks and higher signal intensities) for wide mobility range data. We found the DTW approach increased Rp by as much as 115% for measurements in which 50 IMS separations over 2 seconds were summed, and leading to a large improvement in effective Rp. We conclude that DTW is superior to LA for ultrahigh resolution broad mobility range SLIM IMS separations, correcting for ion arrival time shifts regardless of the cause. Our tool is publicly available for use with universal ion mobility format (.UIMF) and text (.txt) files.

Data alignment, dynamic time warping, ion mobility↗
DOE OSTI2021

Elevating density functional theory to chemical accuracy for water simulations through a density-corrected many-body formalism

Abstract Density functional theory (DFT) has been extensively used to model the properties of water. Albeit maintaining a good balance between accuracy and efficiency, no density functional has so far achieved the degree of accuracy necessary to correctly predict the properties of water across the entire phase diagram. Here, we present density-corrected SCAN (DC-SCAN) calculations for water which, minimizing density-driven errors, elevate the accuracy of the SCAN functional to that of “gold standard” coupled-cluster theory. Building upon the accuracy of DC-SCAN within a many-body formalism, we introduce a data-driven many-body potential energy function, MB-SCAN(DC), that quantitatively reproduces coupled cluster reference values for interaction, binding, and individual many-body energies of water clusters. Importantly, molecular dynamics simulations carried out with MB-SCAN(DC) also reproduce the properties of liquid water, which thus demonstrates that MB-SCAN(DC) is effectively the first DFT-based model that correctly describes water from the gas to the liquid phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Author Correction: Proton irradiation-decelerated intergranular corrosion of Ni-Cr alloys in molten salt

In the original version of this article, numbers for the beam current densities were incorrectly given as 1.5, 2.0, and 2.5 mA cm -2 in various locations, instead of the correct values 0.3, 0.4, and 0.5 mA cm -2 . This was owing to a measurement error coming from the indirect correspondence between the Faraday cup and the beam profile monitor (BPM) on the accelerator as the proton beam traveling along the beamline resulted in mismatching between calculated values and real beam currents, which were obtained by ex-situ calibration. The following changes have been made in the correct version. The eighth sentence of the Results, and the figure legend of Fig. 2j state '0.3, 0.4, 0.5 mA cm -2 ' in place of '1.5, 2.0, 2.5 mA cm -2 '. The figure legend of Fig. 1j–l states '0.5, 0.4, 0.3 mA cm -2 ' in place of '2.5, 2.0, 1.5 mA cm -2 '. Figure 1e states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 ', Fig. 1h states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 ', and Fig. 1k states ‘0.3 mA cm -2 ' in place of ‘1.5 mA cm -2 '. Figure 2c states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 ', Fig. 2d states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 ', and Fig. 2e states '0.3 mA cm -2 ' in place of '1.5 mA cm -2 '. Figure 2j and k states ‘0.3 mA cm -2 ', '0.4 mA cm -2 ', '0.5 mA cm -2 ' in place of '1.5 mA cm -2 ', '2.0 mA cm -2 ', and '2.5 mA cm -2 ', respectively. The figure legend of Fig. 3b states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 '. The figure legend of Supplementary Fig. 1 states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 '. This has been corrected in the PDF and HTML versions of the Article.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Author Correction: Genome-guided isolation of the hyperthermophilic aerobe Fervidibacter sacchari reveals conserved polysaccharide metabolism in the Armatimonadota

