Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mind the gap – Part 1: Accurately locating warm marine boundary layer clouds and precipitation using spaceborne radars

Abstract. Ground-based radar observations show that, over the eastern North Atlantic, 50 % of warm marine boundary layer (WMBL) hydrometeors occur below 1.2 km and have reflectivities of <-17 dBZ, thus making their detection from space susceptible to the extent of surface clutter and radar sensitivity. Surface clutter limits the ability of the CloudSat cloud profiling radar (CPR) to observe the true cloud base in ~52 % of the cloudy columns it detects and true virga base in ~80 %, meaning the CloudSat CPR often provides an incomplete view of even the clouds it does detect. Using forward simulations, we determine that a 250 m resolution radar would most accurately capture the boundaries of WMBL clouds and precipitation; that being said, because of sensitivity limitations, such a radar would suffer from cloud cover biases similar to those of the CloudSat CPR. Observations and forward simulations indicate that the CloudSat CPR fails to detect 29 %–43 % of the cloudy columns detected by ground-based sensors. Out of all configurations tested, the 7 dB more sensitive EarthCARE CPR performs best (only missing 9.0 % of cloudy columns) indicating that improving radar sensitivity is more important than decreasing the vertical extent of surface clutter for measuring cloud cover. However, because 50 % of WMBL systems are thinner than 400 m, they tend to be artificially stretched by long sensitive radar pulses, hence the EarthCARE CPR overestimation of cloud top height and hydrometeor fraction. Thus, it is recommended that the next generation of space-borne radars targeting WMBL science should operate interlaced pulse modes including both a highly sensitive long-pulse mode and a less sensitive but clutter-limiting short-pulse mode.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Large eddy simulation of atmospheric boundary layer flow over complex terrain in comparison with RANS simulation and on-site measurements under neutral stability condition

Large eddy simulation (LES) of the atmospheric boundary layer (ABL) flow over complex terrain is presented with a validation using meteorological tower (met-tower) data through an improved neutral stability sampling approach. The proposed stability sampling procedure includes a condition based on the most-likely occurrence time-periods of the neutral ABL and reduces the variabilities of the conditional wind statistics calculated at the met-towers in comparison to our previous work. The ABL flow simulations are carried out over a potential wind site with a prominent hill based using the OpenFOAM-based simulator for on/off-shore wind farm applications by applying the Lagrangian-averaged scale-invariant dynamic sub-grid scale turbulence model. A low-dissipative scale-selective discretization scheme for the non-linear convection term in the LES governing equation is adopted implicitly to ensure both the second-order accuracy and bounded solution. The LES inflow is generated through a precursor method with a “tiling” approach based on the flow driving parameters obtained from a corresponding Reynolds-averaged Navier–Stokes (RANS) simulation. Overall, the averaged wind velocity profiles predicted by the LES approach at all met-tower locations show a similar tendency as the RANS results, which are also in reasonable agreement with the met-tower data. An obvious difference in wind speed standard deviation profiles is seen between LES and RANS, especially at regions downstream of the hill edge, where the LES shows under-predicted results at the highest measurement levels in comparison to the tower data. The computational costs of the LES are found to be about 20 times higher than the RANS simulations.

Energy & Fuels↗
DOE OSTI2025

High-Fidelity Simulations of a Mach 9 Shock-Turbulent Boundary Layer Interaction

High-fidelity large-eddy simulations (LES) and wall-modeled large-eddy simulations (WMLES) are performed on the interaction of a Mach 9 turbulent boundary layer with a 34-degree compression ramp. Our primary interest is the sensitivity of mean and unsteady wall quantities to grid density. Additionally within the context of WMLES, we seek to explore solution sensitivity to the wall-model exchange location.

42 ENGINEERING↗
DOE OSTI2023

African smoke particles act as cloud condensation nuclei in the wintertime tropical North Atlantic boundary layer over Barbados

