Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coordination number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

PRA in Design: Increasing Confidence in Pre-Operational Assessments of Risks (Results of a Joint NASA/NRC Workshop)

In late 2009, the National Aeronautics and Space Administration (NASA) and the U.S. Nuclear Regulatory Commission (NRC) jointly organized a workshop to discuss technical issues associated with application of risk assessments to early phases of system design. The workshop, which was coordinated by the Idaho National Laboratory, involved invited presentations from a number of PRA experts in the aerospace and nuclear fields and subsequent discussion to address the following questions: (a) What technical issues limit decision-makers' confidence in PRA results, especially at a pre-operational phase of the system life cycle? (b) What is being done to address these issues'? (c) What more can be done ? The workshop resulted in participant observations and suggestions on several technical issues, including the pursuit of non-traditional approaches to risk assessment and the verification and validation of risk models. The workshop participants also identified several important non-technical issues, including risk communication with decision makers, and the integration of PRA into the overall design process.

Youngblood, Robert↗
NASA NTRS2018

Snowex 2017 Community Snow Depth Measurements: A Quality-Controlled, Georeferenced Product

Snow depth was one of the core ground measurements required to validate remotely-sensed data collected during SnowEx Year 1, which occurred in Colorado. The use of a single, common protocol was fundamental to produce a community reference dataset of high quality. Most of the nearly 100 Grand Mesa and Senator Beck Basin SnowEx ground crew participants contributed to this crucial dataset during 6-25 February 2017. Snow depths were measured along ~300 m transects, whose locations were determined according to a random-stratified approach using snowfall and tree-density gradients. Two-person teams used snowmobiles, skis, or snowshoes to travel to staked transect locations and to conduct measurements. Depths were measured with a 1-cm incremented probe every 3 meters along transects. In shallow areas of Grand Mesa, depth measurements were also collected with GPS snow-depth probes (a.k.a. MagnaProbes) at ~1-m intervals. During summer 2017, all reference stake positions were surveyed with <10 cm accuracy to improve overall snow depth location accuracy. During the campaign, 193 transects were measured over three weeks at Grand Mesa and 40 were collected over two weeks in Senator Beck Basin, representing more than 27,000 depth values. Each day of the campaign depth measurements were written in waterproof field books and photographed by National Snow and Ice Data Center (NSIDC) participants. The data were later transcribed and prepared for extensive quality assessment and control. Common issues such as protocol errors (e.g., survey in reverse direction), notebook image issues (e.g., halo in the center of digitized picture), and data-entry errors (sloppy writing and transcription errors) were identified and fixed on a point-by-point basis. In addition, we strove to produce a georeferenced product of fine quality, so we calculated and interpolated coordinates for every depth measurement based on surveyed stakes and the number of measurements made per transect. The product has been submitted to NSIDC in csv format. To educate data users, we present the study design and processing steps that have improved the quality and usability of this product. Also, we will address measurement and design uncertainties, which are different in open vs. forest areas.

Brucker, L.↗
NASA NTRSDate not supplied

LISA Activities at NASA

NASA will participate as a junior partner in the ESA-led LISA mission, which will provide the first view of the universe in milliHertz gravitational waves. While the exact set of NASA-provided contributions is still under negotiation, they are expected to include significant contributions to the LISA instrument and participation in the scientific operations of the observatory. The NASA LISA Study Office is tasked with coordinating NASA’s activities on LISA including the development of a number of technologies as candidate contributions to the LISA payload as well as collaboration with ESA and the LISA Consortium on development of the LISA spacecraft, instrument, data analysis infrastructure, and science case. This talk will provide an overview of these activities, their current status, and an outlook for progress in the near-term.

Ira Thorpe↗
NASA NTRS1983

The NCOREL computer program for 3D nonlinear supersonic potential flow computations

An innovative computational technique (NCOREL) was established for the treatment of three dimensional supersonic flows. The method is nonlinear in that it solves the nonconservative finite difference analog of the full potential equation and can predict the formation of supercritical cross flow regions, embedded and bow shocks. The method implicitly computes a conical flow at the apex (R = 0) of a spherical coordinate system and uses a fully implicit marching technique to obtain three dimensional cross flow solutions. This implies that the radial Mach number must remain supersonic. The cross flow solutions are obtained by using type dependent transonic relaxation techniques with the type dependency linked to the character of the cross flow velocity (i.e., subsonic/supersonic). The spherical coordinate system and marching on spherical surfaces is ideally suited to the computation of wing flows at low supersonic Mach numbers due to the elimination of the subsonic axial Mach number problems that exist in other marching codes that utilize Cartesian transverse marching planes.