Correction to: Nature Communicationshttps://doi.org/10.1038/s41467-024-53784-3, published online 4 November 2024 In the version of this article initially published, Table 1 did not include the properties of the taxa being proposed or refer directly to another location in the main manuscript describing the properties. As such, the original manuscript did not comply with Rule 27 (2)(c) of the ICNP. Also, Table 1 listed the order Fervidibacterales as the nomenclatural type for the class Fervidibacteria, which violates latest emended version of Rule 15 stating that the nomenclatural type for a class must be a genus. Below we provide a modification of Table 1 containing protologues with these errors corrected. We have also changed the order of the taxa in the table to meet the most common ordering. (Table presented.) Taxon names proposed under the ICNP Proposed taxon Etymology Description Genus Fervidibacter Fer.vi.di.bac’ter. L. masc. adj. fervidus, hot, steaming; N.L. masc. n. bacter, a rod; N.L. masc. n. Fervidibacter, a hot rod Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic, with high-affinity and/or low-affinity terminal oxidases present in the genomes. The oxidative pentose phosphate pathway and the tricarboxylic acid cycle are complete in genomes belonging to the genus. Gram-stain-negative and diderm cell envelope structure. Ovoid- to rod-shaped morphology. Spores are not formed. The genus is a distinct phylogenetic lineage in the family Fervidibacteraceae, the order Fervidibacterales, and the class Fervidibacteria in the phylum Armatimonadota. The type species is Fervidibacter sacchariT. Species Fervidibacter sacchari sac’cha.ri. N.L. gen. n. sacchari, of sugar Hyperthermophilic, microaerophilic, facultatively anaerobic, and grows chemoheterotrophically on monosaccharides and polysaccharides. Cells are ovoid- to rod-shaped, Gram-stain negative, and are 0.9–1.3 µm in width and 1.6–3.6 µm in length. Grows between 65 and 87.5 °C and an optimum temperature of 80 °C, and a pH range of 6.5–8.6 with an optimum pH of 7.5. Grows at an optimum O2 concentration of 5–10%. Grows on D-arabinose, D-galactose, D-glucose, D-rhamnose, D-ribose, D-xylose, chondroitin sulfate, colloidal chitin, galactan, gellan gum, guar gum, karaya gum, locust bean gum, xantham gum, xyloglucan, β-glucan, glycogen, starch, AFEX-pretreated corn stover, miscanthus, sugarcane bagasse, acetate and casamino acids. Grows weakly on xyloglucan under fermentation conditions. The major fatty acids (>10%) are C16:0, C18:0 and/or cyclo-C17:0, and iso-C16:0. The major respiratory quinones (>10%) are MK-8 and MK-9. The isolate and genomes of the species have been recovered from geothermal springs in the Great Basin, Nevada, USA. GC content of genomes range between 51–52%. Subunits for both the high-affinity and low-affinity terminal oxidases are encoded in the genomes. Genomes also encode a Group 3d [NiFe] hydrogenase, which produces hydrogen as an electron sink for NAD+ regeneration. The type strain PD1T (= JCM 39283T = DSM 113467T) was isolated from Great Boiling Spring in Nevada, USA. Family Fervidibacteraceae Fer.vi.di.bac.te.ra’ce.ae. N.L. masc. n. Fervidibacter type genus of the family; L. suff. -aceae ending to denote a family; N.L. fem. pl. n. Fervidibacteraceae the family of the genus Fervidibacter Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic, with high-affinity and/or low-affinity terminal oxidases present in the genomes. The oxidative pentose phosphate pathway and the tricarboxylic acid cycle are complete in genomes belonging to the family. The family is a distinct phylogenetic lineage in the order Fervidibacterales and the class Fervidibacteria in the phylum Armatimonadota. The type genus is Fervidibacter. Order Fervidibacterales Fer.vi.di.bac.te.ra’les. N.L. masc. n. Fervidibacter type genus of the order; L. suff. -ales ending to denote an order; N.L. fem. pl. n. Fervidibacterales the order of the genus Fervidibacter Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic or strictly anaerobic. Phylogenomic placement of this lineage within the Fervidibacteria and relative evolutionary divergence supports delineation of this lineage as an order within the class Fervidibacteria and phylum Armatimonadota. The type genus is Fervidibacter. Class Fervidibacteria Fer.vi.di.bac.te’ri.a. N.L. masc. n. Fervidibacter type genus of the type order of the class; L. suff. -ia ending to denote a class; N.L. neut. pl. n. Fervidibacteria the class of the order Fervidibacterales Thermophilic or hyperthermophilic inhabitants of freshwater thermal environments. All members are likely polysaccharide-degrading chemoheterotrophs with numerous carbohydrate-active enzymes encoded in their genomes. Aerobic or strictly anaerobic. Phylogenomic placement of this lineage within the Armatimonadota and relative evolutionary divergence supports delineation of this lineage as a class within the Armatimonadota. The type genus is Fervidibacter. The error has not been corrected in the PDF or HTML versions of the Article.