Abstract. The number concentration and properties of aerosol particles serving as cloud condensation nuclei (CCN) are important for understanding cloud properties, including in the tropical Atlantic marine boundary layer (MBL), where marine cumulus clouds reflect incoming solar radiation and obscure the low-albedo ocean surface. Studies linking aerosol source, composition, and water uptake properties in this region have been conducted primarily during the summertime dust transport season, despite the region receiving a variety of aerosol particle types throughout the year. In this study, we compare size-resolved aerosol chemical composition data to the hygroscopicity parameter κ derived from size-resolved CCN measurements made during the Elucidating the Role of Clouds–Circulation Coupling in Climate (EUREC4A) and Atlantic Tradewind Ocean-Atmosphere Mesoscale Interaction Campaign (ATOMIC) campaigns from January to February 2020. We observed unexpected periods of wintertime long-range transport of African smoke and dust to Barbados. During these periods, the accumulation-mode aerosol particle and CCN number concentrations as well as the proportions of dust and smoke particles increased, whereas the average κ slightly decreased (κ=0.46±0.10) from marine background conditions (κ=0.52±0.09) when the submicron particles were mostly composed of marine organics and sulfate. Size-resolved chemical analysis shows that smoke particles were the major contributor to the accumulation mode during long-range transport events, indicating that smoke is mainly responsible for the observed increase in CCN number concentrations. Earlier studies conducted at Barbados have mostly focused on the role of dust on CCN, but our results show that aerosol hygroscopicity and CCN number concentrations during wintertime long-range transport events over the tropical North Atlantic are also affected by African smoke. Our findings highlight the importance of African smoke for atmospheric processes and cloud formation over the Caribbean.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Profiling the molecular destruction rates of temperature and humidity as well as the turbulent kinetic energy dissipation in the convective boundary layer

A simultaneous deployment of Doppler, temperature, and water-vapor lidars is able to provide profiles of molecular destruction rates and turbulent kinetic energy (TKE) dissipation in the convective boundary layer (CBL). Horizontal wind profiles and profiles of vertical wind, temperature, and moisture fluctuations are combined, and transversal temporal autocovariance functions (ACFs) are determined for deriving the dissipation and molecular destruction rates. These are fundamental loss terms in the TKE as well as the potential temperature and mixing ratio variance equations. These ACFs are fitted to their theoretical shapes and coefficients in the inertial subrange. Error bars are estimated by a propagation of noise errors. Sophisticated analyses of the ACFs are performed in order to choose the correct range of lags of the fits for fitting their theoretical shapes in the inertial subrange as well as for minimizing systematic errors due to temporal and spatial averaging and micro- and mesoscale circulations. We demonstrate that we achieve very consistent results of the derived profiles of turbulent variables regardless of whether 1 or 10 s time resolutions are used. We also show that the temporal and spatial length scales of the fluctuations in vertical wind, moisture, and potential temperature are similar with a spatial integral scale of ≈160 m at least in the mixed layer (ML). The profiles of the molecular destruction rates show a maximum in the interfacial layer (IL) and reach values of ϵ m ≃ 7 x 10 -4 g 2 kg −2 s −1 for mixing ratio and ϵ θ ≃ 1.6 x 10 -3 K 2 s −1 for potential temperature. In contrast, the maximum of the TKE dissipation is reached in the ML and amounts to ≃ 10 -2 m 2 s −3 . We also demonstrate that the vertical wind ACF coefficient k w ∝ $\overline{w'^{2}}$ and the TKE dissipation ϵ ∝ ($\overline{w'^{2}}$) 3/2 . For the molecular destruction rates, we show that ϵ m ∝ $\overline{m'^{2}}$ ($\overline{w'^{2}}$) 1/2 and ϵ θ ∝ $\overline{θ'^{2}}$ ($\overline{w'^{2}}$) 1/2 . These equations can be used for parameterizations of ϵ, ϵ m , and ϵ θ . All noise error bars are derived by error propagation and are small enough to compare the results with previous observations and large-eddy simulations. The results agree well with previous observations but show more detailed structures in the IL. Consequently, the synergy resulting from this new combination of active remote sensors enables the profiling of turbulent variables such as integral scales, variances, TKE dissipation, and the molecular destruction rates as well as deriving relationships between them. The results can be used for the parameterization of turbulent variables, TKE budget analyses, and the verification of large-eddy simulations.

dissipation rate↗
DOE OSTI2026

Observations of the Marine Atmospheric Boundary Layer’s Response to a Solar Eclipse