Siclari, M. J.↗
NASA NTRS1994

The unified lunar control network: 1994 version

The objective of the unified lunar control network is to combine a series of control networks into one compatible network with its origin at the center of mass of the Moon and its coordinates referred to the mean Earth/polar axis system. The initial unified system contained 130 nearside points from Apollo data and 1026 from telescopic data. It also contained ten Mariner 10 points. The total number of points was 1166. The current network includes modifications to the past network and extends the coverage. Coordinates of points north of the Apollo region have been recomputed based on Galileo images from the second Earth-Moon flyby. Coordinates of points in the Apollo region were held fixed; however, coordinates of points north of the Apollo region in the telescopic region and many Mariner 10 points were recomputed. All of the Mariner 10 points were remeasured and integrated into the network. Additional points in the Apollo region including the farside have been added. The unified network now contains 1478 points. Apollo, Mariner 10, and Galileo pictures all contained some farside points. The coordinates of the 1478 points are available only in the microfiche supplement to this paper.

Davies, Merton E.↗
NASA NTRS1982

The origin and evolution of the coordinated data analysis workshop process

During the planning stage for the International Magnetospheric Study (IMS), it was stressed that coordinated observations among various satellites and among satellite, ground-based, balloon, and rocket (GBR) experiments were essential in obtaining the required observational data base. In the course of operating the Satellite Situation Center (SSC), it was found to be desirable to assemble a problem-oriented digital data base, consisting of a large number of physical parameters obtained from satellite and GBR sensors, in a computer system which would permit a large number of scientists to manipulate, display, discuss, study and analyze the data together in a coordinated manner. It was felt that such a process might shorten the time required to gain full scientific understanding of the observations. This approach was called the Coordinated Data Analysis Workshop (CDAW) process. Attention is given to the preliminary concept, the the initial implementation of the CDAW process, and aspects of subsequent evolution.

Vette, J. I.↗
NASA NTRS1980

Geophysical parameters of the earth-moon system

Doppler tracking data from Lunar Orbiter 4 have been combined with laser ranging data from lunar retroreflectors to yield a number of geophysical and geodetic parameters for the earth and moon. This joint solution gives values of (1) the lunar principal polar moment C/M R squared = 0.3905 plus or minus 0.0023, (2) GM(E) = 398600.461 plus or minus 0.026 cu km/sq s, and (3) an earth/moon mass ratio at 81.300587 plus or minus 0.000049. Also determined are the harmonics of a complete lunar gravity field through degree and order 5, the obliquity of the lunar pole, selenocentric coordinates of the lunar retroreflectors, geocentric coordinates of the McDonald Observatory, and the lunar secular acceleration. The lunar potential Love number is weakly determined at 0.022 plus or minus 0.013, and a suprisingly large dissipation of rotational energy is inferred, though either solid body tidal dissipation or liquid core mantle interactions could be causes.

Ferrari, A. J.↗
NASA NTRS1988

A streamwise upwind algorithm for the Euler and Navier-Stokes equations applied to transonic flows

A new algorithm was developed for the Euler and Navier-Stokes equations that uses upwind differencing based on the streawise direction. This algorithm is time accurate and can be used in codes for calculating unsteady transonic flows over wings. Such codes can be used for the flutter analysis of wings. In this algorithm, the coordinate system is locally rotated to align with the streamwise direction. For differencing the convective terms in the streamwise direction, a new form of flux splitting is employed, in which the biasing depends on the local Mach number. In the plane perpendicular to the stream direction, the new flux splitting uses the condition of no flow in that local plane. By using a locally rotated coordinate system, the convective flux vector biasing depends on the total Mach number. Hence, the switching of the flux vector biasing occurs across shock waves and the proper domain of dependence is used in supersonic regions. For comparison, many other upwind methods switch differencing based on Mach number of shock waves in multidimensional flows. The formulas for the convective flux vector differencing do not contain any user specified parameters. So, the amount of numerical dissipation is automatically determined.

Goorjian, Peter M.↗
NASA NTRS1988

A streamwise upwind algorithm for the Euler and Navier-Stokes equations applied to transonic flows

A new algorithm was developed for the Euler and Navier-Stokes equations that uses upwind differencing based on the streamwise direction. This algorithm is time accurate and can be used in codes for calculating unsteady transonic flows over wings. Such codes can be used for the flutter analysis of wings. In this algorithm, the coordinate system is locally rotated to align with the streamwise direction. For differencing the convective terms in the streamwise direction, a new form of flux splitting is employed, in which the biasing depends on the local Mach number. In the plane perpendicular to the stream direction, the new flux splitting uses the condition of no flow in that local plane. By using a locally rotated coordinate system, the convective flux vector biasing depends on the total Mach number. Hence, the switching of the flux vector biasing occurs across shock waves and the proper domain of dependence is used in supersonic regions. For comparison, many other upwind methods switch differencing based on Mach number of shock wave in multidimensional flows. The formulas for the convective flux vector differencing do not contain any user specified parameters. So, the amount of numerical dissipation is automatically determined.