Nou, Nancy O↗
DOE OSTI2025

BEACON—automated aberration correction for scanning transmission electron microscopy using Bayesian optimization

Aberration correction is an important aspect of modern high-resolution scanning transmission electron microscopy. Most methods of aligning aberration correctors require specialized sample regions and are unsuitable for fine-tuning aberrations without interrupting on-going experiments. Here, we present an automated method of correcting first- and second-order aberrations called BEACON, which uses Bayesian optimization of the normalized image variance to efficiently determine the optimal corrector settings. We demonstrate its use on gold nanoparticles and a hafnium dioxide thin film showing its versatility in nano- and atomic-scale experiments. BEACON can correct all first- and second-order aberrations simultaneously to achieve an initial alignment and first- and second-order aberrations independently for fine alignment. Ptychographic reconstructions are used to demonstrate an improvement in probe shape and a reduction in the target aberration.

techniques and instrumentation↗
DOE OSTI2023

Real-time quantum error correction beyond break-even

The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy caused by the errors faster than the rate at which these errors corrupt the stored quantum information. Previous experimental attempts to engineer such a process faced an excessive generation of errors that overwhelmed the error-correcting capability of the process itself. Whether it is practically possible to utilize QEC for extending quantum coherence thus remains an open question. We answer it by demonstrating a fully stabilized and error-corrected logical qubit whose quantum coherence is significantly longer than that of all the imperfect quantum components involved in the QEC process, beating the best of them with a coherence gain of G=2.27±0.07. Here we achieve this performance by combining innovations in several domains including the fabrication of superconducting quantum circuits and model-free reinforcement learning.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Statistically bias-corrected and downscaled climate models underestimate the adverse effects of extreme heat on U.S. maize yields

Abstract Efforts to understand and quantify how a changing climate can impact agriculture often rely on bias-corrected and downscaled climate information, making it important to quantify potential biases of this approach. Here, we use a multi-model ensemble of statistically bias-corrected and downscaled climate models, as well as the corresponding parent models from the Coupled Model Intercomparison Project Phase 5 (CMIP5), to drive a statistical panel model of U.S. maize yields that incorporates season-wide measures of temperature and precipitation. We analyze uncertainty in annual yield hindcasts, finding that the CMIP5 models considerably overestimate historical yield variability while the bias-corrected and downscaled versions underestimate the largest weather-induced yield declines. We also find large differences in projected yields and other decision-relevant metrics throughout this century, leaving stakeholders with modeling choices that require navigating trade-offs in resolution, historical accuracy, and projection confidence.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

How well do self-interaction corrections repair the overestimation of static polarizabilities in density functional calculations?

Herein, we examine the effect of removing self-interaction error (SIE) on the calculation of molecular polarizabilities in the local spin density (LSDA) and generalized gradient approximations (GGA). To this end, we utilize a database of 132 molecules taken from a recent benchmark study [Hait and Head-Gordon, Phys. Chem. Chem. Phys. , 2018, 20 , 19800] to assess the influence of SIE on polarizabilities by comparing results with accurate reference data. Our results confirm that the general overestimation of molecular polarizabilities by these density functional approximations can be attributed to SIE. However, removing SIE using the Perdew–Zunger self-interaction-correction (PZ-SIC) method, implemented using the Fermi–Löwdin Orbital SIC approach, leads to an underestimation of molecular polarizabilities, showing that PZ-SIC overcorrects when combined with LSDA or GGA. Application of a recently proposed locally scaled SIC [Zope, et al., J. Chem. Phys. , 2019, 151 , 214108] is found to provide more accurate polarizabilities. We attribute this to the ability of the local scaling scheme to selectively correct for SIE in the regions of space where the correction is needed most.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Study of self-interaction errors in density functional predictions of dipole polarizabilities and ionization energies of water clusters using Perdew-Zunger and locally scaled self-interaction corrected methods

Here, we studied the effects of self-interaction error (SIE) on the static dipole polarizabilities of water clusters modelled with three increasingly sophisticated, non-empirical density functional approximations (DFAs), viz. the local spin density approximation (LDA), the Perdew-Burke-Ernzherof (PBE) generalized-gradient approximation (GGA), and the strongly constrained and appropriately normed (SCAN) meta-GGA, using the Perdew-Zunger self-interaction-correction (PZ-SIC) energy functional in the Fermi-Lowdin orbital SIC (FLO-SIC) framework. Our results show that while all three DFAs overestimate the cluster polarizabilities, the description systematically improves from LDA to PBE to SCAN. The self-correlation free SCAN predicts polarizabilities quite accurately with a mean absolute error (MAE) of 0.58 Bohr 3 with respect to coupled cluster singles and doubles (CCSD) values. Removing SIE using PZ-SIC correctly reduces the DFA polarizabilities, but over-corrects, resulting in underestimated polarizabilities in SIC-LDA, -PBE, and -SCAN. Finally, we applied a recently proposed local-scaling SIC (LSIC) method using a quasi self-consistent scheme and using the kinetic energy density ratio as an iso-orbital indicator. The results show that the LSIC polarizabilities are in excellent agreement with mean absolute error of 0.08 Bohr 3 for LSIC-LDA and 0.06 Bohr 3 for LSIC-PBE with most recent CCSD polarizabilities. Likewise, the ionization energy estimates as an absolute of highest occupied energy eigenvalue predicted by LSIC are also in excellent agreement with CCSD(T) ionization energies with MAE of 0.4 eV for LSIC-LDA and 0.04 eV for LSIC-PBE. The LSIC-LDA predictions of ionization energies are comparable to the reported GW ionization energies while the LSIC-PBE ionization energies are more accurate than reported GW results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nonlinear signal distortion corrections through quantum sensing