The atmospheric response to the solar eclipse of 8 April 2024 in North America is investigated with a specific focus on the marine atmospheric boundary layer (MABL). We leverage measurements collected during the Third Wind Forecast Improvement Project (WFIP3), including Doppler lidars, sonic anemometers, and thermodynamic profiler data to investigate the atmospheric response across sites that experienced partial eclipse conditions with nearly 90% obscuration. Using these measurements, we examine eclipse-induced changes in key meteorological parameters, such as temperature, wind speed, and turbulent fluxes. Most previous eclipse studies have been conducted over land, whereas this study provides new observations for both coastal and marine environments, offering additional insight into eclipse-driven variability in the MABL. The findings confirm a notable decrease in downwelling shortwave radiation during the eclipse, which results in rapid cooling of surface air. The temperature reduction ranges from $1.2^\circ \text {C}$ to $1.4^\circ \text {C}$ in coastal regions and from $0.3^\circ \text {C}$ to $0.5^\circ \text {C}$ over the ocean. This analysis suggests that the MABL’s higher thermal inertia compared to coastal regions moderates the temperature decrease during the eclipse. Wind speed exhibits a more complex behavior, as it is influenced by both the MABL and preexisting synoptic conditions. Although a reduction in wind speed is observable up to approximately 140 m above ground level (AGL) at more inland sites, at other locations closer to the coast, this reduction is constrained to the lowest 100 m AGL. Turbulence parameters retrieved from sonic anemometers, such as turbulence kinetic energy, turbulent heat flux, and friction velocity, decrease during the eclipse at coastal sites, accompanied by a brief transition of atmospheric stability from unstable to neutral or weakly stable conditions. For the open-ocean sites, the variability in turbulence statistics and atmospheric stability is minimal during the occurrence of the eclipse.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Using MARCUS, MICRE, and COMBLE data to improve understanding and modeling of cloud, aerosol, and boundary layer processes at high-latitudes

Because it is believed general circulation (GCM) and numerical weather prediction (NWP) models underestimate shortwave radiation over the Southern Ocean (SO) due to inadequate representations of boundary layer (BL) and cloud processes, it is critical to improve our understanding of key aerosol, cloud, precipitation, and BL processes. Over the north Atlantic Ocean (NA), cold-air outbreaks are common, yet few studies of the aerosol and environmental controls of the associated convective BL clouds exist as needed to develop and evaluate GCM representations. Although processes cannot be observed, cloud and aerosol properties can be measured in-situ or remotely retrieved, which when combined with numerical simulations enable process level understanding required to improve model representations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Implementation of a Three-Dimensional Planetary Boundary Layer Parameterization in a Coupled Modeling System and Evaluation of "Gray Zone" Simulations of a Wind-Wave Event Off the US California Coast Using Observations

A three-dimensional (3D) planetary boundary layer (PBL) parameterization was added to the Coupled Ocean Atmosphere Wave Sediment Transport (COAWST) model and the first coupled atmosphere/wave "gray zone" simulations were carried out using the 3D PBL parameterization. A case study of a significant wind-wave event from 4-8 November 2020 off the US west coast was examined, with a focus on the impacts of the event within an approximate 280x280 km central California coastal region covering the Bureau of Ocean Energy Management Morro Bay wind energy lease area. Simulations with both one-dimensional (1D; Yonsei University) and 3D PBL parameterizations were examined in this nest with ..delta..x=400 m. Two-way coupling was active, with near-surface winds feeding back to the wave model and bulk wave statistics feeding back to the atmospheric model. Both simulations compared favorably with buoy observations in capturing the timing and magnitude of wind speed, temperature, dewpoint, and significant wave height, as the front associated with the maritime weather system moved southward across coastal California. However, wind speed errors over land were larger. Time series of the vertical profile of winds below z=250 m from the simulations compared favorably with observations from the US Dept. of Energy Morro Bay Doppler lidar buoy. Differences between the coupled 1D and 3D PBL simulations were minor. The most notable difference was that the simulation using the 3D PBL parameterization had approximately 10 % weaker winds at the peak of the event causing 10 % lower significant wave heights. This difference was shown to be mostly due to differences in the vertical mixing treatment between the parameterizations, in particular the nonlocal downward mixing of higher momentum air in the 1D Yonsei University parameterization in convective conditions. Overall, this work demonstrates that the 3D PBL parameterization can be used in a coupled atmosphere/wave modeling framework with similar behaviors as traditional PBL parameterizations that do not provide horizontal turbulent variances and fluxes.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Spatially distributed atmospheric boundary layer properties in Houston – A value-added observational dataset