Goorjian, P. M.↗
NASA NTRS1976

Numerical solutions for laminar and turbulent viscous flow over single and multi-element airfoils using body-fitted coordinate systems

The technique of body-fitted coordinate systems is applied in numerical solutions of the complete time-dependent compressible and incompressible Navier-Stokes equations for laminar flow and to the time-dependent mean turbulent equations closed by modified Kolmogorov hypotheses for turbulent flow. Coordinate lines are automatically concentrated near to the bodies at higher Reynolds number so that accurate resolution of the large gradients near the solid boundaries is achieved. Two-dimensional bodies of arbitrary shapes are treated, the body contour(s) being simply input to the program. The complication of the body shape is thus removed from the problem.

Thompson, J. F.↗
NASA NTRS1978

Measurements and analysis of farfield scattering from a prolate spheroid

The farfield acoustic scattering by a prolate spheroid with axial point sources near the tip of the body was measured. Data were taken for ka between 10 and 160, where a is the semimajor axis of the spheroid. Comparisons were made with numerical results obtained by an integral equation based on the simple-source method, with appropriate coordinate stretching introduced to permit high-frequency solutions with a minimal number of grid points. Theory and experiment agree within experimental error except for the highest frequencies in the shadow region, where very rapid changes in pressure make precise measurements difficult. The results show that for frequencies of aeroacoustic interest, the scattered field is very large and cannot be ignored.

Bayliss, A.↗
NASA NTRS1986

Radar stereomapping techniques and application to SIR-B images of Mt. Shasta

One of the goals of the SIR-B experiment was the definition of optimum radar incidence and intersection angles for radargrammetric stereoscopy by comparing the results from three separate data-reduction methods. To this end three overlapping images of the prime radargrammetric site (Mt. Shasta in northern California) were obtained, fewer than anticipated. This paper describes the mathematical basis for radar stereomapping, along with preliminary results from one of the methods (using a so-called 'analytical' stereoplotter) for the Mt. Shasta site. Height coordinate errors range from 60 to 170 m depending on the density (number per ground area) of ground control points used.

Leberl, F. W.↗
NASA NTRS1989

A parametric heat transfer study for cryogenic ball bearings in SSME HPOTP

A numerical modeling is to examine the effects of coolant convective heat transfer coefficient and frictional heating on the local temperature characteristics of a ball element in Space Shuttle Main Engine (SSME) High Pressure Oxidizer Turbopump (HPOTP) bearing. The present modeling uses a control-volume based, finite-difference method to solve the non-dimensionalized heat conduction equation in spherical coordinate system. The dimensionless temperature is found as a function of Biot number, heat flux ratio between the two race contacts, and location in the ball. The current results show that, for a given cooling capability, the ball temperature generally increases almost linearly with the heat input from the race-contacts. This increase is always very high at one of the two contacts. An increase in heat transfer coefficient generally reduces the ball temperature and alleviates the temperature gradient, except for the regions very close to the race contacts. For a 10-fold increase of heat transfer coefficient, temperature decrease is 35 percent for the average over entire ball, and 10 percent at the inner-race contact. The corresponding change of temperature gradient displays opposing trends between the regions immediately adjacent to the contacts and the remaining portion of the ball. The average temperature gradient in the vicinity of both contacts increases approximately 70 to 100 percent. A higher temperature gradient produces excessive thermal stress locally which may be detrimental to the material integrity. This, however, is the only unfavorable issue for an increase of heat transfer coefficient.

Chyu, Mingking K.↗
NASA NTRS1990

A 4-node assumed-stress hybrid shell element with rotational degrees of freedom

An assumed-stress hybrid/mixed 4-node quadrilateral shell element is introduced that alleviates most of the deficiencies associated with such elements. The formulation of the element is based on the assumed-stress hybrid/mixed method using the Hellinger-Reissner variational principle. The membrane part of the element has 12 degrees of freedom including rotational or drilling degrees of freedom at the nodes. The bending part of the element also has 12 degrees of freedom. The bending part of the element uses the Reissner-Mindlin plate theory which takes into account the transverse shear contributions. The element formulation is derived from an 8-node isoparametric element. This process is accomplished by assuming quadratic variations for both in-plane and out-of-plane displacement fields and linear variations for both in-plane and out-of-plane rotation fields along the edges of the element. In addition, the degrees of freedom at midside nodes are approximated in terms of the degrees of freedom at corner nodes. During this process the rotational degrees of freedom at the corner nodes enter into the formulation of the element. The stress field are expressed in the element natural-coordinate system such that the element remains invariant with respect to node numbering.