Having accurate gate generation is essential for precise control of a quantum system. The generated gate usually suffers from linear and nonlinear distortion. Previous works have demonstrated how to use a qubit to correct linear frequency distortions but have not commented on how to handle nonlinear distortions. This is an important issue as we show that nonlinear amplitude distortions from the RF electronics can affect Rabi pulses by as much as 10%. We present work that demonstrates how a transmon qubit can be used as a highly sensitive cryogenic detector to characterize these nonlinear amplitude distortions. We show that a correction can drive these errors down to <1% over a 700 MHz range. The correction technique provides a method to minimize the effects of signal distortions and can be easily applied to broadband control pulses to produce higher fidelity arbitrary quantum gates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Exploring and enhancing the accuracy of interior-scaled Perdew–Zunger self-interaction correction

The Perdew–Zunger self-interaction correction (PZ-SIC) improves the performance of density functional approximations for the properties that involve significant self-interaction error (SIE), as in stretched bond situations, but overcorrects for equilibrium properties where SIE is insignificant. This overcorrection is often reduced by local scaling self-interaction correction (LSIC) of the PZ-SIC to the local spin density approximation (LSDA). Here, we propose a new scaling factor to use in an LSIC-like approach that satisfies an additional important constraint: the correct coefficient of the atomic number Z in the asymptotic expansion of the exchange–correlation (xc) energy for atoms. LSIC and LSIC+ are scaled by functions of the iso-orbital indicator z σ , which distinguishes one-electron regions from many-electron regions. LSIC+ applied to the LSDA works better for many equilibrium properties than LSDA-LSIC and the Perdew, Burke, and Ernzerhof generalized gradient approximation (GGA), and almost close to the strongly constrained and appropriately normed (SCAN) meta-GGA. LSDA-LSIC and LSDA-LSIC+, however, fail to predict interaction energies involving weaker bonds, in sharp contrast to their earlier successes. It is found that more than one set of localized SIC orbitals can yield a nearly degenerate energetic description of the same multiple covalent bond, suggesting that a consistent chemical interpretation of the localized orbitals requires a new way to choose their Fermi orbital descriptors. To make a locally scaled down SIC to functionals beyond the LSDA requires a gauge transformation of the functional’s energy density. Here, the resulting SCAN-sdSIC, evaluated on SCAN-SIC total and localized orbital densities, leads to an acceptable description of many equilibrium properties including the dissociation energies of weak bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Self-interaction-corrected Kohn–Sham effective potentials using the density-consistent effective potential method

Density functional theory (DFT) and beyond-DFT methods are often used in combination with photoelectron spectroscopy to obtain physical insights into the electronic structure of molecules and solids. The Kohn–Sham eigenvalues are not electron removal energies except for the highest occupied orbital. The eigenvalues of the highest occupied molecular orbitals often underestimate the electron removal or ionization energies due to the self-interaction (SI) errors in approximate density functionals. Here, we adapt and implement the density-consistent effective potential method of Kohut, Ryabinkin, and Staroverov (2014) to obtain SI-corrected local effective potentials from the SI-corrected Fermi–Löwdin orbitals and density in the Fermi–Löwdin orbital self-interaction correction scheme. The implementation is used to obtain the density of states (photoelectron spectra) and HOMO–LUMO gaps for a set of molecules and polyacenes. Good agreement with experimental values is obtained compared to a range of SI uncorrected density functional approximations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A simple improved low temperature correction for the hierarchical equations of motion