Abstract In 2022, Houston, TX became a nexus for field campaigns aiming to further our understanding of the feedbacks between convective clouds, aerosols and atmospheric boundary layer (ABL) properties. Houston’s proximity to the Gulf of Mexico and Galveston Bay motivated the collection of spatially distributed observations to disentangle coastal and urban processes. This paper presents a value-added ABL dataset derived from observations collected by eight research teams over 46 days between 2 June - 18 September 2022. The dataset spans 14 sites distributed within a ~80-km radius around Houston. Measurements from three types of instruments are analyzed to objectively provide estimates of nine ABL parameters, both thermodynamic (potential temperature, and relative humidity profiles and thermodynamic ABL depth) and dynamic (horizontal wind speed and direction, mean vertical velocity, updraft and downdraft speed profiles, and dynamical ABL depth). Contextual information about cloud occurrence is also provided. The dataset is prepared on a uniform time-height grid of 1 h and 30 m resolution to facilitate its use as a benchmark for forthcoming numerical simulations and the fundamental study of atmospheric processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Deep-learning-driven simulations of boundary layer clouds over the Southern Great Plains

Abstract. Based on long-term observations at the Southern Great Plains site by the Atmospheric Radiation Measurement (ARM) program for training and validation, a deep-learning model is developed to simulate the daytime evolution of boundary layer clouds (BLCs) from the perspective of land–atmosphere coupling. The model takes ARM measurements (including early-morning soundings and diurnally varying surface meteorological conditions and heat fluxes) as inputs and predicts hourly estimates (including cloud occurrence, the positions of cloud boundaries, and the vertical profile of the cloud fraction) as outputs. The deep-learning model offers good agreement with the observed cloud fields, especially in the accuracy with which cloud occurrence and base height are reproduced. When the inputs are substituted by reanalysis data from ERA5 and MERRA-2, the outputs of the deep-learning model provide a better agreement with observation than the cloud fields extracted from ERA5 and MERRA-2 themselves. Thus, the deep-learning model shows great potential to serve as a diagnostic tool for the performance of physics-based models in simulating stratiform and cumulus clouds. By quantifying biases in clouds and attributing them to the simulated atmospheric state variables versus the model-parameterized cloud processes, this observation-based deep-learning model may offer insights into the directions needed to improve the simulation of BLCs in physics-based models for weather forecasting and climate prediction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Boundary Layer Height Variation over the Savannah River Site during a Heat Wave

With the number of heat waves expect to increase in both in their severity and frequency in the coming years, an insight into their impact on planetary boundary layer (PBL) heights is essential for one development of future emergency and safety plans. Using High-Resolution Rapid Refresh (HRRR) atmospheric model output, an analysis is done on the effects a heat wave has on PBL heights and temperature inversions across the Savannah River Site (SRS). This study showed that due to its adjacency to anthropogenic land use, SRS experiences a non-negligible gradient in its PBL height, with higher heights to the northwest. The singular location PBL heigh measurement and forecasts for SRS do not account for this gradient, which has potential implications on pollutant and smoke dispersion onsite. During a heat wave this gradient is present but PBL heights are less impacted than surrounding developed areas, possibly attributable to the woody wetlands that surround the Savannah River's banks. Additionally, the heat wave appears to strongly enhance the nocturnal temperature inversions that the site and surrounding areas experience. This is possibly due to increased stability from higher pressure conditions, which are often associated with heat waves. This influence on nocturnal inversions, however, is limited to their intensity, leaving their timing relatively unaltered. The impact a heat wave has on PBL heights and temperature inversions across SRS is seen to be more dependent on adjacent land use and features rather than the unique land use types onsite.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Structure of the thermal boundary layer in turbulent channel flows at transcritical conditions

Enhanced fluctuations, steep gradients, and intensified heat transfer are characteristics of wall-bounded turbulence at transcritical conditions. Although such conditions are prevalent in numerous technical applications, the structure of the thermal boundary layer under realistic density gradients and heating conditions remains poorly understood. Specifically, statistical descriptions of the temperature field in such flows are provided inconsistently using existing models. To address this issue, direct numerical simulations are performed by considering fully developed transcritical turbulent channel flow at pressure and temperature conditions that cause density changes of a factor of up to $O(20)$ between the hot and cold walls. As a consequence of the proximity of the Widom line to the hot wall, significant asymmetries are observed when comparing regions near the cold wall and near the hot wall. Previous transformations that attempt to collapse the near-wall mean temperature profiles among different cases to a single curve are examined. By addressing model deficiencies of these transformations, a formulation for an improved mean temperature transformation is proposed, with appropriate considerations for real fluid effects that involve strong variations in thermodynamic quantities. Our proposed transformation is shown to perform well in collapsing the slope of the logarithmic region to a single universal value with reduced uncertainty. Coupled with a predictive framework to estimate the non-universal shift parameter of the logarithmic region using a priori information, our transformation provides an analytic profile to model the near-wall mean temperature. These results thus provide a framework to guide the development of models for wall-bounded transcritical turbulence.