Aminpour, Mohammad A.↗
NASA NTRS1996

Computational Materials Research

Computational Materials aims to model and predict thermodynamic, mechanical, and transport properties of polymer matrix composites. This workshop, the second coordinated by NASA Langley, reports progress in measurements and modeling at a number of length scales: atomic, molecular, nano, and continuum. Assembled here are presentations on quantum calculations for force field development, molecular mechanics of interfaces, molecular weight effects on mechanical properties, molecular dynamics applied to poling of polymers for electrets, Monte Carlo simulation of aromatic thermoplastics, thermal pressure coefficients of liquids, ultrasonic elastic constants, group additivity predictions, bulk constitutive models, and viscoplasticity characterization.

Hinkley, Jeffrey A.↗
NASA NTRS2002

A Local Coordinate Approach in the MLPG Method for Beam Problems

System matrices for Euler-Bernoulli beam problems for the meshless local Petrov-Galerkin (MLPG) method deteriorate as the number of nodes in the beam models are consistently increased. The reason for this behavior is explained. To overcome this difficulty and improve the accuracy of the solutions, a local coordinate approach for the evaluation of the generalized moving least squares shape functions and their derivatives is proposed. The proposed approach retains the accuracy of the MLPG methods.

Raju, Ivatury S.↗
NASA NTRS2024

SUPIN: A Tool for the Aerodynamic Design and Analysis of Supersonic Inlets

The Supersonic Inlet Design and Analysis Tool (SUPIN) is a computational program that performs geometric modeling and aerodynamic design and analysis of a set of supersonic inlets whose types include the axisymmetric pitot, three-dimensional pitot, axisymmetric, two-dimensional, two-dimensional bifurcated-duct, and streamline-traced inlets. The inlets are modeled by dividing the inlet flowpath into components that start at the freestream and ends at the engine face. The primary components of the inlet include the external supersonic diffuser, throat section, and subsonic diffuser. Each component is characterized by a set of inputs that include geometric and aerodynamic factors. Examples of the geometric factors are angles, lengths, area ratios, and coordinates that describe the geometry of the components. Examples of the aerodynamic factors are Mach numbers, flow ratios, and pressure ratios that set constraints or desired aerodynamic properties of the component. These input factors are specified within a text-based input data file that is read into SUPIN. SUPIN is a Fortran 95 program that performs the inlet design and analysis as a batch or non-interactive process. SUPIN writes output data files describing the inlet geometry and aerodynamic performance. SUPIN uses analytic, empirical, and numerical methods to perform the inlet design and analysis. The inlet geometry is constructed using planar and three-dimensional geometry constructs and is represented by coordinates, angles, areas, profiles, and surfaces. Surfaces are output in the form of a Plot3D surface grid file. SUPIN does have some capability to automatically generate planar and three-dimensional, multi-block, structured grids for computational fluid dynamics (CFD) analysis. The aerodynamic analysis performed by SUPIN computes quasi-one-dimensional properties, such as Mach numbers, pressures, and temperatures, through the inlet flowpath. Planar aerodynamic properties, such as those for shock and Mach waves, are computed for the supersonic compression of the external supersonic diffuser and throat section. The inlet performance is characterized by the inlet flow rates, total pressure recovery, and inlet drag. The primary intent of this document is to describe the usage of SUPIN. The methods used within SUPIN are documented and may serve as a useful reference for understanding the aerodynamic design and analysis of supersonic inlets.

supersonic inlets↗
NASA NTRS1992

Radiated noise of ducted fans

The differences in the radiated acoustic fields of ducted and unducted propellers of the same thrust operating under similar conditions are investigated. An FEM model is created for the generation, propagation, and radiation of steady, rotor alone noise and exit guide vane interaction noise of a ducted fan. For a specified number of blades, angular mode harmonic, and rotor angular velocity, the acoustic field is described in a cylindrical coordinate system reduced to only the axial and radial directions. It is found that, contrary to the usual understanding of the Tyler and Sofrin (1962) result, supersonic tip speed rotor noise can be cut off if the tip Mach number is only slightly in excess of unity and if the number of blades is relatively small. If there are many blades, the fundamental angular mode number is large, and the Tyler and Sofrin result for thin annuli becomes more relevant. Shrouding of subsonic tip speed propellers is a very effective means of controlling rotor alone noise.

Eversman, Walter↗