The study of open system quantum dynamics has been transformed by the hierarchical equations of motion (HEOM) method, which gives the exact dynamics for a system coupled to a harmonic bath at arbitrary temperature and system–bath coupling strength. However, in its standard form, this method is only consistent with the weak-coupling quantum master equation at all temperatures when many auxiliary density operators are included in the hierarchy, even when low temperature corrections are included. Here, we propose a new low temperature correction scheme for the termination of the hierarchy based on Zwanzig projection, which alleviates this problem and restores consistency with the weak-coupling master equation with a minimal hierarchy. The utility of the new correction scheme is demonstrated on a range of model systems, including the Fenna–Matthews–Olson complex. The new closure is found to improve convergence of the HEOM even beyond the weak-coupling limit and is very straightforward to implement in existing HEOM codes.

Fay, Thomas P. (ORCID:000000030625731X)↗
DOE OSTI2023

Correcting aberrations of a transverse-field neutron resonance spin echo instrument

Neutron resonance spin echo (NRSE) technique has the potential to increase the Fourier time and energy resolution in neutron scattering by using radio frequency (rf) neutron spin-flippers. However, aberrations arising from variations in the neutron path length between the rf flippers reduce the polarization. Here, we develop and test a transverse static-field magnet, a series of which are placed between the rf flippers, to correct for these aberrations. The prototype correction magnet was both simulated in an NRSE beamline using McStas, a Monte Carlo neutron ray-tracing software package, and measured using neutrons. The results from the prototype demonstrate that this static-field design corrects for transverse-field NRSE aberrations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Spin-state gaps and self-interaction-corrected density functional approximations: Octahedral Fe(II) complexes as case study

Accurate prediction of a spin-state energy difference is crucial for understanding the spin crossover phenomena and is very challenging for density functional approximations, especially for local and semi-local approximations due to delocalization errors. Here, we investigate the effect of the self-interaction error removal from the local spin density approximation (LSDA) and Perdew–Burke–Ernzerhof generalized gradient approximation on the spin-state gaps of Fe(II) complexes with various ligands using recently developed locally scaled self-interaction correction (LSIC) by Zope et al. [J. Chem. Phys. 151, 214108 (2019)]. The LSIC method is exact for one-electron density, recovers the uniform electron gas limit of the underlying functional, and approaches the well-known Perdew–Zunger self-interaction correction (PZSIC) as a particular case when the scaling factor is set to unity. Our results, when compared with reference diffusion Monte Carlo results, show that the PZSIC method significantly overestimates spin-state gaps favoring low spin states for all ligands and does not improve upon density functional approximations. The perturbative LSIC-LSDA using PZSIC densities significantly improves the gaps with a mean absolute error of 0.51 eV but slightly overcorrects for the stronger CO ligands. Finally, the quasi-self-consistent LSIC-LSDA, such as coupled-cluster single double and perturbative triple [CCSD(T)], gives a correct sign of spin-state gaps for all ligands with a mean absolute error of 0.56 eV, comparable to that of CCSD(T) (0.49 eV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

How well do one-electron self-interaction-correction methods perform for systems with fractional electrons?

Recently developed locally scaled self-interaction correction (LSIC) is a one-electron SIC method that, when used with a ratio of kinetic energy densities (z σ ) as iso-orbital indicator, performs remarkably well for both thermochemical properties as well as for barrier heights overcoming the paradoxical behavior of the well-known Perdew–Zunger self-interaction correction (PZSIC) method. In this work, we examine how well the LSIC method performs for the delocalization error. Our results show that both LSIC and PZSIC methods correctly describe the dissociation of $H$$^{+}_{2}$ and $H$$^{+}_{2}$ but LSIC is overall more accurate than the PZSIC method. Likewise, in the case of the vertical ionization energy of an ensemble of isolated He atoms, the LSIC and PZSIC methods do not exhibit delocalization errors. For the fractional charges, both LSIC and PZSIC significantly reduce the deviation from linearity in the energy vs number of electrons curve, with PZSIC performing superior for C, Ne, and Ar atoms while for Kr they perform similarly. The LSIC performs well at the endpoints (integer occupations) while substantially reducing the deviation. The dissociation of LiF shows both LSIC and PZSIC dissociate into neutral Li and F but only LSIC exhibits charge transfer from Li + to F – at the expected distance from the experimental data and accurate ab initio data. Overall, both the PZSIC and LSIC methods reduce the delocalization errors substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