42 ENGINEERING↗
DOE OSTI2022

The Influence of Dust-Smoke Mixtures on Boundary Layer Processes and Nocturnal Warming in the Sahel

Using a single column model with ground-based, aircraft, and satellite data sets we assess the combined role of smoke and dust aerosols, land degradation/aridization (LDA), and their impact on the planetary boundary layer (PBL) in influencing near-surface air temperature over the Sahel. Our study is unique because it assesses the combined role of smoke and dust aerosols on PBL evolution and near-surface air temperatures during both day and nighttime. More importantly, using a theoretical framework, we provide a careful explanation of the geophysical processes responsible for the changes in PBL and near-surface air temperature. Our results indicate that during northern hemisphere winter months, dust, and smoke over Sahel radiatively combine to impact the PBL. We show that aerosol mixtures dominated by dust modify PBL height in a manner that minimizes/maximizes surface layer cooling/warming at times when daytime maximum/nocturnal minimum temperatures occur. Furthermore, we find that increasing smoke contribution to total column aerosol optical extinction counteracts nighttime warming through daytime cooling. When smoke constitutes half or more of to the total column aerosol optical extinction, the ratio of longwave to shortwave radiative forcing is less than 10%, and nighttime cooling ensues. Minimum temperature is most sensitive to changes in mid-visible aerosol optical depth (AOD) values <1 and doubling of dust AOD within this range during the 1950–1980 Sahelian LDA event is estimated to have a nocturnal warming potential of 0.6°C.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

High-resolution simulations of a turbulent boundary layer impacting two obstacles in tandem

High-fidelity large-eddy simulations of the flow around two rectangular obstacles are carried out at a Reynolds number of 10 000 based on the freestream velocity and the obstacle height. The incoming flow is a developed turbulent boundary layer. Mean-velocity components, turbulence fluctuations, and the terms of the turbulent-kinetic-energy budget are analyzed for three flow regimes: skimming flow, wake interference, and isolated roughness. Three regions are identified where the flow undergoes the most significant changes: the first obstacle’s wake, the region in front of the second obstacle, and the region around the second obstacle. In the skimming-flow case, turbulence activity in the cavity between the obstacles is limited and mainly occurs in a small region in front of the second obstacle. In the wake-interference case, there is a strong interaction between the freestream flow that penetrates the cavity and the wake of the first obstacle. Furthermore, this interaction results in more intense turbulent fluctuations between the obstacles. In the isolated-roughness case, the wake of the first obstacle is in good agreement with that of an isolated obstacle. Separation bubbles with strong turbulent fluctuations appear around the second obstacle.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Thermodynamic and kinematic drivers of atmospheric boundary layer stability in the central Arctic during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC)

Observations collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) provide a detailed description of the impact of thermodynamic and kinematic forcings on atmospheric boundary layer (ABL) stability in the central Arctic. This study reveals that the Arctic ABL is stable and near-neutral with similar frequencies, and strong stability is the most persistent of all stability regimes. MOSAiC radiosonde observations, in conjunction with observations from additional measurement platforms, including a 10 m meteorological tower, ceilometer, microwave radiometer, and radiation station, provide insight into the relationships between atmospheric stability and various atmospheric thermodynamic and kinematic forcings of ABL turbulence and how these relationships differ by season. We found that stronger stability largely occurs in low-wind (i.e., wind speeds are slow), low-radiation (i.e., surface radiative fluxes are minimal) environments; a very shallow mixed ABL forms in low-wind, high-radiation environments; weak stability occurs in high-wind, moderate-radiation environments; and a near-neutral ABL forms in high-wind, high-radiation environments. Surface pressure (a proxy for synoptic staging) partially explains the observed wind speeds for different stability regimes. Cloud frequency and atmospheric moisture contribute to the observed surface radiation budget. Unique to summer, stronger stability may also form when moist air is advected from over the warmer open ocean to over the colder sea ice surface, which decouples the colder near-surface atmosphere from the advected layer, and is identifiable through observations of fog and atmospheric moisture.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The sensitivity of the Fitch wind farm parameterization to a three-dimensional planetary boundary layer scheme

