Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tough and circular glass fiber composites via a tailored dynamic boronic ester interface

Glass fiber reinforced polymer (GFRP) composites are valued for their strength and cost-effectiveness. However, traditional GFRPs often face challenges for end-of-life recycling due to their non-depolymerizable thermoset matrices, and long-term performance due to inadequate interfacial adhesion, which can lead to fiber–matrix delamination. Here, in this work, we have designed dynamic fiber–matrix interfaces to allow tough and closed-loop recyclable GFRPs by utilizing a vitrimer, derived from upcycled polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS) with boronic ester (S-Bpin) and amine-based diol crosslinker. The boronic ester groups in S-Bpin form dynamic covalent bonds with the naturally present hydroxyl groups on the unsized GF surface, which eliminates the need for fiber sizing and enables facile closed-loop recyclability of both the fibers and the vitrimer matrix. The resulting strong fiber–matrix interface, depicted by the Raman mapping, leads to a 552% increase in-plane shear toughness (6.2 ± 0.3 MJ m -3 ) and 27% ultimate tensile strength (361 ± 89.2 MPa) compared to those of the conventional epoxy-based matrix (0.95 ± 0.05 MJ m -3 and 264 ± 59.7 MPa, respectively). The network rearrangement through dynamic boronic ester exchange enables fast thermoformability and repairability of micro-cracks at elevated temperatures. Additionally, both the matrix and composite demonstrate strong adhesion to various surfaces including steel and glasses exhibiting ≥6 MPa lap shear strength, which expands their suitability for diverse industrial applications. The readily created dynamic interface between boronic ester functionalized vitrimer and neat GFs presents a promising strategy for developing closed-loop recyclable, multifunctional structural materials, offering a sustainable alternative to non-recyclable thermoset GFRPs and contributes to a circular economy in composite materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mapping the end-of-life of chemicals for circular economy opportunities

Material flow analysis of chemicals in the United States highlights low recycling rates, substantial climate change and human health impacts, and the potential for a circular economy to reduce waste and drive sustainability in the chemical industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Observation of spontaneous x-ray magnetic circular dichroism in a chiral antiferromagnet

X-ray magnetic circular dichroism (XMCD) signals are usually absent in antiferromagnets. In this paper, we report the observation of spontaneous XMCD spectra originating from the inverse triangular spin structure, or the polarization of the cluster magnetic octupole, in the chiral antiferromagnet Mn 3 Sn thin film. Finally, the result is consistent with the recent theoretical predictions that the inverse triangular spin structure can give rise to finite XMCD signals in the absence of net magnetization [J. Phys. Soc. Jpn 89, 083703 (2020) and Phys. Rev. Lett. 126, 157402 (2021)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Origin of circular dichroism in resonant elastic x-ray scattering from magnetic and polar chiral structures

Circular dichroism in resonant elastic x-ray scattering (CD-REXS) has recently been observed in chiral structures composed of multiferroic materials as well as magnetic moments or electric polarization vectors. In order to comprehensively understand the experimental results of these previous studies, we present here in detail the analytical formulation of CD-REXS for one-dimensional helices composed of magnetic moments and electric polarization vectors, respectively. In particular, by comparing CD-REXS for a proper-screw-shaped Bloch-type helix and cycloid-shaped Néel-type helix, we found that CD-REXS for both magnetic and polar helices can discriminate between both types of helices. We also found that the x-ray polarization factor depending on the scattering geometry is a significant factor in determining the characteristics of CD-REXS for chiral structures. The results obtained from the detailed formulas can be intuitively understood using the concept of mirror reflection. In particular, in this way it can be understood that Bloch- and Néel-type helices correspond to truly chiral and achiral structures, respectively, and why CD-REXS is able to distinguish between these two types of helices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Novel High-Power Microwave Circulator Employing Circularly Polarized Waves

A novel four-port circulator is presented which uses an inline ferromagnetic element to allow for transmission or reflection depending on the sense of the incident circularly polarized wave. This configuration has been shown to reduce the dependency on ferrite anisotropy and support higher power, low rf loss, operation. An analytic analysis of this device is presented here alongside corroborating cold test data of the first prototype. High-power operation was performed at 2.856 GHz, with input power levels up to 8 MW for 3.5 μs in a pressurized nitrogen environment. The results from this research not only demonstrate ability to eliminate the use of greenhouse insulators, such as SF6, but also provide conceptual groundwork for a new class of ultrahigh power (50 MW+) nonreciprocal networks including circulators, isolators, phase shifters, and rf switches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Combining Agent Based Modeling and System Dynamics to Investigate the Circularity of Plastics