Abstract. Wind plant wake impacts can be estimated with a number of simulation methodologies, each with its own fidelity and sensitivity to model inputs. In turbine-free mesoscale simulations, hub-height wind speeds often significantly vary with the choice of a planetary boundary layer (PBL) scheme. However, the sensitivity of wind plant wakes to a PBL scheme has not been explored because, as of the Weather Research and Forecasting model v4.3.3, wake parameterizations were only compatible with one PBL scheme. We couple the Fitch wind farm parameterization with the new NCAR 3DPBL scheme and compare the resulting wakes to those simulated with a widely used PBL scheme. We simulate a wind plant in pseudo-steady states under idealized stable, neutral, and unstable conditions with matching hub-height wind speeds using two PBL schemes: MYNN and the NCAR 3DPBL. For these idealized scenarios, average hub-height wind speed losses within the plant differ between PBL schemes by between −0.20 and 0.22 m s−1, and correspondingly, capacity factors range between 39.5 %–53.8 %. These simulations suggest that PBL schemes represent a meaningful source of modeled wind resource uncertainty; therefore, we recommend incorporating PBL variability into future wind plant planning sensitivity studies as well as wind forecasting studies.

17 WIND ENERGY↗
DOE OSTI2020

Large contribution of organics to condensational growth and formation of cloud condensation nuclei (CCN) in the remote marine boundary layer

Marine low clouds strongly influence global climate, and their radiative effects are particularly susceptible to the concentration of cloud condensation nuclei (CCN). One major source of CCN is the condensational growth of pre-CCN particles, and sulfate has long been considered the major condensing species in the remote marine boundary layer. While some studies have suggested that secondary organic species can contribute to particle growth, its importance remains unclear. Here we present the first long-term observational evidence that organics play an important role in particle growth over remote oceans. To the contrary of traditional thinking, sulfate dominated condensational growth for only a small (~18 %) fraction of the 62 observed growth events, even fewer than the organic-dominated events (24 %). During most (58 %) growth events, the major condensing species included both organics and sulfate. Potential precursors of the secondary organics are volatile organic compounds from ocean biological activities and those produced by the air–sea interfacial oxidation. Our results indicate that the condensation of secondary organics contributes strongly to the growth of pre-CCN particles and thereby the CCN population over remote oceans.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Cloud processing of dimethyl sulfide (DMS) oxidation products limits sulfur dioxide (SO 2 ) and carbonyl sulfide (OCS) production in the eastern North Atlantic marine boundary layer

Dimethyl sulfide (DMS) is the major sulfur species emitted from the ocean. The gas-phase oxidation of DMS by hydroxyl radicals proceeds through the stable, soluble intermediate hydroperoxymethyl thioformate (HPMTF), eventually forming carbonyl sulfide (OCS) and sulfur dioxide (SO 2 ). Recent work has shown that HPMTF is efficiently lost to marine boundary layer (MBL) clouds, thus arresting OCS and SO 2 production and their contributions to new-particle formation and growth events. To date, no long-term field studies exist to assess the extent to which frequent cloud processing impacts the fate of HPMTF. Here, we present 6 weeks of measurements of the cloud fraction and the marine sulfur species methanethiol, DMS, and HPMTF made at the Atmospheric Radiation Measurement (ARM) research facility on Graciosa Island, Azores, Portugal. Using an observationally constrained chemical box model, we determine that cloud loss is the dominant sink of HPMTF in this region of the MBL during the study, accounting for 79 %–91 % of HPMTF loss on average. When accounting for HPMTF uptake to clouds, we calculate campaign average reductions in DMS-derived MBL SO 2 and OCS of 52 %–60 % and 80 %–92 % for the study period. Using yearly measurements of the site- and satellite-measured 3D cloud fraction and DMS climatology, we infer that HPMTF cloud loss is the dominant sink of HPMTF in the eastern North Atlantic during all seasons and occurs on timescales faster than what is prescribed in global chemical transport models. Accurately resolving this rapid loss of HPMTF to clouds has important implications for constraining drivers of MBL new-particle formation.

54 ENVIRONMENTAL SCIENCES↗