The United States currently produces about 1 million metric ton of ocean plastic pollution annually. One proposed solution to combat plastic waste is a circular economy (CE), which aims to transition from today's take-make-waste linear pattern of production and consumption to a system where the value of resources is maximized over time. Two key methods in industrial ecology are useful in assessing the viability of CE: (1) System Dynamics (SD) and (2) Agent Based Modeling (ABM). In prior work, the plastic life cycle was modeled with SD and ABM. The two models calculate recycling rates and costs in different ways, making it difficult to pinpoint necessary next steps. We integrate the ABM and SD models - linking the emergent patterns from micro-level human decisions to system level processes - which allows a more comprehensive understanding of feedbacks, costs, and environmental impacts. The integrated model is more accurate, and can be used to visualize recycling rates and human health and environmental impacts over time. The difference between the integrated and original SD model prompts a Sobol sensitivity analysis, which is used to understand which behavioral factors most affect plastic recycling patterns. We find that the habitual component is typically the most influential in promoting positive recycling behavior. Additionally, we utilize the combined model to understand and visualize how various behavioral intervention scenarios, like improved access to recycling programs and cart tagging, influence recycling patterns; these results can guide future policy-making.

agent-based modeling↗
DOE OSTI2023

Circular Plastics Technologies: Depolymerization of Polymers Into Parent Monomers

While most commodity plastics were not designed to easily depolymerize, some common plastics can be broken down into their parent monomers in the presence of heat, pressure, catalysts, and/or solvent. Here, we provide a high-level overview of the depolymerization technologies that have been studied and/or scaled as promising monomer-loop recycling processes for selective plastic waste streams. Namely, commodity plastics that are considered unzippable/depolymerizable include polyethylene terephthalate, polyamides, polymethyl methacrylate, and polystyrene. Monomer-loop recycling technologies are one of several pathways toward a circular economy for plastics.

circularity↗
DOE OSTI2022

Environmental and Circular Economy Implications of Solar Energy in a Decarbonized U.S. Grid

This report addresses environmental and circular economy (CE) considerations related to solar technologies via novel analysis of the three Solar Futures core scenarios as well as synthesis of published research. We organize these issues into the three basic life cycle phases of a solar technology: manufacturing, operation (including site selection and construction), and EOL. Related environmental justice issues are also explored. Finally, we recommend research and development (R&D) activities that could help clarify challenges and identify solutions. Because PV deployment is projected to be much larger than CSP deployment, we offer a more detailed analysis of PV-related issues.

14 SOLAR ENERGY↗
DOE OSTI2025

Recycling Disassembled Automotive Plastic Components for New Vehicle Components: Enabling the Automotive Circular Economy

As the automotive industry increasingly relies on plastic components to meet fuel efficiency and emissions targets, the challenge of managing end-of-life vehicle (ELV) plastics continues to grow. Currently, more than 80% of ELV plastics in the U.S. are landfilled due to limited economic incentives and technical barriers to recycling. This study examines a mechanical recycling pathway for thermoplastic components disassembled from ELVs and assesses their usability for reintegration into new vehicle parts. Four representative materials were chosen based on material labels embedded in recovered parts and aligned with their virgin industrial equivalents: polypropylene (PP), 10% talc-filled PP (PP-T10), 20% talc-filled PP (PP-T20), and a 20% glass-/mineral-filled polyamide (PA6 + GF7 + MF13). The materials underwent shredding, drying, and injection molding before being characterized by particle size analysis, density measurement, thermal analysis (TGA, DSC), mechanical testing, and heat deflection temperature (HDT) evaluation. The results in this work indicated that minor differences in crystallinity were observed and small differences between model materials and ELV materials could have contributed to these changes. Mechanical testing revealed that neat polypropylene suffered a 15–20% reduction in stiffness and tensile strength, but talc-filled polypropylene and glass/mineral-filled nylon retained >90% of their modulus, strength, and heat deflection temperature values relative to virgin controls. Differences between virgin and ELV materials could have been attributed to use life degradation, contamination during use life, or even chemical/processing differences in model materials and ELV materials. However, these findings suggest that mechanically recycled, disassembled ELV plastics can retain sufficient structural performance to support circularity efforts in the automotive sector.

automotive recycling↗
DOE OSTI2025

Circular Perspective for Utilization of Industrial Wastewaters via Phytoremediation

Wastewater generated in municipal rendering facilities requires multi-step treatment, but it may also serve as a source of nutrients and water and thus may be valorized before or instead of the necessary wastewater treatment operations. In this work, wastewaters from a composting plant were utilized to support the growth of Miscanthus x giganteus, known as both a remediation plant and an energy biomass source. A pot experiment was established to compare the effects of different wastewater doses (0, 50, 100, and 200 mL per pot per week) on the miscanthus biomass yield, phytoextraction of heavy metals, biomass heat of combustion, and plant condition. The increase in the wastewater dose resulted in increases in both biomass yield (from about 44 to 139%) and biomass heat of combustion (from 7 to 17%) when compared to the control sample, with no adverse effects on plant physiological parameters. The highest concentrations of metals were found in miscanthus grown with the highest dose of wastewaters. It was found that higher wastewater dose correlates to both higher phytoextraction and phytorecovery of metals from plant substrate and wastewaters. The highest metal uptake was identified for Fe (431 mg·pot −1 ), followed by Al, Zn, Mn, Cu, Ni, Cr. The lowest metal uptake was noted for Pb, Co and Cd (0.88, 0.11, and 0.95 mg·pot −1 , respectively). The results indicate that miscanthus can be recommended for industrial wastewater treatment. In addition, due to high absorption efficiency of the substrate components, miscanthus can be used as a remediation tool, e.g., for the ecological stabilization of remediation of metal-polluted soils, especially in municipal facilities like rendering plants. This presents a circular perspective for the valorization of post-fermentation wastewaters with subsequent growth of energy crops, with other potential benefits for the environment, such as soil treatment, absorption of CO 2 , and air purification.

Miscanthus x giganteus↗
DOE OSTI2024

A Carbon Dioxide Refinery: The Core of a Sustainable Carbon-based Circular Economy

The atmospheric carbon dioxide (CO 2 ) accumulation (2–2.5 ppmv/year) is the result of the enormous gap between its emissions (37 Gton/year) and its capture, storage, and utilization (<500 Mton/year). Climate has been dramatically affected due to the failure of natural sinks, in working effectively. To address this Gton-scale gap, numerous uses and applications are needed particularly, those consuming vast volumes of this compound and/or rendering longevous products or long lifecycle services. Thus, carbon utilization (CU) can be seen as the step to close the carbon cycle. Among CU, R&D on CO 2 chemical conversion has proposed a variety of processes, with different degrees of developmental maturity. These chemical process technologies could be efficiently and effectively integrated into refineries to upgrade emitted CO 2 . A technology pipeline consisting of a database of these processes and the technology market status should be defined based on published scientific results and patents. Then, an innovative top-down methodology is proposed to eco-design configurations of that refinery, to warrant a sustainable carbon cycle (in terms of energy, environment, and economy) and to change the ways of producing fuels, chemicals, and materials. Additionally, the proposed methodology could be used to identify research and development gaps and needs, for orienting science and technology investments and measures. Hopefully, sustainable CO 2 refineries will be implemented to close the carbon cycle of a circular C-based economy and underpin a decarbonized chemical industry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Circular Economy for Photovoltaics

NREL is working to enhance the sustainability of photovoltaic (PV) systems by increasing the energy these systems produce over their lifetimes, reducing the energy and materials consumed in their manufacture and installation, and enabling reuse or recycling. These efforts are designed to help transform the "linear economy" - where materials are simply used and disposed - into a circular one.

Circular economy↗
DOE OSTI2021

Circular Economy for Building Materials

The building sector is the one of the largest consumers of raw materials and producers of waste in the United States. NREL is working to minimize waste from building construction by conducting research on new materials, construction, and building durability, as well as developing new design principles and modeling tools. These efforts are designed to help transform the "linear economy" - where materials are simply used and disposed - into a circular one.

advanced construction methods↗
DOE OSTI2022

An Open-Source Framework for PV in the Circular Economy Evaluation

This open-source tool follows the dynamic Material and flows for each component and material in a PV system, from mining to end of life to evaluate the material and energy impacts of different paths. Following circularity principles, virgin material inputs can be offset by recovered materials to reduce impacts due to mining and extraction. Unlike consumer products, renewable energy technologies generate power over their useful life to quickly offset energy required for manufacturing. The model provides unique baselines of PV evolution, and allows us to evaluate the material and soon energy return on investment of decisions such as field repair, off-site refurbishment, reuse, or recycling. Energy layer and cost, as well as visual dashboard under development.

circular economy modeling↗
DOE OSTI2022

Circular Economy for Energy Storage

As batteries proliferate in electric vehicles, stationary storage, and other applications, NREL is exploring ways to reduce the amount of critical materials they require and increase the lifetime value of the materials they contain. These efforts are designed to help transform the "linear economy"--where materials are simply used and disposed--into a circular one.

batteries↗